Development of multi-functional anchorage support dynamic-static coupling performance test system and its application

In underground engineering with complex conditions,the bolt(cable)anchorage support system is in an environment where static and dynamic stresses coexist,under the action of geological conditions such as high stresses and strong disturbances and construction conditions such as the application of high prestress.It is essential to study the support components performance under dynamic-static coupling conditions.Based on this,a multi-functional anchorage support dynamic-static coupling performance test system(MAC system)is developed,which can achieve 7 types of testing functions,including single component performance,anchored net performance,anchored rock performance and so on.The bolt and cable mechanical tests are conducted by MAC system under different prestress levels.The results showed that compared to the non-prestress condition,the impact resistance performance of prestressed bolts(cables)is significantly reduced.In the prestress range of 50–160 k N,the maximum reduction rate of impact energy resisted by different types of bolts is 53.9%–61.5%compared to non-prestress condition.In the prestress range of 150–300 k N,the impact energy resisted by high-strength cable is reduced by76.8%–84.6%compared to non-prestress condition.The MAC system achieves dynamic-static coupling performance test,which provide an effective means for the design of anchorage support system.

Design and Development of Composite Plywood that Integrates Fire Resistance,Water Resistance and Wear Resistance

In order to improve the fire resistance,water resistance and wear resistance of ordinary plywood products in the wood processing industry,three composite structures of plywood products S1,S2 and S3 were designed in this paper,and a reasonable production process was proposed.Through the physical and mechanical properties and fire resistance testing and technical and economic analysis,the applicability of composite plywood was evaluated.The results of the study showed that the physical mechanics of the three kinds of composite structure plywood met the standard requirements,and their fire resistance was far better than that of ordinary plywood.Among them,the S1 structural board had the best overall physical and mechanical properties.The S3 structural board showed the best fire resistance,which was about 1.9 times more than that of ordinary plywood,and the added cost was the lowest.The thin cork board added to the S2 structural board had poor fire performance since the air in the cork board cavities had a certain combustion-supporting effect,which inhibited the fire resistance of high-pressure laminate(HPL)layer.Moreover,the additional cost of the S2 board was the highest,and its comprehensive performance was the worst.The S3 structural plywood product composed of HPL fireproof board with a thickness of about 1 mm in the surface layer and ordinary plywood with a thickness of about 12 mm in the core layer was the most cost-effective product,which could meet the needs of various fields such as construction,home furnishing,decoration and transportation.

Design of Multifunctional Milk Powder Spoon Based on Environment-friendly and Developmental Concept

Recycling of junks is positive for the environmental protection.Along with the proposal of three-child policy,purchase volume of milk powder surely will experience a drastic growth,and the milk powder spoon as an affiliated product will win the attention of parents.Against the background of consumption upgrading,consumers have had higher requirements on the humanization and safety design of products.Most of milk powder spoons on the market are plastic,and the disposal of waste milk powder spoon has gradually become a burden for the environment.Based on the environment-friendly and developmental concept,and also the characteristics of infant development,this paper proposed the“in-one”design,applied color and tactile designs into the milk powder design,chose food grade silicone to make the milk powder spoon not only a spoon but also a baby teether toy,so as to expand the service life and functions of the product,meet the requirements of saving energy,protecting environment and developing circular economy,which also to some extent reduces the burden on environment brought by plastics,improves the efficiency of junk recycling,and meet the individualized needs of consumers.

Design and Characterization of an Aerosol Test Chamber for Emergency Response Patient Contamination Control Simulation and Research

Contaminated or infected patients present a risk of cross-contamination for emergency responders, attending medical personnel and medical facilities as they enter a treatment facility. The controlled conditions of an aerosol test chamber are required to examine factors of contamination, decontamination, and cross-contamination. This study presents the design, construction, and a method for characterizing an aerosol test chamber for a full-sized manikin on a standard North Atlantic Treaty Organization litter. The methodology combined air velocity measurements, aerosol particle counts and size distributions, and computational fluid dynamics modeling to describe the chamber’s performance in three dimensions. This detailed characterization facilitates future experimental design by predicting chamber performance for a variety of patient-focused research.

