Detection of 2-dimention spark locations by electromagnetic detection method in electrical discharge machining (EDM) is studied. The method, which is applied and investigated, is based on the fact that the release of ...Detection of 2-dimention spark locations by electromagnetic detection method in electrical discharge machining (EDM) is studied. The method, which is applied and investigated, is based on the fact that the release of energy from a spark is transformed into electromagnetic wave around the workpiece. A new sensor system composed of high precision linear Hall components and cubic ferrite is used to detect the intensity of magnetic field. Relation equation between the output of the sensor system and 2-dimention spark locations experiment under a spiculate electrode is introduced, and its diagram of curve is drawn. As a result, the information that can be achieved by detecting spark’s location gives new possibilities for an extended analysis of the EDM-process.展开更多
The findings of a study on the optimization of Electric Discharge Machining(EDM)procedure for processing cylindrically shaped components with graphite electrodes are presented in this paper.Tool steel 90CrSi was the m...The findings of a study on the optimization of Electric Discharge Machining(EDM)procedure for processing cylindrically shaped components with graphite electrodes are presented in this paper.Tool steel 90CrSi was the material of choice for the study’s workpiece.Additionally,the Electrode Wear Rate(EWR)was chosen as the optimization problem’s objective function.An experiment using the Taguchi design was conducted to address this issue.Additionally,experiments were created and their outcomes were analyzed using the Minitab R19 program.The impact of the input process factors on EWR was investigated,including the powder concentration,the pulse on and off times,the servo current,and the servo voltage.Additionally,the best process variables for a minimal EWR were provided.展开更多
文摘Detection of 2-dimention spark locations by electromagnetic detection method in electrical discharge machining (EDM) is studied. The method, which is applied and investigated, is based on the fact that the release of energy from a spark is transformed into electromagnetic wave around the workpiece. A new sensor system composed of high precision linear Hall components and cubic ferrite is used to detect the intensity of magnetic field. Relation equation between the output of the sensor system and 2-dimention spark locations experiment under a spiculate electrode is introduced, and its diagram of curve is drawn. As a result, the information that can be achieved by detecting spark’s location gives new possibilities for an extended analysis of the EDM-process.
文摘The findings of a study on the optimization of Electric Discharge Machining(EDM)procedure for processing cylindrically shaped components with graphite electrodes are presented in this paper.Tool steel 90CrSi was the material of choice for the study’s workpiece.Additionally,the Electrode Wear Rate(EWR)was chosen as the optimization problem’s objective function.An experiment using the Taguchi design was conducted to address this issue.Additionally,experiments were created and their outcomes were analyzed using the Minitab R19 program.The impact of the input process factors on EWR was investigated,including the powder concentration,the pulse on and off times,the servo current,and the servo voltage.Additionally,the best process variables for a minimal EWR were provided.
