2D multifunctional devices:from material preparation to device fabrication and neuromorphic applications

Neuromorphic computing systems,which mimic the operation of neurons and synapses in the human brain,are seen as an appealing next-generation computing method due to their strong and efficient computing abilities.Two-dimensional (2D) materials with dangling bond-free surfaces and atomic-level thicknesses have emerged as promising candidates for neuromorphic computing hardware.As a result,2D neuromorphic devices may provide an ideal platform for developing multifunctional neuromorphic applications.Here,we review the recent neuromorphic devices based on 2D material and their multifunctional applications.The synthesis and next micro–nano fabrication methods of 2D materials and their heterostructures are first introduced.The recent advances of neuromorphic 2D devices are discussed in detail using different operating principles.More importantly,we present a review of emerging multifunctional neuromorphic applications,including neuromorphic visual,auditory,tactile,and nociceptive systems based on 2D devices.In the end,we discuss the problems and methods for 2D neuromorphic device developments in the future.This paper will give insights into designing 2D neuromorphic devices and applying them to the future neuromorphic systems.

Design and Fabrication of a High-Voltage nMOS Device

High-voltage nMOS devices are fabricated successfully and the key technology parameters of the process are optimized by TCAD software. Experiment results show that the device＇s breakdown voltage is 114V, the threshold voltage and maximum driven ability are 1.02V and 7.5mA（W/L = 50）, respectively. Experimental results and simulation ones are compared carefully and a way to improve the breakdown performance is proposed.

Novel fabrication techniques for ultra-thin silicon based flexible electronics

Flexible electronics offer a multitude of advantages,such as flexibility,lightweight property,portability,and high durability.These unique properties allow for seamless applications to curved and soft surfaces,leading to extensive utilization across a wide range of fields in consumer electronics.These applications,for example,span integrated circuits,solar cells,batteries,wearable devices,bio-implants,soft robotics,and biomimetic applications.Recently,flexible electronic devices have been developed using a variety of materials such as organic,carbon-based,and inorganic semiconducting materials.Silicon(Si)owing to its mature fabrication process,excellent electrical,optical,thermal properties,and cost efficiency,remains a compelling material choice for flexible electronics.Consequently,the research on ultra-thin Si in the context of flexible electronics is studied rigorously nowadays.The thinning of Si is crucially important for flexible electronics as it reduces its bending stiffness and the resultant bending strain,thereby enhancing flexibility while preserving its exceptional properties.This review provides a comprehensive overview of the recent efforts in the fabrication techniques for forming ultra-thin Si using top-down and bottom-up approaches and explores their utilization in flexible electronics and their applications.

Machine Learning(ML)-Assisted Design and Fabrication for Solar Cells

Photovoltaic (PV) technologies have attracted great interest due to their capability of generating electricity directly from sunlight. Machine learning(ML) is a technique for computer to learn how to perform a specific task using known data. It can be used in many areas and has become a hot research topic recently due to the rapid accumulation of data and advancement of computer hardware. The application of ML techniques in the design and fabrication of solar cells started slowly but has recently gained tremendous momentum. An exhaustive compilation of the literatures indicates that all the major aspects in the research and development of solar cells can be effectively assisted by ML techniques. If combined with other tools and fed with additional theoretical and experimental data, more accurate and robust results can be achieved from ML techniques. The aspects can be grouped into four categories:prediction of material properties,optimization of device structures, optimization of fabrication processes, and reconstruction of measurement data. A statistical analysis of the literatures shows that artificial neural network (ANN) and genetic algorithm (GA) are the two most applied ML techniques and the topics in the optimization of device structures and optimization of fabrication processes are more popular.This article can be used as a reference by all PV researchers who are interested in ML techniques.

