Depositional Environment and Origin of Inertinite-rich Coal in the Ordos Basin

Inertinite-rich coal is widely distributed in the Ordos Basin,represented by the No.2 coal seam of the Middle Jurassic Yan'an Formation.This paper combined coal petrology and geochemistry to analyze the origin of inertinite,changes in the coal-forming environment and control characteristics of wildfire.Research has shown that there are two forms of inertinite sources in the study area.Alongside typical fusinization,wildfire events also play a substantial role in inertinite formation.There are significant fluctuations in the coal-forming environment of samples at different depths.Coal samples were formed in dry forest swamp with low water levels and strong oxidation,which have a high inertinite content,and the samples formed in wet forest swamp and limnic showed low inertinite content.Conversely,the inertinite content of different origins does not fully correspond to the depositional environment characterized by dryness and oxidation.Nonpyrogenic inertinites were significantly influenced by climatic conditions,while pyrofusinite was not entirely controlled by climatic conditions but rather directly impacted by wildfire events.The high oxygen level was the main factor causing widespread wildfire events.Overall,the combination of wildfire activity and oxidation generates a high content of inertinite in the Middle Jurassic coal of the Ordos Basin.

Distribution and geochemical significance of alkylbenzenes for crude oil with different depositional environments and thermal maturities

A total of 45 alkylbenzenes were detected and identified in crude oils with different depositional environments and thermal maturities from the Tarim Basin,Beibuwan Basin,and Songliao Basin using comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry(GC×GCTOFMS).By analyzing the distribution characteristics of C0-C5alkylbenzenes,it is found that the content of some alkylbenzenes varies greatly in crude oils.Based on the distribution characteristics of 1,2,4,5-tetramethylbenzene(Te MB)and 1,2,3,4-Te MB,the ratio of 1,2,4,5-Te MB to 1,2,3,4-Te MB is proposed to indicate the organic matter origin and depositional environment of ancient sediments.Oil samples originated mainly from lower hydrobiont,algae,bacteria and source rocks deposited under reducing/anoxic conditions have low 1,2,4,5-/1,2,3,4-Te MB values(less than 0.6),while oil samples originated mainly from terrestrial higher plants and source rocks deposited under oxic/sub-oxic conditions have higher 1,2,4,5-/1,2,3,4-Te MB values(greater than 1.0).The significant difference of 1,2,4,5-/1,2,3,4-Te MB values is controlled by 1,2,4,5-Te MB content.1,2,4,5-Te MB content in oils derived from source rocks deposited in oxidized sedimentary environment(greater than 1.0 mg/g whole oil)is higher than that in oils from source rocks deposited in reduced sedimentary environment(less than 1.0 mg/g whole oil).1,2,4,5-/1,2,3,4-Te MB ratio might not or slightly be affected by evaporative fractionation,biodegradation and thermal maturity.1,2,4,5-/1,2,3,4-Te MB ratio and 1,2,4,5-Te MB content can be used as supplementary parameter for the identification of sedimentary environment and organic matter input.It should be noted that compared to the identification of organic matter sources,the 1,2,4,5-/1,2,3,4-Te MB parameter is more effective in identifying sedimentary environments.

Depositional process of hyperpycnal flow deposits:A case study on Lower Cretaceous Sangyuan outcrop in the Luanping Basin,Northeast China

Sedimentary process research is of great significance for understanding the distribution and characteristics of sediments.Through the detailed observation and measurement of the Sangyuan outcrop in Luanping Basin,this paper studies the depositional process of the hyperpycnal flow deposits,and divides their depositional process into three phases,namely,acceleration,erosion and deceleration.In the acceleration phase,hyperpycnal flow begins to enter the basin nearby,and then speeds up gradually.Deposits developed in the acceleration phase are reverse.In addition,the original deposits become unstable and are taken away by hyperpycnal flows under the eroding force.As a result,there are a lot of mixture of red mud pebbles outside the basin and gray mud pebbles within the basin.In the erosion phase,the reverse deposits are eroded and become thinner or even disappear.Therefore,no reverse grading characteristic is found in the proximal major channel that is closer to the source,but it is still preserved in the middle branch channel that is far from the source.After entering the deceleration phase,normally grading deposits appear and cover previous deposits.The final deposits in the basin are special.Some are reverse,and others are normal.They are superimposed with each other under the action of hyperpycnal flow.The analysis of the Sangyuan outcrop demonstrates the sedimentary process and distribution of hyperpycnites,and reasonably explain the sedimentary characteristics of hyperpycnites.It is helpful to the prediction of oil and gas exploration targets in gravity flow deposits.

