Individual consistency in spatiotemporal characteristics of migratory Whimbrels in the East Asian-Australasian Flyway

Many migratory birds exhibit interannual consistency in migration schedules,routes and stopover sites.Detecting the interannual consistency in spatiotemporal characteristics helps understand the maintenance of migration and enables the implementation of targeted conservation measures.We tracked the migration of Whimbrel(Numenius phaeopus)in the East Asian-Australasian Flyway and collected spatiotemporal data from individuals that were tracked for at least two years.Wilcoxon non-parametric tests were used to compare the interannual variations in the dates of departure from and arrival at breeding/nonbreeding sites,and the inter-annual variation in the longitudes when the same individual across the same latitudes.Whimbrels exhibited a high degree of consistency in the use of breeding,nonbreeding,and stopover sites between years.The variation of arrival dates at nonbreeding sites was significantly larger than that of the departure dates from nonbreeding and breeding sites.Repeatedly used stopover sites by the same individuals in multiple years were concentrated in the Yellow Sea coast during northward migration,but were more widespread during southward migration.The stopover duration at repeatedly used sites was significantly longer than that at sites used only once.When flying across the Yellow Sea,Whimbrels breeding in Sakha(Yakutia)exhibited the highest consistency in migration routes in both autumn and spring.Moreover,the consistency in migration routes of Yakutia breeding birds was generally higher than that of birds breeding in Chukotka.Our results suggest that the northward migration schedule of the Whimbrels is mainly controlled by endogenous factors,while the southward migration schedule is less affected by endogenous factors.The repeated use of stopover sites in the Yellow Sea coast suggests this region is important for the migration of Whimbrel,and thus has high conservation value.

Differentiating consistency of meningioma based on grey-level histogram analysis of T2WI

Objective To observe the value of grey-level histogram analysis based on T2WI for differentiating consistency of meningioma.Methods Data of 109 patients with meningioma were retrospectively analyzed.The patients were divided into hard group(n=71)and soft group(n=38)according to the consistency of tumors.Tumor ROI was outlined on axial T2WI showing the largest tumor section,gray levels were extracted and histogram analysis was performed.The value of each histogram parameter were compared between groups.Then receiver operating characteristic curve was drawn,and the area under the curve(AUC)was calculated to evaluate the efficiency for differentiating soft and hard meningioma.Results P 1,P 10,P 50,P 90,P 99 and the mean grey levels on T2WI in soft group were all higher than those in hard group(all P<0.05),while the variance,the kurtosis and the skewness were not significantly different between groups(all P>0.05).The differentiating efficiency of P 1,P 10,P 50,P 90,P 99 and the mean grey levels on T2WI were all fine,with AUC of 0.774 to 0.833,and no significant difference was found(all P>0.05).Conclusion Parameters of grey-level histogram analysis such as P 1,P 10,P 50,P 90,P 99 and the mean values based on T2WI were all valuable for differentiating soft and hard meningioma.

Cross-Modal Consistency with Aesthetic Similarity for Multimodal False Information Detection

With the explosive growth of false information on social media platforms, the automatic detection of multimodalfalse information has received increasing attention. Recent research has significantly contributed to multimodalinformation exchange and fusion, with many methods attempting to integrate unimodal features to generatemultimodal news representations. However, they still need to fully explore the hierarchical and complex semanticcorrelations between different modal contents, severely limiting their performance detecting multimodal falseinformation. This work proposes a two-stage detection framework for multimodal false information detection,called ASMFD, which is based on image aesthetic similarity to segment and explores the consistency andinconsistency features of images and texts. Specifically, we first use the Contrastive Language-Image Pre-training(CLIP) model to learn the relationship between text and images through label awareness and train an imageaesthetic attribute scorer using an aesthetic attribute dataset. Then, we calculate the aesthetic similarity betweenthe image and related images and use this similarity as a threshold to divide the multimodal correlation matrixinto consistency and inconsistencymatrices. Finally, the fusionmodule is designed to identify essential features fordetectingmultimodal false information. In extensive experiments on four datasets, the performance of the ASMFDis superior to state-of-the-art baseline methods.