Recent advances in fabrication and functions of neuromorphic system based on organic field effect transistor

The development of various artificial electronics and machines would explosively increase the amount of information and data,which need to be processed via in-situ remediation.Bioinspired synapse devices can store and process signals in a parallel way,thus improving fault tolerance and decreasing the power consumption of artificial systems.The organic field effect transistor(OFET)is a promising component for bioinspired neuromorphic systems because it is suitable for large-scale integrated circuits and flexible devices.In this review,the organic semiconductor materials,structures and fabrication,and different artificial sensory perception systems functions based on neuromorphic OFET devices are summarized.Subsequently,a summary and challenges of neuromorphic OFET devices are provided.This review presents a detailed introduction to the recent progress of neuromorphic OFET devices from semiconductor materials to perception systems,which would serve as a reference for the development of neuromorphic systems in future bioinspired electronics.

Advances in micro cutting tool design and fabrication

Microcutting is a precision technology that offers flexible fabrication of microfeatures or complex three-dimensional components with high machining accuracy and superior surface quality.This technology may offer great potential as well as advantageous process capabilities for the machining of hard-to-cut materials,such as tungsten carbide.The geometrical design and dimension of the tool cutting edge is a key factor that determines the size and form accuracy possible in the machined workpiece.Currently,the majority of commercial microtools are scaled-down versions of conventional macrotool designs.This approach does not impart optimal performance due to size effects and associated phenomena.Consequently,in-depth analysis and implementation of microcutting mechanics and fundamentals are required to enable successful industrial adaptation in microtool design and fabrication methods.This paper serves as a review of recent microtool designs,materials,and fabrication methods.Analysis of tool performance is discussed,and new approaches and techniques are examined.Of particular focus is tool wear suppression in the machining of hard materials and associated process parameters,including internal cooling and surface patterning techniques.The review concludes with suggestions for an integrated design and fabrication process chain which can aid industrial microtool manufacture.

Near-zero-adhesion-enabled intact wafer-scale resist-transfer printing for high-fidelity nanofabrication on arbitrary substrates

There is an urgent need for novel processes that can integrate different functional nanostructures onto specific substrates,so as to meet the fast-growing need for broad applications in nanoelectronics,nanophotonics,and fexible optoelectronics.Existing direct-lithography methods are difficult to use on fexible,nonplanar,and biocompatible surfaces.Therefore,this fabrication is usually accomplished by nanotransfer printing.However,large-scale integration of multiscale nanostructures with unconventional substrates remains challenging because fabrication yields and quality are often limited by the resolution,uniformity,adhesivity,and integrity of the nanostructures formed by direct transfer.Here,we proposed a resist-based transfer strategy enabled by near-zero adhesion,which was achieved by molecular modification to attain a critical surface energy interval.This approach enabled the intact transfer of wafer-scale,ultrathin-resist nanofilms onto arbitrary substrates with mitigated cracking and wrinkling,thereby facilitating the in situ fabrication of nanostructures for functional devices.Applying this approach,fabrication of three-dimensional-stacked multilayer structures with enhanced functionalities,nanoplasmonic structures with~10 nm resolution,and MoS2-based devices with excellent performance was demonstrated on specific substrates.These results collectively demonstrated the high stability,reliability,and throughput of our strategy for optical and electronic device applications.

In-plane micro-sized energy storage devices:From device fabrication to integration and intelligent designs

The rapid development of micro-electronics raises the demand of their power sources to be simplified,miniaturized and highly integratable with other electronics on a chip.In-plane Micro-sized energy storage devices(MESDs),which are composed of interdigitated electrodes on a single chip,have aroused particular attentions since they could be easily integrated with other miniaturized electronics,reducing the complexity of overall chip design via removing complex interconnections with bulky power sources.This review highlights the achievements in the device fabrication of in-plane MESDs,as well as their integration and intelligent designs.We also discussed the current challenges and future perspectives for the development of in-plane MESDs.

