Distribution and geochemical significance of alkylbenzenes for crude oil with different depositional environments and thermal maturities

A total of 45 alkylbenzenes were detected and identified in crude oils with different depositional environments and thermal maturities from the Tarim Basin,Beibuwan Basin,and Songliao Basin using comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry(GC×GCTOFMS).By analyzing the distribution characteristics of C0-C5alkylbenzenes,it is found that the content of some alkylbenzenes varies greatly in crude oils.Based on the distribution characteristics of 1,2,4,5-tetramethylbenzene(Te MB)and 1,2,3,4-Te MB,the ratio of 1,2,4,5-Te MB to 1,2,3,4-Te MB is proposed to indicate the organic matter origin and depositional environment of ancient sediments.Oil samples originated mainly from lower hydrobiont,algae,bacteria and source rocks deposited under reducing/anoxic conditions have low 1,2,4,5-/1,2,3,4-Te MB values(less than 0.6),while oil samples originated mainly from terrestrial higher plants and source rocks deposited under oxic/sub-oxic conditions have higher 1,2,4,5-/1,2,3,4-Te MB values(greater than 1.0).The significant difference of 1,2,4,5-/1,2,3,4-Te MB values is controlled by 1,2,4,5-Te MB content.1,2,4,5-Te MB content in oils derived from source rocks deposited in oxidized sedimentary environment(greater than 1.0 mg/g whole oil)is higher than that in oils from source rocks deposited in reduced sedimentary environment(less than 1.0 mg/g whole oil).1,2,4,5-/1,2,3,4-Te MB ratio might not or slightly be affected by evaporative fractionation,biodegradation and thermal maturity.1,2,4,5-/1,2,3,4-Te MB ratio and 1,2,4,5-Te MB content can be used as supplementary parameter for the identification of sedimentary environment and organic matter input.It should be noted that compared to the identification of organic matter sources,the 1,2,4,5-/1,2,3,4-Te MB parameter is more effective in identifying sedimentary environments.

Geochemistry and depositional environment of fuchsite quartzites from Sargur Group,western Dharwar Craton,India

Meso-Neoarchean fuchsite quartzites are present in different stratigraphic positions of Dharwar Craton including the oldest(~3.3 Ga)Sargur Group of western Dharwar Craton.The present study deals with the petro-graphic and geochemical characteristics of the fuchsite quartzites from the Ghattihosahalli belt to evaluate their genesis,depositional setting and the enigma involved in the ancient sedimentation history.Their major mineral assemblages include quartz,fuchsite,and feldspars along with accessory kyanite and rutile.The geochemical com-positions are characterized by high SiO_(2),Al_(2)O_(3),low MgO,CaO,strongly enriched Cr(1326–6899 ppm),Ba(1165–3653 ppm),Sr(46–210 ppm),V(107–868 ppm)and Zn(11–158 ppm)contents compared to the upper continental crust(UCC).The UCC normalized rare earth element(REE)patterns are characterized by depleted light REE[(La/Sm)UCC=0.33–0.95]compared to heavy REE[(Gd/Yb)_(UCC)=0.42–1.65]with conspicuous positive Eu-anomalies(Eu/Eu^(*)=1.35–18.27)characteristic of hydrothermal solutions evidenced through the interlayered barites.The overall major and trace element systematics reflect a combined mafic-felsic provenance and suggest their deposition at a passive continental margin environ-ment.The comprehensivefield,petrographic,and geo-chemical studies indicate that these quartzites are infiltrated by Cr-richfluids released during high-grade metamorphism of associated ultramafic rocks.The Sargur and the subse-quent Dharwar orogeny amalgamated diverse lithounits from different tectonic settings,possibly leading to the release of Cr-richfluids and the formation of fuchsite quartzite during or after the orogeny.Thesefindings sug-gest a pre-existing stable crust prior to the Sargur Group and the link between orogenic events and various mineral deposits in the Dharwar Craton.

