STUDY ON DIFFUSION WELDING OF ALUMINIUN MATRIX COMPOSITE

Effects of diffusion welding parameters on strength of welded joint based on particle reinforced alumini- um matrix composite Al2O3p/6061Al were studied by comparing with aluminium matrix alloy,Mecha- nism for the loss of joint strength was analyzed.It was pointed out that the key processing parameters affecting the strength of joint was the welding temperature.The high quality joint can be successfully obtained with appropriate diffusion welding parameters.

Diffusion Bonding of Silicon Carbide Particulate Reinforced 2024 Al Composites

A study has been made on diffusion bonding of SiCp/2024Ai composites by means of pure Al interlayer. In the condition of TB=843 K, PB=16 MPa, tB= 60 min, the diffusion bonded joint, with a shear strength of 235 MPa, was obtained when a 15 μm thick interlayer was used. The results of the shear testing and SEM indicate that fracture of the joint presented characteristics of ductile rupture.

A method for preparing composite diffusion coating alloy on ceramic surface

Metallization of the ceramic surfaces of Si3N4 and Al2O3 was carried out in a composite diffusion coating vacuum furnace using a Ti-Cu composite target. The experimental process and influencing factors were discussed. Optical microscope （OM） , energy dispersive spectroscopy （EDS） , scanning electron microscopy （SEM） , X-ray diffusion （XRD） and sound emissive scratch test （SEST） were applied to evaluate the alloy layer formed on the ceramic surface. It was indicated that the diffusion coating alloy layer contained Cu, Ti, Fe, Al and Si etc. XRD result indicated that the diffusion coating alloy layer was composed of CuTi2, Cu, Si2 Ti and CuTi, Al2 TiO5 , Ti3O5. It was found that the diffusion coating alloy layer got bonded with ceramic well, and no spaUation occurred under the maximum load of 100 N. Deposited Si3N4 ceramic was welded with Q235 and the joining quality was examined. Robust joint was formed between Si3N4 ceramic/Q235. This present method has advantages in high efficiency and low cost and provides a new approach for producing ceramic and metal bond.

An Optical Investigation of Silver Nanoclusters Composite Soda-lime Glass Formed by Electric Field Assisted Diffusion

Silver nanoclusters（NCs） embedded in soda-lime glass was synthesized by the electric fieldassisted diffusion（EFAD） and successive annealing. The samples were characterized by UV-Vis absorption spectroscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy（XPS）, and lifetime measurements. The experimental results show that the growth of silver clusters is favored by the annealing temperature and dwell time. The as-diffused and annealed glass samples show photoluminescence around 550 nm under UV excitation, which can be associated with the presence of L-center and Ag3~＋ cluster. And the increasing of the annealing temperature and dwell time results in an appearance of the SPR peak and the decreasing of the luminescence intensities because the Ag3~＋ clusters grow up into the Ag nanoparticles.

Humidity Diffusion on Jute/Polyester Laminated Composites and Its Effects on Mechanical Properties

Jute is a natural fiber widely used as reinforcement in composites due to its high tensile strength and stiffness,but they can easily absorb water and have their physical properties compromised.The water absorption properties of jute/polyester composites are evaluated according to ASTM D 570 and the effect of humidity in the composite mechanical behavior is also analyzed.The composite showed a pseudo-Fickian behavior and gained 13.37%in weight after the test.It also lost tensile strength and elasticity modulus,and increased its specific deformation.Scanning electron microscope images showed that wet specimens were more subject to cracks,voids and fiber pullout than dry specimens.Failures produced by water diffusion in composite and polymer plasticization,added to breakdown in the fibers’cellulosic structures,justify the change in mechanical properties due to water absorption.

Effects of Positron Diffusion and Its Application in Composite System

The effects of positron diffusion on the measured S parameter have been investigated by a point-source diffusion model and a δ function method. Firstly, the theoretical analyses of the effects are presented for the samples of a homogeneous semi-infinite medium and a film of definite thickness. Then the results are used to analyze the S parameters in several composite systems and interface models.

Electroanalytical studies on electrically conductive polyaniline： Nylon-6,6 composite film

Electrically conductive composite films ofpolyaniline and nylon-6.6 are prepared by diffusing aniline followed by oxidative polymerization of aniline into nylon-6.6 matrix. In order to determine the diffusion coefficient for the chloride ion diffusion into the composite matrix electrochemically, galvanostatic pulse method is used and the diffusion coefficient is estimated to be -6.48× 10^-17 cm^2s^-1. The results are discussed in view of them being potential replacement materials for battery. electrodes and sensors devices.

Remote Sensing Image Registration Based on Improved KAZE and BRIEF Descriptor

Remote sensing image registration is still a challenging task owing to the significant influence of nonlinear differences between remote sensing images.To solve this problem,this paper proposes a novel approach with regard to feature-based remote sensing image registration.There are two key contributions:1)we bring forward an improved strategy of composite nonlinear diffusion filtering according to the scale factors in multi-scale space and 2)we design a gradually decreasing resolution of multi-scale pyramid space.And a binary code string is served as feature descriptors to improve matching efficiency.Extensive experiments of different categories of remote image datasets on feature extraction and feature registration are performed.The experimental results demonstrate the superiority of our proposed scheme compared with other classical algorithms in terms of correct matching ratio,accuracy and computation efficiency.

Thermal Properties of Mg–Al/AlN Composites Fabricated by Powder Metallurgy

Magnesium matrix composites reinforced with AlN particles were fabricated by the powder metallurgy technique.Different mixing methods were used in this study to control the distribution of Al N particles.The microstructure,thermal diffusivity and thermal expansion of the Mg–Al/Al N composites using different mixing methods were investigated.The results showed that the intergranular and intragranular distributions of Al N particles were obtained,respectively,by controlling the mixing methods.The composite with intragranular particles exhibited lower thermal diffusivity because of the existences of more interfaces,defects and grain boundaries,which acted as scattering centers and reduced the mean free path of electrons and phonons.The existence of Al N particles lowered the coefficient of thermal expansion（CTE）and enhanced the dimensional stability of the composites.And the use of the improved mixing method further reduced the CTE of Mg–Al/Al N composites.

Preparation of SiC Fiber Reinforced Nickel Matrix Composite

A method of preparing continuous（Al＋Al2O3）-coated SiC fiber reinforced nickel matrix composite was presented,in which the diffusion between SiC fiber and nickel matrix could be prevented.Magnetron sputtering is used to deposit Ni coating on the surface of the（Al＋Al2O3）-coated SiC fiber in preparation of the precursor wires.It is shown that the deposited Ni coating combines well with the（Al＋Al2O3） coating and has little negative effect on the tensile strength of（Al＋Al2O3）-coated SiC fiber.Solid-state diffusion bonding process is employed to prepare the（Al＋Al2O3）-coated SiC fiber reinforced nickel matrix with 37% fibers in volume.The solid-state diffusion bonding process is optimized and the optimum parameters are temperature of 870,pressure of 50 MPa and holding time of 2 h.Under this condition,the precursor wires can diffuse well,composite of full density can be formed and the（Al＋Al2O3） coating is effective to restrict the reaction between SiC fiber and nickel matrix.