A parametric model of cutting temperature generated in end milling process is developed according to the thermal mechanism of end milling as an intermittent operation, which periodically repeats the cycle of heating u...A parametric model of cutting temperature generated in end milling process is developed according to the thermal mechanism of end milling as an intermittent operation, which periodically repeats the cycle of heating under cutting and cooling under non-cutting. It shows that cutting speed and the tool-workpiece engagement condition are determinative for tool temperature in the operation. The suggested model was investigated by tests of AlTiN coated endmill machining hardened die steel JIS SKD61, where cutting temperature on the flank face of tool was measured with an optical fiber type radiation thermometer. Experimental results show that the tendency of cutting temperature to increase with cutting speed and engagement angle is intensified with the progressing tool wear.展开更多
Facing the challenges of a shorter product design a nd manufacturing lead-time, many mold companies are using 3-D CAD/CAM software s ystems in design and manufacturing. A new product file is often issued to the mo ld ...Facing the challenges of a shorter product design a nd manufacturing lead-time, many mold companies are using 3-D CAD/CAM software s ystems in design and manufacturing. A new product file is often issued to the mo ld design department before it is completely finalized and the design may have t o be iterated many times during the mold design and making processes. In practic e, if a mold has been modified, all the tool paths that cover the modified regio n must be re-generated, no matter how small the modified region may be. With th e available tool path generation systems, if a tool path needs to be re-generat ed, all the cutter location (CL) points must be re-calculated, and none of the original CL points can be re-used. It would require as much time to re-gen erate the modified tool path as in the original case. On the other hand, the mod ified region is usually quite small compared with the entire mold. The complete re-generation process is therefore highly unproductive and time-consuming. This paper proposes an efficient tool path re-generation approach for 3-axis d ie and mold machining. It is assumed in this research that a gouge-free too l path has been generated for the original mold and the same ball end-mill is to be used to generate the tool path for the modified mold. It is shown in th is work that if the boundary of the modified region is interference-free, the a ffected CL points are enclosed by a set of CL points which correspond to the poi nts on the boundary of the modified region. An efficient tool path re-generatio n algorithm was developed in this research. With this algorithm, a closed CL cur ve is first generated from the boundary of the affected region. The CL points fo r the original mold are then analyzed by comparing the x and y values with the b oundary of the affected CL points. If the CL points are not affected by the modi fication, they are output to the new CL file directly. Otherwise, they are remov ed and replaced by the new CL points. The algorithm has been tested using severa l industrial parts, and results show that it is efficient, robust, and the re-g enerated tool path is gouge-free and smooth.展开更多
An approach was presented to characterize the stress response of workpiece in hard machining, accounting for the effect of the initial workpiece hardness in addition to temperature, strain and strain rate on flow stre...An approach was presented to characterize the stress response of workpiece in hard machining, accounting for the effect of the initial workpiece hardness in addition to temperature, strain and strain rate on flow stress in this paper. AISI H13 die steel was chosen to verify this methodology. The proposed flow stress model demonstrates a good agreement with experimental data. Therefore, the proposed model can be used to predict the corresponding flow stress-strain response ofAISl H13 die steel with variation of the initial workpiece hardness in hard machining.展开更多
Micro prism film used in LCD industry can be manufactured by roll to roll method with copper-plated roll mold. As copper-plated roll mold is getting larger, pitch error is getting severer. The pitch error drops the qu...Micro prism film used in LCD industry can be manufactured by roll to roll method with copper-plated roll mold. As copper-plated roll mold is getting larger, pitch error is getting severer. The pitch error drops the quality of micro prism film. The main cause of the pitch error was investigated during machining large roll mold whose machined length was 1 200 mm. The temperature of machining system was elevated during machining roll mold, and this elevation induced thermal expansion of the system. The temperature variation around the roll mold also made thermal expansion of the roll mold. The amount of thermal expansion had strong relationship to the amount of pitch error. Therefore, the roll mold was machined after warming-up of machining system and precise temperature controller around copper-plated roll mold was installed, which minimized the temperature variation. Finally, precise micro prism patterns without pitch error were machined on the large roll mold.展开更多