Depositional process of hyperpycnal flow deposits:A case study on Lower Cretaceous Sangyuan outcrop in the Luanping Basin,Northeast China

Sedimentary process research is of great significance for understanding the distribution and characteristics of sediments.Through the detailed observation and measurement of the Sangyuan outcrop in Luanping Basin,this paper studies the depositional process of the hyperpycnal flow deposits,and divides their depositional process into three phases,namely,acceleration,erosion and deceleration.In the acceleration phase,hyperpycnal flow begins to enter the basin nearby,and then speeds up gradually.Deposits developed in the acceleration phase are reverse.In addition,the original deposits become unstable and are taken away by hyperpycnal flows under the eroding force.As a result,there are a lot of mixture of red mud pebbles outside the basin and gray mud pebbles within the basin.In the erosion phase,the reverse deposits are eroded and become thinner or even disappear.Therefore,no reverse grading characteristic is found in the proximal major channel that is closer to the source,but it is still preserved in the middle branch channel that is far from the source.After entering the deceleration phase,normally grading deposits appear and cover previous deposits.The final deposits in the basin are special.Some are reverse,and others are normal.They are superimposed with each other under the action of hyperpycnal flow.The analysis of the Sangyuan outcrop demonstrates the sedimentary process and distribution of hyperpycnites,and reasonably explain the sedimentary characteristics of hyperpycnites.It is helpful to the prediction of oil and gas exploration targets in gravity flow deposits.

Depositional model of the Member Deng-2 marginal microbial mound-bank complex of the Dengying Formation in the southwestern Sichuan Basin, SW China: Implications for the Ediacaran microbial mound construction and hydrocarbon exploration

Recent advances in hydrocarbon exploration have been made in the Member Deng-2 marginal microbial mound-bank complex reservoirs of the Dengying Formation in the western Sichuan Basin, SW China,where the depositional process is regarded confusing. The microfacies, construction types, and depositional model of the Member Deng-2 marginal microbial mound-bank complex have been investigated using unmanned aerial vehicle photography, outcrop section investigation, thin section identification,and seismic reflections in the southwestern Sichuan Basin. The microbialite lithologic textures in this region include thrombolite, dendrolite, stromatolite, fenestral stromatolite, spongiostromata stone,oncolite, aggregated grainstone, and botryoidal grapestone. Based on the comprehensive analysis of“depositional fabrics-lithology-microfacies”, an association between a fore mound, mound framework,and back mound subfacies has been proposed based on water depth, current direction, energy level and lithologic assemblages. The microfacies of the mound base, mound core, mound flank, mound cap, and mound flat could be recognized among the mound framework subfacies. Two construction types of marginal microbial mound-bank complex have been determined based on deposition location, mound scale, migration direction, and sedimentary facies association. Type Jinkouhe microbial mound constructions(TJMMCs) develop along the windward margin owing to their proximity to the seaward subfacies fore mound, with a northeastwardly migrated microbial mound on top of the mud mound,exhibiting the characteristics of large-sized mounds and small-sized banks in the surrounding area. Type E'bian microbial mound constructions(TEMMCs) primarily occur on the leeward margin, resulting from the presence of onshore back mound subfacies, with the smaller southwestward migrated microbial mounds existing on a thicker microbial flat. The platform margin microbial mound depositional model can be correlated with certain lateral comparison profile and seismic reflection structures in the 2D seismic section, which can provide references for future worldwide exploration. Microbial mounds with larger buildups and thicker vertical reservoirs are typically targeted on the windward margin, while small-sized microbial mounds and flats with better lateral connections are typically focused on the leeward margin.

Depositional Environment and Lithofacies Analyses of Eocene Lacustrine Shale in the Bohai Bay Basin:Insights from Mineralogy and Elemental Geochemistry

The effect of various depositional parameters including paleoclimate,paleosalinity and provenance,on the depositional mechanism of lacustrine shale is very important in reconstructing the depositional environment.The classification of shale lithofacies and the interpretation of shale depositional environment are key features used in shale oil and gas exploration and development activity.The lower 3rd member of the Eocene Shahejie Formation(Es_(3)^(x)shale)was selected for this study,as one of the main prospective intervals for shale oil exploration and development in the intracratonic Bohai Bay Basin.Mineralogically,it is composed of quartz(avg.9.6%),calcite(avg.58.5%),dolomite(avg.7%),pyrite(avg.3.3%)and clay minerals(avg.20%).An advanced methodology(thin-section petrography,total organic carbon and total organic sulfur contents analysis,X-ray diffraction(XRD),X-ray fluorescence(XRF),field-emission scanning electron microscopy(FE-SEM))was adopted to establish shale lithofacies and to interpret the depositional environment in the lacustrine basin.Six different types of lithofacies were recognized,based on mineral composition,total organic carbon(TOC)content and sedimentary structures.Various inorganic geochemical proxies(Rb/Sr,Ca/(Ca+Fe),Ti/Al,Al/Ca,Al/Ti,Zr/Rb)have been used to interpret and screen variations in depositional environmental parameters during the deposition of the Es_(3)^(x)shale.The experimental results indicate that the environment during the deposition of the Es_(3)^(x)shale was warm and humid with heightened salinities,moderate to limited detrital input,higher paleohydrodynamic settings and strong oxygen deficient(reducing)conditions.A comprehensive depositional model of the lacustrine shale was developed.The interpretations deduced from this research work are expected to not only expand the knowledge of shale lithofacies classification for lacustrine fine-grained rocks,but can also offer a theoretical foundation for lacustrine shale oil exploration and development.

