Long term performance of recycled concrete beams with different water-cement ratio and recycled aggregate replacement rate

The purpose of this study is to reveal the service performance of recycled aggregate concrete(RAC)components for different values of water-cement ratio and replacement rate of recycled coarse aggregate(RCA).Generally,the concrete strength decreases with the increase of the replacement rate of RCA,in order to meet the strength requirements when changing the replacement rate of RCA,it is necessary to change the water-cement ratio at the same time.Therefore,the axial compressive strengths of prism with 25 mix proportions,the short-term mechanical properties and long-term deformation properties of reinforced concrete beams were tested respectively by changing water-cement ratio and RCA replacement rate.The bearing capacity and the strain nephogram of samples under different loads were obtained using the Digital Image Correlation(DIC)method,and a self-made gravity loading experimental device was used for long-term deformation investigation.Results showed that the damage pattern of RAC was the same as that of natural aggregate concrete(NAC),but the brittleness was more pronounced.The brittleness of concrete before failure can be reduced more effectively by adjusting the replacement rate of RCA than by adjusting the water-cement ratio.The water-cement ratio has an evident influence on the axial compressive strength and early creep of concrete,while the replacement rate of RCA has a remarkable effect on the long-term deformation of the concrete beams.

Effects of the Water-Cement Ratio and the Molding Temperature on the Hydration Heat of Cement

The effects of the water-cement ratio and the molding temperature on the hydration heat of cement were investigated with semi-adiabatic calorimetry.The specimens were prepared with water-cement ratios of 0.31,0.38,and 0.45,and the molding temperature was specified at 10 and 20℃.The experimental results show that,as the water-binder ratio increases,the value of the second temperature peak on the temperature curve of the cement paste decreases,and the age at which the peak appears is delayed.The higher the water-cement ratio,the higher the hydration heat release in the early period of cement hydration,but this trend reverses in the late period.There are intersection points of the total hydration heat curve of the cement pastes under the influence of the water-cement ratio,and this law can be observed at both molding temperatures.With the increase in the molding temperature,the age of the second temperature peak on the temperature curve of the cement paste will advance,but the temperature peak will decrease.The higher the molding temperature,the earlier the acceleration period of the cement hydration began,and the larger the hydration heat of the cement in the early stage,but the smaller the total heat in the late period.A subsection function calculation model of the hydration heat,which was based on the existing models,was proposed in order to predict the heat of the hydration of the concrete.

Effects of Water-cement Ratio and Hydration Heat Regulating Materials on Hydration Process of Early-age Cementitious Materials

By means of low-field nuclear magnetic resonance(LF-NMR),the transverse relaxation time(T_(2))signals of physically bound water in cement paste were monitored to indicate water content change and characterize the early-age hydration process.With the curves of the T_(2)signals and hydration time obtained,the hydration process could be divided into four typical periods using the null points of the second derivative curve,and the influences of water-cement ratio(w/c)and hydration heat regulating materials(HHRM)on hydration process were analyzed.The experimental results showed that the hydration rate of pure cement paste in accelerated period presented a positive correlation with w/c.Compared to pure cement paste,the addition of HHRM extended all four periods,and led to a much faster hydration rate in initial period as well as a slower rate in accelerated period.Finally,according to the LFNMR test results,the early-age hydration model of cementitious materials was proposed considering w/c and HHRM content.

MOLECULAR BEAM STUDIES ON OXIDATION OF CO ON Pd WITH DIFFERENT MIXED RATIOS OF P_(CO) TO P_(O2) ~*

Here some steady-state experiments on oxidation of CO on Pd were performed on a molecular beam apparatus. It is found that the characteristics of the rate of CO_2 formation r versus substrate temperature T are dependent on the ratio P=P_(CO)/P_(O2) in the mixed beam. These characteristics are related to the complicated interactions of co-adsorbed CO and O particles on Pd surface.

The Impact of Different Mining and Releasing Ratios on the Over-Support Pressure of Header Working Face

Through the theoretical analysis of overburden destabilization mechanism, FLAC 3D simplified plane numerical simulation method and field measurement method, we compared the relationship of overburden support pressure at 35 m of workface recovery, and the peak overburden support pressure decreased from 13.85 Mpa to 11.97 Mpa from 1:1 to 1:3. With the increase of mining ratio, the peak over-supporting pressure decreases: with the increase of top coal recovery thickness, the peak over-supporting pressure and the influence range will be further expanded, and the distance between the peak over-supporting pressure and the coal wall of the working face will be further increased and the high stress zone of the peak area will be expanded simultaneously.