Digital biofabrication to realize the potentials of plant roots for product design

Technological and economic opportunities,alongside the apparent ecological benefits,point to biodesign as a new industrial paradigm for the fabrication of products in the twenty-first century.The presented work studies plant roots as a biodesign material in the fabrication of self-supported 3D structures,where the biologically and digitally designed materials provide each other with structural stability.Taking a material-driven design approach,we present our systematic tinkering activities with plant roots to better understand and anticipate their responsive behaviour.These helped us to identify the key design parameters and advance the unique potential of plant roots to bind discrete porous structures.We illustrate this binding potential of plant roots with a hybrid 3D object,for which plant roots connect 600 computationally designed,optimized,and fabricated bioplastic beads into a low stool.

Rational design and low-cost fabrication of multifunctional separators enabling high sulfur utilization in long-life lithium-sulfur batteries

The lithium-sulfur(Li-S)battery with an ultrahigh theoretical energy density has emerged as a promising rechargeable battery system.However,the practical applications of Li-S batteries are severely plagued by the sluggish reaction kinetics of sulfur species and notorious shuttling of soluble lithium polysulfides(LiPSs)intermediates that result in low sulfur utilization.The introduction of functional layers on separators has been considered as an effective strategy to improve the sulfur utilization in Li-S batteries by achieving effective regulation of LiPSs.Herein,a promising self-assembly strategy is proposed to achieve the low-cost fabrication of hollow and hierarchically porous Fe_(3)O_(4)nanospheres(p-Fe_(3)O_(4)-NSs)assembled by numerous extremely-small primary nanocrystals as building blocks.The rationally-designed p-Fe_(3)O_(4)-NSs are utilized as a multifunctional layer on the separator with highly efficient trapping and conversion features toward LiPSs.Results demonstrate that the nanostructured p-Fe_(3)O_(4)-NSs provide chemical adsorption toward LiPSs and kinetically promote the mutual transformation between LiPSs and Li_(2)S_(2)/Li_(2)S during cycling,thus inhibiting the LiPSs shuttling and boosting the redox reaction kinetics via a chemisorption-catalytic conversion mechanism.The enhanced wettability of the p-Fe_(3)O_(4)-NSs-based separator with the electrolyte enables fast transportation of lithium ions.Benefitting from these alluring properties,the functionalized separator with p-Fe_(3)O_(4)-NSs endows the battery with an admirable rate performance of 877 mAh g^(−1)at 2 C,an ultra-durable cycling performance of up to 2176 cycles at 1 C,and a promising areal capacity of 4.55 mAh cm^(−2)under high-sulfur-loading and lean-electrolyte conditions(4.29 mg cm^(−2),electrolyte/ratio:8μl mg^(−1)).This study will offer fresh insights on the rational design and low-cost fabrication of multifunctional separator to strengthen electrochemical reaction kinetics by regulating LiPSs conversion for developing efficient and long-life Li-S batteries.

Practice Exploration of Green Building Design in Prefabricated Residential Building Design

Prefabricated residential building design fully embodies the concept of green building and aligns with China’s strategic plan for sustainable development.However,there is a need to further optimize green building design methods,enhance the design quality of prefabricated residential buildings,and improve energy and resource utilization.Compared to traditional construction methods,prefabricated residential building design still faces several challenges during the actual construction process.These challenges include difficulties in design,material selection and processing,and the high demands for construction coordination.To strengthen the application of green building concepts in prefabricated residential design and effectively promote the sustainable development of the construction industry,this paper discusses practical measures for implementing green building design in prefabricated residential projects for reference.

OPTIMUM DESIGN OF PROCESSING CONDITION AND EXPERIMENTAL INVESTIGATION OF GRATING FABRICATION WITH HOT EMBOSSING LITHOGRAPHY

The cross-section profiles of polymer deformation in the hot embossing lithography process were studied by finite element method for various temperature, time and pressure. In order to successfully fabricate high-frequency grating lines, an optimal imprint condition was selected and the related experiments were carried out. The fabricated gratings were illuminated by the SEM image and AFM analysis, which agree well with the simulated results. Therefore, the finite element methods are helpful for a better comprehension of the polymer flow phenomena governing the pattern definition and the design of optimum processing conditions for successful grating fabrication.