Sedimentary Processes and Depositional Characteristics of Coarse-grained Subaqueous Fans along Steep Slopes in a Lacustrine Rift Basin:A Case Study from the Dongying Depression,Bohai Bay Basin,China

Coarse-grained subaqueous fans are vital oil and gas exploration targets in the Bohai Bay basin,China.The insufficient understanding of their sedimentary processes,depositional patterns,and controlling factors restricts efficient exploration and development.Coarse-grained subaqueous fans in the Yong′an area,Dongying Depression,are investigated in this study.These fans include nearshore subaqueous fans,and sublacustrine fans,and their sedimentary processes,depositional patterns and distribution characteristics are mainly controlled by tectonic activity and paleogeomorphology.Nearshore subaqueous fans developed near the boundary fault during the early–middle deposition stage due to strong tectonic activity and large topographic subsidence.Early sublacustrine fans developed at the front of the nearshore subaqueous fans in the area where the topography changed from gentle to steep along the source direction.While the topography was gentle,sublacustrine fans did not develop.During the late weak tectonic activity stage,late sublacustrine fans developed with multiple stages superimposed.Frequent fault activity and related earthquakes steepened the basin margin,and the boundary fault slopes were 25.9°–34°.During the early–middle deposition stage,hyperpycnal flows triggered by outburst floods developed.During the late deposition stage,with weak tectonic activity,seasonal floods triggered hyperpycnal flows,and hybrid event beds developed distally.

Diversity of depositional architecture and sandbody distribution of sublacustrine fans during forced regression: A case study of Paleogene Middle Sha 3 Member in Dongying Sag, Bohai Bay Basin, East China

Currently, the differences in gravity flow deposits within different systems tracts in continental lacustrine basins are not clear. Taking the middle submember of the third member of Paleogene Shahejie Formation(Sha 3 Member) in the Shishen 100 area of the Dongying Sag in the Bohai Bay Basin as an example, the depositional architecture of sublacustrine fans during forced regression and the impact of the fourth-order base-level changes on their growth were investigated using cores, well logs and 3D seismic data. Sublacustrine fans were mainly caused by hyperpycnal flow during the fourth-order base-level rise, while the proportion of slump-induced sublacustrine fans gradually increased during the late fourth-order base-level fall. From rising to falling of the fourth-order base-level, the extension distance of channels inside hyperpycnal-fed sublacustrine fans reduced progressively, resulting in the transformation in their morphology from a significantly channelized fan to a skirt-like fan. Furthermore, the depositional architecture of distributary channel complexes in sublacustrine fans changed from vertical aggradation to lateral migration, and the lateral size of individual channel steadily decreased. The lobe complex's architectural patterns evolved from compensational stacking of lateral migration to aggradational stacking, and the lateral size of individual lobe steadily grew. This study deepens the understanding of depositional features of gravity flow in high-frequency sequence stratigraphy and provides a geological foundation for the fine development of sublacustrine fan reservoirs.

Depositional Environment of Sediments in Tonle Sap Sedimentary Basin, Western Part of Cambodia: Insights from Field and Geochemical Studies

Tonle Sap sedimentary basin was considered a favorable geological condition for hydrocarbon accumulation in the onshore Cambodia. Two exposure outcrops in Battambang province, called Somlout and Takream, were selected to represent sediments in this basin. The sedimentology and geochemistry studies provide insights into the depositional environment of sediments using field investigation, lithological, sedimentological, paleontological, and geochemical analysis. The redox condition, water column, and depositional setting were analyzed by plotting the ratio of V vs. Cr, Uauthigenic vs. V/Cr, Sr vs. Ba, Ca vs. (Fe + Ca), and Fe2O3/TiO2 vs. Al2O3/(Al2O3 + Fe2O3) diagram. Moreover, these diagrams can be used to predict depositional conditions as well. Based on the results, Somlout and Takream comprise calcareous shale and limestone facies. The geochemical analysis showed that Somlout calcareous shale samples were deposited in the dysoxic freshwater of the lake setting during the regression, while Somlout limestones and Takream were deposited in high salinity seawater, oxic condition of shallow-marine water. In addition, Somlout limestones consist of fragmental fusulinid foraminifera, bivalve shelve, and bryozoan, which suggest a barrier environment. Meanwhile, Teakream consists of fine-grained calcareous shale, and lime-mudstone, which are presented to form in the quiet marine setting of the lagoon environment. Therefore, the Tonle Sap basin sediments were deposited in the Somlout area’s barrier and lake environment, and the lagoon environment for Takream.

