To quantify the seismic effectiveness of the most commonly used fishing line tie up method for securing museum collections and optimize fixed strategies for exhibitions,shaking table tests of the seismic systems used ...To quantify the seismic effectiveness of the most commonly used fishing line tie up method for securing museum collections and optimize fixed strategies for exhibitions,shaking table tests of the seismic systems used for typical museum collection replicas have been carried out.The influence of body shape and fixed measure parameters on the seismic responses of replicas and the interaction behavior between replicas and fixed measures have been explored.Based on the results,seismic effectiveness evaluation indexes of the tie up method are proposed.Reasonable suggestions for fixed strategies are given,which provide a basis for the exhibition of delicate museum collections considering the principle of minimizing seismic responses and intervention.The analysis results show that a larger ratio of height of mass center to bottom diameter led to more intense rocking responses.Increasing the initial pretension of fishing lines was conducive to reducing the seismic responses and stress variation of the lines.Through comprehensive consideration of the interaction forces and effective securement,it is recommended to apply 20%of breaking stress as the initial pretension.For specific museum collections that cannot be effectively protected by the independent tie up method,an optimized strategy of a combination of fishing lines and fasteners is recommended.展开更多
As one of the main load-carrying components of cable-stayed bridges,bridge towers are typically required to remain elastic even when subjected to severe ground motions with a 2%-3%probability of exceedance in 50 years...As one of the main load-carrying components of cable-stayed bridges,bridge towers are typically required to remain elastic even when subjected to severe ground motions with a 2%-3%probability of exceedance in 50 years.To fulfill this special requirement imposed by current seismic design codes,reinforcement ratios in the bridge towers have to be kept significantly higher than if limited ductility behavior of the tower is allowed.In addition,since the foundation capacity is closely related to the moment and shear capacities of the bridge tower,a large increase in bridge construction cost for elastically designed cable-stayed bridge is inevitable.To further investigate the possibility of limited ductility bridge tower design strategies,a new 1/20-scale cable-stayed bridge model with H-shaped bridge towers designed according to strong strut-weak tower column design was tested.The shake table experimental results are compared with a previous strong tower column-weak strut designed full bridge model.A comparison of the results show that ductility design with plastic hinges located on tower columns,i.e.,strong strut-weak tower column design,is another effective seismic design strategy that results in only small residual displacement at the top of the tower column,even under very severe earthquake excitations.展开更多
Physical model test is an effective way to unveil the dynamic response of a slope under seismic condition.The similarity design is the key of physical model test.An isolated similarity design method for shaking table ...Physical model test is an effective way to unveil the dynamic response of a slope under seismic condition.The similarity design is the key of physical model test.An isolated similarity design method for shaking table tests was proposed and verified in this work.In this method,the relevant physical quantities were divided into several subsystems and subcharacteristic equations for each subsystem were then established based on the Buckingham similarity theory.Large-scale shaking table tests on a reinforced slope were adopted herein to illustrate the application of the proposed isolated similarity design method.The similarity system for the studied slope was divided into four parts in the process of similarity design.The geometrical dimension L,densityρand gravity g were selected as fundamental quantities for the similarity design,and four subcharacteristic equations were established for each subsystem.The dynamic responses of the recorded acceleration and axis force show that the seismic waves propagate well in the model slope.The proposed isolated similarity design method solves the conflict between the similarity requirement for all relevant physical quantities and the difficulty of test model fabrication to satisfy all similarity relations.展开更多
