The characteristic differences of tropical cyclones forming over the western North Pacific and the South China Sea

The best track dataset of tropical cyclones in the western North Pacific （WNP） and the South China Sea （SCS） from 1977 to 2005 during the satellite era, the NCEP/NCAR reanalysis dataset and the extended reconstructed sea surface temperature dataset are employed in this study. The main climatological characteristics of tropical cyclone formation over the WNP and the SCS are compared. It is found that there is obviously different for the locations of tropical cyclone origins, achieving the lowest central pressure and termination points between over the WNP and over the SCS. The annual number of tropical cyclones forming over the SCS is obviously less than over the WNP, and there is a significant negative correlation with the correlation coefficient being - 0.36 at the 5% significance level between over the WNP and over the SCS. The mean speed of tropical cyclone moving is 6.5 m/s over the WNP and 4.6 m/s over the SCS. The mean lowest central pressure of tropical cyclones is obviously weaker over the SCS than over the WNP. The tropical cyclone days per year, mean total distance and total displacement of tropical cyclone traveled over the WNP are all obviously longer than those over the SCS. Tropical cyclone may intensify to Saffir - Simpson hurricane scale 5 over the WNP, but no tropical cyclone can intensify to Saffir - Simpson hurricane scale 3 over the SCS. The changing ranges of the radii （R15,R16） of the 15.4 m/s winds them and the 25.7 m/s winds over the WNP are obviously wider than those over the SCS, and the median values of the radii over the WNP are also larger than those over the SCS. For the same intensity of tropical cyclones, both radii have larger medians over the WNP than over the SCS. The correlations of annual mean tropical cyclone size parameters between over the WNP and over the SCS are not significant. At the same time, the asymmetric radii of tropical cyclones over the WNP are different from those over the SCS.

FINITE DIFFERENCE FRACTIONAL STEP METHODS FOR THE TRANSIENT BEHAVIOR OF A SEMICONDUCTOR DEVICE

Characteristic finite difference fractional step schemes are put forward. The electric potential equation is described by a seven-point finite difference scheme, and the electron and hole concentration equations are treated by a kind of characteristic finite difference fractional step methods. The temperature equation is described by a fractional step method. Thick and thin grids are made use of to form a complete set. Piecewise threefold quadratic interpolation, symmetrical extension, calculus of variations, commutativity of operator product, decomposition of high order difference operators and prior estimates are also made use of. Optimal order estimates in l2 norm are derived to determine the error of the approximate solution. The well-known problem is thorongley and completely solred.

CHARACTERISTIC FINITE DIFFERENCE ALTERNATING-DIRECTION METHOD ANDANALYSIS FOR NUMERICAL RESERVOIR SIMULATION

Petroleum science has made remarkable progress in organic geochemistry and in the research into the theories of petroleum origin, its transport and accumulation. In estimating the oil-gas resources of a basin, the knowledge of its evolutionary history and especially the numerical computation of fluid flow and the history of its changes under heat is vital. The mathematical model call be described as a coupled system of nonlinear partial differentical equations with initial-boundary value problems. This thesis, from actual conditions such as the effect of fluid compressibility and the characteristic of large-scal science-engineering computalion. puts forward a kind of characteristic finite difference alternating-direction scheme. Optimal order estimates in L-2 norm are derived for the error in the approximate solutions.

Characteristic finite difference method and application for moving boundary value problem of coupled system

The coupled system of multilayer dynamics of fluids in porous media is to describe the history of oil-gas transport and accumulation in basin evolution.It is of great value in rational evaluation of prospecting and exploiting oil-gas resources.The mathematical model can be described as a coupled system of nonlinear partial differential equations with moving boundary values.A kind of characteristic finite difference schemes is put forward,from which optimal order estimates in l~2 norm are derived for the error in the approximate solutions.The research is important both theoretically and practically for the model analysis in the field,the model numerical method and software development.

THEORY AND APPLICATION OF FRACTIONAL STEP CHARACTERISTIC FINITE DIFFERENCE METHOD IN NUMERICAL SIMULATION OF SECOND ORDER ENHANCED OIL PRODUCTION

A kind of second-order implicit fractional step characteristic finite difference method is presented in this paper for the numerically simulation coupled system of enhanced （chemical） oil production in porous media. Some techniques, such as the calculus of variations, energy analysis method, commutativity of the products of difference operators, decomposition of high-order difference operators and the theory of a priori estimates are introduced and an optimal order error estimates in l^2 norm is derived. This method has been applied successfully to the numerical simulation of enhanced oil production in actual oilfields, and the simulation results ate quite interesting and satisfactory.