Palaeogeomorphology and its control on the development of sequence stratigraphy and depositional systems of the Early Silurian in the Tarim Basin

The Silurian in the Tarim Basin was deposited on the basement deformed by the Caledonian tectonic movements at the end of the Late Ordovician. The development and distribution of sedimentary sequences of the Early Silurian have been clearly controlled by the palaeogeomorphology of the Late Ordovician. Based on unconformity characteristics and distribution of erosion, several zones can be differentiated including a high uplifted erosion zone, a transitional slope zone and a depression zone. The central and west Tabei Uplift zones show high angular unconformity and intense erosion. The Tarim Basin in the late Ordovician shows characteristics of higher in the west, lower in the east while higher in the south, lower in the north. The Early Silurian mainly developed transgressive and highstand systems tracts on the whole, while the lowstand systems tract only developed partly below the slope break. The palaeogeomorphology controlled the elastic source supply and deposit distribution. Braided delta system and tidal flat-estuary system were deposited. The duration of uplifting of the Tazhong paleo- uplift was longer than that of the Tabei paleo-uplift, and deposition was later. This led to the lower and middle members of the Kepingtage Formation missing in that area. As a large-scale transgression occurred during the deposition period of the upper member of the Kepingtage Formation, sediment from the west of the basin was transported and deposited by tides and waves, forming tidal-marine debris systems above the uplift. Proximal alluvial fan and fan delta coarse elastic deposits developed in proximal uplift zone in the east and southeast of the basin, and braided delta put forward to the transitional zone between the edge of uplift and the sea. Large-scale tidal channel, sub-distributary channel and mouth bar of the delta front can form favorable reservoirs, and they are primary targets for oil and gas exploration. This research on sequence-depositional systems development and distribution controlled by palaeogeomorphology is significant in guiding the prediction of reservoir sandstones.

Assessment of widely used methods to derive depositional ages from detrital zircon populations

The calculation of a maximum depositional age(MDA)from a detrital zircon sample can provide insight into a variety of geological problems.However,the impact of sample size and calculation method on the accuracy of a resulting MDA has not been evaluated.We use large populations of synthetic zircon dates(N≈25,000)to analyze the impact of varying sample size(n),measurement uncertainty,and the abundance of neardepositional-age zircons on the accuracy and uncertainty of 9 commonly used MDA calculation methods.Furthermore,a new method,the youngest statistical population is tested.For each method,500 samples of n synthetic dates were drawn from the parent population and MDAs were calculated.The mean and standard deviation of each method ove r the 500 trials at each n-value(50-1000,in increments of 50)were compa red to the known depositional age of the synthetic population and used to compare the methods quantitatively in two simulation scenarios.The first simulation scenario varied the proportion of near-depositional-age grains in the synthetic population.The second scenario varied the uncertainty of the dates used to calculate the MDAs.Increasing sample size initially decreased the mean residual error and standard deviation calculated by each method.At higher n-values(>~300 grains),calculated MDAs changed more slowly and the mean resid ual error increased or decreased depending on the method used.Increasing the p roportion of near-depositional-age grains and lowering measurement uncertainty decreased the number of measurements required for the calculated MDAs to stabilize and decreased the standard deviation in calculated MDAs of the 500 samples.Results of the two simulation scenarios show that the most successful way to increase the accuracy of a calculated M DA is by acquiring a large number of low-uncertainty measurements(300300)approach is used if the calculation of accurate MDAs are key to research goals.Other acquisition method s,such as high-to moderate-precision measurement methods(e.g.,1%-5%,2σ)acquiring low-to moderate-n datasets(50300).Additionally,they are most susceptible to producing erroneous MDAs due to contamination in the field or laboratory,or through disturbances of the youngest zircon’s U-Pb systematics(e.g.,lead loss).More conservative methods that still produce accurate MDAs and are less susceptible to contamination or lead loss include:youngest grain cluster at 1σunce rtainty(YGC 1σ),youngest grain clusterat 2σuncertainty(YGC 2σ),and youngest statistical population(YSP).The ages calculated by these methods may be more useful and appealing when fitting calculated MDAs in to pre-existing chronostratigraphic frameworks,as they are less likely to be younger than the true depositional age.From the results of our numerical models we illustrate what geologic processes(i.e.,tectonic or sedimentary)can be resolved using MDAs derived from strata of different ages.