The current development of precision plastic injection molding machines mainly focuses on how to save material and improve precision, but the two aims contradict each other. For a clamp unit, clamping precision improv...The current development of precision plastic injection molding machines mainly focuses on how to save material and improve precision, but the two aims contradict each other. For a clamp unit, clamping precision improving depends on the design quality of the stationary platen. Compared with the parametric design of stationary platen, structural scheme design could obtain the optimization model with double objectives and multi-constraints. In this paper, a SE-160 precision plastic injection molding machine with 1600 kN clamping force is selected as the subject in the case study. During the motion of mold closing and opening, the stationary platen of SE-160 is subjected to a cyclic loading, which would cause the fatigue rupture of the tie bars in periodically long term operations. In order to reduce the deflection of the stationary platen, the FEA method is introduced to optimize the structure of the stationary platen. Firstly, an optimal topology model is established by variable density method. Then, structural topology optimizations of the stationary platen are done with the removable material from 50%, 60% to 70%. Secondly, the other two recommended optimization schemes are given and compared with the original structure. The result of performances comparison shows that the scheme II of the platen is the best one. By choosing the best alternative, the volume and the local maximal stress of the platen could be decreased, corresponding to cost-saving material and better mechanical properties. This paper proposes a structural optimization design scheme, which can save the material as well as improve the clamping precision of the precision plastic injection molding machine.展开更多
A 3-D mathematical model considering turbulence phenomena has been established based on a computational fluid dynamics technique, so called 3-D SOLA-VOF (Solution Algorithm-Volume of Fluid), to simulate the fluid flow...A 3-D mathematical model considering turbulence phenomena has been established based on a computational fluid dynamics technique, so called 3-D SOLA-VOF (Solution Algorithm-Volume of Fluid), to simulate the fluid flow of mold filling process of die casting. In addition, the mathematical model for simulating the heat transfer in die casting process has also been established. The computation program has been developed by the authors with the finite difference method (FDM) recently. As verification, the mold filling process of a S-shaped die casting has been simulated and the simulation results coincide with that of the benchmark test. Finally, as a practical application, the gating design of a motorcycle component was modified by the mold filling simulation and the dies design of another motorcycle component was optimized by the heat transfer simulation. All the optimized designs were verified by the production practice.展开更多
Element parameters including volume filled ratio,surface dimensionless distance,and surface filled ratio for DFDM(direct finite difference method)were proposed to describe shape and location of free surfaces in castin...Element parameters including volume filled ratio,surface dimensionless distance,and surface filled ratio for DFDM(direct finite difference method)were proposed to describe shape and location of free surfaces in casting mold filling processes.A mathematical model of the filling process was proposed specially considering the mass,momentum and heat transfer in the vicinity of free surfaces.Furthermore,a method for gas entrapment was established by tracking flow of entrapped gas.The model and method were applied to practical ADC1 high pressure die castings.The gas entrapment prediction was compared with the fraction and maximum size of porosities in the different casting parts.The comparison shows validity of the proposed model and method.The study indicates that final porosities in high pressure die castings are dependent on both gas entrapment during mold filling process and pressure transfer within solidification period.展开更多
The kinetic characteristics of the clamping unit of plastic injection molding machine that is controlled by close loop with newly developed double speed variable pump unit are investigated. Considering the wide variat...The kinetic characteristics of the clamping unit of plastic injection molding machine that is controlled by close loop with newly developed double speed variable pump unit are investigated. Considering the wide variation of the cylinder equivalent mass caused by the transmission ratio of clamping unit and the severe instantaneous impact force acted on the cylinder during the mold closing and opening process, an adaptive control principle of parameter and structure is proposed to improve its kinetic performance. The adaptive correlation between the acceleration feedback gain and the variable mass is derived. The pressure differential feedback is introduced to improve the dynamic performance in the case of small inertia and heavy impact load. The adaptation of sum pressure to load is used to reduce the energy loss of the system. The research results are verified by the simulation and experiment, The investigation method and the conclusions are also suitable for the differential cylinder system controlled by the traditional servo pump unit.展开更多