Geochemistry and depositional environment of fuchsite quartzites from Sargur Group,western Dharwar Craton,India

Meso-Neoarchean fuchsite quartzites are present in different stratigraphic positions of Dharwar Craton including the oldest(~3.3 Ga)Sargur Group of western Dharwar Craton.The present study deals with the petro-graphic and geochemical characteristics of the fuchsite quartzites from the Ghattihosahalli belt to evaluate their genesis,depositional setting and the enigma involved in the ancient sedimentation history.Their major mineral assemblages include quartz,fuchsite,and feldspars along with accessory kyanite and rutile.The geochemical com-positions are characterized by high SiO_(2),Al_(2)O_(3),low MgO,CaO,strongly enriched Cr(1326–6899 ppm),Ba(1165–3653 ppm),Sr(46–210 ppm),V(107–868 ppm)and Zn(11–158 ppm)contents compared to the upper continental crust(UCC).The UCC normalized rare earth element(REE)patterns are characterized by depleted light REE[(La/Sm)UCC=0.33–0.95]compared to heavy REE[(Gd/Yb)_(UCC)=0.42–1.65]with conspicuous positive Eu-anomalies(Eu/Eu^(*)=1.35–18.27)characteristic of hydrothermal solutions evidenced through the interlayered barites.The overall major and trace element systematics reflect a combined mafic-felsic provenance and suggest their deposition at a passive continental margin environ-ment.The comprehensivefield,petrographic,and geo-chemical studies indicate that these quartzites are infiltrated by Cr-richfluids released during high-grade metamorphism of associated ultramafic rocks.The Sargur and the subse-quent Dharwar orogeny amalgamated diverse lithounits from different tectonic settings,possibly leading to the release of Cr-richfluids and the formation of fuchsite quartzite during or after the orogeny.Thesefindings sug-gest a pre-existing stable crust prior to the Sargur Group and the link between orogenic events and various mineral deposits in the Dharwar Craton.

Depositional model of the Member Deng-2 marginal microbial mound-bank complex of the Dengying Formation in the southwestern Sichuan Basin, SW China: Implications for the Ediacaran microbial mound construction and hydrocarbon exploration

Recent advances in hydrocarbon exploration have been made in the Member Deng-2 marginal microbial mound-bank complex reservoirs of the Dengying Formation in the western Sichuan Basin, SW China,where the depositional process is regarded confusing. The microfacies, construction types, and depositional model of the Member Deng-2 marginal microbial mound-bank complex have been investigated using unmanned aerial vehicle photography, outcrop section investigation, thin section identification,and seismic reflections in the southwestern Sichuan Basin. The microbialite lithologic textures in this region include thrombolite, dendrolite, stromatolite, fenestral stromatolite, spongiostromata stone,oncolite, aggregated grainstone, and botryoidal grapestone. Based on the comprehensive analysis of“depositional fabrics-lithology-microfacies”, an association between a fore mound, mound framework,and back mound subfacies has been proposed based on water depth, current direction, energy level and lithologic assemblages. The microfacies of the mound base, mound core, mound flank, mound cap, and mound flat could be recognized among the mound framework subfacies. Two construction types of marginal microbial mound-bank complex have been determined based on deposition location, mound scale, migration direction, and sedimentary facies association. Type Jinkouhe microbial mound constructions(TJMMCs) develop along the windward margin owing to their proximity to the seaward subfacies fore mound, with a northeastwardly migrated microbial mound on top of the mud mound,exhibiting the characteristics of large-sized mounds and small-sized banks in the surrounding area. Type E'bian microbial mound constructions(TEMMCs) primarily occur on the leeward margin, resulting from the presence of onshore back mound subfacies, with the smaller southwestward migrated microbial mounds existing on a thicker microbial flat. The platform margin microbial mound depositional model can be correlated with certain lateral comparison profile and seismic reflection structures in the 2D seismic section, which can provide references for future worldwide exploration. Microbial mounds with larger buildups and thicker vertical reservoirs are typically targeted on the windward margin, while small-sized microbial mounds and flats with better lateral connections are typically focused on the leeward margin.