Current situation and development trend of design methods for subgrade structure of high speed railways

Purpose–This method will become a new development trend in subgrade structure design for high speed railways.Design/methodology/approach–This paper summarizes the structural types and design methods of subgrade bed for high speed railways in China,Japan,France,Germany,the United States and other countries based on the study and analysis of existing literature and combined with the research results and practices of high speed railway subgrade engineering at home and abroad.Findings–It is found that in foreign countries,the layered reinforced structure is generally adopted for the subgrade bed of high speed railways,and the unified double-layer or multi-layer structure is adopted for the surface layer of subgrade bed,while the simple structure is adopted in China;in foreign countries,different inspection parameters are adopted to evaluate the compaction state of fillers according to their respective understanding and practice,while in China,compaction coefficient,subsoil coefficient and dynamic deformation modulus are adopted for such evaluation;in foreign countries,the subgrade top deformation control method,the subgrade bottom deformation control method,the subsurface fill strength control method are mainly adopted in subgrade bed structure design of high speed railways,while in China,dynamic deformation control of subgrade surface and dynamic strain control of subgrade bed bottom layer is adopted in the design.However,the cumulative deformation of subgrade caused by train cyclic vibration load is not considered in the existing design methods.Originality/value–This paper introduces a new subgrade structure design method based on whole-process dynamics analysis that meets subgrade functional requirements and is established on the basis of the existing research at home and abroad on prediction methods for cumulative deformation of subgrade soil.

On Software Application Database Constraint-driven Design and Development

This paper presents a methodology driven by database constraints for designing and developing(database)software applications.Much needed and with excellent results,this paradigm guarantees the highest possible quality of the managed data.The proposed methodology is illustrated with an easy to understand,yet complex medium-sized genealogy software application driven by more than 200 database constraints,which fully meets such expectations.

Analysis on the development of chemically-improved soil in railway engineering

Purpose-Explore the development trend of chemically-improved soil in railway engineering.Design/methodology/approach–In this paper,the technical standards home and abroad were analyzed.Laboratory test,field test and monitoring were carried out.Findings–The performance design system of the chemically-improved soil should be established.Originality/value–On the basis of the performance design,the test methods and standards for various properties of chemically-improved soil should be established to evaluate the improvement effect and control the engineering quality.

Development Methodologies for Network Softwarization: A Comparison of DevOps, NetOps, and Verification

This white paper explores three popular development methodologies for network softwarization: DevOps, NetOps, and Verification. The paper compares and contrasts the strengths and weaknesses of each approach and provides recommendations for organizations looking to adopt network softwarization.

Analysis of the Architectural Design Talent Development Direction by Investigating the Employment Status of Architectural Design Graduates

Based on a comprehensive investigation of the employment status of architectural design graduates at a certain university,this paper analyzes the correctness of the talent development direction of architectural design in hopes of pro-viding a valuable reference for further teaching reform and strengthening school-enterprise collaboration.The research re-sults show that architectural design is the main choice of graduates,accounting for as high as 63%,and traditional architec-tural design skills continue to be in demand in the market.Employment in fields such as interior design,BIM design,and green architecture is also included.The distribution of job positions for graduates is mainly in the areas of scheme design assistants and construction drawing design,requiring software operation,communication,scheme design,and construction drawing skills.This paper also proposes talent development measures such as optimizing the curriculum,strengthening faculty construction,and deepening school-enterprise collaboration,in order to improve the quality of talent development and the competitiveness of graduates.

Design of Accelerated Life Test Plans——Overview and Prospect

Accelerated life test(ALT) is currently the main method of assessing product reliability rapidly, and the design of efficient test plans is a critical step to ensure that ALTs can assess the product reliability accurately, quickly, and economically. With the promotion of the national strategy of civil-military integration, ALT will be widely used in the research and development(R&D) of various types of products, and the ALT plan design theory will face further challenges. To aid engineers in selecting appropriate theories and to stimulate researchers to develop the theories required in engineering, with focus on the demands for theory research that arise from the implementation of ALT, this paper reviews and summarizes the development of ALT plan design theory. The development of the theory and method for planning optimal ALT for location-scale distribution, which is the most applied and mature theory of designing the optimal ALT plan, are described in detail. Taking this as the center of radiation, some problems that ALT now faces, such as the verification of the statistical model, limitation of sample size, solutions of resource limits, optimization of the test arrangement, and management of product complexity, are discussed, and the general ideas and methods of solving these problems are analyzed. Suggestions for selecting appropriate ALT plan design theories are proposed, and the urgent solved theory problems and opinions of their solutions are proposed. Based on the principle of convenience for engineers to select appropriate methods according to the problems found in practice, this paper reviews the development of optimal ALT plan design theory by taking the engineering problems arising from the ALT implementation as the main thread, provides guidelines on selecting appropriate theories for engineers, and proposes opinions about the urgent solved theory problems for researchers.

