ESTIMATION OF ACTIVATED ENERGY OF DESORPTION OF n-HEXANE ON ACTIVATED CARBONS BY TPD TECHNIQUE

In this paper, six kinds of activated carbons such as Ag+-activated carbon, Cu2+- activated carbon, Fe3+- activated carbon, activated carbon, Ba2+- activated carbon and Ca2+- activated carbon were prepared. The model for estimating activated energy of desorption was established. Temperature-programmed desorption (TPD) experiments were conducted to measure the TPD curves of n-hexanol and then estimate the activation energy for desorption of n-hexanol on the activated carbons. Results showed that the activation energy for the desorption of n-hexanol on the Ag+- activated carbon, the Cu2+- activated carbon and the Fe3+- activated carbon were higher than those of n-hexanol on the activated carbon, the Ca2+- activated carbon and the Ba2+- activated carbon.

ACTIVATION ENERGY OF DESORPTION OF DIBENZOFURAN ON ACTIVATED CARBONS

Three kinds of commercial activated carbons, such as Norit RB1, Monolith and Chemviron activated carbons, were used as adsorbents for adsorption of dibenzofuran. The average pore size and specific surface area of these activated carbons were measured. Temperature Programmed Desorption (TPD) experiments were conducted to measure the TPD curves of dibenzofuran on the activated carbons, and then the activation energy for desorption of dibenzofuran on the activated carbons was estimated. The results showed that the Chemviron and the Norit RB1 activated carbon maintained higher specific surface area and larger micropore pore volume in comparison with the Monolith activated carbon, and the activation energy for the desorption of dibenzofuran on these two activated carbons was higher than that on the Monolith activated carbon. The smaller the pore of the activated carbon was, the higher the activated energy of dibenzofuran desorption was.

Effect of Relative Humidity on Adsorption of Formaldehyde on Modified Activated Carbons

This work mainly involves the study of effect of relative humidity on adsorption of formaldehyde on the activated carbons modified with organosilane solution. Modification of activated carbons was carded out by impregnating activated carbon with organosilane/methanol-containing solutions. The breakthrough curves of formaldehyde in the packed beds of original and modified activated carbons were measured, respectively, at relative humidity of 30%, 60%, and 80%. Temperature-programmed desorption （TPD） experiments were used to estimate the activation energy for desorption of formaldehyde from the activated carbon. Results showed that the relative humidity had strongly influence on breakthrough curves of formaldehyde in the packed beds. The higher the relative humidity of gas mixtures through the packed beds was, the smaller the breakthrough time of formaldehyde became. The use of organosilane compounds to modify surfaces of the activated carbon can enhance the interaction between formaldehyde and the surfaces, and as a result, the breakthrough times of formaldehyde in the packed beds of the modified activated carbon were longer than that in the packed bed of the unmodified activated carbon.

New Activated Carbon with High Thermal Conductivity and Its Microwave Regeneration Performance

Using a walnut shellas a carbon source and ZnCl_2 as an activating agent,we resolved the temperature gradient problems of activated carbon in the microwave desorption process.An appropriate amount of silicon carbide was added to prepare the composite activated carbon with high thermalconductivity while developing VOC adsorption-microwave regeneration technology.The experimentalresults show that the coefficient of thermalconductivity of SiC-AC is three times as much as those of AC and SY-6.When microwave power was 480 W in its microwave desorption,the temperature of the bed thermaldesorption was 10 ℃ to 30 ℃ below that of normalactivated carbon prepared in our laboratory.The toluene desorption activation energy was 16.05 k J·mol^（-1）,which was 15% less than the desorption activation energy of commercialactivated carbon.This study testified that the process could maintain its high adsorption and regeneration desorption performances.

Adsorption Breakthrough of Benzene in the Fixed Bed of Modified Activated Carbon under Different Humidity Conditions

The breakthrough curves of benzene and water on modified activated carbons（ACs） were investigated.Temperature-programmed desorption（TPD） experiments were conducted to measure the TPD curves of benzene and water on modified and unmodified ACs and to estimate the activation energy for the desorption of benzene on the modified ACs.Starting with unmodified ACs,two modified ACs were prepared by using two different types of silane,designated by KH560 and 1706.The results showed that the activation energy for the desorption of benzene on KH560/AC and 1706/AC was higher than that on unmodified AC.In addition,the activation energy for the desorption of water on KH560/AC and 1706/AC was lower than that on unmodified AC.The breakthrough curves of benzene obtained from the experimental observations under different humidity conditions were compared with the results of the TPD experiments.The results show that the modified ACs are less affected by water,whereas the unmodified ACs are more affected by water,indicating that surface modification by organosilane compounds can improve the adsorption of benzene on the activated carbo,which weakens the adsorption of water.

Effect of textural property of coconut shell-based activated carbon on desorption activation energy of benzothiophene

In this work,the effect of the textural property of activated carbons on desorption activation energy and adsorption capacity for benzothiophene(BT)was investigated.BET surface areas and the textural parameters of three kinds of the activated carbons,namely SY-6,SY-13 and SY-19,were measured with an ASAP 2010 instrument.The desorption activation energies of BT on the activated carbons were determined by temperature-programmed desorption(TPD).Static adsorption experiments were carried out to determine the isotherms of BT on the activated carbons.The influence of the textural property of the activated carbons on desorption activation energy and the adsorption capacity for BT was discussed.Results showed that the BET surface areas of the activated carbons,SY-6,SY-13 and SY-19 were 1106,1070 and 689 m2·g^(-1),respectively,and their average pore diameters were 1.96,2.58 and 2.16 nm,respectively.The TPD results indicated that the desorption activation energy of BT on the activated carbons,SY-6,SY-19 and SY-13 were 58.84,53.02 and 42.57 KJ/mol,respectively.The isotherms showed that the amount of BT adsorbed on the activated carbons followed the order of SY-6>SY-19>SY-13.The smaller the average pore diameter of the activated carbon,the stronger its adsorption for BT and the higher the activation energy required for BT desorption on its surface.The Freundlich adsorption isotherm model can be properly used to formulate the adsorption behavior of BT on the activated carbons.

INVESTIGATION OF THE INTERACTIONS BETWEEN WATER AND MODIFIED SILICA GEL BY IGC AND TPD

In this work, the thermodynamic parameters for the adsorption of water vapor on untreated silica gel and silica gel treated with hygroscopic salts and silane coupling agent were determined by lnverse Gas Chromatography （IGC） in the infinite dilution region. The desorption activation energies of the water vapor on virgin and modified silica gels were estimated by using the Temperature Programmed Desorption （TPD） technique. The interactions between the water and the virgin and modified silica gels were discussed. Results showed that the thermodynamic parameters and desorption activation energy of water vapour on the silica gels increase with decreasing pore size and increasing the surface hydrophilic properties. The desorption activation energy of virgin and modified silica gels was found to increase with increasing the thermodynamic parameters. The larger the adsorption parameters and the desorption activation energy were, the interactions between water and virgin and modified silica gels were.