Fluid inclusion and H-O-S-Pb isotope systematics of the Chayong Cu-polymetallic deposit,Sanjiang Metallogenic Belt,Qinghai Province,China

The Chayong Cu-polymetallic deposit is a recently discovered Cu-polymetallic deposit hosted in the Sanjiang Metallogenic Belt within the Tibetan Plateau of China to the northeast of the North Qiangtang terrane.The ore body occurs in siltstone and is controlled by a northwest-trending fault structure.According to the associations,assemblages,and cutting relationships between ore veins,the hydrothermal mineralization period can be divided into three mineralization stages:(1)a molybdenite mineralization stage,(2)a Cu-polymetallic sulfide stage,and(3)a quartzcarbonate stage.Two types of fluid inclusions(FIs),namely,liquid and vapor-rich inclusions,are present in quartz as so ciated with sulfide minerals.Early-stage FIs are both iquid and vapor-rich,homogenized at temperatures ranging from 364.1 to 384.2℃,and have salinities ranging from0.70%to 9.60%NaCl equivalent(eqv).The middle-stage FIs are also both liquid-and vapor-rich,homogenized at temperatures ranging from 272.4 to 355.6℃,and have salinities ranging from 0.53%-17.10%NaCl eqv.The late-stage FIs are liquid,homogenized at temperatures ranging from 209.4to 255.3℃,and have salinities ranging from 0.35%-6.87%NaCl eqv.The samples from the deposit haveδ^(34)S values of-21.8‰to-19.2‰and-5.5‰to-6.0‰,suggesting that sulfur was derived from the host sediments and magmatic fluids,respectively.The metallic minerals within the deposit have^(206)Pb/^(204)Pb,^(207)Pb/^(204)Pb,and^(208)Pb/^(204)Pb values of 18.439-18.458,15.656-15.679,and 38.772-38.863,respectively,suggesting that the metals were derived from the upper crust and orogenic belts.The samples from the deposit haveδ^(18)O_(W)values of 2.99‰-7.99‰andδD_(W) values ranging from-84.4‰to-73.9‰,indicating that the pre-forming fluids were magmatic and mixed with minor amounts of meteoric water.The ore-forming fluid of the Chayong copper polymetallic deposit was a high-temperature,medium-to low-salinity H_(2)O-NaCl-CH_(4)-N_(2)±CO_(2)fluid system.The early high-temperature magmatic fluid,due to boiling,decreased in temperature,and via the mixing of meteoric water,gradually evolved towards the later-stage medium-to low-temperature and low-salinity fluid,causing nolybdenite mineralization and forming copper polymetallic sulfide veins and quartz carbonate veins.

Continuous Lithium-Ion Extraction From Seawater and Mine Water With a Fuel Cell System and Ceramic Membranes

The demand for electronic devices that utilize lithium is steadily increasing in this rapidly advancing technological world.Obtaining high-purity lithium in an environmentally friendly way is challenging by using commercialized methods.Herein,we propose the first fuel cell system for continuous lithium-ion extraction using a lithium superionic conductor membrane and advanced electrode.The fuel cell system for extracting lithium-ion has demonstrated a twofold increase in the selectivity of Li^(+)/Na^(+)while producing electricity.Our data show that the fuel cell with a titania-coated electrode achieves 95%lithium-ion purity while generating 10.23 Wh of energy per gram of lithium.Our investigation revealed that using atomic layer deposition improved the electrode's uniformity,stability,and electrocatalytic activity.After 2000 cycles determined by cyclic voltammetry,the electrode preserved its stability.