Smart Cellulose‑Based Janus Fabrics with Switchable Liquid Transportation for Personal Moisture and Thermal Management

The Janus fabrics designed for personal moisture/thermal regulation have garnered significant attention for their potential to enhance human comfort.However,the development of smart and dynamic fabrics capable of managing personal moisture/thermal comfort in response to changing external environments remains a challenge.Herein,a smart cellulose-based Janus fabric was designed to dynamically manage personal moisture/heat.The cotton fabric was grafted with N-isopropylacrylamide to construct a temperature-stimulated transport channel.Subsequently,hydrophobic ethyl cellulose and hydrophilic cellulose nanofiber were sprayed on the bottom and top sides of the fabric to obtain wettability gradient.The fabric exhibits anti-gravity directional liquid transportation from hydrophobic side to hydrophilic side,and can dynamically and continuously control the transportation time in a wide range of 3–66 s as the temperature increases from 10 to 40℃.This smart fabric can quickly dissipate heat at high temperatures,while at low temperatures,it can slow down the heat dissipation rate and prevent the human from becoming too cold.In addition,the fabric has UV shielding and photodynamic antibacterial properties through depositing graphitic carbon nitride nanosheets on the hydrophilic side.This smart fabric offers an innovative approach to maximizing personal comfort in environments with significant temperature variations.

Design, Fabrication, and Modeling of CMOS-Compatible Double Photodiode

A double photodiode (PD) constructed by p+/N-well junction and N-well/p-sub junction was designed and fabricated in a UMC 0.18-μm CMOS process. Based on the device structure and mechanism of double PD, a novel small-signal equivalent circuit model considering the carrier transit effect and the parasitic RC time constant was presented. By this model with complete electronic components, the double PD can be incorporated in a commercial circuit simulator. The component values were extracted by fitting the measured S-parameters using simulated annealing algorithm, and a good agreement between the measurement and the simulation results was achieved. © 2017, Tianjin University and Springer-Verlag Berlin Heidelberg.

Identification of Stability Domains for Flow Parameters in Fused Filament Fabrication Using Acoustic Emission

In Fused Filament Fabrication(FFF),the state of material flow significantly influences printing outcomes.However,online monitoring of these micro-physical processes within the extruder remains challenging.The flow state is affected by multiple parameters,with temperature and volumetric flow rate(VFR)being the most critical.The study explores the stable extrusion of flow with a highly sensitive acoustic emission(AE)sensor so that AE signals generated by the friction in the annular region can reflect the flow state more effectively.Nevertheless,the large volume and broad frequency range of the data present processing challenges.This study proposes a method that initially selects short impact signals and then uses the Fast Kurtogram(FK)to identify the frequency with the highest kurtosis for signal filtration.The results indicate that this approach significantly enhances processing speed and improves feature extraction capabilities.By correlating AE characteristics under various parameters with the quality of extruded raster beads,AE can monitor the real-time state of material flow.This study offers a concise and efficient method for monitoring the state of raster beads and demonstrates the potential of online monitoring of the flow states.

Design and Fabrication of a 400 GHz InP-Based Arrayed Waveguide Grating with Flattened Spectral Response

A four-channel 400 GHz channel spacing InP-based arrayed waveguide grating with a flattened wavelength re- sponse by employing a multimode interference coupler at the input waveguide of the filter is prepared. The fabricated devices show a flattened spectral response with a broadened 3-dB bandwidth up to 3.5 nm, interchan- nel non-uniformity of 〈0. 7dB and excellent match to the simulation results.