This study investigated the relationship between a subject’s evaluation of injection molding machines (IMMs) and formal design features using Kansei engineering. This investigation used 12 word pairs to evaluate the ...This study investigated the relationship between a subject’s evaluation of injection molding machines (IMMs) and formal design features using Kansei engineering. This investigation used 12 word pairs to evaluate the IMM configurations and employed the semantic differential method to explore the perception of 60 interviewees of 12 examples. The relationship between product feature design and corresponding words was derived by multiple regression analysis. Factor analysis reveals that the 12 examples can be categorized as two styles—advanced style and succinct style. For the advanced style, an IMM should use a rectangular form for the clamping-unit cover and a full-cover for the injection-unit. For the succinct style, the IMM configuration should use a beveled form for the safety cover and a vertical rectangular form for the clamping-unit cover. Quantitative data and suggested guidelines for the relationship between design features and interviewee evaluations are useful to product designers when formulating design strategies.展开更多
Fatigue failure is one of the main failure forms of Al-Si-Cu-Mg aluminum alloys.To feature their mechanical aspect of fatigue behavior,the low-cycle fatigue behavior of permanent mold cast and die-cast Al-Si-Cu-Mg all...Fatigue failure is one of the main failure forms of Al-Si-Cu-Mg aluminum alloys.To feature their mechanical aspect of fatigue behavior,the low-cycle fatigue behavior of permanent mold cast and die-cast Al-Si-Cu-Mg alloys at room temperature was investigated.The experimental results show that both permanent mold cast and die-cast Al-Si-Cu-Mg alloys mainly exhibit cyclic strain hardening.At the same total strain amplitude,the die-cast Al-Si-Cu-Mg alloy shows higher cyclic deformation resistance and longer fatigue life than does the permanent mold cast Al-Si-Cu-Mg alloy.The relationship between both elastic and plastic strain amplitudes with reversals to failure shows a monotonic linear behavior,and can be described by the Basquin and Coffin-Manson equations,respectively.展开更多
This paper presents some results of direct observation of mold filling in a specially designed die-casting by X-ray diffraction, including comparison with numerical simulation. Based on such work the authors discuss h...This paper presents some results of direct observation of mold filling in a specially designed die-casting by X-ray diffraction, including comparison with numerical simulation. Based on such work the authors discuss how to prevent gas entrapment and propose new methods.展开更多
Powder injection molding (PIM) and die pressing were employed to fabricate nano-TiN modified Ti(C,N)- based cermets. The shrinkage behavior, microstructure, porosity, and mechanical properties of the samples with ...Powder injection molding (PIM) and die pressing were employed to fabricate nano-TiN modified Ti(C,N)- based cermets. The shrinkage behavior, microstructure, porosity, and mechanical properties of the samples with and without nano-TiN addition fabricated by PIM and die pressing were analyzed. It is demonstrated that for either PIM or die pressing, the porosities are obviously reduced, the mechanical properties are significantly improved after adding nano-TiN, and the hard particles are refined; the rim phase thickness obviously becomes thinner, and the number of dimples in fracture also increases. Compared the samples fabricated by die pressing, it is difficult for PIM to obtain dense Ti(C,N)-based cermets. Due to the too much existence of pores and isolated carbon, the mechanical properties of the sintered samples by PIM are inferior to those of the sintered ones by die pressing.展开更多
The paper discussed cutter-work engagement situation hidden behind the mechanical and thermal load effect on cutting edges during high speed hard machining process. The engagement situation was investigated in great d...The paper discussed cutter-work engagement situation hidden behind the mechanical and thermal load effect on cutting edges during high speed hard machining process. The engagement situation was investigated in great detail using experimental and geometrical analytic measures. Experiments were conducted using A1TiN-coated micro-grain carbide end mill cutters to cut hardened die steel. On the basis, a general high speed hard machining strategy, which aimed at eliminating excessive engagement situation during high-speed machining (HSM) hard machining, was proposed. The strategy includes the procedures to identify prone-to-overload areas where excessive engagement situation occurs and then to create a reliable tool path, which has the effect of cutting load reduction to remove the prone-to-overload areas.展开更多