Palaeogeomorphology and its control on the development of sequence stratigraphy and depositional systems of the Early Silurian in the Tarim Basin

The Silurian in the Tarim Basin was deposited on the basement deformed by the Caledonian tectonic movements at the end of the Late Ordovician. The development and distribution of sedimentary sequences of the Early Silurian have been clearly controlled by the palaeogeomorphology of the Late Ordovician. Based on unconformity characteristics and distribution of erosion, several zones can be differentiated including a high uplifted erosion zone, a transitional slope zone and a depression zone. The central and west Tabei Uplift zones show high angular unconformity and intense erosion. The Tarim Basin in the late Ordovician shows characteristics of higher in the west, lower in the east while higher in the south, lower in the north. The Early Silurian mainly developed transgressive and highstand systems tracts on the whole, while the lowstand systems tract only developed partly below the slope break. The palaeogeomorphology controlled the elastic source supply and deposit distribution. Braided delta system and tidal flat-estuary system were deposited. The duration of uplifting of the Tazhong paleo- uplift was longer than that of the Tabei paleo-uplift, and deposition was later. This led to the lower and middle members of the Kepingtage Formation missing in that area. As a large-scale transgression occurred during the deposition period of the upper member of the Kepingtage Formation, sediment from the west of the basin was transported and deposited by tides and waves, forming tidal-marine debris systems above the uplift. Proximal alluvial fan and fan delta coarse elastic deposits developed in proximal uplift zone in the east and southeast of the basin, and braided delta put forward to the transitional zone between the edge of uplift and the sea. Large-scale tidal channel, sub-distributary channel and mouth bar of the delta front can form favorable reservoirs, and they are primary targets for oil and gas exploration. This research on sequence-depositional systems development and distribution controlled by palaeogeomorphology is significant in guiding the prediction of reservoir sandstones.

Sedimentary system characteristics and depositional filling model of Upper Permian——Lower Triassic in South Yellow Sea Basin

In the South Yellow Sea Basin,Mesozoic–Paleozoic marine strata are generally well developed with large thickness,and no substantial breakthroughs have been made in hydrocarbon exploration.Through research,it is believed that the Upper Permian–Lower Triassic can be regarded as a long-term base-level cycle.Based on drilling data,characteristics of the lithology–electric property combination cyclicity,and the special lithology,the long-term base-level cycle was divided into five medium-term base-level cycles(MC1–MC5).On this basis,the Permian–Triassic sedimentary systems and their filling model were analyzed in accordance with the change of base-level cycle and transition of sedimentary environment,as well as characteristics of the drilling sedimentary facies and seismic facies.The results show that there were six sedimentary systems(fluvial,delta,tidal flat,open platform,restricted platform,and continental shelf)developed in the Upper Permian–Lower Triassic,the sedimentary systems were distributed such that the water was deep in the northwest and shallow in the southeast,and there were two base-level cycle filling models(a relatively stable tidal flat facies and a rapidly transgressive continental shelf facies to stable platform facies)developed in the Upper Permian–Lower Triassic.These models can provide a basis for evaluation of the Mesozoic–Paleozoic hydrocarbon geology in the South Yellow Sea Basin.

Depositional System of the Carboniferous Huanglong Formation,Eastern Sichuan Basin:Constraints from Sedimentology and Geochemistry