Experimental study on expansion and cracking properties of static cracking agents in different assembly states

Rolled static cracking agent(RSCA)can solve the intractable problem of traditional bulk static cracking agent(BSCA)in engineering applications.This paper innovatively studies the rational water-cement ratio of BSCA and the immersion soaking time of RSCA under the condition of controlling temperature.Through the expansion and cracking performance experiments,the development characteristics of expansion pressure,the cracking effect of the single-hole specimen and the performance of hole spraying prevention under the action of BSCA and RSCA were compared and analyzed.The results show that:(1)The volume growth rate of static cracking agent decreases with the increase of water-cement ratio,and the fluidity increases with the increase of water-cement ratio.The rational water-cement ratio for BSCA application is 0.3,and the rational immersion time of RSCA is 2-2.5 min;(2)Under the bore diameters of 30,35,40 and 45 mm,the expansion pressure of BSCA with a water-cement ratio of 0.3 is 38.2,52.3,61.5 and 68 MPa,and the expansion pressure of RSCA immersed in water for 2.5 min is 43.5,58.8,69.5 and 75.1 MPa,respectively.Among them,the development speed of expansion pressure of BSCA is higher than that of RSCA,and the arrival time of the peak expansion pressure of RSCA is 1.7 times that of BSCA;(3)The crack initiation speed of single-hole specimen under the action of RSCA is 10.3%lower than that under the action of BSCA,but the cracking speed of the former is 72.6%higher than that of the latter;(4)The hole spraying occurs in BSCA under the bore diameter of 50,55 and 60 mm,while the hole spraying occurs in RSCA under the bore diameter of 60 mm.In terms of bore diameter,the hole spraying prevention of the RSCA is better than that of BSCA.The research results enrich the static blasting technology and provide data support and theoretical reference for field application.

Contacted Ion Pairs in Aqueous CuCl2 by the Combination of Ratio Spectra, Difference Spectra, Second Order Difference Spectra in the UV-Visible Spectra

The microstructure of aqueous CuCl2 has been studied through lots of technologies for many years; however, it remains a controversial subject. In this study, a new spectroscopic method has been proposed to analyze the UV-visible spectra of thin fihn of CuCl2/H2O solutions at different concentrations. This method is the combination of ratio spectra, difference spectra and second order difference spectra. By using this method, two new bands at -230 and -380 nm are obviously observed. The bands are assigned as the contacted ion pairs [CuCl3（H2O）n]- or [CuCl4（H2O）n]2-, which demonstrates that ion pairs exist in the CuCl2/H2O solution. Such finding agrees with the recent theoretical spectra obtained by time-dependent density functional theory. Furthermore, the populations of the contacted ion pairs are discussed. This study not only offers the direct spectroscopic evidence of [CuCl3（H2O）n]- or [CuCl4（H2O）n]2- in aqueous CuCl2, but also suggests that the spec- troscopic analysis method is powerful to extract the weak bands in a strong overlapping spectrum.

A Comparative Study of the Novel Ratio Difference Method versus Conventional Spectrophotometric Techniques for the Analysis of Binary Mixture with Overlapped Spectra

The smart novel ratio difference spectrophotometric method was developed and validated for the determination of a binary mixture of Sodium cromoglicate (SCG) and Fluorometholone (FLU) in presence of benzalkonium chloride without prior separation. The results were compared to that of the conventional methods (dual wavelength and first derivative of ratio spectra). The suggested methods were validated in compliance with the ICH guidelines and were successfully applied for determination of SCG and FLU in their laboratory prepared mixtures and commercial ophthalmic solution. The novel method showed significant advantages over the conventional methods regarding simplicity, minimal data manipulation and maximum reproducibility and robustness;which enabled the analysis of binary mixtures with overlapped spectra for routine quality control testing with quite satisfactory.

A Comparative Study on the Excitation of Large Volume Airgun Source with Different Combinations in Hutubi,Xinjiang,China

In order to study the excitation of large-volume airgun source with different combinations in Hutubi,Xinjiang,China,we conducted a targeted experiment.The method of timefrequency analysis is used to study the signals recorded by a seismometer on the shore of the excited pool,and it is concluded that different gun combinations will lead to different frequency of bubble pulse signals.Besides,linear combination method is used to analyze the signal-to-noise ratios of signals excited by different gun combinations which was recorded by seismic stations around the airgun source.In order to improve the signal-tonoise ratios,it is more effective to increase the activation energy(the number of excited guns at the same time)than to stack the excited signals with smaller energy repeatedly.

