Depositional process of hyperpycnal flow deposits:A case study on Lower Cretaceous Sangyuan outcrop in the Luanping Basin,Northeast China

Sedimentary process research is of great significance for understanding the distribution and characteristics of sediments.Through the detailed observation and measurement of the Sangyuan outcrop in Luanping Basin,this paper studies the depositional process of the hyperpycnal flow deposits,and divides their depositional process into three phases,namely,acceleration,erosion and deceleration.In the acceleration phase,hyperpycnal flow begins to enter the basin nearby,and then speeds up gradually.Deposits developed in the acceleration phase are reverse.In addition,the original deposits become unstable and are taken away by hyperpycnal flows under the eroding force.As a result,there are a lot of mixture of red mud pebbles outside the basin and gray mud pebbles within the basin.In the erosion phase,the reverse deposits are eroded and become thinner or even disappear.Therefore,no reverse grading characteristic is found in the proximal major channel that is closer to the source,but it is still preserved in the middle branch channel that is far from the source.After entering the deceleration phase,normally grading deposits appear and cover previous deposits.The final deposits in the basin are special.Some are reverse,and others are normal.They are superimposed with each other under the action of hyperpycnal flow.The analysis of the Sangyuan outcrop demonstrates the sedimentary process and distribution of hyperpycnites,and reasonably explain the sedimentary characteristics of hyperpycnites.It is helpful to the prediction of oil and gas exploration targets in gravity flow deposits.

Sedimentary Processes and Depositional Characteristics of Coarse-grained Subaqueous Fans along Steep Slopes in a Lacustrine Rift Basin:A Case Study from the Dongying Depression,Bohai Bay Basin,China

Coarse-grained subaqueous fans are vital oil and gas exploration targets in the Bohai Bay basin,China.The insufficient understanding of their sedimentary processes,depositional patterns,and controlling factors restricts efficient exploration and development.Coarse-grained subaqueous fans in the Yong′an area,Dongying Depression,are investigated in this study.These fans include nearshore subaqueous fans,and sublacustrine fans,and their sedimentary processes,depositional patterns and distribution characteristics are mainly controlled by tectonic activity and paleogeomorphology.Nearshore subaqueous fans developed near the boundary fault during the early–middle deposition stage due to strong tectonic activity and large topographic subsidence.Early sublacustrine fans developed at the front of the nearshore subaqueous fans in the area where the topography changed from gentle to steep along the source direction.While the topography was gentle,sublacustrine fans did not develop.During the late weak tectonic activity stage,late sublacustrine fans developed with multiple stages superimposed.Frequent fault activity and related earthquakes steepened the basin margin,and the boundary fault slopes were 25.9°–34°.During the early–middle deposition stage,hyperpycnal flows triggered by outburst floods developed.During the late deposition stage,with weak tectonic activity,seasonal floods triggered hyperpycnal flows,and hybrid event beds developed distally.

Depositional Environment of Sediments in Tonle Sap Sedimentary Basin, Western Part of Cambodia: Insights from Field and Geochemical Studies

Tonle Sap sedimentary basin was considered a favorable geological condition for hydrocarbon accumulation in the onshore Cambodia. Two exposure outcrops in Battambang province, called Somlout and Takream, were selected to represent sediments in this basin. The sedimentology and geochemistry studies provide insights into the depositional environment of sediments using field investigation, lithological, sedimentological, paleontological, and geochemical analysis. The redox condition, water column, and depositional setting were analyzed by plotting the ratio of V vs. Cr, Uauthigenic vs. V/Cr, Sr vs. Ba, Ca vs. (Fe + Ca), and Fe2O3/TiO2 vs. Al2O3/(Al2O3 + Fe2O3) diagram. Moreover, these diagrams can be used to predict depositional conditions as well. Based on the results, Somlout and Takream comprise calcareous shale and limestone facies. The geochemical analysis showed that Somlout calcareous shale samples were deposited in the dysoxic freshwater of the lake setting during the regression, while Somlout limestones and Takream were deposited in high salinity seawater, oxic condition of shallow-marine water. In addition, Somlout limestones consist of fragmental fusulinid foraminifera, bivalve shelve, and bryozoan, which suggest a barrier environment. Meanwhile, Teakream consists of fine-grained calcareous shale, and lime-mudstone, which are presented to form in the quiet marine setting of the lagoon environment. Therefore, the Tonle Sap basin sediments were deposited in the Somlout area’s barrier and lake environment, and the lagoon environment for Takream.

