Probes into a new and effective method in arranging the powerhouses of tank & armored vehicles. Theory and method of 3-dimensional rectangular packing are adapted to arrange effectively almost all the systems and ...Probes into a new and effective method in arranging the powerhouses of tank & armored vehicles. Theory and method of 3-dimensional rectangular packing are adapted to arrange effectively almost all the systems and components in the powerhouse of the vehicle, thus the study can be regarded as an attempt for the theory's engineering applications in the field of tank & armored vehicle design. It is proved that most parts of the solutions attained are reasonable, and some of the solutions are innovative.展开更多
To automatically detect oil tanks in polarimetric synthetic aperture radar（SAR） images, a coastal oil tank detection method is proposed based on recognition of T-shaped harbor. First of all, the T-shaped harbor is d...To automatically detect oil tanks in polarimetric synthetic aperture radar（SAR） images, a coastal oil tank detection method is proposed based on recognition of T-shaped harbor. First of all, the T-shaped harbor is detected to locate the region of interest（ROI） of oil tanks. Then all suspicious targets in the ROI are extracted by the segmentation of strong scattering targets and the classifier of H/α. The template targets are selected from the suspicious targets by the combination of a proposed circular degree parameter and the similarity parameter（SP） of the polarimetric coherency matrix. Finally, oil tanks are detected according to the statistics of the similarity parameter between each suspicious target and template targets in ROI. Polarimetric SAR data acquired by RADARSAT-2 over Berkeley and Singapore areas are used for testing. Experiment results show that most of the targets are correctly detected and the overall detection rate is close to 80%.The false rate is effectively reduced by the proposed algorithm compared with the method without T-shaped harbor recognition.展开更多
Liquid leak detection may represent a challenge for Oil&Gas operators,as indicated by operational feed-back and independent studies.Despite the availability of many different leak detection technologies,some syste...Liquid leak detection may represent a challenge for Oil&Gas operators,as indicated by operational feed-back and independent studies.Despite the availability of many different leak detection technologies,some systems may either fail to detect spills or generate frequent false alarms.In particular,possible soil contamination from pre-existing leaks and pollution carry-over by rain water is difficult to filter out by a leak sensing system.Typical case of false alarms relates to punctual sensors installed upstream the drain valve within the storage tank bunds,monitoring possible presence of leaks in rain water.Besides old soil contamination,other criteria should also be considered when selecting a spill detection technology,such as asset type to be monitored(storage tank,pipeline,…),system accuracy(minimum detectable quantity,ability to localize the leak),detection time,reliability over time,capital,installation and operating costs.The paper will include an evaluation of different external leak detection technologies with respect to the above-mentioned criteria,pointing out the capabilities and limitations of each system.Focus will be placed on reliability of leak monitoring systems in challenging environments.A new generation of digital,reusable sensing cables and probes,as well as the impact of sensitivity for different applications,will be discussed.Since leak sensor installation environment(positioning,adoption of special precautions,…)may significantly affect the system performance,different above ground and underground configurations will be presented,both for new builds and existing facilities.展开更多
盲自适应多用户检测器只需知道期望用户的扩频码及定时信息 ,就可以实现对多址干扰的有效抑制。本文提出了一种基于 TH ( Tank and Hopfield)神经网络的盲多用户检测器 ,通过采用 TH神经网络来计算检测器的最优权值 ,从而提高了检测器...盲自适应多用户检测器只需知道期望用户的扩频码及定时信息 ,就可以实现对多址干扰的有效抑制。本文提出了一种基于 TH ( Tank and Hopfield)神经网络的盲多用户检测器 ,通过采用 TH神经网络来计算检测器的最优权值 ,从而提高了检测器的收敛速度。仿真实验的结果表明这一方法具有良好的多址干扰抑制能力。展开更多
Currently,the measurement methods for pneumatic system leakage include bubbling,ultrasonic,and pressure detection methods.These methods are sensitive to high-precision sensors,long detection times,and stable external ...Currently,the measurement methods for pneumatic system leakage include bubbling,ultrasonic,and pressure detection methods.These methods are sensitive to high-precision sensors,long detection times,and stable external environments.The traditional differential pressure method involves severe differential pressure fluctuations caused by environmental pressure fluctuations or electromagnetic noise interference of sensors,leading to inaccurate detection.In this paper,a differential pressure fitting method for an asymmetric differential pressure cylinder is proposed.It overcomes the limitation of the detection efficiency caused by the asynchronous temperature recovery of the two chambers in the asymmetric differential pressure method and uses the differential pressure substitution equation to replace the differential calculation of the differential pressure.The improved differential pressure method proposes an innovation based on the detection principle and calculation method.Additionally,the influence of the parameters in the differential pressure substitution equation on the leakage calculation results was simulated,and the specific physical significance of the parameters of the differential pressure substitution equation was explained.The experiments verified the fitting effect and proved the accuracy of this method.Compared with the traditional differential pressure method,the maximum leakage deviation of inhibition was 0.5 L/min.Therefore,this method can be used to detect leaks in air tanks.展开更多
基金Sponsored by the National Natural Science Foundation of China under Grant( 50335040).