Sedimentary facies and depositional model of shallow water delta dominated by fluvial for Chang 8 oil-bearing group of Yanchang Formation in southwestern Ordos Basin,China

A systematic analysis of southwestern Ordos Basin's sedimentary characteristics,internal architectural element association styles and depositional model was illustrated through core statistics,well logging data and outcrop observations in Chang 8 oil-bearing group.This analysis indicates that shallow water delta sediments dominated by a fluvial system is the primary sedimentary system of the Chang 8 oil-bearing group of the Yanchang Formation in southwestern Ordos Basin.Four microfacies with fine grain sizes are identified: distributary channels,sheet sandstone,mouth bar and interdistributary fines.According to the sandbody's spatial distribution and internal architecture,two types of sandbody architectural element associations are identified: amalgamated distributary channels and thin-layer lobate sandstone.In this sedimentary system,net-like distributary channels at the delta with a narrow ribbon shape compose the skeleton of the sandbody that extends further into the delta front and shades into contiguous lobate distribution sheet sandstone in the distal delta front.The mouth bar is largely absent in this system.By analyzing the palaeogeomorphology,the palaeostructure background,sedimentary characteristics,sedimentary facies types and spatial distribution of sedimentary facies during the Chang 8 period,a distinctive depositional model of the Chang 8 shallow water fluvial-dominated delta was established,which primarily consists of straight multi-phase amalgamated distributary channels in the delta plain,net-like distributary channels frequently diverting and converging in the proximal delta front,sheet sandstones with dispersing contiguous lobate shapes in the distal delta front,and prodelta or shallow lake mudstones.

Depositional Patterns and Oil／Gas Accumulation Features of Sha-3 Member Turbidites in Dongying Depression, Bohai Bay Basin

Recent exploration results indicate that a significant exploration potential remains in the Dongying Depression of the Bohai Bay Basin and the undiscovered oil and gas are largely reservoired in subtle traps including turbidite litholigcal traps of the Sha-3 Member. In order to effectively guide the exploration program targeting turbidites, this study will focus on the depositional models of the Sha-3 Member turbidites and oil/gas accumulation characteristics in these turbidites. Two corresponding relationships were found. One is that the East African Rift Valley provides a modern analog for the depositional systems in the Dongying Depression. The other is that the depositional models of line-sourced slope aprons, single point-source submarine fan and multiple source ramp turbidite, established for deep-sea turbidites, can be applied to interpret the depositional features of the turbidite fans of three different origins: slope turbidite aprons, lake floor turbidite fans and delta-fed turbidite fans in the Sha-3 Member. Updip sealing integrity is the key factor determining whether oil/gas accumulates or not in the slope aprons and lake floor fans. The factors controlling oil/gas migration and accumulation in the delta-fed turbidite fans are not very clear. Multiple factors rather than a single factor probably played significant roles in these processes.

Geochronology and Geochemistry of the Radiolarian Cherts of the Mada'er Area,Southwestern Tianshan:Implications for Depositional Environment

In the southwestern Tianshan,the geologic ages of many strata and their depositional environments are still poorly constrained because of complex structures.The Mada＇er area is located in the Kuokesaleling belt,Southwestern Tianshan.The cherts from the former Wupata＇erkan Group contain abundant radiolarian fossils,including 10 species which are identified as late Devonian to early Carboniferous in age.Eleven chert samples have SiO_2 contents ranging from 88.80 wt%to 93.28 wt%, and 2.02 wt%to 3.72 wt%for Al_2O_3.The SiO_2/Al_2O_3 ratios of all samples vary from 23.84 to 46.11, much lower than those of the pure cherts（80-1400）.These values suggest that the cherts contain high ratios of terrigenous materials.The Al_2O_3/（Al_2O_3＋Fe_2O_3）ratios vary between 0.64 and 0.77,whereas V and Cu concentrations range from 10.92 ppm to 26.7 ppm and from 2.15 ppm to 34.1 ppm respectively. The Ti/V ratios vary from 25.53 to 44.93.The total REE concentrations of the cherts are between 30.78 ppm and 59.26 ppm,averaging 45.46 ppm.The（La/Ce）_N ratios range from 0.81 to 1.12,and 0.88-1.33 for（La/Yb）_N,averaging 1.09,which suggests a continental margin environment.Consequently,it is inferred that the cherts formed in a residual sea environment during the late Devonian to early Carboniferous time,which suggests that the collision between the Karakum-Tarim and Kazakhstan-Junggar plates did not occur at the time.In addition,the regional geological information indicates that the study area experienced a post-collision stage during the early Permian,and thus it is likely that the collision between the two plates took place in the late Carboniferous.