Climatic considerations in the architectural design of most contemporary buildings have not been strictly adhered to by building design and construction professionals in the last few decades in the developing world, w...Climatic considerations in the architectural design of most contemporary buildings have not been strictly adhered to by building design and construction professionals in the last few decades in the developing world, with users being denied the inevitable interactions with the natural surroundings offered by climate. The situation leads to utilization of energy-based equipment such as air conditioner that is environmentally unsustainable. The study aimed to evaluate the bioclimatic design features of residential building typologies and to identify features that can enhance the environmental responsiveness of buildings. This study adopted the Mahoney Tables to undertake a climatic analysis to develop appropriate design guidelines for the climate context. The developed design guidelines were then used to evaluate the bio-climatic design features of a sampled number of residential building types. The study revealed that features of the buildings reflect the recommended design guidelines, but to varied extents among the building typologies that were studied. Occupants generally find their spaces unsatisfactory primarily as a result of the experience of hot discomfort. The findings are expected to engender a renewed interest in the design of buildings in response to prevailing climatic conditions to reduce reliance on energy use and to serve as a useful reference for contemporary architectural design practice and education.展开更多
Sleeve pattern design of men’ s tailored - suit is one of the most difficult problems of clothing pattern design. Based on the experimental studies of armhole girth, the difference of armhole width and crown height, ...Sleeve pattern design of men’ s tailored - suit is one of the most difficult problems of clothing pattern design. Based on the experimental studies of armhole girth, the difference of armhole width and crown height, crown angle, under sleeve curve’s diagonal line length, crown ease and its distribution rule, this paper mainly deals with the sleeve pattern design of tailored - suit for Chinese men. The influences of these factors are discussed and furthermore, some qualitative, quantifiable conclusions are drawn to design perfect pattern of men’ s tailored - suit sleeve.展开更多
Applying calculation method in alloy design should be an important tendency due to its characters of inexpensive cost, high efficiency and prediction. DOS calculations of AuSn, AsSn and SbSn Sn- based alloys have ...Applying calculation method in alloy design should be an important tendency due to its characters of inexpensive cost, high efficiency and prediction. DOS calculations of AuSn, AsSn and SbSn Sn- based alloys have been investigated by employing DV - Xa method, in which different cluster models were adopted to calculate electron structure.It is proved that some regulations must be taken into ac- count in order to carry out alloy design calculation successfully,which are described in this paper in detail.展开更多
To meet the development trend of multi-bar warp knit-ting machine towards high-speed,advanced technologyand computer control and the requirements of variousproducts with small quantity,there are many researcheson the ...To meet the development trend of multi-bar warp knit-ting machine towards high-speed,advanced technologyand computer control and the requirements of variousproducts with small quantity,there are many researcheson the computer-aided pattern design of multi-barwarp knitted fabrics.In terms of the special propertiesof the computer-aided pattern design of multi-barwarp knitted fabrics,the Object Oriented Program(OOP)programming-Object Windows class Library(OWL)programming is selected.According to thecharacters of the OWL programming,various functionsare defined.Pattern design and technical parameters canbe output,which offers a great convenience for the fac-tory.展开更多
The stability and reliability of a tilting index table should be considered at the design stage. A design method for the lightweight and improvement of the stability of the structure in a tilting index table was propo...The stability and reliability of a tilting index table should be considered at the design stage. A design method for the lightweight and improvement of the stability of the structure in a tilting index table was proposed using a commercial analysis program, ANSYS Workbench 12, by analyzing the static-thermal characteristics of the developed high-accuracy tilting index table at its design stage. The results of the performed structural analysis show that the maximum stress is generated at the stock tail part. An optimum design for the stock tail part was carried out to reduce the maximum stress and deformation. Also, the design variables were determined by considering the support of the stock tail part for the C-axis body. In the comparison of the results before and after the optimization, the maximum deformation and stress are improved by 2.8% and 8%, respectively.展开更多
Knowledge acquisition has always been the bottleneck of artificial intelligence. It is the critical point in product family design. Here a knowledge acquisition method was introduced based on scenario model and reposi...Knowledge acquisition has always been the bottleneck of artificial intelligence. It is the critical point in product family design. Here a knowledge acquisition method was introduced based on scenario model and repository grid and attribute ordering table technology. This method acquired knowledge through providing product design cases to expert, and recording the means and knowledge used by the expert to describe and resolve problems. It used object to express design entity, used scenario to describe the design process, used Event-Condition-Action(ECA) rule to drive design process, and with the help of repository grid and attribute ordering table technology to acquire design knowledge. It’s a good way to capture explicit and implicit knowledge. And its validity is proved with respective examples.展开更多