Decoding the inconsistency of six cropland maps in China

Accurate cropland information is critical for agricultural planning and production,especially in foodstressed countries like China.Although widely used medium-to-high-resolution satellite-based cropland maps have been developed from various remotely sensed data sources over the past few decades,considerable discrepancies exist among these products both in total area and in spatial distribution of croplands,impeding further applications of these datasets.The factors influencing their inconsistency are also unknown.In this study,we evaluated the consistency and accuracy of six cropland maps widely used in China in circa 2020,including three state-of-the-art 10-m products(i.e.,Google Dynamic World,ESRI Land Cover,and ESA WorldCover)and three 30-m ones(i.e.,GLC_FCS30,GlobeLand 30,and CLCD).We also investigated the effects of landscape fragmentation,climate,and agricultural management.Validation using a ground-truth sample revealed that the 10-m-resolution WorldCover provided the highest accuracy(92.3%).These maps collectively overestimated Chinese cropland area by up to 56%.Up to 37%of the land showed spatial inconsistency among the maps,concentrated mainly in mountainous regions and attributed to the varying accuracy of cropland maps,cropland fragmentation and management practices such as irrigation.Our work shed light on the promotion of future cropland mapping efforts,especially in highly inconsistent regions.

Identifying Brand Consistency by Product Differentiation Using CNN

This paper presents a new method of using a convolutional neural network(CNN)in machine learning to identify brand consistency by product appearance variation.In Experiment 1,we collected fifty mouse devices from the past thirty-five years from a renowned company to build a dataset consisting of product pictures with pre-defined design features of their appearance and functions.Results show that it is a challenge to distinguish periods for the subtle evolution of themouse devices with such traditionalmethods as time series analysis and principal component analysis(PCA).In Experiment 2,we applied deep learning to predict the extent to which the product appearance variation ofmouse devices of various brands.The investigation collected 6,042 images ofmouse devices and divided theminto the Early Stage and the Late Stage.Results show the highest accuracy of 81.4%with the CNNmodel,and the evaluation score of brand style consistency is 0.36,implying that the brand consistency score converted by the CNN accuracy rate is not always perfect in the real world.The relationship between product appearance variation,brand style consistency,and evaluation score is beneficial for predicting new product styles and future product style roadmaps.In addition,the CNN heat maps highlight the critical areas of design features of different styles,providing alternative clues related to the blurred boundary.The study provides insights into practical problems for designers,manufacturers,and marketers in product design.It not only contributes to the scientific understanding of design development,but also provides industry professionals with practical tools and methods to improve the design process and maintain brand consistency.Designers can use these techniques to find features that influence brand style.Then,capture these features as innovative design elements and maintain core brand values.

Optimization of Quality Consistency Problem of Electromechanical Component due to Manufacturing Uncertainties with a Novel Tolerance Design Method

The consistency problem caused by uncertainties in manufacturing process is a significant factor influencing the quality of electromechanical components. Currently, there are two approaches for reducing the influence of uncertainties. The first one is to improve the resistance capability of design scheme by using robust parameter design( RPD) method with nonlinear feature of controllable factors. The second one is to control the influence of uncertainties by using robust tolerance design( RTD) method with quality loss function,setting the optimal tolerance with the minimum total product loss as the objective. However, as for the electromechanical component, it is difficult to achieve nonlinear region owing to the restrictions of design parameters. In addition,the establishment of cost function in manufacturing process is also confronted by practical difficulties. In order to solve the quality consistency problem under the influence of manufacturing uncertainties,a novel tolerance design method was proposed for the electromechanical components. Through the experiment design and contribution rate analysis, key factors influencing the quality consistency were determined,and the tolerance allocation scheme was confirmed according to the consistency objective of quality.Then, quality distribution characteristics before and after the consistency optimization were analyzed and verified through the Monte Carlo stochastic simulation. The application result of electromagnetic relay proves the effectiveness of the method proposed in this paper.