Computer aided design of heat treatment for AISI P20 mold steel with good machinability is attempted to proceed by the commercial software package Thermo-Calc (TCP+DICTRA). Through experimental and theoretical analysi...Computer aided design of heat treatment for AISI P20 mold steel with good machinability is attempted to proceed by the commercial software package Thermo-Calc (TCP+DICTRA). Through experimental and theoretical analysis of phase transformation during heat treatment, further knowledge of designing proper heat treatment is obtained. Then the machinability of AISI P20+Ni steel under given heat treatment condition is studied and the influencing factors to their machinability are analyzed. It is shown that heat treatment designed by computer simulation of carbide transformation is applicable to AISI P20+Ni steel with good machinability; AISI P20+Ni steel with tempered sorbite treated by quenching & tempering has optimal machinability; normalizing at the temperature of 910°C & tempering can avoid cracking and result in acceptable machinability in small thickness module.展开更多
This paper introduces a new type machine for polyblends with excellent mixing capabilities of internal mixer and continuous molding character of extruder.The machine includes two functions - mixing and extrusion moldi...This paper introduces a new type machine for polyblends with excellent mixing capabilities of internal mixer and continuous molding character of extruder.The machine includes two functions - mixing and extrusion molding that have been composed together by rational design,so a tandem production mode - "batch + continuous" are opened up.The mathematical model of continuous mixing molding was established and verified availably by experimental research.The main physical mechanical property of vulcanizate,which had met national waterproof material standard,verified the machine practicability.The essential difference from other similar type machines is that this machine is not only suitable in producing granular and powder rubbers but also lumpish rubbers.展开更多
This study is based on the modification and development of a two-liter plastic container blow molding machine into a five-liter one provided with a translucent view stripe. This study considers some objectives includi...This study is based on the modification and development of a two-liter plastic container blow molding machine into a five-liter one provided with a translucent view stripe. This study considers some objectives including reducing the total cost, increasing the amount of plastic recovery, and raising the desired plastic materials. Proper designs were prepared and directly applied on spot. Tangible results were obtained. Among others, the modification of some components of the machine, e.g. the extruder, has led to the possible reuse of the milled (recovery) and extra material from the manufacturing processes. That was also conducive to an effective reduction in the cost of production to 50% in some cases. Prior to its modification, this old machine was used to produce polyvinyl chloride (PVC) containers that have become prohibited these days for their damaging effect on man’s life. For now, and after modification, it has become possible to use High Density Polyethylene (HDPE) material, a fact that has improved labor conditions, too.展开更多
Larger and larger proportions of aluminium castings,especially those produced by the die casting process,can be observed during recent years in the automotive industry,house-hold articles and others.In case of the aut...Larger and larger proportions of aluminium castings,especially those produced by the die casting process,can be observed during recent years in the automotive industry,house-hold articles and others.In case of the automotive industry,apart from the traditional elements produced by the die pressure method such as engine blocks or crank shaft bedplates,aluminium is displacing steel from structural parts of cars('body in white').The current state and development directions of the structural solutions of cold-chamber die castings are analysed in this paper.These solutions drive the prospective development of these machines and die casting technology.The focus is mainly on essential functional systems such as:hydraulic drives of closing and locking units,as well as pressing in die machines of known companies present on the European market.展开更多
At the China International Food Packing Machinery Exhibition, the new model die set for PET plastic jet-mouldingmachine developed by the Zhejiang Province Taizhou Municipality Huangyan Sanyou Plastics Factory attracte...At the China International Food Packing Machinery Exhibition, the new model die set for PET plastic jet-mouldingmachine developed by the Zhejiang Province Taizhou Municipality Huangyan Sanyou Plastics Factory attracted the attention of numerous domestic and foreign clients. They rushed to the stand in great numbers for consultation and talks on ordering. According to the evaluation of the experts concerned, the die set is the most advanced one nationwide for PET plastic jet-moulding machinery.展开更多
文摘A parametric model of cutting temperature generated in end milling process is developed according to the thermal mechanism of end milling as an intermittent operation, which periodically repeats the cycle of heating under cutting and cooling under non-cutting. It shows that cutting speed and the tool-workpiece engagement condition are determinative for tool temperature in the operation. The suggested model was investigated by tests of AlTiN coated endmill machining hardened die steel JIS SKD61, where cutting temperature on the flank face of tool was measured with an optical fiber type radiation thermometer. Experimental results show that the tendency of cutting temperature to increase with cutting speed and engagement angle is intensified with the progressing tool wear.