The “Static” and “Dynamic” Design Verification Stages of the Lean Development Process: Automotive Industry

he design verification steps that take place in today’s automotive industry, which constitute the values of each successive or simultaneous phase in the new product development process, create a complex structure with the inclusion of each new technology and discipline. Therefore, step by step, each design verification phase definition in the flow contains important phase transition measurements or approval tolerances that ensure the simplicity and continuity of vehicle development processes. In addition, classification of design verification stages within the framework of this study or evaluation in two classes (static and dynamic) is a new approach, but it is a synthesis with the analysis of the new product development process. The vehicle’s basic structure, which constitutes the ergonomic and functional requirements of the vehicle in a static environment, takes into account the dynamic environment variables with crash or accident tests. Increasing new technology adaptations in the automotive industry have changed the new product development process that performs this function structurally and created the concept of design verification under consecutive or simultaneous process simplicity. From the autonomous driving to the use of alternative energy, possible accident scenarios and design verification phase transitions in the integration of parts and systems of the newly developed vehicle create a new structure that models and directs the lean product development process especially in the automotive industry in the coming days. In the lean product development process that takes place in the automotive industry, the design verification transition steps or the approval-control analysis of the development stages, which form a new and effective approach, are re-modeling the entire flow. Therefore, successful execution of design verification steps used in the control of new interdisciplinary product development phase transitions provides value creation.?Within the scope of this study, the effectiveness of the static and dynamic design verification steps, which are carried out in 5 global automotive companies included in the research, which constitute the stage transitions of the new product development process, has been measured. Apart from the design verification transition stages, the process variables that differ among the automotive companies involved in the research are excluded from the scope of this study. In other words, in field researches in the automotive industry, new vehicle design steps or basic engineering steps in the new product development process steps, while creating independent fixed variables, interdisciplinary collaborations, static and dynamic design verification transition stages they perform, or their sequence in the basic flow, is accepted as a dependent variable. Therefore, in the study, the positive effect of the automotive companies that included the static and dynamic design verification phase transition approvals in the lean product development process was investigated. Under the comparative analysis structure of the research, the effect of automotive companies, which accept international vehicle specifications as static design verification input, on market performance has been examined in depth. The detailed depth in the comparison analysis conducted under the second field studies of the study is due to the prediction of dynamic design verification stages to provide a high impact on the market performance, according to the static verification analysis. The new product development stages of the dependent variables were fixed and the flow-oriented?“effect”?of the independent variables in the basic process influenced by the design verification activities was analyzed under the new automotive industry company comparisons. In addition, the impact of the automotive design activities that make up the comparison analysis of the research on the scope of the lean product development stage and its effect on the basic process flow has been demonstrated competition-oriented. Therefore, sub-variables, options, criteria, results, which form a defined comparison problem, create basic test values that affect the problem.

Design and Development of TGPSIS Based on SuperMap—Map Subsystem

The Three Gorges Project (TGP for short) is the key project to train and develop the Yangtze River of China,with multi-objects of flood defence,electricity generation,shipping,etc.However,sediment plays an important role in beth constructing of engineering and exerting efficiency of TGP.Special attention,there- fore,has been paid to sediment problem of TGP since the very beginning of this engineering's pregnancy.Up to now,much observed data and fruitful researches about TGP have come into being,and a sci...

Landscape Design of Commercial Housing Based on the Comprehensive Development Model of City Complex——A Case Study on Landscape Design of Chenglong-International

With the acceleration of urbanization, city complex as an intensive urban organization form has gradually grown up in China. By consulting relevant documents of city complex, emergence background and related concepts of city complex were introduced, landscape design of Chenglong-International was analyzed to propose landscape design principles and concepts of city complex under the compound development model, landscape processing techniques of outdoor functional subareas and transitional areas were introduced to provide useful reference for the landscape design of city complex.

