Dynamic response analysis of the submarine suspended pipeline impacted by dropped objects based on LS-DYNA

Based on ANSYS/LS-DYNA, the dynamics analysis software, and using nonlinear dynamic finite element method, the process of a submarine pipeline impacted by dropped objects is simulated, Some conclusions are drawn： First, the damage depth of suspended pipe is smaller than that of the bare pipe in case of the same fall energy, and with the increase of fall energy, the difference grows; Second, with the falling object＇s speed and mass rising, the deformation of pipeline intensifies at the impact site and the maximum vibration amplitude of submarine pipeline increases; Third, when the fall energy is equal, the smaller the contact area of falling objects and pipeline is, the greater the damage depth of pipeline becomes; Fourth, changes of seabed soil parameters （shear elastic modulus, internal friction angle, density） have less influence on the suspended pipeline＇s dent depths and maximum vibration amplitude,

Preliminary Study on Evaluation System of Capability of Composites to Withstand Impact

This paper summarizes the authors’ experimental study on the characterization system of composite behavior to withstand impact. The content includes: (1)The dent depth is the best parameter describing the impact damage state. (2) There exists the knee point phenomenon for damage resistance behavior (i.e. the relationship between impact energy or contact force and dent depth) and damage tolerance behavior (i.e. the relationship between dent depth and compressive failure strain or stress) of composite laminates. (3) The physical meaning of the knee point phenomenon is that the failure mechanisms change of damaged composites to fiber breakage in the first front plies from matrix crack and delamination. Some suggestions on the characterization system of composite behavior to withstand impact were proposed.

Parametric study on single shot peening by dimensional analysis method incorporated with finite element method

Shot peening is a widely used surface treatment method by generating compressive residual stress near the surface of metallic materials to increase fatigue life and re- sistance to corrosion fatigue, cracking, etc. Compressive re- sidual stress and dent profile are important factors to eval- uate the effectiveness of shot peening process. In this pa- per, the influence of dimensionless parameters on maximum compressive residual stress and maximum depth of the dent were investigated. Firstly, dimensionless relations of pro- cessing parameters that affect the maximum compressive residual stress and the maximum depth of the dent were de- duced by dimensional analysis method. Secondly, the in- fluence of each dimensionless parameter on dimensionless variables was investigated by the finite element method. Fur- thermore, related empirical formulas were given for each di- mensionless parameter based on the simulation results. Fi- nally, comparison was made and good agreement was found between the simulation results and the empirical formula, which shows that a useful approach is provided in this pa- per for analyzing the influence of each individual parameter.