Strong Consistency of Estimators of a Semiparametric Regression Model under Fixed Design

In this paper, we consider the following semipaxametric regression model under fixed design： yi = xi′β＋g（xi）＋ei. The estimators of β, g（·） and σ^2 axe obtained by using the least squares and usual nonparametric weight function method and their strong consistency is proved under the suitable conditions.

Study of prestack elastic parameter consistency inversion methods

The three parameters of P-wave velocity, S-wave velocity, and density have remarkable differences in conventional prestack inversion accuracy, so study of the consistency inversion of the ＂three parameters＂ is very important. In this paper, we present a new inversion algorithm and approach based on the in-depth analysis of the causes in their accuracy differences. With this new method, the inversion accuracy of the three parameters is improved synchronously by reasonable approximations and mutual constraint among the parameters. Theoretical model calculations and actual data applications with this method indicate that the three elastic parameters all have high inversion accuracy and maintain consistency, which also coincides with the theoretical model and actual data. This method has good application prospects.

Rheological properties of low consistency TMP from thinning wood of Chinese Fir

The rheological behavior of low consistency thermomechanical pulp of Chinese fir harvested by intermediate thinning was analyzed. The results show that the apparent viscosity of pulp changed along with the beating degree, pulp consistency and shearing velocity. With the increasing of pulp consistency, the apparent viscosity of pulp increased gradually. Beating degree of pulp had an effect on microstructure of pulp. The apparent viscosity of pulp declined as beating degree of pulp increased, and the apparent viscosity of pulp fell along with the shearing velocity increasing. Based on the results, the rheological models are set up. The models showed that the fluid types of the low consistency pulp could be described as pseudoplastics fluids （non-Newtonian fluids）.

Consistency of Water Production Function Models of Two Crops

On basis of test information, the research performed analysis on water production function models of two crops, which indicated that water model of crops in whole growth stage and water model of crops indifferent growth stages have consistency as well as differences, providing references for optimization of irrigation water. Meanwhile, the research analyzed the deficiency of optimization on irrigation water for crops just by Jensen model.

水田动力底盘逆向建模与质心验证——基于Geomagic Design X

针对目前农业机械仿真和优化模型精度不高的问题,提出了一种构建精确模型的逆向建模方法。应用光学扫描仪采集点云数据,基于Geomagic Design X处理点云数据并重构零部件模型,在SolidWorks中完成水田动力底盘的装配。以VP6D-CQ型水田动力底盘为例,将测得的实际质心位置与所建的模型质心位置进行比较,并对提出的逆向建模方法进行了试验验证以及误差分析。结果表明:总质量、x坐标、y坐标、z坐标的误差值分别为4.55%、3.62%、2.23%、4.81%,误差值均在5%内。此方法可构建准确的三维模型,为后续仿真优化数据精确性奠定了基础,与传统的研发相比较,可缩短农业机械研发周期、降低设计成本。

App Designer辅助教学方法探索与实践——以软件无线电课程为例

软件无线电作为通信学科的必修课程,具有承上启下的重要作用。因课程原理抽象、理论公式复杂,学员在学习过程存在理解掌握难、实践应用难等问题。通过对当前软件无线电教学过程中存在的不足与困难进行分析,提出利用MATLAB App Designer辅助课程教学,从教学准备、课堂互动、自主实验、反馈提升四个方面开展课程教学改革。实践表明,该方法对于提升学员的工程思维、系统思维具有显著效果,同时可以增强学员理论联系实际的能力。

The Consistency Characterizations of Correlated Equilibria for Games in Strategic Form

１９９３年，Ｂ．Ｐｅｌｅｇ和Ｓ．Ｔｉｊｓ两位教授使用两种一致性公理系统分别对策略式对策的Ｎａｓｈ平衡做了公理化的描述．

CONSISTENCY OF LS ESTIMATOR IN SIMPLE LINEAR EV REGRESSION MODELS

Consistency of LS estimate of simple linear EV model is studied. It is shown that under some common assumptions of the model, both weak and strong consistency of the estimate are equivalent but it is not so for quadratic-mean consistency.