Sedimentary facies and depositional model of shallow water delta dominated by fluvial for Chang 8 oil-bearing group of Yanchang Formation in southwestern Ordos Basin,China

A systematic analysis of southwestern Ordos Basin's sedimentary characteristics,internal architectural element association styles and depositional model was illustrated through core statistics,well logging data and outcrop observations in Chang 8 oil-bearing group.This analysis indicates that shallow water delta sediments dominated by a fluvial system is the primary sedimentary system of the Chang 8 oil-bearing group of the Yanchang Formation in southwestern Ordos Basin.Four microfacies with fine grain sizes are identified: distributary channels,sheet sandstone,mouth bar and interdistributary fines.According to the sandbody's spatial distribution and internal architecture,two types of sandbody architectural element associations are identified: amalgamated distributary channels and thin-layer lobate sandstone.In this sedimentary system,net-like distributary channels at the delta with a narrow ribbon shape compose the skeleton of the sandbody that extends further into the delta front and shades into contiguous lobate distribution sheet sandstone in the distal delta front.The mouth bar is largely absent in this system.By analyzing the palaeogeomorphology,the palaeostructure background,sedimentary characteristics,sedimentary facies types and spatial distribution of sedimentary facies during the Chang 8 period,a distinctive depositional model of the Chang 8 shallow water fluvial-dominated delta was established,which primarily consists of straight multi-phase amalgamated distributary channels in the delta plain,net-like distributary channels frequently diverting and converging in the proximal delta front,sheet sandstones with dispersing contiguous lobate shapes in the distal delta front,and prodelta or shallow lake mudstones.

Sedimentary system characteristics and depositional filling model of Upper Permian——Lower Triassic in South Yellow Sea Basin

In the South Yellow Sea Basin,Mesozoic–Paleozoic marine strata are generally well developed with large thickness,and no substantial breakthroughs have been made in hydrocarbon exploration.Through research,it is believed that the Upper Permian–Lower Triassic can be regarded as a long-term base-level cycle.Based on drilling data,characteristics of the lithology–electric property combination cyclicity,and the special lithology,the long-term base-level cycle was divided into five medium-term base-level cycles(MC1–MC5).On this basis,the Permian–Triassic sedimentary systems and their filling model were analyzed in accordance with the change of base-level cycle and transition of sedimentary environment,as well as characteristics of the drilling sedimentary facies and seismic facies.The results show that there were six sedimentary systems(fluvial,delta,tidal flat,open platform,restricted platform,and continental shelf)developed in the Upper Permian–Lower Triassic,the sedimentary systems were distributed such that the water was deep in the northwest and shallow in the southeast,and there were two base-level cycle filling models(a relatively stable tidal flat facies and a rapidly transgressive continental shelf facies to stable platform facies)developed in the Upper Permian–Lower Triassic.These models can provide a basis for evaluation of the Mesozoic–Paleozoic hydrocarbon geology in the South Yellow Sea Basin.

Depositional features and sedimentary model of Buqu Stage in Mid-Jurassic in Qangtang Basin, Xizang (Tibet), China

The largest Mesozoic northward transgression in Qangtang Basin of Qinghai-Xizang (Tibet) Plateau occurred during the Buqu Stage, Middle Jurassic. Mainly filled with carbonate rocks, the whole basin is composed of transgression-regression sedimentary cycle. Field outcrops and indoor analysis revealed 8 types of sedimentary facies markers in this region. 4 types of sedimentary facies have been recognized: platform facies, platform marginal facies, foreslope facies and basin facies. Influenced by the northern Lazhuglung-Jinshajiang suture zone, central uplift region and southern Bangongco-Nujiang suture zone, these facies belts extended east-west. The sedimentary model was established based on observed depositional features. From their biological features and sedimentary characteristics, it is suggested that the paleoclimate was warm and humid at that time. The Buqu Formation is a promising target for oil and gas exploration in Shuanghu-Duoyong area in future.

