Ti(C,N)基金属陶瓷显微组织及相界面较复杂,需要一种简便、精确的定量金相方法来辅助研究.采用功能强大的Gatan Digital Micrograph软件对不同纳米添加量Ti(C,N)基金属陶瓷显微组织进行背底消除、滤波、二值化及图像形态学处理,分析可...Ti(C,N)基金属陶瓷显微组织及相界面较复杂,需要一种简便、精确的定量金相方法来辅助研究.采用功能强大的Gatan Digital Micrograph软件对不同纳米添加量Ti(C,N)基金属陶瓷显微组织进行背底消除、滤波、二值化及图像形态学处理,分析可得到该金相图中的一些金相特征参数.对不同纳米添加量Ti(C,N)基金属陶瓷中硬质相进行了综合分析,结果表明,利用Gatan Digi-tal Micrograph软件实现Ti(C,N)基金属陶瓷显微组织的分析测量是完全可行的,能有效地提高工作效率及得到直观、准确的结果,也可定量地得到随纳米粉添加量的不断增加,硬质相颗粒的总体积不断减少,平均粒径也在不断减小.展开更多
With the development on high-speed integrated circuit,fast high resolution sampling ADC and digital signal processors are replacing analog shaping amplifier circuit.This paper firstly presents the numerical analysis a...With the development on high-speed integrated circuit,fast high resolution sampling ADC and digital signal processors are replacing analog shaping amplifier circuit.This paper firstly presents the numerical analysis and simulation on R-C shaping circuit model and C-R shaping circuit model.Mathematic models are established based on 1st order digital differential method and Kirchhoff Current Law in time domain,and a simulation and error evaluation experiment on an ideal digital signal are carried out with Excel VBA.A digital shaping test for a semiconductor X-ray detector in real time is also presented.Then a numerical analysis for Sallen-Key(S-K) low-pass filter circuit model is implemented based on the analysis of digital R-C and digital C-R shaping methods.By applying the 2nd order non-homogeneous differential equation,the authors implement a digital Gaussian filter model for a standard exponential-decaying signal and a nuclear pulse signal.Finally,computer simulations and experimental tests are carried out and the results show the possibility of the digital pulse processing algorithms.展开更多
New requirements have been put forward by the age of "Internet+" to improve the abilities of reform,transformation and innovation for traditional carpet industry in combining the technology of the fully digi...New requirements have been put forward by the age of "Internet+" to improve the abilities of reform,transformation and innovation for traditional carpet industry in combining the technology of the fully digital fabric tufting and the system of networked intelligent customization that forms C2B mode of personalized customization of the digital carpet to promote the carpet industry to develop towards individuation,intelligence and high efficiency. Exploring the market background of C2B mode of intelligent customization of the digital carpet and developing the technology of the fully digital fabric tufting makes it possible to achieve personalized customization of the digital carpet. The industrial internet which is integrated by a lot of robots of the fully digital fabric tufting will change completely traditional carpet industry.展开更多
A digital arc welding power supply was designed with the advanced reduced instruction set computer machine （ARM） and embedded real-time multi-task operating system micro C/OS- Ⅱ. The ARM, with its powerful calculat...A digital arc welding power supply was designed with the advanced reduced instruction set computer machine （ARM） and embedded real-time multi-task operating system micro C/OS- Ⅱ. The ARM, with its powerful calculating speed and complete peripheral equipments, is very suitable to work as the controller of the digital power supply. The micro C/OS- Ⅱ transplanted in ARM, helps to improve the respondent speed against various welding signals, as well as the reliability of the controlling software. The welding process consists of nine tasks. The tasks of great significance on reliability of the welder, for example, the A/D conversion of current and voltage, enjoy top priority. To avoid simultaneous-sharing on A/D converter and LCD module, two semaphores are introduced in to ensure the smooth performance of the welding power supply. Proven by experiments ,the ARM and the micro C/OS- Ⅱ can greatly improve both the respondent speed and the reliability of the digital welder.展开更多
The digital excitation regulator is very popular in the small electric plant. This kind of regulator can im- prove the working condition of generator and its working efficiency. It is on the base of the 80C51 Micro-co...The digital excitation regulator is very popular in the small electric plant. This kind of regulator can im- prove the working condition of generator and its working efficiency. It is on the base of the 80C51 Micro-con- troller. The regulator can automatically finish some functions through the combination of software and hard- ware. Through the experiment we can know it is more intellectual than the traditional analog excitation regu- lator.展开更多
