总结和分析了地表形变D-InSAR监测的主要方法和当前所面临的主要问题。针对常规D-InSAR技术中大气相位和低相干区域相位解缠,分别介绍了基于Delaunay三角网的不规则格网解缠方法、累积干涉纹图处理方法(Stack ing Interferogram s)、永...总结和分析了地表形变D-InSAR监测的主要方法和当前所面临的主要问题。针对常规D-InSAR技术中大气相位和低相干区域相位解缠,分别介绍了基于Delaunay三角网的不规则格网解缠方法、累积干涉纹图处理方法(Stack ing Interferogram s)、永久性散射体(PS)技术以及角反射器干涉测量(CR-InSAR)方法,分析了各自的适用条件和优缺点。此外,对有限数据量条件下低相干区域大气相位校正和相干目标识别等问题进行了重点讨论。立足于工程应用需要,分别对D-InSAR测量地表形变的参数要求、测量结果的精度验证、D-InSAR测量值与形变的关系、大区域处理以及形变场时空演变等问题进行了分析和讨论。展开更多
Due to the difficulties in obtaining large deformation mining subsidence using differential Interferometric Synthetic Aperture Radar （D-InSAR） alone, a new algorithm was proposed to extract large deformation mining ...Due to the difficulties in obtaining large deformation mining subsidence using differential Interferometric Synthetic Aperture Radar （D-InSAR） alone, a new algorithm was proposed to extract large deformation mining subsidence using D-InSAR technique and probability integral method. The details of the algorithm are as follows：the control points set, containing correct phase unwrapping points on the subsidence basin edge generated by D-InSAR and several observation points （near the maximum subsidence and inflection points）, was established at first; genetic algorithm （GA） was then used to optimize the parameters of probability integral method; at last, the surface subsidence was deduced according to the optimum parameters. The results of the experiment in Huaibei mining area, China, show that the presented method can generate the correct mining subsidence basin with a few surface observations, and the relative error of maximum subsidence point is about 8.3%, which is much better than that of conventional D-InSAR （relative error is 68.0%）.展开更多
文摘总结和分析了地表形变D-InSAR监测的主要方法和当前所面临的主要问题。针对常规D-InSAR技术中大气相位和低相干区域相位解缠,分别介绍了基于Delaunay三角网的不规则格网解缠方法、累积干涉纹图处理方法(Stack ing Interferogram s)、永久性散射体(PS)技术以及角反射器干涉测量(CR-InSAR)方法,分析了各自的适用条件和优缺点。此外,对有限数据量条件下低相干区域大气相位校正和相干目标识别等问题进行了重点讨论。立足于工程应用需要,分别对D-InSAR测量地表形变的参数要求、测量结果的精度验证、D-InSAR测量值与形变的关系、大区域处理以及形变场时空演变等问题进行了分析和讨论。
基金Project (BK20130174) supported by the Basic Research Project of Jiangsu Province (Natural Science Foundation) Project (1101109C) supported by Jiangsu Planned Projects for Postdoctoral Research Funds,China+1 种基金Project (201325) supported by the Key Laboratory of Geo-informatics of State Bureau of Surveying and Mapping,ChinaProject (SZBF2011-6-B35) supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘Due to the difficulties in obtaining large deformation mining subsidence using differential Interferometric Synthetic Aperture Radar （D-InSAR） alone, a new algorithm was proposed to extract large deformation mining subsidence using D-InSAR technique and probability integral method. The details of the algorithm are as follows：the control points set, containing correct phase unwrapping points on the subsidence basin edge generated by D-InSAR and several observation points （near the maximum subsidence and inflection points）, was established at first; genetic algorithm （GA） was then used to optimize the parameters of probability integral method; at last, the surface subsidence was deduced according to the optimum parameters. The results of the experiment in Huaibei mining area, China, show that the presented method can generate the correct mining subsidence basin with a few surface observations, and the relative error of maximum subsidence point is about 8.3%, which is much better than that of conventional D-InSAR （relative error is 68.0%）.