6-7 Mechanical Design and Fabrication of 162.5 MHz Buncher for C-ADS Injector II

Two room temperature quarter wave resonator（QWR）buncher cavities with frequency of 162.5 MHz havebeen designed as parts of the medium energy beam transport line（MEBT1）for injectorⅡin China AcceleratorDriven Sub-critical System (C-ADS) project in order to focus the beam longitudinally, thus keeping the bunchlength and matching the beam to the acceptance of the superconducting linac.Buncher is one of major equipments in MEBT1. Fig. 1 shows the layout of the MEBT1. Its structure directlyaffects the performance of MEBT1. Buncher cavity takes an open-ended quarter-wavelength coaxial line cylindertype structure, the mechanical design of buncher cavity was done according to the physical design, adequate considerationought to be given to the factors of electromagnetic field distribution, power coupling, frequency tuning,cavity cooling and manufacturing, and so on.

Design, Fabrication and Experimentation of a Deep Drawing Machine

This paper presents the work implemented in designing, fabricating and operating a model of a cheap hydraulic DDM （deep drawing machine）, which is currently utilized in the manufacturing processes lab in the IED （Industrial Engineering Department） at An-Najah National University. The machine is used to conduct different experiments related to the deep drawing process. This work was implemented in three stages： the first was the design stage, in which all design calculations of the DDM elements were completed based on the specifications of the product （cup） to be drawn; the second was the construction stage, in which the DDM elements were fabricated and assembled at the engineering workshops of the university; the last was the operating and experimentation stage, in which the DDM was tested by conducting different experiments. The experience gained from designing and constructing such a mechanical lab equipment was found to be successful in terms of obtaining practical results that agree with those available in literature, cost-effective relative to the cost of a similar purchased equipment, as well as enhancing students＇ abilities in understanding the deep drawing process in particular and machine elements design concepts in general.

Design and Fabrication of Aluminum Cladding and Curtain Wall of a Sports Club

The paper discusses the design, fabrication and the execution of the cladding supported by steel trusses and curtain wall of a sports club. The cladding and the curtain walls were subjected to a wind load of 1.2 Kpa considering basic wind speed of 25 m/s as per the project specifications. The first part of the paper deals with the cladding work of the canopy that consist of a 4 mm thick aluminium composite panels supported by steel trusses extended from the main structure. Two types of steel trusses were provided, the main truss connected to the space truss, whereas the intermediate truss connected to channels. Both trusses were spaced at 2.5 m centre to centre. These trusses were fabricated at factory and transported to the site for installation. The second part of the paper is related to the curtain wall design having Maximum Mullion spacing of 2 m, considered as worst scenario for the design calculations. The maximum Mullion height was 5.55 m, adopted in the calculations with bottom and top pinned connection. The Technal system was adopted for the design of mullions and transoms. Design was carried out using numerical modeling with CSI SAP2000 for cladding and its supporting structures. The bracket was realized and checked for the corresponding induced forces. All the structural systems were found safe according to different acceptance criterion.

Computer-Aided Design and Fabrication of Finger Prosthesis

Custom-made esthetic finger prostheses, which are used for rehabilitation of patients with missing or impaired fingers, have been fabricated manually. However, such fabrication is time-consuming and requires manual skill. Here we propose a computer-aided method for fabricating finger pros-theses to save time and allow fabrications that do not require considerable manual skill. In this method, the dimensions of a patient’s healthy finger on the contralateral hand are first measured using a caliper. Using these dimensions, a three-dimensional model is constructed for fabricating a prosthesis for the patient’s impaired finger. Using the 3D model, a mold is designed using 3D modeling tools and a computer-aided design system. The resulting mold is then fabricated using a 3D printer. A finger prosthesis is fabricated by pouring silicone resin into the mold. A finger prosthesis for a volunteer was experimentally fabricated according to the proposed method. To evaluate the size and shape of the finger prosthesis, the difference between the finger prosthesis and the original finger of the volunteer was analyzed. Because the average difference between them was 0.25 mm, it was concluded that the proposed method could be used to fabricate a finger prosthesis of adequate size and shape.