Investigation of the Petrological and Geochemical Characteristics of Siderite in the Early Cretaceous Sandstone of Lacustrine Sedimentary Sequence in the Erlian Basin from Northeastern China

Siderite is a prevalent authigenic mineral in siliciclastic rocks, which usually occurred in eodiagensis period and could be used as an indicator of sedimentary environment. Some siderite precipitated in burial depth with geochemical information of basin fluid evolution. The crystal morphology, geochemical composition, and isotope values are influenced by physical and geochemical environment of precipitation. In this study, samples from the Early Cretaceous of Erlian basin in the northwestern China were collected, and mineralogy, bulk and in-situ geochemistry, C and O isotopes were analyzed to comprehensively investigate the sedimentary and diagenetic environment that the sediments experienced. Six lithofaices with three types of crystal habits were recognized in the siderite-rich sandstone, bundle crystal in spherical forms, blocky rhombs in intergranular pore and cleavage of muscovite, and micro bundle and mosaic crystals aggregates in nodular. The siderite growth proceeds through micro bundle and mosaic crystals to bundle siderite aggregates and then into blocky rhombs. The crystal evolution is also reflected by geochemical composition. The micro bundle and mosaic crystals are Casiderite. The spheritic shaped bundle aggregates are Ca-Mn-siderite. The blocky rhomb siderite shows gray part and bight part with Ca, Mg and Mn varies. Increase of Ca in block rhomb siderite suggests burial and mesodiagenesis, the high content of Mn may have linkage with eogenetic effects. The relatively positive and slightly negative δ13C value indicates meteoric water domination and influence of organic matter evolution in shallow buried time. The narrow ranges negative δ18O value suggest a small span of temperature of siderite formation.

Late Carboniferous-Early Permian Sequence Stratigraphy and Depositional Evolution in the Northeast Ordos Basin,North China

Sequence stratigraphical analysis was applied to the Upper Carboniferous-Lower Permian sedimentary succession of the northeastern Ordos Basin, north China based on data acquired from ten entire logging curves and eight outcrops. The facies framework of the lithostratigraphical unit, the Taiyuan Formation comprises seven facies in two facies associations, varying from fluvio-delta to shelf-barrier islands. The facies are presented within a chronostratigraphical framework, linked by systems tract, which in turn are limited by flooding surfaces and sequence boundaries. Six third-order depositional sequences are recognised, bounded by six type 2 unconformities. An upwards-shallowing epicontinental sea sedimentary model is created, which consists of a sandstone, coal seam and carbonate succession.

Sedimentary dynamics and depositional model for mud accumulation in deep lake basins:A case study in the Upper Triassic Chang-7 Member,Ordos Basin,northern China

Shales in deep lake basins have become the main focus of continental shale oil and gas exploration.In order to highlight the sedimentary dynamics of mud deposition in deep lake basins,a combination of core observation,thin section examination,X-ray diffraction,and QEMSCAN(quantitative evaluation of minerals by scanning electron microscopy)was used to analyze the depositional characteristics of mudrocks in the Chang-7 Member from the Yanchang Formation(Upper Triassic)in Ordos Basin,and to establish a depositional model for mud accumulation in deep lake basins.This study recognizes four mudrock lithofacies in the Chang-7 Member:(1)the laminated silt-bearing mudstone,which generally develops a binary composition of“silt-clay”or a ternary composition of“silt-clay-organic matter”;(2)the graded mudstone,mainly composed of dark gray and gray-black mudstone sandwiched by silt-bearing mudstone;(3)the massive mudstone,internally showing a uniform distribution of quartz,clay,and carbonate minerals,with also a small amount of organic detritus;and(4)the laminated shale,which is generally composed of clay laminae,and organic laminae of the former two.Sediment supply,topographic slope,and flood intensity combine to control the evolution of gravity flows and the transport and deposition of the mudrock in the Chang-7 Member.The influence of orogeny provides terrain gradient,water depth,abundant sediments at source areas,and triggering mechanism for the formation of gravity flows.Floods triggered by wetting events provide the impetus for sediment transport.Mud deposition in the Chang-7 Member was mainly related to the transport and sedimentation of mud by hyperpycnal flows and rapid sedimentation by buoyant plume flocculation.A comprehensive evolutionary model for shale accumulation in the deep lake basin is established by integrating various triggering mechanisms and mud transport sedimentary processes.