文摘Facing the challenges of a shorter product design a nd manufacturing lead-time, many mold companies are using 3-D CAD/CAM software s ystems in design and manufacturing. A new product file is often issued to the mo ld design department before it is completely finalized and the design may have t o be iterated many times during the mold design and making processes. In practic e, if a mold has been modified, all the tool paths that cover the modified regio n must be re-generated, no matter how small the modified region may be. With th e available tool path generation systems, if a tool path needs to be re-generat ed, all the cutter location (CL) points must be re-calculated, and none of the original CL points can be re-used. It would require as much time to re-gen erate the modified tool path as in the original case. On the other hand, the mod ified region is usually quite small compared with the entire mold. The complete re-generation process is therefore highly unproductive and time-consuming. This paper proposes an efficient tool path re-generation approach for 3-axis d ie and mold machining. It is assumed in this research that a gouge-free too l path has been generated for the original mold and the same ball end-mill is to be used to generate the tool path for the modified mold. It is shown in th is work that if the boundary of the modified region is interference-free, the a ffected CL points are enclosed by a set of CL points which correspond to the poi nts on the boundary of the modified region. An efficient tool path re-generatio n algorithm was developed in this research. With this algorithm, a closed CL cur ve is first generated from the boundary of the affected region. The CL points fo r the original mold are then analyzed by comparing the x and y values with the b oundary of the affected CL points. If the CL points are not affected by the modi fication, they are output to the new CL file directly. Otherwise, they are remov ed and replaced by the new CL points. The algorithm has been tested using severa l industrial parts, and results show that it is efficient, robust, and the re-g enerated tool path is gouge-free and smooth.
基金the Natural Science Foundation of Jiangxi Province(No.550067)the National Natural Science Foundation of China(No.50465003)Foundation of the State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology(No.06-3)
文摘An approach was presented to characterize the stress response of workpiece in hard machining, accounting for the effect of the initial workpiece hardness in addition to temperature, strain and strain rate on flow stress in this paper. AISI H13 die steel was chosen to verify this methodology. The proposed flow stress model demonstrates a good agreement with experimental data. Therefore, the proposed model can be used to predict the corresponding flow stress-strain response ofAISl H13 die steel with variation of the initial workpiece hardness in hard machining.
基金Project (2010-0008-277) supported by NCRC (National Core Research Center) Program through the National Research Foundation of Korea funded by the Ministry of Education, Science and Technology, Korea
文摘Micro prism film used in LCD industry can be manufactured by roll to roll method with copper-plated roll mold. As copper-plated roll mold is getting larger, pitch error is getting severer. The pitch error drops the quality of micro prism film. The main cause of the pitch error was investigated during machining large roll mold whose machined length was 1 200 mm. The temperature of machining system was elevated during machining roll mold, and this elevation induced thermal expansion of the system. The temperature variation around the roll mold also made thermal expansion of the roll mold. The amount of thermal expansion had strong relationship to the amount of pitch error. Therefore, the roll mold was machined after warming-up of machining system and precise temperature controller around copper-plated roll mold was installed, which minimized the temperature variation. Finally, precise micro prism patterns without pitch error were machined on the large roll mold.
基金Supported by National Natural Science Foundation of China(Grant No.51205350)Hong Kong Scholars Program of China(Grant No.XJ2013015)Zhejiang Provincial Research Program of Public Welfare Technology Application of China(Grant No.2013C31027)
文摘The current development of precision plastic injection molding machines mainly focuses on how to save material and improve precision, but the two aims contradict each other. For a clamp unit, clamping precision improving depends on the design quality of the stationary platen. Compared with the parametric design of stationary platen, structural scheme design could obtain the optimization model with double objectives and multi-constraints. In this paper, a SE-160 precision plastic injection molding machine with 1600 kN clamping force is selected as the subject in the case study. During the motion of mold closing and opening, the stationary platen of SE-160 is subjected to a cyclic loading, which would cause the fatigue rupture of the tie bars in periodically long term operations. In order to reduce the deflection of the stationary platen, the FEA method is introduced to optimize the structure of the stationary platen. Firstly, an optimal topology model is established by variable density method. Then, structural topology optimizations of the stationary platen are done with the removable material from 50%, 60% to 70%. Secondly, the other two recommended optimization schemes are given and compared with the original structure. The result of performances comparison shows that the scheme II of the platen is the best one. By choosing the best alternative, the volume and the local maximal stress of the platen could be decreased, corresponding to cost-saving material and better mechanical properties. This paper proposes a structural optimization design scheme, which can save the material as well as improve the clamping precision of the precision plastic injection molding machine.
文摘A 3-D mathematical model considering turbulence phenomena has been established based on a computational fluid dynamics technique, so called 3-D SOLA-VOF (Solution Algorithm-Volume of Fluid), to simulate the fluid flow of mold filling process of die casting. In addition, the mathematical model for simulating the heat transfer in die casting process has also been established. The computation program has been developed by the authors with the finite difference method (FDM) recently. As verification, the mold filling process of a S-shaped die casting has been simulated and the simulation results coincide with that of the benchmark test. Finally, as a practical application, the gating design of a motorcycle component was modified by the mold filling simulation and the dies design of another motorcycle component was optimized by the heat transfer simulation. All the optimized designs were verified by the production practice.
