Reduction of Cogging Torque and Electromagnetic Vibration Based on Different Combination of Pole Arc Coefficient for Interior Permanent Magnet Synchronous Machine

Cogging torque and electromagnetic vibration are two important factors for evaluating permanent magnet synchronous machine(PMSM)and are key issues that must be considered and resolved in the design and manufacture of high-performance PMSM for electric vehicles.A fast and accurate magnetic field calculation model for interior permanent magnet synchronous machine(IPMSM)is proposed in this article.Based on the traditional magnetic potential permeance method,the stator cogging effect and complex boundary conditions of the IPMSM can be fully considered in this model,so as to realize the rapid calculation of equivalent magnetomotive force(MMF),air gap permeance,and other key electromagnetic properties.In this article,a 6-pole 36-slot IPMSM is taken as an example to establish its equivalent solution model,thereby the cogging torque is accurately calculated.And the validity of this model is verified by a variety of different magnetic pole structures,pole slot combinations machines,and prototype experiments.In addition,the improvement measure of the machine with different combination of pole arc coefficient is also studied based on this model.Cogging torque and electromagnetic vibration can be effectively weakened.Combined with the finite element model and multi-physics coupling model,the electromagnetic characteristics and vibration performance of this machine are comprehensively compared and analyzed.The analysis results have well verified its effectiveness.It can be extended to other structures or types of PMSM and has very important practical value and research significance.

A Comparative Study on the Excitation of Large Volume Airgun Source with Different Combinations in Hutubi,Xinjiang,China

In order to study the excitation of large-volume airgun source with different combinations in Hutubi,Xinjiang,China,we conducted a targeted experiment.The method of timefrequency analysis is used to study the signals recorded by a seismometer on the shore of the excited pool,and it is concluded that different gun combinations will lead to different frequency of bubble pulse signals.Besides,linear combination method is used to analyze the signal-to-noise ratios of signals excited by different gun combinations which was recorded by seismic stations around the airgun source.In order to improve the signal-tonoise ratios,it is more effective to increase the activation energy(the number of excited guns at the same time)than to stack the excited signals with smaller energy repeatedly.

A Hybrid ESA-CCD Method for Variable-Order Time-Fractional Diffusion Equations

In this paper, we study the solutions for variable-order time-fractional diffusion equations. A three-point combined compact difference (CCD) method is used to discretize the spatial variables to achieve sixth-order accuracy, while the exponential-sum-approximation (ESA) is used to approximate the variable-order Caputo fractional derivative in the temporal direction, and a novel spatial sixth-order hybrid ESA-CCD method is implemented successfully. Finally, the accuracy of the proposed method is verified by numerical experiments.

DECOMPOSITION OF BLACK LIQUOR BY ULTRASOUND PROCESS

Ultrasound (US)-induced cavitation is an effective way in oxidizing organic contaminants in wastewater either as the independent operation unit or in combination with other oxidation methods. In this paper, black liquor and filtrate after acidifying and settling were sonicated. The effect of working parameters on ultrasonic degradation of black liquor, such as different combination methods, frequency, power supply, initial concentration, pH, duration time, ionic strength and catalyst were studied. The results were as follows: (1) At the conditions of 40kHz, 100W, 4h, pH at 6 and temperature 30?℃, utilizing US/US-H2O2/US-Fenton, weak-orange filtrate turned to colloid with the increase of time and little sediment produced after settling. Especially filtrate came to be milk white collides and upper water approached to nearly achromatic by US-Fenton. Compared with the US, US-H2O2/US-Fenton COD (Chemical oxidation demand) removal ratio can increase 15%, 30% respectively. Because of more hydroxyl radicals produced in the reaction process; (2) At the condition of 100W and 4h, the degradation efficiency of black liquor was better at 40kHz over at 20kHz. Moreover black liquor can be biodegraded easily. Those based on that the big molecule of contaminants in aqueous solution can be changed into the little molecule with ultrasound (3) At the condition of 40kHz and 4h, the COD removal ratio of black liquor was more higher at 60W than at 80W, while the removal ratio of COD at 60W was nearly close to the ratio at 100W; (4) The initial concentration of black liquor influenced the effect of sonochemical degradation; (5) The variation of pH had no effect on degradation; (6) The longer the duration time, the greater the removal ratio of COD. But this ratio increased slowly after 4h; (7) Adding 0.2g/L NaCl to change the ionic strength of the black liquor, the COD removal ratio can increase 10%; (8) The degradation rates increased by the coexistent catalysts of TiO2, Co2+ and Ag+.

Stress analytical solution for plane problem of a double-layered thick-walled cylinder subjected to a type of non-uniform distributed pressure

The stress state around circular openings,such as boreholes,shafts,and tunnels,is usually needed to be evaluated.Solutions for stresses,strains and ultimate bearing capacities of pressurized hollow cylinder are common cases.Stress analytical method for plane problem of a double-layered thick-walled cylinder subjected to a type of non-uniform pressure on the outer surface and uniform radial pressure on the inner surface is given.The power series method of complex function is used.The stress analytical solution is obtained with the assumption that two layers of a cylinder are fully contacted.The distributions of normal and tangential contact stress along the interface,tangential stress on the inner boundary and stresses in the radial direction at θ=0°,45° and 90°,are obtained.An example indicates that,when the elastic modulus of the inner layer of a double-layered thick-walled cylinder is smaller than that of the outer layer,the tangential stress is smaller than that in the corresponding point for a traditional cylinder composed of homogeneous materials.In that way,stress concentration at the inner surface can be alleviated and the stress distribution is more uniform.This is a capable way to enhance the elastic ultimate bearing capacity of thick-walled cylinder.

Improved geophysical excitations constrained by polar motion observations and GRACE/SLR time-dependent gravity

At seasonal and intraseasonal time scales, polar motions are mainly excited by angular momentum fluctuations due to mass redistributions and relative motions in the atmosphere, oceans, and continental water, snow, and ice, which are usually provided by various global atmospheric, oceanic, and hydrological models（some with meteorological observations assimilated; e.g., NCEP, ECCO, ECMWF, OMCT and LSDM etc.）. Unfortunately, these model outputs are far from perfect and have notable discrepancies with respect to polar motion observations, due to non-uniform distributions of meteorological observatories,as well as theoretical approximations and non-global mass conservation in these models. In this study,the LDC（Least Difference Combination） method is adopted to obtain some improved atmospheric,oceanic, and hydrological/crospheric angular momentum（AAM, OAM and HAM/CAM, respectively）functions and excitation functions（termed as the LDCgsm solutions）. Various GRACE（Gravity Recovery and Climate Experiment） and SLR（Satellite Laser Ranging） geopotential data are adopted to correct the non-global mass conservation problem, while polar motion data are used as general constraints. The LDCgsm solutions can reveal not only periodic fluctuations but also secular trends in AAM, OAM and HAM/CAM, and are in better agreement with polar motion observations, reducing the unexplained excitation to the level of about 5.5 mas（standard derivation value; about 1/5-1/4 of those corresponding to the original model outputs）.