Space-deployable mechanisms can be used as supporting structures for large-diameter antennas in space engineering.This study proposes a novel method for constructing the surface design of space reflector antennas base...Space-deployable mechanisms can be used as supporting structures for large-diameter antennas in space engineering.This study proposes a novel method for constructing the surface design of space reflector antennas based on polar scissor units.The concurrency and deployability equations of the space scissor unit with definite surface constraints are derived using the rod and vector methods.Constraint equations of the spatial transformation for space n-edge polar scissor units are summarized.A new closed-loop deployable structure,called the polar scissor deployable antenna(PSDA),is designed by combining planar polar scissor units with spatial polar scissor units.The overconstrained problem is solved by releasing the curve constraint that locates at the end-point of the planar scissor mechanism.Kinematics simulation and error analysis are performed.The results show that the PSDA can effectively fit the paraboloid of revolution.Finally,deployment experiments verify the validity and feasibility of the proposed design method,which provides a new idea for the construction of large space-reflector antennas.展开更多
This paper discusses the basic principle and design m ethod for light distribution of car lamp, introduces an important development: h igh efficient and flexible car lamp with reflecting light distribution-segmente d ...This paper discusses the basic principle and design m ethod for light distribution of car lamp, introduces an important development: h igh efficient and flexible car lamp with reflecting light distribution-segmente d reflector (multi-patch) car lamp, and puts out a design method for segmented reflector based on error analysis. Unlike classical car lamp with refractive lig ht distribution, the method of reflecting light distribution gives car lamp desi gn more flexibility. In the case of guarantying the lightness of car lamp and sa tisfying the standard demand for the light distribution, the design of the exter ior of the car lamp has more freedom. The high gradient of car lamp is more suit able for the demand of streamline of the car exterior. The shape of segmented re flector obtained by theory calculating of car lamp reflecting light distribution is only an ideal shape, which usually has considerable differences with the fin al shape and will influences light distribution. There exist difference between the calculated reflector and manufactured reflector. Owing to light reflecting c haracter, the small diversification of the reflector will reduce the big diver sification of the light distribution shape on light distribution screen in 25 -meter place, so light distribution quality can’t be ensured. To ensure the re flector by light distribution calculation accordance to reflector by practical m anufacture, the error effect of surface shape must be reasonably considered name ly the error effect of manufacture tache. The paper establishes error-analyzing model for segmented reflector according to the analysis of error of making proc ess for segmented reflector. Based on this error-analyzing model and by use of the analyzing software developed for segmented reflector light distribution, it could reasonably consider reflector errors made by manufacturing, such as reflec tor surface spray-painting and plating aluminum, which could give out shapes of reflector patches for segmented reflector well and truly, and direct the plan o f making process efficiently. The method put by the paper has successfully appli ed to develop segmented reflector lamp for several type cars and obtained good e ffect for the factory.展开更多
The Tianma 65 m radio telescope(TMRT)at Shanghai is a fully steerable single-dish radio telescope in China,operating at centimeter to millimeter wavelengths(1.25 GHz to 50 GHz).This paper presents details on the main ...The Tianma 65 m radio telescope(TMRT)at Shanghai is a fully steerable single-dish radio telescope in China,operating at centimeter to millimeter wavelengths(1.25 GHz to 50 GHz).This paper presents details on the main specifications,design,performance analysis,testing,and construction of the telescope antenna.The measured total efficiency is better than 50%over the whole elevation angle range,first sidelobe levels are less than−20 dB,antenna system noise temperatures are less than 70 K at 30°elevation angle,and pointing accuracy is less than 3″.The measured and calculated results are in good agreement,verifying the effectiveness of the design and analysis.展开更多
基金Supported by National Key R&D Program of China(Grant No.2018YFB1304600)National Natural Science Foundation of China(Grant No.51775541)+1 种基金CAS Interdisciplinary Innovation Team of China(Grant No.JCTD-2018-11)Hundred-Talent Program(Chinese Academy of Sciences)(Grant No.Y8A3210304).
文摘Space-deployable mechanisms can be used as supporting structures for large-diameter antennas in space engineering.This study proposes a novel method for constructing the surface design of space reflector antennas based on polar scissor units.The concurrency and deployability equations of the space scissor unit with definite surface constraints are derived using the rod and vector methods.Constraint equations of the spatial transformation for space n-edge polar scissor units are summarized.A new closed-loop deployable structure,called the polar scissor deployable antenna(PSDA),is designed by combining planar polar scissor units with spatial polar scissor units.The overconstrained problem is solved by releasing the curve constraint that locates at the end-point of the planar scissor mechanism.Kinematics simulation and error analysis are performed.The results show that the PSDA can effectively fit the paraboloid of revolution.Finally,deployment experiments verify the validity and feasibility of the proposed design method,which provides a new idea for the construction of large space-reflector antennas.
文摘This paper discusses the basic principle and design m ethod for light distribution of car lamp, introduces an important development: h igh efficient and flexible car lamp with reflecting light distribution-segmente d reflector (multi-patch) car lamp, and puts out a design method for segmented reflector based on error analysis. Unlike classical car lamp with refractive lig ht distribution, the method of reflecting light distribution gives car lamp desi gn more flexibility. In the case of guarantying the lightness of car lamp and sa tisfying the standard demand for the light distribution, the design of the exter ior of the car lamp has more freedom. The high gradient of car lamp is more suit able for the demand of streamline of the car exterior. The shape of segmented re flector obtained by theory calculating of car lamp reflecting light distribution is only an ideal shape, which usually has considerable differences with the fin al shape and will influences light distribution. There exist difference between the calculated reflector and manufactured reflector. Owing to light reflecting c haracter, the small diversification of the reflector will reduce the big diver sification of the light distribution shape on light distribution screen in 25 -meter place, so light distribution quality can’t be ensured. To ensure the re flector by light distribution calculation accordance to reflector by practical m anufacture, the error effect of surface shape must be reasonably considered name ly the error effect of manufacture tache. The paper establishes error-analyzing model for segmented reflector according to the analysis of error of making proc ess for segmented reflector. Based on this error-analyzing model and by use of the analyzing software developed for segmented reflector light distribution, it could reasonably consider reflector errors made by manufacturing, such as reflec tor surface spray-painting and plating aluminum, which could give out shapes of reflector patches for segmented reflector well and truly, and direct the plan o f making process efficiently. The method put by the paper has successfully appli ed to develop segmented reflector lamp for several type cars and obtained good e ffect for the factory.
文摘The Tianma 65 m radio telescope(TMRT)at Shanghai is a fully steerable single-dish radio telescope in China,operating at centimeter to millimeter wavelengths(1.25 GHz to 50 GHz).This paper presents details on the main specifications,design,performance analysis,testing,and construction of the telescope antenna.The measured total efficiency is better than 50%over the whole elevation angle range,first sidelobe levels are less than−20 dB,antenna system noise temperatures are less than 70 K at 30°elevation angle,and pointing accuracy is less than 3″.The measured and calculated results are in good agreement,verifying the effectiveness of the design and analysis.