Metallogeny of the Lannigou Sedimentary Rock-hosted Disseminated Gold Deposit in Southwestern Guizhou Province,China

The Lannigou deposit is a large-sized sedimentary rock-hosted disseminated gold （SRHDG） deposit located in the Youjiang Basin. It is hosted by the Middle Triassic turbidite. Wall rock alterations, including silicification, pyritization, arsenopyritization, carbonatization and argillization, commonly occur along fractures. PGE study demonstrates that either Permian basalts or Triassic ultrabasic intrnsives are unlikely to be the main source of gold mineralization. Coupled with the lack of other nmgmatic activity in the vicinity of the mining area, an amagmatic origin is proposed. Organic matter compositions and GC-MS analysis of the ores and host rocks show that the organics in the ores and the host rocks have a common source; the organic matter in the ores was mainly indigenous. The positive correlation between S2 and Au contents, along with the common occurrence of organic inclusions, suggest involvement of organic matter in the ore-forming process in terms of promoting Au leaching from the source rocks, making colloidal Au migration possible, as well as hydrocarbon reduction of sulphate. Geological and geochemical characteristics of the Lannigou deposit suggest that it was formed through circulation of meteoric water and probably less importantly organic bearing formation water driven by high geothermal gradient caused by late Yanshanian extension, which leached Au from the source bed, and then migrated as Au-bisnlfides and colloidal Au, culminating in deposition by reduction-adsorption and surface complexation of gold onto the growth surface of arsenlan pyrite.

Early Silurian Wuchuan–Sihui–Shaoguan exhalative sedimentary pyrite belt, South China: constraints from zircon dating for K-bentonite of the giant Dajiangping deposit

The Wuchuan-Sihui-Shaoguan(WSS)exhalative sedimentary pyrite belt in the southwestern part of the Qinzhou-Hangzhou(Qin-Hang)belt is the most important sulfur industry base in China.However,a wide range of metallogenetic ages spanning from Ediacaran to Devonian has been reported in the literature.This age range does not support the idea that the typical character of"coeval mineralization"in an exhalative sedimentary mineralization belt in China and worldwide.Therefore,the precise determination of mineralization ages of representative deposits is necessary to provide guides for exploration and metallogenetic models.The Dajiangping pyrite deposit is a typical example of this kind of deposits and is also the largest deposit with a proven reserve of 210 Mt.This deposit was thought to have formed in Ediacaran or Devonian.In this study,2-3 layers of 10-25 cm thick 2M1-type microcrystalline muscovite slate abruptly embedded in the No.Ⅳmassive orebody of the deposit has been identified to be low-grade metamorphic K-bentonite.A Concordia zircon LA-ICP-MS U-Pb age of 432.5±1.3 Ma(mean standard weighted deviation of concordance and equivalence=1.2;N=11)has been yielded for the low-grade metamorphic K-bentonite.This age is distinctly different from the Rb-Sr isochron age of630.1±7.3 Ma for siliceous rock at the top of the No.Ⅲbanded orebody and the Re-Os isochron age of 389±62 Ma for pyrites from a laminated orebody.Instead,it is close to the intercept age(429 Ma)of the youngest detrital zircons from sandstone interlayers of the No.Ⅲbanded orebody.The Concordia age is also coincident with those of the Late Caledonian(400-460 Ma)magmatism-metamorphism events which are widely distributed in Cathaysia Block.Particularly,it agrees well with that of the Early Silurian extensional volcanism(434-444 Ma)which have been revealed in the Dabaoshan,Siqian-Hekou,and Nanjing volcanic basins in northern Guangdong Province and southern Jiangxi Province.Hence,the dating result in this study confirms that the sedimentary time of the ore-host Daganshan Formation is Early Silurian,and implies that the mineralization age of the Dajiangping pyrite deposit should also be Early Silurian.In combination with the Early Silurian age of Shezui pyrite deposit and the Dabaoshan volcanic basin along the WSS pyrite belt,it could be inferred that the WSS pyrite belt provides a record of the northern expanding of Qinzhou-Fangcheng trough in Early Silurian and that the exhalative pyrite mineralization was triggered by the postcollisional extension of the margin of Cathaysia Block after the intracontinental collision between Cathaysia Block and Yangtze Block during Late Caledonian stage.

