Tunable and Switchable Narrow Bandwidth Semiconductor-Saturable Absorber Mirror Mode-Locked Yb-Doped Fiber Laser Delivering Different Pulse Widths

The wavelength-tunable and switchable narrow bandwidth mode-locking operation is demonstrated in an all fiber laser based on semiconductor-saturable absorber mirror （SESAM）. Two narrow-band fiber Bragg gratings centered at 1029.9nm and 1032nm respectively with a polarization controller inserted between them are used to realize the wavelength switchable between 1029.9nm and 1032nm. The laser delivers different pulse widths of 7.5ps for 1030nm and 20ps for 1032nm. The maximum output power for both could reach -6.5mW at single pulse operation. The output wavelength couM be tuned to about 0.gnm intervals ranging from 1030.2nm to 1031.1 nm and from 1032.15nm to 1033.7nm with the temperature change of the fiber Bragg grating, respectively.

Characteristics of holey fibers fabricated at different drawing speeds

The effects of high drawing speeds on parameters of holey fibers are presented. A holey fiber preform structure was made by using tube-in-tube method and was drawn at high speeds with an aim of mass production to meet the demand of next generation communication systems. Transmission parameters such as numerical aperture and normalized frequency of the fabricated holey fibers have been measured and compared with theoretical values based on effective index method. Although the fabricated holey fibers were not of high quality, the analyses of the parameters have shown promising outlook for fabrication of such fibers.

Genes Expressing Differences in Upland Cotton Fiber Development Between 12 DPA and 16 DPA

Cotton is the major dominant natural fiber crop on the earth.Although some current cotton genetics and breeding programs had made great progresses in cotton lint yield increases and disease resistance(tolerance),fiber quality has little improvement.Global understanding genes expression

Noise-like pulse generation from a thulium-doped fiber laser using nonlinear polarization rotation with different net anomalous dispersion

A mode-locked thulium-doped fiber laser(TDFL) based on nonlinear polarization rotation(NPR) with different net anomalous dispersion is demonstrated. When the cavity dispersion is-1.425 ps^2, the noise-like(NL) pulse with coherence spike width of 406 fs and pulse energy of 12.342 nJ is generated at a center wavelength of 2003.2 nm with 3 dB spectral bandwidth of 23.20 nm. In the experimental period of 400 min, the 3 dB spectral bandwidth variation, the output power fluctuation, and the central wavelength shift are less than 0.06 nm, 0.04 d B, and0.4 nm, respectively, indicating that the NPR-based TDFL operating in the NL regime holds good long-term stability.

Harmonic dissipative soliton resonance pulses in a fiber ring laser at different values of anomalous dispersion

The pulse dynamics of harmonic mode-locking in a dissipative soliton resonance(DSR) region in an erbiumdoped fiber ring laser is investigated at different values of anomalous dispersion. The fiber laser is mode-locked by a nonlinear polarization rotation technique. By inserting 0–200 m anomalous dispersion single-mode fiber in the laser cavity, the cavity length is changed from 17.3 to 217.3 m, and the corresponding dispersion of the cavity ranges from -0.27 to-4.67 ps^2. The observed results show that the tuning range of repetition rate under a harmonic DSR condition is highly influenced by the cavity dispersion. Furthermore, it is found that, by automatically adjusting their harmonic orders, the lasers can work at certain values of repetition rate, which are independent of the cavity length and dispersion. The pulses at the same repetition rate in different laser configurations have similar properties, demonstrating that each achievable repetition rate represents an operation regime of harmonic DSR lasers.

Writing Fiber Grating of Different Wavelength Using the Same Phase Mask

Chirped fiber grating was used in dispersion compensator. We tried to use the same phase mask to write fiber grating of different wavelength with two methods to reduce the price of the fiber grating.

Variation of Lasing Wavelength of Fiber Grating Semiconductor Laser with Temperature for Different External Cavity Lengths

For different external cavity lengths, lasing wavelength variation of fiber grating external cavity semiconductor laser (FGECSL) with ambient temperature has been investigated theoretically, and the theoretical results are in agreement with reported experimental observations.

Midinfrared optical frequency comb based on difference frequency generation using high repetition rate Er-doped fiber laser with single wall carbon nanotube film

We demonstrated stable midinfrared(MIR) optical frequency comb at the 3.0 μm region with difference frequency generation pumped by a high power, Er-doped, ultrashort pulse fiber laser system. A soliton mode-locked161 MHz high repetition rate fiber laser using a single wall carbon nanotube was fabricated. The output pulse was amplified in an Er-doped single mode fiber amplifier, and a 1.1–2.2 μm wideband supercontinuum(SC) with an average power of 205 m W was generated in highly nonlinear fiber. The spectrogram of the generated SC was examined both experimentally and numerically. The generated SC was focused into a nonlinear crystal, and stable generation of MIR comb around the 3 μm wavelength region was realized.