Modified characteristic finite difference fractional step method for moving boundary value problem of nonlinear percolation system

A fractional step scheme with modified characteristic finite differences run- ning in a parallel arithmetic is presented to simulate a nonlinear percolation system of multilayer dynamics of fluids in a porous medium with moving boundary values. With the help of theoretical techniques including the change of regions, piecewise threefold quadratic interpolation, calculus of variations, multiplicative commutation rule of differ- ence operators, multiplicative commutation rule of difference operators, decomposition of high order difference operators, induction hypothesis, and prior estimates, an optimal order in 12 norm is displayed to complete the convergence analysis of the numerical algo- rithm. Some numerical results arising in the actual simulation of migration-accumulation of oil resources by this method are listed in the last section.

The Time-Frequency Energy Attenuation Factor and Its Application on the Basis of Gauss Linear Frequency-Modulated Continuous Wavelet Transform

Based on the Gauss linear frequency modulated wavelet transform, a new characteristic index is presented, namely time frequency energy attenuation factor which can reflect the difference features of waveform in earthquake focus mechanism, wave traveling path and its attenuation characteristics in focal area or near field. In order to test its validity, we select the natural earthquakes and explosion or collapse events whose focus mechanisms vary obviously,and some natural earthquakes located at the same site or in a very small area. The study indicates that the time frequency energy attenuation factors of the natural earthquakes are obviously different with that of explosion or collapse events, and the change of the time frequency energy attenuation factors is relatively stable for the earthquakes under the normal seismicity background. Using the above mentioned method, it is expected to offer a useful criterion for strong earthquake prediction by continuous earthquake observation.

THE EFFECT OF DRAINAGE ON CHEMICALELEMENTS CONTENT OF MARSH

This paper takes marsh in the Sanjiang Plain as an example in order to research the effect of draining on the chemical elements in marsh. The Sanjiang Ecological Test Station of Mire and Uetland serves as the resarch base. The authors selected soil samples in the Sanjiang Plain (the top and the end of the drain, marsh soil and degeneration marsh soil), mainly analyzed contents of main ions (HCO 3 ? , Cl?, SO 4 2? and NO 3 ? ), main heavy metals (Fe, Mn, Zn and Cu), nutritive elements (N, P, K), organic matter and pH value. By testing these samples as above, the paper initially researches the effect on chemical elements content by draining by the means of the contrast of chemical elements contents between marsh soil and degenerative marsh soil and different characteristics of marsh soil elements. Results show that a lot of chemical elements had been lost because of draining.

A study of the strong pulses detected from PSR B0656+14 using the Urumqi 25-m radio telescope at 1540 MHz

We report on the properties of strong pulses from PSR B0656＋14 by analyzing the data obtained using the Urumqi 25-m radio telescope at 1540 MHz from August 2007 to September 2010.In 44 h of observational data,a total of 67 pulses with signal-to-noise ratios above a 5σthreshold were detected.The peak flux densities of these pulses are 58 to 194 times that of the average profile,and their pulse energies are 3 to 68 times that of the average pulse.These pulses are clustered around phases about 5-ahead of the peak of the average profile.Compared with the width of the average profile,they are relatively narrow,with the full widths at half-maximum ranging from 0.28 ° to 1.78 °.The distribution of pulse-energies follows a lognormal distribution.These sporadic strong pulses detected from PSR B0656＋14 have different characteristics from both typical giant pulses and its regular pulses.

CONVERGENCE ANALYSIS OF MIXED VOLUME ELEMENT-CHARACTERISTIC MIXED VOLUME ELEMENT FOR THREE-DIMENSIONAL CHEMICAL OIL-RECOVERY SEEPAGE COUPLED PROBLEM

The physical model is described by a seepage coupled system for simulating numerically three-dimensional chemical oil recovery, whose mathematical description includes three equations to interpret main concepts. The pressure equation is a nonlinear parabolic equation, the concentration is defined by a convection-diffusion equation and the saturations of different components are stated by nonlinear convection-diffusion equations. The transport pressure appears in the concentration equation and saturation equations in the form of Darcy velocity, and controls their processes. The flow equation is solved by the conservative mixed volume element and the accuracy is improved one order for approximating Darcy velocity. The method of characteristic mixed volume element is applied to solve the concentration, where the diffusion is discretized by a mixed volume element method and the convection is treated by the method of characteristics. The characteristics can confirm strong computational stability at sharp fronts and it can avoid numerical dispersion and nonphysical oscillation. The scheme can adopt a large step while its numerical results have small time-truncation error and high order of accuracy. The mixed volume element method has the law of conservation on every element for the diffusion and it can obtain numerical solutions of the concentration and adjoint vectors. It is most important in numerical simulation to ensure the physical conservative nature. The saturation different components are obtained by the method of characteristic fractional step difference. The computational work is shortened greatly by decomposing a three-dimensional problem into three successive one-dimensional problems and it is completed easily by using the algorithm of speedup. Using the theory and technique of a priori estimates of differential equations, we derive an optimal second order estimates in 12 norm. Numerical examples are given to show the effectiveness and practicability and the method is testified as a powerful tool to solve the important problems.

