The Impact of Different Mining and Releasing Ratios on the Over-Support Pressure of Header Working Face

Through the theoretical analysis of overburden destabilization mechanism, FLAC 3D simplified plane numerical simulation method and field measurement method, we compared the relationship of overburden support pressure at 35 m of workface recovery, and the peak overburden support pressure decreased from 13.85 Mpa to 11.97 Mpa from 1:1 to 1:3. With the increase of mining ratio, the peak over-supporting pressure decreases: with the increase of top coal recovery thickness, the peak over-supporting pressure and the influence range will be further expanded, and the distance between the peak over-supporting pressure and the coal wall of the working face will be further increased and the high stress zone of the peak area will be expanded simultaneously.

Numerical Simulation of the Settling Flux of Biodeposition in a Bay with Cage Culture Through Similarity Theory and a Simplified Pollution Source

The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is extremely important for determining the spatial distribution of biodeposition.Theoretically,biodeposition in cage culture areas without specific emission rules can be simplified as point source pollution.Fluent is a fluid simulation software that can simulate the dispersion of particulate matter simply and efficiently.Based on the simplification of pollution sources and bays,the settling flux of biodeposition can be easily and effectively simulated by Fluent fluid software.In the present work,the feasibility of this method was evaluated by simulation of the settling flux of biodeposition in Maniao Bay,Hainan Province,China,and 20 sampling sites were selected for determining the settling fluxes.At sampling sites P1,P2,P3,P4,P5,Z1,Z2,Z3,Z4,A1,A2,A3,A4,B1,B2,C1,C2,C3 and C4,the measured settling fluxes of biodeposition were 26.02,15.78,10.77,58.16,6.57,72.17,12.37,12.11,106.64,150.96,22.59,11.41,18.03,7.90,19.23,7.06,11.84,5.19 and 2.57 g d^(−1)m^(−2),respectively.The simulated settling fluxes of biodeposition at the corresponding sites were 16.03,23.98,8.87,46.90,4.52,104.77,16.03,8.35,180.83,213.06,39.10,17.47,20.98,9.78,23.25,7.84,15.90,6.06 and 1.65 g d^(−1)m^(−2),respectively.There was a positive correlation between the simulated settling fluxes and measured ones(R=0.94,P=2.22×10^(−9)<0.05),which implies that the spatial differentiation of biodeposition flux was well simulated.Moreover,the posterior difference ratio of the simulation was 0.38,and the small error probability was 0.94,which means that the simulated results reached an acceptable level from the perspective of relative error.Thus,if nonpoint source pollution is simplified to point source pollution and open waters are simplified based on similarity theory,the setting flux of biodeposition in the open waters can be simply and effectively simulated by the fluid simulation software Fluent.

MOLECULAR BEAM STUDIES ON OXIDATION OF CO ON Pd WITH DIFFERENT MIXED RATIOS OF P_(CO) TO P_(O2) ~*

Here some steady-state experiments on oxidation of CO on Pd were performed on a molecular beam apparatus. It is found that the characteristics of the rate of CO_2 formation r versus substrate temperature T are dependent on the ratio P=P_(CO)/P_(O2) in the mixed beam. These characteristics are related to the complicated interactions of co-adsorbed CO and O particles on Pd surface.

A smart simple spectrophotometric method for simultaneous determination of binary mixtures

A new simple spectrophotometric method was developed for the simultaneous determination of drugs with interfering spectra in binary mixtures without previous separation. The new method is based on a simple modification for the ratio subtraction method. This modification enabled wider range of application. The proposed ratio difference method was applied for the determination of brimonidine and timolol in laboratory prepared mixtures with mean percentage recoveries 100.40±2.29 and 101.23± 1.30 respectively, and in their pharmaceutical formulation with mean percentage recoveries 101.08±0.44 and 100.66±0.52 respectively. The suggested ratio difference method was validated according to USP guidelines and can be applied for routine aualitv control testing.

Selective Determination of Itraconazole in the Presence of Its Oxidative Degradation Product by A New Spectrophotometric Method

A simple,specific,accurate and precise spectrophotometric stability indicating method is developed for determination of itraconazole in the presence of its oxidative degradation product and in pharmaceutical formulations.A newly developed spectrophotometric method called ratio difference method by measuring the difference in amplitudes between 230 and 265nm of ratio spectra.The calibration curve is linear over the concentration range of 5~25μg·mL-1 with mean percentage recovery of 99.81±1.002.Selective quantification of itraconazole,singly in bulk form,pharmaceutical formulations and in the presence of its oxidative degradation product is demonstrated.The results have been statistically compared with a pharmacopeial method.

Intrinsically asymmetric atomic character regulates piezoelectricity in two-dimensional materials

Decreasing of layer thickness causes the decrease of polarization until it disappears due to the existence of depolarization field.Therefore,the search for strong piezoelectric materials is highly desirable for multifunctional ultra-thin piezoelectric devices.Herein,we propose a common strategy for achieving strong piezoelectric materials through the electronic asymmetry induced by the intrinsically asymmetric atomic character of different chalcogen atoms.Accordingly,in the tetrahedral lattice structures,for example,M4X3Y3(M=Pd/Ni,X/Y=S,Se or Te,X≠Y)monolayers are proved to display excellent out-of-plane piezoelectricity.Ni4Se3Te3 possesses the largest piezoelectric coefficient d33 of 61.57 pm/V,which is much larger than that of most 2D materials.Enhancing the electronic asymmetry further increases the out-of-plane piezoelectricity of Janus M4X3Y3 materials.Correspondingly,the out-of-plane piezoelectricity is positively correlated with the ratio of electronegativity difference(Red)and the electric dipole moment(P).This work provides alternative materials for energy harvesting nano-devices or self-energized wearable devices,and supplies a valuable guideline for predicting 2D materials with strong out-of-plane piezoelectricity.

A novel non-iterative shape method for estimating the decay time constant of the finger photoplethysmographic pulse

The photoplethysmogram(PPG) of a pulse wave,similar in appearance to the arterial blood pressure(ABP) waveform,contains rich information about the cardiovascular system.The decay time constant RC,equal to the product of peripheral resistance R and total arterial compliance C,is a meaningful cardiovascular model parameter in vascular assessment.Using or ameliorating the existing ABP methods does not achieve a satisfactory estimation of RC from the PPG volume pulse(VRC).Thus,a novel non-iterative shape method(NSM) of evaluating VRC is introduced in this paper.The mathematic expression between a novel,readily available morphological parameter called the area difference ratio(ADR) and VRC was established.As it was difficult to calculate VRC from the complicated expression analytically,we recommend estimating it using a piecewise linear interpolation criterion.Also,since the effect of the PPG magnitude is eliminated in the calculation of ADR,precaliberation or normalization is dispensable in the NSM.Results of human experiments indicated that the NSM was computationally efficient,and the simulation experiments confirmed that the NSM was theoretically available for ABP.