Using analyses of the lithology,sequences,paleoenvironment,and tectonic setting,the depositional system of the Carboniferous Huanglong Formation in the eastern Sichuan Basin was identified.The lithological characteristics of the Lower Member,Middle Member,and Upper Member were analyzed and classified.Before the use of carbon,oxygen,and strontium isotopes in the analysis,all of the geochemical data were tested for validity.On the basis of the Z values obtained from carbon and oxygen isotopes,the paleoenvironments of the three members were elucidated.Lower Member was dominantly an enclosed marine environment with intense evaporation and little freshwater input into the sea.Middle Member developed in a semi-enclosed to normal marine environment with many rivers.Upper Member was formed in a normal marine environment.The east Sichuan Basin was enclosed by paleouplifts before the deposition of the Huanglong Formation,forming a relatively enclosed depositional setting.Paleogullies developed in the Silurian strata that underlie the Carboniferous rocks;these paleogullies can be identified.On the basis of a comprehensive analysis,we propose that the Huanglong Formation developed in a platform system.Four microfacies were identified：supratidal flat,dolostone flat,grain shoal,and shelf microfacies.The high-permeability and high-porosity characteristics of the grain shoal microfacies are favorable for hydrocarbon accumulation,while the supratidal flat and shelf microfacies developed very few high-quality reservoirs.The paleogullies,in which increased amounts of grain shoal microfacies developed,controlled the distribution of high-quality reservoirs.

Sequence stratigraphy and depositional systems in the Paleogene,Liaodong Bay

Based on drilling and seismic data, the Paleogene developed in Liaodong Bay can be divided into five third-order sequences bounded by six sequence boundaries. Through analyzing depositional systems in each sequence in detail, the Es-3 time was defined as fast rifting. During the deposition of the Es-3 member, the lake basin was continuous along the N-S direction but compartmentalized along the E-W direction by several N-S trending faults. Deposition was dominated by steep slope fans and fan deltas. The time of Es-2 and Es-1 was stable settling. The lake basin expanded substantially. The fan delta system and braided fluvial system were developed. Carbonate and clastic deposits were formed on the Liaoxi （west Liaohe） Rise. The time of Ed-3 time was again fast rifting. During this time, shale was deposited. In the time of Es-2, tectonic movement weakened. The basin was higher in the west and north, and lower in the east and south. A series of delta depositional systems were developed and smallscale slumping turbidite fans were present in semi-deep lake to deep lake. In the time of Ed-1, tectonic movement stopped. Flood plain deposition occurred. Finally the paper presents the characteristics of evolution and distribution of depositional systems both vertically and horizontally.

Character of Terrestrial Sequence Stratigraphy and Depositional System in Incised Valley, Outcrop Area of Karamay Oilfield, Junggar Basin, China

In the Karamay oilfield located on the northwestern margin of Junggar basin, Xinjiang, China, a large area of the Karamay Formation is exposed at outcrop in the northeast of the oilfield, a consequence of thrusting. The Middle Triassic Karamay Formation in the outcrop area is a type of terrestrial third-order sequence, bounded by two easily recognizable sequence boundaries: a regional surface of angular unconformity (SB1) at the base and a regional unconformity (SB2) at the top. Within the Karamay Formation, two lacustrine expansion events can be recognized and be used to identify both the initial and the maximum lacustrine flooding surfaces. The two lacustrine flooding surfaces serve as references for the classification of this third-order sequence-Karamay Formation into the following three sedimentary successions: a lower lowstand systems tract (LST), a middle lacustrine-expanding systems tract (EST), and an upper highstand systems tract (HST). Different systems tracts are composed of different depositional system assemblages. In this paper, each depositional system is described in detail. The lowstand systems tract in the study area is characterized by incised valleys. At the base and on the margin of the incised valleys occur alluvial fan depositional systems, and in the upper and distal parts of the alluvial fan, low-sinuosity river depositional systems. The lacustrine-expanding systems tract consists of a lacustrine depositional system and a lacustrine delta depositional system, overlying the lower incised valley fills. The highstand systems tract is filled by a widespread lacustrine braided delta depositional system. The analysis of sequence stratigraphy in this paper serves the description of the spatial distribution of the reservoir. The depositional system analysis serves the description of the reservoir types. Field investigations of oil sandstone and oil seepage show that the Karamay Formation is composed of several types of reservoirs. However, two types of high quality reservoir occur both in the upper interval of the lowstand systems tract and in the lacustrine-expanding systems tract: gravelly low-sinuosity channel in the distal fans and sandy-gravelly distributary channel in the lacustrine delta plain.