March is a right party time for friends to get together to enjoy the smell of early spring. Moreover, people would like to take off the thick winter coat to showcase their colorful attitude towards the warm spring sun...March is a right party time for friends to get together to enjoy the smell of early spring. Moreover, people would like to take off the thick winter coat to showcase their colorful attitude towards the warm spring sunshine. Here, an annual fashion feast in Beijing not only could provide you a visual inspiration of trend, but also would tell you what’s the most "in" factors in the coming season.展开更多
基金Beijing Nova Program under Grant No.2022036National Key Research and Development Program under Grant No.2019YFC1521000。
文摘To quantify the seismic effectiveness of the most commonly used fishing line tie up method for securing museum collections and optimize fixed strategies for exhibitions,shaking table tests of the seismic systems used for typical museum collection replicas have been carried out.The influence of body shape and fixed measure parameters on the seismic responses of replicas and the interaction behavior between replicas and fixed measures have been explored.Based on the results,seismic effectiveness evaluation indexes of the tie up method are proposed.Reasonable suggestions for fixed strategies are given,which provide a basis for the exhibition of delicate museum collections considering the principle of minimizing seismic responses and intervention.The analysis results show that a larger ratio of height of mass center to bottom diameter led to more intense rocking responses.Increasing the initial pretension of fishing lines was conducive to reducing the seismic responses and stress variation of the lines.Through comprehensive consideration of the interaction forces and effective securement,it is recommended to apply 20%of breaking stress as the initial pretension.For specific museum collections that cannot be effectively protected by the independent tie up method,an optimized strategy of a combination of fishing lines and fasteners is recommended.
基金National Key Research and Development Plan,China under Grant No.2017YFC1500702the National Natural Science Foundation of China under Grant No.51478338。
文摘As one of the main load-carrying components of cable-stayed bridges,bridge towers are typically required to remain elastic even when subjected to severe ground motions with a 2%-3%probability of exceedance in 50 years.To fulfill this special requirement imposed by current seismic design codes,reinforcement ratios in the bridge towers have to be kept significantly higher than if limited ductility behavior of the tower is allowed.In addition,since the foundation capacity is closely related to the moment and shear capacities of the bridge tower,a large increase in bridge construction cost for elastically designed cable-stayed bridge is inevitable.To further investigate the possibility of limited ductility bridge tower design strategies,a new 1/20-scale cable-stayed bridge model with H-shaped bridge towers designed according to strong strut-weak tower column design was tested.The shake table experimental results are compared with a previous strong tower column-weak strut designed full bridge model.A comparison of the results show that ductility design with plastic hinges located on tower columns,i.e.,strong strut-weak tower column design,is another effective seismic design strategy that results in only small residual displacement at the top of the tower column,even under very severe earthquake excitations.
基金financially supported by National Natural Science Foundation of China(51708163 and 41907247)Hainan Provincial Natural Science Foundation of China(520MS018)the foundation from the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(SKLGP2021K008)。
文摘Physical model test is an effective way to unveil the dynamic response of a slope under seismic condition.The similarity design is the key of physical model test.An isolated similarity design method for shaking table tests was proposed and verified in this work.In this method,the relevant physical quantities were divided into several subsystems and subcharacteristic equations for each subsystem were then established based on the Buckingham similarity theory.Large-scale shaking table tests on a reinforced slope were adopted herein to illustrate the application of the proposed isolated similarity design method.The similarity system for the studied slope was divided into four parts in the process of similarity design.The geometrical dimension L,densityρand gravity g were selected as fundamental quantities for the similarity design,and four subcharacteristic equations were established for each subsystem.The dynamic responses of the recorded acceleration and axis force show that the seismic waves propagate well in the model slope.The proposed isolated similarity design method solves the conflict between the similarity requirement for all relevant physical quantities and the difficulty of test model fabrication to satisfy all similarity relations.