The Features of Sedimentary Facies and Copper Enrichment Metallogenic Regularities of Kuzigongsu Group in Sareke Glutenite Type Copper Deposits,Wuqia,Xinjiang

1 Introduction Sareke glutenite-type copper deposit is the large size copper deposit discovered in recent years,and it is located Sarekebayi intracontinental pull-apart basin in the western margin of the Tarim basin.Conglomerate of

Facies Analysis, Depositional Environment and Diagenetic Features of the Qom Formation in the Saran Semnan, Central Iran

In this study, to identify and analyze facies of depositional environment and depositional model of Qom Formation, stratigraphic Saran Section (southwest of Semnan) was selected. Qom Formation in Saran section includes about 380 meters of conglomerate at the base, chalk, limestone, marl, and shale. Petrographic studies with facies analysis have led to the identification of 12 microfacies, these microfacies have been deposited in four facies groups including tidal flat, lagoon, barrier and open marine. Study of horizontal and vertical facies changes and their comparison with recent and ancient environments reveals that Qom Formation in this section relates to shallow marine environment and its facies were deposited in a shelf carbonate platform and are comparable with contemporary shelf platforms such as Florida and old shelf platforms such as Mozduran. The most important diagenetic processes affecting the studied section include micritization, bioturbation, cementation, dissolution, neomorphism, fracturing, mechanical and chemical compaction, hematitization and dolomitization. These processes have formed in marine, meteoric and burial diagenetic environments.

Sea-floor exhalative sedimentary and magmatic hydrothermal superimposition on the Bainiuchang polymetallic deposit in Yunnan Province: REE geochemical evidence

In order to study the characteristics of sea-floor exhalative sedimentary and magmatic hydrothermal superimposition on the Bainiuchang polymetallic deposit, the REE compositions of the granites, host-rocks and ores have been systematically analyzed by ICP-MS. As viewed from their REE compositions, the granites show obvious negative Eu anomalies and weak negative Ce anomalies. According to their REE characteristics, the host-rocks were derived partly from sea-floor exhalative sediments. In terms of their REE compositions, the ores can be divided into two groups: one group, of which the samples were collected from the Baiyang segment relatively far away from the Bozhushan granite batholith, possesses positive Eu anomalies or no Eu anomaly and negative Ce anomalies, indicating that ore-forming hydrothermal fluid was relatively reductive and its temperature was higher than 250 ℃. Furthermore, the coinstantaneous presence of positive Eu anomalies and negative Ce anomalies indicate that the convective mixing of a little amount of seawater with hydrothermal fluid had happened while ores were precipitated on ancient sea floor. The other group, of which the samples were mainly collected from the Chuanxindong and Duimenshan segments near the Bozhushan granite batholith, has similar chondrite-monalized REE distribution patterns to those of the magmatic rocks. But as a whole, the REE characteristics of both groups change gradually starting from the Bozhushan granite batholith. Based on the REE characteristics of the granites, host-rocks and ores, it is suggested that the ore-forming metals seem to have come from several different sources.