Depositional Environment and Lithofacies Analyses of Eocene Lacustrine Shale in the Bohai Bay Basin:Insights from Mineralogy and Elemental Geochemistry

The effect of various depositional parameters including paleoclimate,paleosalinity and provenance,on the depositional mechanism of lacustrine shale is very important in reconstructing the depositional environment.The classification of shale lithofacies and the interpretation of shale depositional environment are key features used in shale oil and gas exploration and development activity.The lower 3rd member of the Eocene Shahejie Formation(Es_(3)^(x)shale)was selected for this study,as one of the main prospective intervals for shale oil exploration and development in the intracratonic Bohai Bay Basin.Mineralogically,it is composed of quartz(avg.9.6%),calcite(avg.58.5%),dolomite(avg.7%),pyrite(avg.3.3%)and clay minerals(avg.20%).An advanced methodology(thin-section petrography,total organic carbon and total organic sulfur contents analysis,X-ray diffraction(XRD),X-ray fluorescence(XRF),field-emission scanning electron microscopy(FE-SEM))was adopted to establish shale lithofacies and to interpret the depositional environment in the lacustrine basin.Six different types of lithofacies were recognized,based on mineral composition,total organic carbon(TOC)content and sedimentary structures.Various inorganic geochemical proxies(Rb/Sr,Ca/(Ca+Fe),Ti/Al,Al/Ca,Al/Ti,Zr/Rb)have been used to interpret and screen variations in depositional environmental parameters during the deposition of the Es_(3)^(x)shale.The experimental results indicate that the environment during the deposition of the Es_(3)^(x)shale was warm and humid with heightened salinities,moderate to limited detrital input,higher paleohydrodynamic settings and strong oxygen deficient(reducing)conditions.A comprehensive depositional model of the lacustrine shale was developed.The interpretations deduced from this research work are expected to not only expand the knowledge of shale lithofacies classification for lacustrine fine-grained rocks,but can also offer a theoretical foundation for lacustrine shale oil exploration and development.

Depositional System and Seismic Response of Subsurface Brines Reservoirs in Western Qaidam Basin,China

It is a major continuous depocenter in Dalangtan area,western Qaidam basin since Early Cenozoic,which is most important Neogene salt deposits center in Qaidam basin.The Miocene Saline lake was developed firstly in

Incorporation of perigastric tumor deposits into the TNM staging system for primary gastric cancer

BACKGROUND The current prognostic significance of perigastric tumor deposits(TDs)in gastric cancer(GC)remains unclear.AIM To assess the prognostic value of perigastric TDs and put forward a new TNM staging framework involving TDs for primary GC.METHODS This study retrospectively analyzed the pathological data of 6672 patients with GC who underwent gastrectomy or surgery for GC with other diseases from January 1,2012 to December 31,2017 at the Chinese PLA General Hospital.According to the presence of perigastric TDs or not,the patients were divided into TD-positive and TD-negative groups by using the method of propensity score matching.The differences between TD-positive and TD-negative patients were analyzed using binary logistic regression modeling.The Kaplan-Meier method was used to plot survival curves.Multivariate Cox regression modeling and the log-rank test were used to analyze the data.RESULTS Perigastric TDs were found to be positive in 339(5.09%)of the 6672 patients with GC,among whom 237 were men(69.91%)and 102 were women(30.09%)(2.32:1).The median age was 59 years(range,27 to 78 years).Univariate and multivariate survival analyses indicated that TD-positive GC patients had a poorer prognosis than TD-negative patients(P<0.05).The 1-,3-,and 5-year overall survival rates of GC patients with TDs were 68.3%,19.6%,and 11.2%,respectively,and these were significantly poorer than those without TDs of the same stages.There was significant variation in survival according to TD locations among the GC patients(P<0.05).A new TNM staging framework for GC was formulated according to TD location.When TDs appear in the gastric body,the original stages T1,T2,and T3 are classified as T4a with the new framework,and the original stages T4a and T4b both are classified as T4b.When TDs appear in the lesser curvature,the previous stages N0,N1,N2,and N3 now both are classified as N3.When TDs appear in the greater curvature or the distant tissue,the patient should be categorized as having M1.With the new GC staging scheme including TDs,the survival curves of patients in the lower grade TNM stage with TDs were closer to those of patients in the higher grade TNM stage without TDs.CONCLUSION TDs are a poor prognostic factor for patients with primary GC.The location of TDs is associated with the prognosis of patients with primary GC.Accordingly,we developed a new TNM staging framework involving TDs that is more appropriate for patients with primary GC.