A Mixed-finite Volume Element Coupled with the Method of Characteristic Fractional Step Difference for Simulating Transient Behavior of Semiconductor Device of Heat Conductor And Its Numerical Analysis

The mathematical system is formulated by four partial differential equations combined with initial- boundary value conditions to describe transient behavior of three-dimensional semiconductor device with heat conduction. The first equation of an elliptic type is defined with respect to the electric potential, the successive two equations of convection dominated diffusion type are given to define the electron concentration and the hole concentration, and the fourth equation of heat conductor is for the temperature. The electric potential appears in the equations of electron concentration, hole concentration and the temperature in the formation of the intensity. A mass conservative numerical approximation of the electric potential is presented by using the mixed finite volume element, and the accuracy of computation of the electric intensity is improved one order. The method of characteristic fractional step difference is applied to discretize the other three equations, where the hyperbolic terms are approximated by a difference quotient in the characteristics and the diffusion terms are discretized by the method of fractional step difference. The computation of three-dimensional problem works efficiently by dividing it into three one-dimensional subproblems and every subproblem is solved by the method of speedup in parallel. Using a pair of different grids （coarse partition and refined partition）, piecewise threefold quadratic interpolation, variation theory, multiplicative commutation rule of differential operators, mathematical induction and priori estimates theory and special technique of differential equations, we derive an optimal second order estimate in L2-norm. This numerical method is valuable in the simulation of semiconductor device theoretically and actually, and gives a powerful tool to solve the international problem presented by J. Douglas, Jr.

Characteristics of holey fibers fabricated at different drawing speeds

The effects of high drawing speeds on parameters of holey fibers are presented. A holey fiber preform structure was made by using tube-in-tube method and was drawn at high speeds with an aim of mass production to meet the demand of next generation communication systems. Transmission parameters such as numerical aperture and normalized frequency of the fabricated holey fibers have been measured and compared with theoretical values based on effective index method. Although the fabricated holey fibers were not of high quality, the analyses of the parameters have shown promising outlook for fabrication of such fibers.

High peak power subnanosecond pulse characteristics with different wall structured CNTs in a doubly QML Nd:Lu_(0.15)Y_(0.85)VO_4 laser

By simultaneously employing both an electro-optic modulator and carbon nanotube saturable absorber(CNT-SA)in a dual-loss modulator, a subnanosecond single mode-locking pulse underneath a Q-switched envelope with high peak power was generated from a doubly Q-switched and mode-locked(QML) Nd:Lu_(0.15)Y_(0.85)VO_4 laser at1.06 μm for the first time, to our knowledge. CNTs with different wall structures—single-walled CNTs(SWCNTs),double-walled CNTs(DWCNTs), and multi-walled CNTs(MWCNTs)—were used as SAs in the experiment to investigate the single mode-locking pulse characteristics. At pump power of 10.72 W, the maximum peak power of1.312 MW was obtained with the DWCNT.

A high-efficiency regenerative shock absorber considering twin ball screws transmissions for application in range-extended electric vehicles

Renewable energy technologies,particularly in electric vehicles(EVs),have received significant attention in re-cent years.The wasted energy in a vehicle’s shock absorber can be converted into an alternative energy source by regenerative shock absorbers.In this paper,a high-efficiency regenerative shock absorber considering twin ball screws transmissions is proposed for application in range-extended electric vehicles.The proposed regenerative shock absorber can convert vibrational kinetic energy,which is traditionally dissipated as heat in suspension systems,into electricity.The proposed system is divided into four modules:suspension vibration input module,transmission module,generator module and power storage module.Induced by road roughness,the irregular linear oscillations of the suspension are transmitted to the suspension vibration input module.The reciprocating vibrations are converted into unidirectional rotation of the generator by a pair of ball screws,gears,and two overrun clutches in the transmission module.The utilisation of different screw pitches leads to different damping coefficients for upward and downward progress,enabling the shock absorber to fully utilise elastic elements to im-prove vehicle comfort when compressed and quickly absorb vibrations when stretched.The electricity produced by the generator is stored in supercapacitors to charge the battery and extend the range of EVs.The mechanical properties of the full-scaled fabricated prototype were studied by utilising a mechanical testing and sensing fix-ture.An average power output of 3.701 W in 1Hz-3 mm sinusoidal vibration input and a peak efficiency of 51.1%and average efficiency of 36.4%were achieved in a bench tests.The range can be approximately extended by 1 mile per 100 miles when EV is driving on the road of class B with a speed of 60 km/h,demonstrating that the proposed high-efficiency regenerative shock absorber is beneficial for harvesting renewable energy,and practical and significant for extending the range of EVs.

The Characteristic of Threading Dislocation in Different Structures GaN Films Grown by MOCVD

Three mechanisms to reduce threading dislocations(TDs) in GaN films as the epitaxial films grow thicker are suggested by SEM and