Development of a rapid test kit for SARS-CoV-2:an example of product design

We present an example of applying'need-driven'product design principle to the development of a rapid test kit to detect SARS-COV-2(COVID-19).The tests are intended for use in the field and,longer term,for home use.They detect whether a subject is currently infected with the virus and is infectious.The urgent need for large numbers of tests in field setting imposes constraints such as short test time and lack of access to specialist equipment,laboratories and skilled technicians to perform the test and interpret results.To meet these needs,an antigen test based on RT-LAMP with colorimetric readout was chosen.Direct use of swab sample with no RNA extraction was explored.After extensive experimental study(reported elsewhere),a rapid test kit has been fabricated to satisfy all design criteria.

Development and Test of Hydrostatic Extraction Scheme in Spectral Model

The introduction of 'hydrostatic extraction' scheme, or 'standard stratification approximation', into spectral model gained some advantages compared with commonly used schemes. However, computational instability may occur for high vertical resolution versions if the stratification parameter C0 taken as a constant. In this paper, the possible cause leading to the instability is discussed and an improved scheme presented where C0 is generalized to be a function of both height and latitudes. Hence the reference atmosphere gets closer to the real atmosphere and the temperature deviation field to be expanded becomes smoother everywhere. Test by real case forecasts shows good computational stability of the new scheme and better prediction performance than-usual schemes of spectral model.

Optimal design and dynamic impact tests of removable bollards

Anti-ram bollard systems, which are installed around buildings and infrastructure, can prevent unauthorized vehicles from entering, maintain distance from vehicle-borne improvised explosive devices （VBIED） and reduce the corresponding damage. Compared with a fixed bollard system, a removable bollard system provides more flexibility as it can be removed when needed. This paper first proposes a new type of K4-rated removable anti-ram bollard system. To simulate the collision of a vehicle hitting the bollard system, a finite element model was then built and verified through comparison of numerical simulation results and existing experimental results. Based on the orthogonal design method, the factors influencing the safety and economy of this proposed system were examined and sorted according to their importance. An optimal design scheme was then produced. Finally, to validate the effectiveness of the proposed design scheme, four dynamic impact tests, including two front impact tests and two side impact tests, have been conducted according to BSI Specifications. The residual rotation angles of the specimen are smaller than 30~ and satisfy the requirements of the BSI Specification.

Design Method of Equipment Optimization Development Based on Standardization Theory

The matters of equipment optimization development are usually discrete,fuzzy and non-quantitative.It is difficult directly to optimize the equipment development with a mathematical model.A set of methods for designing the equipment optimization development with six dimensions and eight main elements is established based on the theory and method of standardization.The top-tier design space of systematic development of equipment is built up by the relations of basic models,series and model spectrums.The relations of time and space for equipment optimization development are established.The design processes of a six dimension systematic space are expounded.The connotation of each plan in the main system space is analyzed.A design method for an entire equipment is established with standardization theory.The coordinating design methods of equipment technical system and the optimization design methods of equipment integration are discussed.The design methods for universalization and serialization of components and parts are established.The design methods of equipment optimization development highlight the relations of the basic model of platform,the serialization of platform basic models,the modularization of equipment functions,the model spectrum of variant equipment,and the universalization and serialization of components and parts.

Modelling Design and Test of Steam Centrifugal Compressor

ＭｏｄｅｌｉｎｇＤｅｓｉｇｎａｎｄＴｅｓｔｏｆＳｔｅａｍＣｅｎｔｒｉｆｕｇａｌＣｏｍｐｒｅｓｏｒＱＩＮＲｅｎＮＩＵＬｉｍｉｎ＊ＺＨＥＮＧＱｕｎ＊（秦仁）（牛利民）（郑群）（Ｄｅｐｔ．ｏｆＰｏｗｅｒＥｎｇｉｎｅｒｉｎｇ，ＨａｒｂｉｎＩｎｓｔｉｔｕｔｅｏ...

Software Development for Digital Control of WDW Series Testing Machine and Measurement of K_(IC)

Software has been developed for digital control of WDW series testing machine and the measurement of fracture toughness by modularized design. Development of the software makes use of multi-thread and serial communication techniques, which can accurately control the testing machine and measure the fracture toughness in real-time. Three-point bending specimens were used in the measurement. The software operates stably and reliably, expanding the function of WDW series testing machine.