文摘Climatic considerations in the architectural design of most contemporary buildings have not been strictly adhered to by building design and construction professionals in the last few decades in the developing world, with users being denied the inevitable interactions with the natural surroundings offered by climate. The situation leads to utilization of energy-based equipment such as air conditioner that is environmentally unsustainable. The study aimed to evaluate the bioclimatic design features of residential building typologies and to identify features that can enhance the environmental responsiveness of buildings. This study adopted the Mahoney Tables to undertake a climatic analysis to develop appropriate design guidelines for the climate context. The developed design guidelines were then used to evaluate the bio-climatic design features of a sampled number of residential building types. The study revealed that features of the buildings reflect the recommended design guidelines, but to varied extents among the building typologies that were studied. Occupants generally find their spaces unsatisfactory primarily as a result of the experience of hot discomfort. The findings are expected to engender a renewed interest in the design of buildings in response to prevailing climatic conditions to reduce reliance on energy use and to serve as a useful reference for contemporary architectural design practice and education.
基金This work wus supported hy China Textile Universily and the corporatoin foundation
文摘Sleeve pattern design of men’ s tailored - suit is one of the most difficult problems of clothing pattern design. Based on the experimental studies of armhole girth, the difference of armhole width and crown height, crown angle, under sleeve curve’s diagonal line length, crown ease and its distribution rule, this paper mainly deals with the sleeve pattern design of tailored - suit for Chinese men. The influences of these factors are discussed and furthermore, some qualitative, quantifiable conclusions are drawn to design perfect pattern of men’ s tailored - suit sleeve.
文摘Applying calculation method in alloy design should be an important tendency due to its characters of inexpensive cost, high efficiency and prediction. DOS calculations of AuSn, AsSn and SbSn Sn- based alloys have been investigated by employing DV - Xa method, in which different cluster models were adopted to calculate electron structure.It is proved that some regulations must be taken into ac- count in order to carry out alloy design calculation successfully,which are described in this paper in detail.
文摘To meet the development trend of multi-bar warp knit-ting machine towards high-speed,advanced technologyand computer control and the requirements of variousproducts with small quantity,there are many researcheson the computer-aided pattern design of multi-barwarp knitted fabrics.In terms of the special propertiesof the computer-aided pattern design of multi-barwarp knitted fabrics,the Object Oriented Program(OOP)programming-Object Windows class Library(OWL)programming is selected.According to thecharacters of the OWL programming,various functionsare defined.Pattern design and technical parameters canbe output,which offers a great convenience for the fac-tory.
基金Project(70004782) supported by the Regional Strategic Technology Development Program of the Ministry of Knowledge Economy(MKE) of KoreaProject(2011-0017407) supported by the National Research Foundation of Korea (NRF) Funded by the Korea Government (MEST)
文摘The stability and reliability of a tilting index table should be considered at the design stage. A design method for the lightweight and improvement of the stability of the structure in a tilting index table was proposed using a commercial analysis program, ANSYS Workbench 12, by analyzing the static-thermal characteristics of the developed high-accuracy tilting index table at its design stage. The results of the performed structural analysis show that the maximum stress is generated at the stock tail part. An optimum design for the stock tail part was carried out to reduce the maximum stress and deformation. Also, the design variables were determined by considering the support of the stock tail part for the C-axis body. In the comparison of the results before and after the optimization, the maximum deformation and stress are improved by 2.8% and 8%, respectively.
文摘Knowledge acquisition has always been the bottleneck of artificial intelligence. It is the critical point in product family design. Here a knowledge acquisition method was introduced based on scenario model and repository grid and attribute ordering table technology. This method acquired knowledge through providing product design cases to expert, and recording the means and knowledge used by the expert to describe and resolve problems. It used object to express design entity, used scenario to describe the design process, used Event-Condition-Action(ECA) rule to drive design process, and with the help of repository grid and attribute ordering table technology to acquire design knowledge. It’s a good way to capture explicit and implicit knowledge. And its validity is proved with respective examples.
文摘March is a right party time for friends to get together to enjoy the smell of early spring. Moreover, people would like to take off the thick winter coat to showcase their colorful attitude towards the warm spring sunshine. Here, an annual fashion feast in Beijing not only could provide you a visual inspiration of trend, but also would tell you what’s the most "in" factors in the coming season.