The cultivation of innovative and entrepreneurial capability is a quality requirement of the times for the training of college and university talents. However, the regular teaching system universally has such problems...The cultivation of innovative and entrepreneurial capability is a quality requirement of the times for the training of college and university talents. However, the regular teaching system universally has such problems as much more emphasis on theory than on practice, much more emphasis on inheritance than on innovation, and mismatching between talent training and market demand, so that a great number of graduates do not have enough innovative capacity, and it is very difficult for them to engage in related jobs of software engineering steadily and permanently. By investigating and analyzing similar majors of more than 20 schools at home and abroad, this article proposes a teaching system of talent training of the 3 C-cored major of "innovative and entrepreneurial" software engineering(digital media technology) based on regions, oriented to the industry and marked by school-enterprise linkage, and in connection with the characteristics of college and university education.展开更多
The design of this paper is to present the first installment of a complete and final theory of rational human intelligence. The theory is mathematical in the strictest possible sense. The mathematics involved is stric...The design of this paper is to present the first installment of a complete and final theory of rational human intelligence. The theory is mathematical in the strictest possible sense. The mathematics involved is strictly digital—not quantitative in the manner that what is usually thought of as mathematics is quantitative. It is anticipated at this time that the exclusively digital nature of rational human intelligence exhibits four flavors of digitality, apparently no more, and that each flavor will require a lengthy study in its own right. (For more information,please refer to the PDF.)展开更多
the system to DC voltage source as the core, AT89C52 MCU as the main controller, the output voltage to set the DC power supply through the keyboard, with a step function voltage to reality, the actual output value. Th...the system to DC voltage source as the core, AT89C52 MCU as the main controller, the output voltage to set the DC power supply through the keyboard, with a step function voltage to reality, the actual output value. This design is divided into four modules： SCM control and display module, digital to analog （D/A） conversion module, a constant voltage source module, output module. MCU control module as the core, the input signal is converted to digital quantity output; constant current source module voltage D/A conversion to analog conversion into constant pressure through a constant voltage circuit. The system has good reliability, high precision.展开更多
The article describes the digital instrumentation and control system for unit 5 ＆ 6 of YangJiang NPP, involving the overall I ＆ C （instrumentation and control） structure, the basic requirements and independent ver...The article describes the digital instrumentation and control system for unit 5 ＆ 6 of YangJiang NPP, involving the overall I ＆ C （instrumentation and control） structure, the basic requirements and independent verification and validation. Advanced I ＆ C systems for YangJiang NPPs have to meet increasing demands for safety and availability. Additionally, the specific requirements coming from the nuclear qualification have to be fulfilled.展开更多
Rheumatoid arthritis is a chronic multisystem disease of unknown cause. The characteristic feature of RA is persistent inflammatory synovitis. The natural history of disease is such that the early months of the diseas...Rheumatoid arthritis is a chronic multisystem disease of unknown cause. The characteristic feature of RA is persistent inflammatory synovitis. The natural history of disease is such that the early months of the disease are critical period during which reversible joint damage occurs. So early diagnosis of RA and appropriate drug application is the only way to save a patient from this crippling disease. In India, the cost of investigations is a significant factor for most of the patients. Ultrasonography or Power Doppler Ultra Sound (PDUS) has the advantage of