基金Project(50975093)supported by the National Natural Science Foundation of ChinaProject(08-0209)supported by New Century Excellent Talent in University,Ministry of Education,ChinaProject(2009ZM0283)supported by the Fundamental Research Funds for the Central Universities,China
文摘Element parameters including volume filled ratio,surface dimensionless distance,and surface filled ratio for DFDM(direct finite difference method)were proposed to describe shape and location of free surfaces in casting mold filling processes.A mathematical model of the filling process was proposed specially considering the mass,momentum and heat transfer in the vicinity of free surfaces.Furthermore,a method for gas entrapment was established by tracking flow of entrapped gas.The model and method were applied to practical ADC1 high pressure die castings.The gas entrapment prediction was compared with the fraction and maximum size of porosities in the different casting parts.The comparison shows validity of the proposed model and method.The study indicates that final porosities in high pressure die castings are dependent on both gas entrapment during mold filling process and pressure transfer within solidification period.
基金This project is supported by National Natural Science Foundation of China (No.50275102)Opening Foundation of State Key Lab of Fluid Power Transmission and Control of Zhejiang University, China (No.GZKF2002004).
文摘The kinetic characteristics of the clamping unit of plastic injection molding machine that is controlled by close loop with newly developed double speed variable pump unit are investigated. Considering the wide variation of the cylinder equivalent mass caused by the transmission ratio of clamping unit and the severe instantaneous impact force acted on the cylinder during the mold closing and opening process, an adaptive control principle of parameter and structure is proposed to improve its kinetic performance. The adaptive correlation between the acceleration feedback gain and the variable mass is derived. The pressure differential feedback is introduced to improve the dynamic performance in the case of small inertia and heavy impact load. The adaptation of sum pressure to load is used to reduce the energy loss of the system. The research results are verified by the simulation and experiment, The investigation method and the conclusions are also suitable for the differential cylinder system controlled by the traditional servo pump unit.
文摘This study investigated the relationship between a subject’s evaluation of injection molding machines (IMMs) and formal design features using Kansei engineering. This investigation used 12 word pairs to evaluate the IMM configurations and employed the semantic differential method to explore the perception of 60 interviewees of 12 examples. The relationship between product feature design and corresponding words was derived by multiple regression analysis. Factor analysis reveals that the 12 examples can be categorized as two styles—advanced style and succinct style. For the advanced style, an IMM should use a rectangular form for the clamping-unit cover and a full-cover for the injection-unit. For the succinct style, the IMM configuration should use a beveled form for the safety cover and a vertical rectangular form for the clamping-unit cover. Quantitative data and suggested guidelines for the relationship between design features and interviewee evaluations are useful to product designers when formulating design strategies.
文摘Fatigue failure is one of the main failure forms of Al-Si-Cu-Mg aluminum alloys.To feature their mechanical aspect of fatigue behavior,the low-cycle fatigue behavior of permanent mold cast and die-cast Al-Si-Cu-Mg alloys at room temperature was investigated.The experimental results show that both permanent mold cast and die-cast Al-Si-Cu-Mg alloys mainly exhibit cyclic strain hardening.At the same total strain amplitude,the die-cast Al-Si-Cu-Mg alloy shows higher cyclic deformation resistance and longer fatigue life than does the permanent mold cast Al-Si-Cu-Mg alloy.The relationship between both elastic and plastic strain amplitudes with reversals to failure shows a monotonic linear behavior,and can be described by the Basquin and Coffin-Manson equations,respectively.
文摘This paper presents some results of direct observation of mold filling in a specially designed die-casting by X-ray diffraction, including comparison with numerical simulation. Based on such work the authors discuss how to prevent gas entrapment and propose new methods.