Depositional architecture of the late Ordovician drowned carbonate platform margin and its responses to sea-level fluctuation in the northern slope of the Tazhong region, Tarim Basin

The Tazhong Uplift of the late Ordovician is a drowned rimmed carbonate platform. The carbonate rock of the late Ordovician Lianglitage Formation in the northern slope of the Tazhong region is one of the significant petroliferous intervals. Based on petrofacies, depositional cycles, natural gammaray spectrometry and carbon/oxygen isotope data from the Lianglitage Formation, one 2nd-order, three 3rd-order and several 4th-order sequences have been recognized, and the late Ordovician relative sealevel fluctuation curve has been established. The sequences O3 1-1 and O3 1-2 on the platform are composed of highstand and transgressive systems tracts, but lack the lowstand systems tract. The sequence O3 1-3 is a drowning sequence. The sequence O3 1-1 overlapped the eroded slope and pinched out to the northwest and landward. The highstand systems tract in the sequence O3 1-2 consists of low-angle sigmoid and high-angle shingled progradation configuration. Major sedimentary facies of the Lianglitage Formation include reef and shoal in the platform margin and lagoon, which can be subdivided into coral-sponge-stromatoporoid reef complex, sand shoal, lime mud mound, and intershoal sea. Reefs, sand shoals and their complex are potential reservoir facies. The reefs and sand shoals in the sequence O3 1-1 developed in the upper of its highstand systems tract. In the sequence O3 1-2, the highstand systems tract with an internal prograding configuration is a response to the lateral shifting of the complex of reef and sand shoal. The transgressive systems tract, in particular the sand shoals, developed widely on the slope of the platform margin and interior. The reefs in the sequence O3 1-3 migrated towards high positions and formed retrograding reefs in the western platform and low relief in the platform interior. Basinward lateral migration of the reefs and pure carbonate rock both characterize highstand systems tract and show that the rise of the relative sea-level was very slow. Shingled prograding stacking pattern of the 4th-order sequences and reefs grow horizontally, which represents the late stage of highstand systems tract and implies relative sealevel stillstand. Reefs migrating towards high land and impure carbonate rock both indicate transgressive systems tract and suggest that the relative sea-level rose fast. Erosional truncation and epidiagenetic karstification represent a falling relative sea-level. The relative sea-level fluctuation and antecedent palaeotopography control the development and distribution of reef complexes and unconformity karst zones. Currently, the composite zone of epidiagenetic karstic intervals and high-energy complexes of reefs and sand shoals with prograding configuration is an important oil and gas reservoir in the northern slope of the Tazhong carbonate platform.

Late Carboniferous-Early Permian Sequence Stratigraphy and Depositional Evolution in the Northeast Ordos Basin,North China

Sequence stratigraphical analysis was applied to the Upper Carboniferous-Lower Permian sedimentary succession of the northeastern Ordos Basin, north China based on data acquired from ten entire logging curves and eight outcrops. The facies framework of the lithostratigraphical unit, the Taiyuan Formation comprises seven facies in two facies associations, varying from fluvio-delta to shelf-barrier islands. The facies are presented within a chronostratigraphical framework, linked by systems tract, which in turn are limited by flooding surfaces and sequence boundaries. Six third-order depositional sequences are recognised, bounded by six type 2 unconformities. An upwards-shallowing epicontinental sea sedimentary model is created, which consists of a sandstone, coal seam and carbonate succession.