A Preliminary Study on Fluid Inclusions and Mineralization of Xitieshan Sedimentary-Exhalative (SEDEX) Lead-Zinc Deposit

The Xitieshan lead-zinc deposit is located at the northern margin of the Qaidam Basin, Qinghai Province, China, and had developed a complete marine sedimentary-exhalative system. Our preliminary study of ore-forming fluids shows that fluid inclusions in quartz from altered stockwork rocks that represent the pipe facies have a wide range of temperature and salinity. The intense fluid activities are characteristics of the pipe facies of the exhalative system. Fluid inclusions in carbonates near the unstratified ore bodies hosted in the thick-bedded marble which represents vent-proximal facies are large in size and have moderate to high temperatures. They represent unerupted sub-seafloor fluid activity. Fluids in altered stockwork rocks and carbonates have similar H20-NaCI-CO2 system, both belonging to the sedimentary-exhalative system. The fluids migrate from the pipe facies to the unstratified ore bodies. Boiling of the fluids causes the separation of CO2 vapor and liquid H2O. When the fluids migrate into the unconsolidated thick-bedded marble, the escape of CO2, decreasing temperature and pressure as well as some involvement of seawater into the fluids result in the unmixing of fluids with high and low salinity and deposition of ore-forming materials. The two unmixed fluids were trapped in unconsolidated carbonates and the ore-forming materials were deposited in the unconsolidated carbonates to form the sedimentary-exhalative type unstratified ore bodies. The oreforming temperature of unstratified ore bodies is up to high temperature indicating that there is a huge ore-forming potential in its deep.

Characteristics of deep water depositional system in Campos basin, Brazil

To make clear about the sedimentary facies types and distribution of deep water sandstone reservoirs in Campos basin of Brazil,this paper researches the characteristics of deep-water sedimentary system in Campos basin through the comprehensive analysis of drilling,logging and seismic data.There are 3 subfacies and 7 microfacies in the study area.There are 3 channels from south to north in Upper Cretaceous Maastrichtian,and the sedimentary incised valley and compound channels developed in micro-salt basin are the main deep water depositional types.The Paleocene to Eocene dominated by sedimentary incised valley and eroded compound channel deposits,also include 3 channel systems.From Oligocene to Miocene,the main deposition type is lobe,which is mainly distributed in central-north of the basin.Corresponding to deep water depositional stages,3 kinds of depositional models are found.From Turonian to Maastrichtian of Upper Cretaceous,with tectonic uplift,strong source material supply,and the negative topography produced by salt rock movement providing favorable accommodation for sand deposition,the depositional model was terrigenous direct feed mechanism with sedimentary incised valley and compound channels in micro salt basin.From Paleocene to Eocene,as the amplitude of tectonic uplift reached the maximum and the accompanied erosion peaked,accommodation space offered by micro salt basin was leveled up;the depositional model was terrigenous direct feed mechanism with sedimentary valley and incised compound channels.From Oligocene to Miocene,because of sable tectonics,sea level fluctuation is the main controlling factor for deep water deposition,so the depositional model was wide shelf indirect feed mechanism with bypass incised valley and lobe.The analysis of the characteristics and controlling factors of the 3 types deep-water sedimentary systems during 3 different stages in Campos Basin can provide valuable reference for the oil exploration in deep-water deposits in the Campos Basin and across the world.

Genesis of granular calcite in lacustrine fine-grained sedimentary rocks and its indication to volcanichydrothermal events: A case study of Permian Lucaogou Formation in Jimusar Sag, Junggar Basin, NW China