Tidal harmonic analysis of TOPEX/POSEIDON data in the Northwest Pacific by introducing difference-ratio relations

The difference-ratio relations are introduced to separate tidal constituents that are aliaseddue to the sampling interval and sampling span of the TOPEX/POSEIDON altimeter. It is found that some tidal constituents such as K_1 and SSA, though aliased at along track points, are not aliased at crossover points beeause the data at crossover points are double those at along track points. So the harmonic analysis method can be employed directly for the analysis of time series at crossover points. Then the difference-ratio relations from crossover points are introduced to analyze the time series at along track points. The TOPEX/POSEIDON data in the Northwest Pacific are analyzed with this method. The results from this method agree well with tidal constants from tidal gauges.

A nuclear density probe:isobaric yield ratio difference

We report our recent progress on the nuclear symmetry energy probe,which is called the isobaric yield ratio difference(IBD),and its application in neutron density determination in experiments.The results obtained by the IBD,from which the isobaric yields in the measured 140 A MeV ^(40.48)Ca + ~9Be and ^(58.64)Ni + ~9Be reactions,and the calculated 80 A MeV ^(38-52)Ca +^(12)C reactions by using a modified statistical abrasion-ablation model,show the sensitivity of the IBD to the density differences between reactions.

Retrospective analysis of two northern California wild-land fires via Landsat five satellite imagery and Normalized Difference Vegetation Index (NDVI)

Wild-land fires are a dynamic and destructive force in natural ecosystems. In recent decades, fire disturbances have increased concerns and awareness over significant economic loss and landscape change. The focus of this research was to study two northern California wild-land fires: Butte Humboldt Complex and Butte Lightning Complex of 2008 and assessment of vegetation recovery after the fires via ground based measurements and utilization of Landsat 5 imagery and analysis software to assess landscape change. Multi-temporal and burn severity dynamics and assessment through satellite imagery were used to visually ascertain levels of landscape change, under two temporal scales. Visual interpretation indicated noticeable levels of landscape change and relevant insight into the magnitude and impact of both wild-land fires. Normalized Burn Ratio (NBR) and delta NBR (DNBR) data allowed for quantitative analysis of burn severity levels. DNBR results indicate low severity and low re-growth for Butte Humboldt Complex “burned center” subplots. In contrast, DNBR values for Butte Lightning Complex “burned center” subplots indicated low-moderate burn severity levels.

Influence of Chemical Effect on the Kβ/Kα Intensity Ratios and Kβ Energy Shift of Co, Ni, Cu, and Zn Complexes

Chemical effects on the Kβ/Kα intensity ratios and △E energy differences for Co, Ni, Cu, and Zn complexes were investigated. The samples were excited by 59.5 keV γ-rays from a ^241Am annular radioactive source. K X-rays emitted by samples were counted by an Ultra-LEGe detector with a resolution of 150 eV at 5.9 keV. We observed the effects of different ligands on the Kβ/Kα intensity ratios and △E energy differences for Co, Ni, Cu, and Zn complexes. We tried to investigate chemical effects on central atoms using the behaviors of different ligands in these complexes. The experimental values of Kβ/Kα were compared with the theoretical and other experimental values of pure Co, Ni, Cu, and Zn.

Application of A New Spectrophotometric Method Manipulating Ratio Spectra for Determination of Bambuterol Hydrochloride in the Presence of Its Degradation Product Terbutaline

A simple,specific,accurate and precise spectrophotometric stability indicating method is developed for determination of bambuterol hydrochloride(BH)in the presence of its degradation product terbutaline(TERB)and in pharmaceutical formulations.A newly developed spectrophotometric method called ratio difference method by measuring the difference in amplitudes between 245 and 260nm of ratio spectra.The calibration curves are linear over the concentration range of 0.1~1mg·mL-1 for BH and 0.1~0.7mg·mL-1 for TERB with mean percentage recovery of 100.56±0.751 and 99.88±1.183,respectively.The selectivity of the proposed method is checked using laboratory prepared mixtures.The proposed method has been successfully applied to the analysis of BH in pharmaceutical dosage forms without interference from other dosage form additives and the results have been statistically compared with pharmacopeial method.

A mass-conserved multiphase lattice Boltzmann method based on high-order difference

The Z–S–C multiphase lattice Boltzmann model [Zheng, Shu, and Chew(ZSC), J. Comput. Phys. 218, 353(2006)]is favored due to its good stability, high efficiency, and large density ratio. However, in terms of mass conservation, this model is not satisfactory during the simulation computations. In this paper, a mass correction is introduced into the ZSC model to make up the mass leakage, while a high-order difference is used to calculate the gradient of the order parameter to improve the accuracy. To verify the improved model, several three-dimensional multiphase flow simulations are carried out,including a bubble in a stationary flow, the merging of two bubbles, and the bubble rising under buoyancy. The numerical simulations show that the results from the present model are in good agreement with those from previous experiments and simulations. The present model not only retains the good properties of the original ZSC model, but also achieves the mass conservation and higher accuracy.