文摘Probes into a new and effective method in arranging the powerhouses of tank & armored vehicles. Theory and method of 3-dimensional rectangular packing are adapted to arrange effectively almost all the systems and components in the powerhouse of the vehicle, thus the study can be regarded as an attempt for the theory's engineering applications in the field of tank & armored vehicle design. It is proved that most parts of the solutions attained are reasonable, and some of the solutions are innovative.
基金supported by the National Key R&D Program of China(2017YFB0502700)the National Natural Science Foundation of China(61490693+3 种基金61771043)the High-Resolution Earth Observation Systems(41-Y20A14-9001-15/1630-Y20A12-9004-15/1630-Y20A10-9001-15/16)
文摘To automatically detect oil tanks in polarimetric synthetic aperture radar（SAR） images, a coastal oil tank detection method is proposed based on recognition of T-shaped harbor. First of all, the T-shaped harbor is detected to locate the region of interest（ROI） of oil tanks. Then all suspicious targets in the ROI are extracted by the segmentation of strong scattering targets and the classifier of H/α. The template targets are selected from the suspicious targets by the combination of a proposed circular degree parameter and the similarity parameter（SP） of the polarimetric coherency matrix. Finally, oil tanks are detected according to the statistics of the similarity parameter between each suspicious target and template targets in ROI. Polarimetric SAR data acquired by RADARSAT-2 over Berkeley and Singapore areas are used for testing. Experiment results show that most of the targets are correctly detected and the overall detection rate is close to 80%.The false rate is effectively reduced by the proposed algorithm compared with the method without T-shaped harbor recognition.
文摘Liquid leak detection may represent a challenge for Oil&Gas operators,as indicated by operational feed-back and independent studies.Despite the availability of many different leak detection technologies,some systems may either fail to detect spills or generate frequent false alarms.In particular,possible soil contamination from pre-existing leaks and pollution carry-over by rain water is difficult to filter out by a leak sensing system.Typical case of false alarms relates to punctual sensors installed upstream the drain valve within the storage tank bunds,monitoring possible presence of leaks in rain water.Besides old soil contamination,other criteria should also be considered when selecting a spill detection technology,such as asset type to be monitored(storage tank,pipeline,…),system accuracy(minimum detectable quantity,ability to localize the leak),detection time,reliability over time,capital,installation and operating costs.The paper will include an evaluation of different external leak detection technologies with respect to the above-mentioned criteria,pointing out the capabilities and limitations of each system.Focus will be placed on reliability of leak monitoring systems in challenging environments.A new generation of digital,reusable sensing cables and probes,as well as the impact of sensitivity for different applications,will be discussed.Since leak sensor installation environment(positioning,adoption of special precautions,…)may significantly affect the system performance,different above ground and underground configurations will be presented,both for new builds and existing facilities.
文摘盲自适应多用户检测器只需知道期望用户的扩频码及定时信息 ,就可以实现对多址干扰的有效抑制。本文提出了一种基于 TH ( Tank and Hopfield)神经网络的盲多用户检测器 ,通过采用 TH神经网络来计算检测器的最优权值 ,从而提高了检测器的收敛速度。仿真实验的结果表明这一方法具有良好的多址干扰抑制能力。
基金Supported by the Youth Fund of National Natural Science Foundation of China(Grant No.52105044)National Key R&D Program of China(Grant No.2019YFC0121702)National Key R&D Program of China(Grant No.2019YFC0121703).
文摘Currently,the measurement methods for pneumatic system leakage include bubbling,ultrasonic,and pressure detection methods.These methods are sensitive to high-precision sensors,long detection times,and stable external environments.The traditional differential pressure method involves severe differential pressure fluctuations caused by environmental pressure fluctuations or electromagnetic noise interference of sensors,leading to inaccurate detection.In this paper,a differential pressure fitting method for an asymmetric differential pressure cylinder is proposed.It overcomes the limitation of the detection efficiency caused by the asynchronous temperature recovery of the two chambers in the asymmetric differential pressure method and uses the differential pressure substitution equation to replace the differential calculation of the differential pressure.The improved differential pressure method proposes an innovation based on the detection principle and calculation method.Additionally,the influence of the parameters in the differential pressure substitution equation on the leakage calculation results was simulated,and the specific physical significance of the parameters of the differential pressure substitution equation was explained.The experiments verified the fitting effect and proved the accuracy of this method.Compared with the traditional differential pressure method,the maximum leakage deviation of inhibition was 0.5 L/min.Therefore,this method can be used to detect leaks in air tanks.