Granular calcite is an authigenic mineral in fine-grained sedimentary rocks.Core observation,thin section observation,cathodoluminescence analysis,fluid inclusion analysis,scanning electron microscope(SEM),and isotopic composition analysis were combined to clarify the genesis of granular calcite in the lacustrine fine-grained sedimentary rocks of the Permian Lucaogou Formation in the Jimusar Sag,Junggar Basin.It is found that the granular calcite is distributed with laminated characteristics in fine-grained sedimentary rocks in tuffite zones(or the transitional zone between tuffite and micritic dolomite).Granular calcite has obvious cathodoluminesence band,and it can be divided into three stages.Stage-Ⅰ calcite,with non-luminesence,high content of Sr element,inclusions containing Cos,and homogenization temperature higher than 170℃,was directly formed from the volcanic-hydrothermal deposition.Stage-Ⅱ calcite,with bright yellow luminescence,high contents of Fe,Mn and Mg,enrichment of light rare earth elements(LREEs),and high homogenization temperature,was formed by recrystallization of calcareous edges from exhalative hydrothermal deposition.Stage-IlI calcite,with dark orange luminescence band,high contents of Mg,P,V and other elements,no obvious fractionation among LREEs,and low homogenization temperature,was originated from diagenetic transformation during burial.The granular calcite appears regularly in the vertical direction and its formation temperature decreases from the center to the margin of particles,providing direct evidences for volcanic-hydrothermal events during the deposition of the Lucaogou Formation.The volcanic-hydrothermal event was conducive to the enrichment of organic matters in fine-grained sedimentary rocks of the Lucaogrou Formation,and positive to the development of high-quality source rocks.The volcanic-hydrothermal sediments might generate intergranular pores/fractures during the evolution,creating conditions for the self-generation and self-storage of shale oil.

山西中条山宋家山钴铁矿床钴的赋存状态及成矿规律

宋家山钴铁矿床位于中条山地区东南缘“同善天窗”的中部,容矿岩石主要为古元古代宋家山群绛道沟组火山-沉积岩系。钴铁矿体受地层岩性控制,呈SN向层状展布。金属矿物主要为磁铁矿、黄铁矿、黄铜矿、硫铜钴矿和硫钴矿,非金属矿物主要为石英、方解石、绢云母和绿泥石。矿石构造以块状、似条带状、浸染状、团块状和细脉状为主。黄铁矿和黄铜矿多呈浸染状和细脉状分布。围岩蚀变主要包括硅化、绢云母化、黄铁矿化、碳酸盐化和绿泥石化等。钴铁矿体的形成主要包括沉积、变质和热液三个期次。矿石显微镜观察、硫化物扫描电镜和电子探针分析,表明钴元素主要赋存在硫铜钴矿、硫钴矿和黄铁矿中。黄铁矿特征元素Co/Ni比值主要集中在100~1000之间,个别比值小于100,反映硫化物的形成主体与热液活动有关。硫化物原位硫同位素组成δ^(34) S在12‰~16‰之间,低于元古代海水硫酸盐的δ^(34) S值(15‰~20‰),揭示热化学还原(TSR)在海水硫酸盐还原过程中起到关键作用。综合研究表明宋家山矿床富钴矿体的形成经历了初始火山-沉积、造山期间含钴变质流体沿片理构造充填交代、造山后期热液活动的叠加等过程。由此认为宋家山矿床成因类型属沉积-变质热液叠加型钴铁矿床。

Multi-Order and Multi-Center Metallogenic Zoning of Yinshan Cu-Au Polymetallic Ore Deposit,Jiangxi Province,China

Yinshan anticline is the product of tectono-dynamic deformation - metamorphism .Along the axis of the anticline exists a brittle-ductile shearing zone which obviously controls the ore-formation . Mineralization occurs along the axis of the anticline in a width of about 1000m .In the mining area .volcano- subvolcanic rocks of Early Yanshan period are divided into three cycles :Ⅰ intermediate acidic dacite lava and dacite porphyry ;Ⅱ acidic amphibole liparite and quartz porphyry;Ⅲ intermediate andesite porphyrite . Among them activities of ⅠandⅡ cycles are more intensive and are intimately related to the mineralization . Yinshan ore deposit is the result of combinative processes of tectono -dynamic and volcano -magmatic hydrothermal fluids, so that mere are two centers of metallogenic zoning, one being the axial strain zone of Yinshan anticline which is the center of first order, and the other being porphyry stock , 2nd order.