On Lacustrine Depositional Systems and Coal Accumulation in Baise Basin

Baise basin is a semi-graben type , pan-shaped faulted basin of Early Tertiary , in which carbonate lacustrine deposits and elastic lacustrine deposits developed . The assemblages of Gilbert-type delta-lakes ,littoral ,shallow and deep water fades are recognized . Based on grain size , the clastic lacustrine deposit systems can be grouped in three kinds of depositional sequences of progressive deposition : (1)from coarse to fine , (2)from fine to coarse and (3) from fine to coarse and then to fine agan . This was controlled mainly by hydrodynamic factor of lake bottom type .Lake shore was an important place for coal accumulation and peatmoor development . It had long time for coal accumulation and there was a very little amount of minerals into the basin ,and the thick coal layer and high quality coal developed m the zone where initial lake bottom was plan-like and the surface stream flow was weak .Peat accumulation advanced from the margin to the center of basin .Carbonate lakes contained much water ,very high preponderant contenis of coagel ,low inert contents and no fusinite in the coal .

Characteristics of deep water depositional system in Campos basin, Brazil

To make clear about the sedimentary facies types and distribution of deep water sandstone reservoirs in Campos basin of Brazil,this paper researches the characteristics of deep-water sedimentary system in Campos basin through the comprehensive analysis of drilling,logging and seismic data.There are 3 subfacies and 7 microfacies in the study area.There are 3 channels from south to north in Upper Cretaceous Maastrichtian,and the sedimentary incised valley and compound channels developed in micro-salt basin are the main deep water depositional types.The Paleocene to Eocene dominated by sedimentary incised valley and eroded compound channel deposits,also include 3 channel systems.From Oligocene to Miocene,the main deposition type is lobe,which is mainly distributed in central-north of the basin.Corresponding to deep water depositional stages,3 kinds of depositional models are found.From Turonian to Maastrichtian of Upper Cretaceous,with tectonic uplift,strong source material supply,and the negative topography produced by salt rock movement providing favorable accommodation for sand deposition,the depositional model was terrigenous direct feed mechanism with sedimentary incised valley and compound channels in micro salt basin.From Paleocene to Eocene,as the amplitude of tectonic uplift reached the maximum and the accompanied erosion peaked,accommodation space offered by micro salt basin was leveled up;the depositional model was terrigenous direct feed mechanism with sedimentary valley and incised compound channels.From Oligocene to Miocene,because of sable tectonics,sea level fluctuation is the main controlling factor for deep water deposition,so the depositional model was wide shelf indirect feed mechanism with bypass incised valley and lobe.The analysis of the characteristics and controlling factors of the 3 types deep-water sedimentary systems during 3 different stages in Campos Basin can provide valuable reference for the oil exploration in deep-water deposits in the Campos Basin and across the world.

Textural and compositional variation of mica from the Dexing porphyry Cu deposit:constraints on the behavior of halogens in porphyry systems