CONSISTENCY OF MLE OF THE PARAMETER OF EXPONENTIAL LIFETIME DISTRIBUTION FOR RANDOM CENSORING MODEL WITH INCOMPLETE INFORMATION

In this paper, we have discussed a random censoring test with incomplete information, and proved that the maximum likelihood estimator(MLE) of the parameter based on the randomly censored data with incomplete information in the case of the exponential distribution has the strong consistency.

TWO APPROACHES TO IMPROVING THE CONSISTENCY OF COMPLEMENTARY JUDGEMENT MATRIX

By the transformation relations between complementary judgement matrix and recip- rocal judgement matrix,this paper proposes two methods for improving the consistency of com- plementary judgement matrix and gives two simple practical iterative algorithms.These two al- gorithms are easy to implementon computer,and the modified complementary judgementmatri- ces remain most information that original matrix contains.Thus the methods supplement and develop the theory and methodology for improving consistency of complementary judgement matrix

THE CONSISTENCY AND ASYMPTOTIC NORMALITY OF NEAREST NEIGHBOR DENSITY ESTIMATOR UNDER α-MIXING CONDITION

We investigate the consistency and asymptotic normality of nearest-neighbor density estimator of a sample data process based on α-mixing assumption. We extend the correspondent result under independent identical cases.

On consistency of the weighted arithmetical mean complex judgement matrix

The weighted arithmetical mean complex judgement matrix （WAMCJM） is the most common method for aggregating group opinions, but it has a shortcoming, namely the WAMCJM of the perfectly consistent judgement matrices given by experts canot guarantee its perfect consistency. An upper bound of the WAMCJM＇s consistency is presented. Simultaneously, a compatibility index of judging the aggregating extent of group opinions is also introduced. The WAMCJM is of acceptable consistency and is proved provided the compatibilities of all judgement matrices given by experts are smaller than the threshold value of acceptable consistency. These conclusions are important to group decision making.

Image segmentation by level set evolution with region consistency constraint

Image segmentation is a key and fundamental problem in image processing,computer graphics,and computer vision.Level set based method for image segmentation is used widely for its topology flexibility and proper mathematical formulation.However,poor performance of existing level set models on noisy images and weak boundary limit its application in image segmentation.In this paper,we present a region consistency constraint term to measure the regional consistency on both sides of the boundary,this term defines the boundary of the image within a range,and hence increases the stability of the level set model.The term can make existing level set models significantly improve the efficiency of the algorithms on segmenting images with noise and weak boundary.Furthermore,this constraint term can make edge-based level set model overcome the defect of sensitivity to the initial contour.The experimental results show that our algorithm is efficient for image segmentation and outperform the existing state-of-art methods regarding images with noise and weak boundary.

Consistency check of degradation mechanism between natural storage and enhancement test for missile servo system

Reliability enhancement testing(RET) is an accelerated testing which hastens the performance degradation process to surface its inherent defects of design and manufacture. It is an important hypothesis that the degradation mechanism of the RET is the same as the one of the normal stress condition. In order to check the consistency of two mechanisms, we conduct two enhancement tests with a missile servo system as an object of the study, and preprocess two sets of test data to establish the accelerated degradation models regarding the temperature change rate that is assumed to be the main applied stress of the servo system during the natural storage. Based on the accelerated degradation models and natural storage profile of the servo system, we provide and demonstrate a procedure to check the consistency of two mechanisms by checking the correlation and difference of two sets of degradation data. The results indicate that the two degradation mechanisms are significantly consistent with each other.