Digit Ratio Predicts Spatial Memory Performance in Women

The ratio of the length of the 2nd and 4th digits of the hand is an indicator of prenatal testosterone exposure and has been shown to be a within sex correlate of various abilities, such as visuo-spatial processing in men. However, a number of studies report such links also exist in women, whilst others show no link for either sex. Using a unique paradigm that sub-divides visuo-spatial processing into a distinct subset of component skills we found a strong correlation between finger ratio and spatial memory performance specifically under stereo viewing conditions in women. We argue that the current ambiguity regarding links between digit-ratio and visuo-spatial ability is the result of a lack of clarity between the component skills recruited in different visuo-spatial tasks. Our task independently tested a subset of the component skills used in visuo-spatial tasks such as: mental rotation, cross-dimensionality processing and feature detection. Our results show that digit-ratio, a physical parameter linked to prenatal testosterone levels, indicates performance on a distinct aspect of visuo-spatial processing in women, without contradicting previous links for visuo-spatial processing in men. These results offer an explanation for the differences in previous findings linking visuo-spatial processing in both men and women.

A Problem of Testing Homogeneity Against Order Constraints on Risk Differences

Consider I pairs of independent binomial variates x0i and x1i with corresponding parameters P0i and p1i and sample sizes n0i and n1i for i=1, …,I. Let △i = P1i-P0i be the difference of the two binomial parameters, where △i’s are to be of interest and P0i’s are nuisance parameters. The null hypothesis of homogeneity on the risk difference can be written as

Analogy Theory and Application of Pressure Difference of Wind Turbine Blade Profile

This paper aims to design an optimized blade for Horizontal Axis Wind Turbine(HWAT).Since airfoil is a basic component of blade design,an optimized airfoil(referred as SJX)was proposed based on the line theory through the weight analogy to pressure distribution of air flow.Its lift,drag,lift⁃to⁃drag ratio were compared with those NACA2409⁃34,NACA2410,and RK40 airfoils by using Profili software at fixed wind velocity and under different angles of attack.The NACA2409⁃34 airfoil was found to be greatly similar with the SJX airfoil.Based on the Wilson method,blades using SJX and NACA2490⁃34 airfoils were developed and different performance parameters such as velocity distribution,pressure distribution,and power were compared under variable wind velocities and different angles of attack ranging from-4°to 6°at different radius from the center of rotor using computational fluid dynamics(CFD)in ANSYS FLUENT.Results of the study suggested that the performance of the SJX based airfoil and blade was much more optimized.

Association between Systolic Blood Pressure Difference ≥10 mm Hg and Ankle-Brachial Index

Background: In new outpatients, blood pressure should be measured in both arms. A previous study reported that an inter-arm systolic blood pressure difference (ΔSBP) of ≥10 mm Hg is associated with an increased risk of mortality. Aim: The aim was to identify the associations with absolute values of ΔSBP (|ΔSBP|) ≥10 mm Hg. Subjects and Methods: This study included 2481 patients. Patients with a body mass index ≥25 kg/m2 were defined as obese. The group of A was defined as following: ankle-brachial index (ABI) was <0.9 or ≥1.3. ΔSBP was expressed as right arm BP minus left arm BP. |ΔSBP| ≥10 mm Hg were analyzed using multivariate logistic analysis. Results: |ΔSBP| ≥10 mm Hg was found in 6.0% of patients and |ΔSBP| < 5 mm Hg in 80.4%. In multivariate analysis, the odds ratios (ORs) of the associations with |ΔSBP| ≥10 mm Hg were significantly associated with abnormal ABI and obesity regardless of sex and age. Moreover, the OR of the combined effects of abnormal ABI and obesity was higher than that of abnormal ABI and obesity alone. Conclusion: |ΔSBP| ≥10 mm Hg was associated with abnormal ABI and obesity. In a primary care setting, blood pressure should be actively measured in both arms. This study suggests that the associations with |ΔSBP| ≥10 mm Hg may be a useful part of screening for abnormal ABI.

Preparation and Optimization of Mix ratio for C50T Girder Manufactured Sand and Concrete

Considering actual construction conditions of Binchuan-Heqing Highway,this paper provides the C50 mix ratio conforming to engineering requirements by strictly controlling the quality of raw materials,optimizing the design of mix ratio scientifically,preparing superior C50 concrete 0 with manufactured sand,and optimizing the concrete mix ratio based on the adjustment of fly ash replacement,water-cement ratio,polycarboxylate-type water reducer mixing amount,sand ratio,etc.The result indicates that,the water-cement ratio has a great influence on the concrete strength,and if the ratio of coal ash is high in the binding material,the early compressive strength of the concrete will increase slowly.