Diagenesis and Diagenetic Evolution of Deltaic and Neritic Gas-Bearing Sandstones in the Lower Mingyuefeng Formation of Paleogene, Lishui Sag, East China Sea Shelf Basin: Implications for Depositional Environments and Sequence Stratigraphy Controls

Gas-bearing deposits in the Lower Mingyuefeng Formation of Paleogene, Lishui Sag, East China Sea Shelf Basin consist of shoreface sandstones of the highstand systems tract（HST） and transgressive systems tract（TST）, and deltaic sandstones of the lowstand systems tract（LST） and falling stage systems tract（FSST）.Detailed petrographic observations suggest that the diagenetic features and related evolution of these deposits cannot be simply characterized and demonstrated in the depth domain.However, the occurrence of diagenetic minerals systematically depends on the studied interval within the HST, TST, LST, and FSST; therefore, diagenesis in this region can be better constrained when studied in the context of the depositional environments and sequence stratigraphic framework.The eogenetic processes in such settings include：（1） microcrystalline siderite precipitated as concretions in almost all environments and systems tracts, which inhibited further mechanical compaction;（2） grain dissolution and kaolinitization occurred in shoreface HST sandstones and deltaic LST and FSST sandstones;（3） glaucony was locally observed, which did not clearly reflect the controls of facies or sequence stratigraphy; and（4） cementation by pyrite aggregates occurred in the shoreface HST sandstones and deltaic LST sandstones.The mesogenetic diagenesis includes：（1） partial conversion of kaolinite into dickite in deltaic LST sandstones, and minor chlorite cementation in deltaic FSST sandstones;（2） transformation of kaolinite into illite and quartz cementation in deltaic LST and FSST sandstones;（3） frequent precipitation of ankerite and ferroan calcite in shoreface TST sandstones and early HST sandstones, forming baffles and barriers for fluid flow, with common calcite in shoreface HST sandstones as a late diagenetic cement; and（4） formation of dawsonite in the deltaic LST and FSST sandstones, which is interpreted to be a product of the invasion of a CO2-rich fluid, and acts as a good indicator of CO2-bearing reservoirs.This study has thus constructed a reliable conceptual model to describe the spatial and temporal distribution of diagenetic alterations.The results may provide an entirely new conceptual framework and methodology for successful gas exploration in the continental margins of offshore China, thus allowing us to predict and unravel the distribution and quality evolution of clastic reservoirs at a more detailed and reliable scale.

Depositional Age, Provenance Characteristics and Tectonic Setting of the Ailaoshan Group in the Southwestern South China Block

The depositional and metamorphic ages and provenances of the Ailaoshan(ALS) Group in the Ailaoshan-Red River(ALS-RR) shear zone, southwestern South China Block(SCB), were investigated to constrain the tectonic history of the southwestern SCB. In this study, we use petrology, geochemical analysis, zircon cathodoluminescence imaging and UPb geochronology to analyse samples of quartzite, garnet-bearing two-mica schist and metapelite. The age spectra of detrital zircon grains from these metasediments show two dominant age peaks at 550–424 Ma and 876–730 Ma and two subordinate peaks at 970–955 Ma and ~2450 Ma. The youngest peak, corresponding to the early Palaeozoic, accounts for more than 20% of the total dates and constrains the deposition of the ALS Group to the Palaeozoic rather than the Palaeoproterozoic as traditionally thought. Moreover, two peaks of metamorphic ages corresponding to the Permo-Triassic and Cenozoic were also identified, and these ages document the tectonothermal events associated with the Indosinian collision between the Indochina Block and the SCB and the Himalayan collision between the Indian and Asian plates. Geochemical data suggest that the provenances of the ALS Group were dominated by continental arc and recycled metasedimentary rocks. The comparison of probability density distribution plots of the detrital zircon U-Pb age data indicates that the Neoproterozoic detritus in the ALS Group was probably derived from the arc-related Neoproterozoic intrusive bodies in the northwestern and southwestern SCB. Furthermore, the early Palaeozoic detritus might have been sourced from eroded early Palaeozoic strata and magmatic plutons in Cathaysia and volcanic rocks in the western Indochina Block.