基金the National Natural Science Foundation of China (No. 51172018)the Kennametal, Inc. for the fnancial support
文摘Powder injection molding (PIM) and die pressing were employed to fabricate nano-TiN modified Ti(C,N)- based cermets. The shrinkage behavior, microstructure, porosity, and mechanical properties of the samples with and without nano-TiN addition fabricated by PIM and die pressing were analyzed. It is demonstrated that for either PIM or die pressing, the porosities are obviously reduced, the mechanical properties are significantly improved after adding nano-TiN, and the hard particles are refined; the rim phase thickness obviously becomes thinner, and the number of dimples in fracture also increases. Compared the samples fabricated by die pressing, it is difficult for PIM to obtain dense Ti(C,N)-based cermets. Due to the too much existence of pores and isolated carbon, the mechanical properties of the sintered samples by PIM are inferior to those of the sintered ones by die pressing.
文摘The paper discussed cutter-work engagement situation hidden behind the mechanical and thermal load effect on cutting edges during high speed hard machining process. The engagement situation was investigated in great detail using experimental and geometrical analytic measures. Experiments were conducted using A1TiN-coated micro-grain carbide end mill cutters to cut hardened die steel. On the basis, a general high speed hard machining strategy, which aimed at eliminating excessive engagement situation during high-speed machining (HSM) hard machining, was proposed. The strategy includes the procedures to identify prone-to-overload areas where excessive engagement situation occurs and then to create a reliable tool path, which has the effect of cutting load reduction to remove the prone-to-overload areas.
基金supported by the key project of Science and Technology Commission of Shanghai Local Government(015211010)
文摘Computer aided design of heat treatment for AISI P20 mold steel with good machinability is attempted to proceed by the commercial software package Thermo-Calc (TCP+DICTRA). Through experimental and theoretical analysis of phase transformation during heat treatment, further knowledge of designing proper heat treatment is obtained. Then the machinability of AISI P20+Ni steel under given heat treatment condition is studied and the influencing factors to their machinability are analyzed. It is shown that heat treatment designed by computer simulation of carbide transformation is applicable to AISI P20+Ni steel with good machinability; AISI P20+Ni steel with tempered sorbite treated by quenching & tempering has optimal machinability; normalizing at the temperature of 910°C & tempering can avoid cracking and result in acceptable machinability in small thickness module.
基金National Natural Science Foundation of China(No.50375075)
文摘This paper introduces a new type machine for polyblends with excellent mixing capabilities of internal mixer and continuous molding character of extruder.The machine includes two functions - mixing and extrusion molding that have been composed together by rational design,so a tandem production mode - "batch + continuous" are opened up.The mathematical model of continuous mixing molding was established and verified availably by experimental research.The main physical mechanical property of vulcanizate,which had met national waterproof material standard,verified the machine practicability.The essential difference from other similar type machines is that this machine is not only suitable in producing granular and powder rubbers but also lumpish rubbers.
文摘This study is based on the modification and development of a two-liter plastic container blow molding machine into a five-liter one provided with a translucent view stripe. This study considers some objectives including reducing the total cost, increasing the amount of plastic recovery, and raising the desired plastic materials. Proper designs were prepared and directly applied on spot. Tangible results were obtained. Among others, the modification of some components of the machine, e.g. the extruder, has led to the possible reuse of the milled (recovery) and extra material from the manufacturing processes. That was also conducive to an effective reduction in the cost of production to 50% in some cases. Prior to its modification, this old machine was used to produce polyvinyl chloride (PVC) containers that have become prohibited these days for their damaging effect on man’s life. For now, and after modification, it has become possible to use High Density Polyethylene (HDPE) material, a fact that has improved labor conditions, too.
文摘Larger and larger proportions of aluminium castings,especially those produced by the die casting process,can be observed during recent years in the automotive industry,house-hold articles and others.In case of the automotive industry,apart from the traditional elements produced by the die pressure method such as engine blocks or crank shaft bedplates,aluminium is displacing steel from structural parts of cars('body in white').The current state and development directions of the structural solutions of cold-chamber die castings are analysed in this paper.These solutions drive the prospective development of these machines and die casting technology.The focus is mainly on essential functional systems such as:hydraulic drives of closing and locking units,as well as pressing in die machines of known companies present on the European market.
文摘At the China International Food Packing Machinery Exhibition, the new model die set for PET plastic jet-mouldingmachine developed by the Zhejiang Province Taizhou Municipality Huangyan Sanyou Plastics Factory attracted the attention of numerous domestic and foreign clients. They rushed to the stand in great numbers for consultation and talks on ordering. According to the evaluation of the experts concerned, the die set is the most advanced one nationwide for PET plastic jet-moulding machinery.