being economic in spite of its sensitivity in assessing both inflammatory and destructive changes. The aim of the present study was to evaluate the diagnostic efficiency of PDUS in early rheumatoid arthritis. The study was performed with the patients attending Rheumatology Clinic. A total number of 106 patients of clinically suspected rheumatoid arthritis were studied as per selection criteria. Radiological examinations of hands were done by digital radiography and PDUS in a group of 53 patients, assessment of foot changes by PDUS and Digital Radiography were done in another similar group of 53 patients. Final diagnosis by ACR EULAR-2010 criteria is done for all the patients. The comparative study reveals that synovial vascularity as demonstrated by PDUS is much more effective in diagnosing early rheumatoid arthritis, both in hand and in feet than digital radiograph. PDUS of feet may yield earlier and better findings than hands, which is conventionally used in patients suffering from early rheumatoid arthritis.展开更多
文摘Ti(C,N)基金属陶瓷显微组织及相界面较复杂,需要一种简便、精确的定量金相方法来辅助研究.采用功能强大的Gatan Digital Micrograph软件对不同纳米添加量Ti(C,N)基金属陶瓷显微组织进行背底消除、滤波、二值化及图像形态学处理,分析可得到该金相图中的一些金相特征参数.对不同纳米添加量Ti(C,N)基金属陶瓷中硬质相进行了综合分析,结果表明,利用Gatan Digi-tal Micrograph软件实现Ti(C,N)基金属陶瓷显微组织的分析测量是完全可行的,能有效地提高工作效率及得到直观、准确的结果,也可定量地得到随纳米粉添加量的不断增加,硬质相颗粒的总体积不断减少,平均粒径也在不断减小.
基金Supported by Shanghai Synchrotron Radiation Facility project
文摘With the development on high-speed integrated circuit,fast high resolution sampling ADC and digital signal processors are replacing analog shaping amplifier circuit.This paper firstly presents the numerical analysis and simulation on R-C shaping circuit model and C-R shaping circuit model.Mathematic models are established based on 1st order digital differential method and Kirchhoff Current Law in time domain,and a simulation and error evaluation experiment on an ideal digital signal are carried out with Excel VBA.A digital shaping test for a semiconductor X-ray detector in real time is also presented.Then a numerical analysis for Sallen-Key(S-K) low-pass filter circuit model is implemented based on the analysis of digital R-C and digital C-R shaping methods.By applying the 2nd order non-homogeneous differential equation,the authors implement a digital Gaussian filter model for a standard exponential-decaying signal and a nuclear pulse signal.Finally,computer simulations and experimental tests are carried out and the results show the possibility of the digital pulse processing algorithms.
文摘New requirements have been put forward by the age of "Internet+" to improve the abilities of reform,transformation and innovation for traditional carpet industry in combining the technology of the fully digital fabric tufting and the system of networked intelligent customization that forms C2B mode of personalized customization of the digital carpet to promote the carpet industry to develop towards individuation,intelligence and high efficiency. Exploring the market background of C2B mode of intelligent customization of the digital carpet and developing the technology of the fully digital fabric tufting makes it possible to achieve personalized customization of the digital carpet. The industrial internet which is integrated by a lot of robots of the fully digital fabric tufting will change completely traditional carpet industry.
基金Supported by the National Natural Science Foundation of China under Grant No 50575074by the Scientific and TechnologicalProject of Guangdong Province, China, under Grant No 2003A1040310
文摘A digital arc welding power supply was designed with the advanced reduced instruction set computer machine （ARM） and embedded real-time multi-task operating system micro C/OS- Ⅱ. The ARM, with its powerful calculating speed and complete peripheral equipments, is very suitable to work as the controller of the digital power supply. The micro C/OS- Ⅱ transplanted in ARM, helps to improve the respondent speed against various welding signals, as well as the reliability of the controlling software. The welding process consists of nine tasks. The tasks of great significance on reliability of the welder, for example, the A/D conversion of current and voltage, enjoy top priority. To avoid simultaneous-sharing on A/D converter and LCD module, two semaphores are introduced in to ensure the smooth performance of the welding power supply. Proven by experiments ,the ARM and the micro C/OS- Ⅱ can greatly improve both the respondent speed and the reliability of the digital welder.