The Dexing porphyry deposit is the largest porphyry Cu–Mo–Au deposit in South China.Biotite composition can record the physicochemical conditions and evolution history of magmatic-hydrothermal system.Biotite from the Dexing porphyry deposit could be divided to three types:primary magmatic biotite(Bi-M),hydrothermal altered magmatic biotite(Bi-A)and hydrothermal biotite(Bi-H).The temperature of Bi-M and Bi-H range from 719 to 767℃ and 690 to 727℃,respectively.Both magmatic and hydrothermal biotite have high Fe^(3+)/Fe^(2+)ratios(from 0.18 to 0.24)and XMgvalues(from 0.57 to 0.66),indicating a high oxygen fugacity.BiM has F lower than Bi-A and Bi-H(up to 0.26 wt%),but has Cl(Cl=0.18–0.30 wt%)similar to Bi-A and Bi-H(Cl=0.21–0.35 wt%),suggesting that high Cl/F ratios of early hydrothermal fluid may result from the exsolution from high Cl magma.From potassic alteration zone to phyllic and propylitic alteration zones,Cl decreases with increasing Cu,whereas F increases roughly.Therefore,Cl mostly originate from magma,but enrichment of F possibly results from reaction of fluids and Neoproterozoic strata.Negative correlation between Cl and Cu indicates that Cl might act as an important catalyst during Cu mineralization process.Biotite from Dexing has similar halogen compositions to other porphyry Cu-/Mo deposits in the world.Chlorine contents of hydrothermal fluid may be critical for Cu transportation and enrichment,while consumption of Cl would promote Cu deposition.

Sedimentary Processes and Depositional Characteristics of Coarse-grained Subaqueous Fans along Steep Slopes in a Lacustrine Rift Basin:A Case Study from the Dongying Depression,Bohai Bay Basin,China

Coarse-grained subaqueous fans are vital oil and gas exploration targets in the Bohai Bay basin,China.The insufficient understanding of their sedimentary processes,depositional patterns,and controlling factors restricts efficient exploration and development.Coarse-grained subaqueous fans in the Yong′an area,Dongying Depression,are investigated in this study.These fans include nearshore subaqueous fans,and sublacustrine fans,and their sedimentary processes,depositional patterns and distribution characteristics are mainly controlled by tectonic activity and paleogeomorphology.Nearshore subaqueous fans developed near the boundary fault during the early–middle deposition stage due to strong tectonic activity and large topographic subsidence.Early sublacustrine fans developed at the front of the nearshore subaqueous fans in the area where the topography changed from gentle to steep along the source direction.While the topography was gentle,sublacustrine fans did not develop.During the late weak tectonic activity stage,late sublacustrine fans developed with multiple stages superimposed.Frequent fault activity and related earthquakes steepened the basin margin,and the boundary fault slopes were 25.9°–34°.During the early–middle deposition stage,hyperpycnal flows triggered by outburst floods developed.During the late deposition stage,with weak tectonic activity,seasonal floods triggered hyperpycnal flows,and hybrid event beds developed distally.

Diversity of depositional architecture and sandbody distribution of sublacustrine fans during forced regression: A case study of Paleogene Middle Sha 3 Member in Dongying Sag, Bohai Bay Basin, East China

Currently, the differences in gravity flow deposits within different systems tracts in continental lacustrine basins are not clear. Taking the middle submember of the third member of Paleogene Shahejie Formation(Sha 3 Member) in the Shishen 100 area of the Dongying Sag in the Bohai Bay Basin as an example, the depositional architecture of sublacustrine fans during forced regression and the impact of the fourth-order base-level changes on their growth were investigated using cores, well logs and 3D seismic data. Sublacustrine fans were mainly caused by hyperpycnal flow during the fourth-order base-level rise, while the proportion of slump-induced sublacustrine fans gradually increased during the late fourth-order base-level fall. From rising to falling of the fourth-order base-level, the extension distance of channels inside hyperpycnal-fed sublacustrine fans reduced progressively, resulting in the transformation in their morphology from a significantly channelized fan to a skirt-like fan. Furthermore, the depositional architecture of distributary channel complexes in sublacustrine fans changed from vertical aggradation to lateral migration, and the lateral size of individual channel steadily decreased. The lobe complex's architectural patterns evolved from compensational stacking of lateral migration to aggradational stacking, and the lateral size of individual lobe steadily grew. This study deepens the understanding of depositional features of gravity flow in high-frequency sequence stratigraphy and provides a geological foundation for the fine development of sublacustrine fan reservoirs.