Depositional environment in the southern Ulleung Basin,East Sea(Sea of Japan),during the last 48000 years

The present study is based on the sedimentological data from a piston core KCES1 off the southern Ulleung Basin margin,the East Sea（Sea of Japan）.The data include sediment color（L^＊）,X-ray radiographs,grain size distribution and AMS^14C date.Four kinds of sediments（homogeneous,laminated,crudely laminated and hybrid sediments） are identified according to the characters of the sedimentary structures that were considered to reflect changes in bottom-water oxygenation.Alternations of dark laminated/crudely laminated sediments and light homogeneous sediments represent millennial-scale variations that are possibly associated with the high-resolution changes in the East Asian monsoon（EAM）.The relative contributions of the East China Sea Coastal Water（ECSCW） and the Tsushima Warm Current（TWC） were likely the main reasons for the repetition of the anoxic and oxic depositional conditions in the East Sea since the last 48 ka BP.During the interstadial,the strengthen summer EAM was attributed to the expansion of the ECSCW because of more humid climate in central Asia,and then more strongly low-salinity,nutrient-enriched water was introduced into the East Sea.The ventilation of deep water was restricted and therefore the dark laminated layer deposited under the anoxic bottom water condition.During the lowest stand of sea level in the last glacial maximum（LGM）,the isolated East Sea dominated by stratified water masses and the euxinic depositional environment formed.The homogenous sediments have been predominating since 17.5 ka BP indicating that the TWC has intruded into the East Sea gradually with the stepwise rise of sea level and the bottom water oxygen level was high.During the late Younger Dryas（YD） period,the last dark laminated layer deposited because the ventilation of bottom water was restricted by stronger summer EAM.The TWC strengthened and the bottom water became oxic again from 10.5 ka BP.

Depositional System of the Carboniferous Huanglong Formation,Eastern Sichuan Basin:Constraints from Sedimentology and Geochemistry

Using analyses of the lithology,sequences,paleoenvironment,and tectonic setting,the depositional system of the Carboniferous Huanglong Formation in the eastern Sichuan Basin was identified.The lithological characteristics of the Lower Member,Middle Member,and Upper Member were analyzed and classified.Before the use of carbon,oxygen,and strontium isotopes in the analysis,all of the geochemical data were tested for validity.On the basis of the Z values obtained from carbon and oxygen isotopes,the paleoenvironments of the three members were elucidated.Lower Member was dominantly an enclosed marine environment with intense evaporation and little freshwater input into the sea.Middle Member developed in a semi-enclosed to normal marine environment with many rivers.Upper Member was formed in a normal marine environment.The east Sichuan Basin was enclosed by paleouplifts before the deposition of the Huanglong Formation,forming a relatively enclosed depositional setting.Paleogullies developed in the Silurian strata that underlie the Carboniferous rocks;these paleogullies can be identified.On the basis of a comprehensive analysis,we propose that the Huanglong Formation developed in a platform system.Four microfacies were identified：supratidal flat,dolostone flat,grain shoal,and shelf microfacies.The high-permeability and high-porosity characteristics of the grain shoal microfacies are favorable for hydrocarbon accumulation,while the supratidal flat and shelf microfacies developed very few high-quality reservoirs.The paleogullies,in which increased amounts of grain shoal microfacies developed,controlled the distribution of high-quality reservoirs.

Maximum depositional age estimation revisited

In a recent review published in this journal,Coutts et al.(2019)compared nine different ways to estimate the maximum depositional age(MDA)of siliclastic rocks by means of detrital geochronology.Their results show that among these methods three are positively and six negatively biased.This paper investigates the cause of these biases and proposes a solution to it.A simple toy example shows that it is theoretically impossible for the reviewed methods to find the correct depositional age in even a best case scenario:the MDA estimates drift to ever smaller values with increasing sample size.The issue can be solved using a maximum likelihood model that was originally developed for fission track thermochronology by Galbraith and Laslett(1993).This approach parameterises the MDA estimation problem with a binary mixture of discrete and continuous distributions.The‘Maximum Likelihood Age’(MLA)algorithm converges to a unique MDA value,unlike the ad hoc methods reviewed by Coutts et al.(2019).It successfully recovers the depositional age for the toy example,and produces sensible results for realistic distributions.This is illustrated with an application to a published dataset of 13 sandstone samples that were analysed by both LA-ICPMS and CA-TIMS U–Pb geochronology.The ad hoc algorithms produce unrealistic MDA estimates that are systematically younger for the LA-ICPMS data than for the CA-TIMS data.The MLA algorithm does not suffer from this negative bias.The MLA method is a purely statistical approach to MDA estimation.Like the ad hoc methods,it does not readily accommodate geological complications such as post-depositional Pb-loss,or analytical issues causing erroneously young outliers.The best approach in such complex cases is to re-analyse the youngest grains using more accurate dating techniques.The results of the MLA method are best visualised on radial plots.Both the model and the plots have applications outside detrital geochronology,for example to determine volcanic eruption ages.