文摘The digital excitation regulator is very popular in the small electric plant. This kind of regulator can im- prove the working condition of generator and its working efficiency. It is on the base of the 80C51 Micro-con- troller. The regulator can automatically finish some functions through the combination of software and hard- ware. Through the experiment we can know it is more intellectual than the traditional analog excitation regu- lator.
基金supported by Research and Practice on the reform of graduate education and teaching in Jiangsu Province in 2016(JGZZ16_065)
文摘The cultivation of innovative and entrepreneurial capability is a quality requirement of the times for the training of college and university talents. However, the regular teaching system universally has such problems as much more emphasis on theory than on practice, much more emphasis on inheritance than on innovation, and mismatching between talent training and market demand, so that a great number of graduates do not have enough innovative capacity, and it is very difficult for them to engage in related jobs of software engineering steadily and permanently. By investigating and analyzing similar majors of more than 20 schools at home and abroad, this article proposes a teaching system of talent training of the 3 C-cored major of "innovative and entrepreneurial" software engineering(digital media technology) based on regions, oriented to the industry and marked by school-enterprise linkage, and in connection with the characteristics of college and university education.
文摘The design of this paper is to present the first installment of a complete and final theory of rational human intelligence. The theory is mathematical in the strictest possible sense. The mathematics involved is strictly digital—not quantitative in the manner that what is usually thought of as mathematics is quantitative. It is anticipated at this time that the exclusively digital nature of rational human intelligence exhibits four flavors of digitality, apparently no more, and that each flavor will require a lengthy study in its own right. (For more information,please refer to the PDF.)
文摘the system to DC voltage source as the core, AT89C52 MCU as the main controller, the output voltage to set the DC power supply through the keyboard, with a step function voltage to reality, the actual output value. This design is divided into four modules： SCM control and display module, digital to analog （D/A） conversion module, a constant voltage source module, output module. MCU control module as the core, the input signal is converted to digital quantity output; constant current source module voltage D/A conversion to analog conversion into constant pressure through a constant voltage circuit. The system has good reliability, high precision.
文摘The article describes the digital instrumentation and control system for unit 5 ＆ 6 of YangJiang NPP, involving the overall I ＆ C （instrumentation and control） structure, the basic requirements and independent verification and validation. Advanced I ＆ C systems for YangJiang NPPs have to meet increasing demands for safety and availability. Additionally, the specific requirements coming from the nuclear qualification have to be fulfilled.
文摘Rheumatoid arthritis is a chronic multisystem disease of unknown cause. The characteristic feature of RA is persistent inflammatory synovitis. The natural history of disease is such that the early months of the disease are critical period during which reversible joint damage occurs. So early diagnosis of RA and appropriate drug application is the only way to save a patient from this crippling disease. In India, the cost of investigations is a significant factor for most of the patients. Ultrasonography or Power Doppler Ultra Sound (PDUS) has the advantage of being economic in spite of its sensitivity in assessing both inflammatory and destructive changes. The aim of the present study was to evaluate the diagnostic efficiency of PDUS in early rheumatoid arthritis. The study was performed with the patients attending Rheumatology Clinic. A total number of 106 patients of clinically suspected rheumatoid arthritis were studied as per selection criteria. Radiological examinations of hands were done by digital radiography and PDUS in a group of 53 patients, assessment of foot changes by PDUS and Digital Radiography were done in another similar group of 53 patients. Final diagnosis by ACR EULAR-2010 criteria is done for all the patients. The comparative study reveals that synovial vascularity as demonstrated by PDUS is much more effective in diagnosing early rheumatoid arthritis, both in hand and in feet than digital radiograph. PDUS of feet may yield earlier and better findings than hands, which is conventionally used in patients suffering from early rheumatoid arthritis.
