The automation process is a very important pillar for Industry 4.0.One of the first steps is the control of motors to improve production efficiency and generate energy savings.In mass production industries,techniques ...The automation process is a very important pillar for Industry 4.0.One of the first steps is the control of motors to improve production efficiency and generate energy savings.In mass production industries,techniques such as digital signal processing(DSP)systems are implemented to control motors.These systems are efficient but very expensive for certain applications.From this arises the need for a controller capable of handling AC and DC motors that improves efficiency and maintains low energy consumption.This project presents the design of an adaptive control system for brushless AC induction and DC motors,which is functional to any type of plant in the industry.The design was possible by implementing Matlab software and tools such as digital signal processor(DSP)and Simulink.Through an extensive investigation of the state of the art,three models needed to represent the control system have been specified.The first model for the AC motor,the second for the DC motor and the third for the DSP control;this is done in this way so that the probability of failure is lower.Subsequently,these models have been programmed in Simulink,integrating the three main models into one.In this way,the design of a controller for use in AC induction motors,specifically squirrel cage and brushless DC motors,has been achieved.The final model represents a response time of 0.25 seconds,which is optimal for this type of application,where response times of 2e-3 to 3 seconds are expected.展开更多
The modified atomic transformations are constructed and proved.On their basis the new complex analytic wavelets are obtained.The proof of the Fourier transforms existence in L1 and L2 on the basis of the theory of ato...The modified atomic transformations are constructed and proved.On their basis the new complex analytic wavelets are obtained.The proof of the Fourier transforms existence in L1 and L2 on the basis of the theory of atomic functions(AF)are presented.The numerical experiments of digital time series processing and physical analysis of the results confirm the efficiency of the proposed transforms.展开更多
A principle and method of constructing the digital acquisition system is presented in this work,which is convenient for the study on the theories and algorithms of digital nuclear signal processing.The hardware system...A principle and method of constructing the digital acquisition system is presented in this work,which is convenient for the study on the theories and algorithms of digital nuclear signal processing.The hardware system of the digital acquisition system consists of front-end controller,waveform digitizer and PC workstation,on which the software system has been developed based on Visual C++under Windows environment.The alterable-frequency sampling(AFS)algorithm and the alterable-frequency trapezoidal filter(AFTF)algorithm have also been studied in the real-time environment,along with a digital nuclear spectrum acquisition system being set up based on the new algorithms and theγ-ray spectra of 241Am being shown.A useful experimental platform could be provided by this work for the successive work such as the development of global digitized nuclear measurement system and the study of digital nuclear signal processing.展开更多
Traffic monitoring is of major importance for enforcing traffic management policies.To accomplish this task,the detection of vehicle can be achieved by exploiting image analysis techniques.In this paper,a solution is ...Traffic monitoring is of major importance for enforcing traffic management policies.To accomplish this task,the detection of vehicle can be achieved by exploiting image analysis techniques.In this paper,a solution is presented to obtain various traffic parameters through vehicular video detection system(VVDS).VVDS exploits the algorithm based on virtual loops to detect moving vehicle in real time.This algorithm uses the background differencing method,and vehicles can be detected through luminance difference of pixels between background image and current image.Furthermore a novel technology named as spatio-temporal image sequences analysis is applied to background differencing to improve detection accuracy.Then a hardware implementation of a digital signal processing (DSP) based board is described in detail and the board can simultaneously process four-channel video from different cameras. The benefit of usage of DSP is that images of a roadway can be processed at frame rate due to DSP′s high performance.In the end,VVDS is tested on real-world scenes and experiment results show that the system is both fast and robust to the surveillance of transportation.展开更多
On the basis of modified atomic transformations the new WA-systems of Kravchenko functions are constructed.As an example the digital processing of time series of the various physical nature processing is considered.Th...On the basis of modified atomic transformations the new WA-systems of Kravchenko functions are constructed.As an example the digital processing of time series of the various physical nature processing is considered.The numerical experiments and physical analysis of the results confirm the efficiency of the proposed WA-systems of Kravchenko functions.展开更多
This fully digital beam position measurement instrument is designed for beam position monitoring and machine research in Shanghai Synchrotron Radiation Facility. The signals received from four position-sensitive detec...This fully digital beam position measurement instrument is designed for beam position monitoring and machine research in Shanghai Synchrotron Radiation Facility. The signals received from four position-sensitive detectors are narrow pulses with a repetition rate up to 499.654 MHz and a pulse width of around 100 ps, and their dynamic range could vary over more than 40 dB in machine research. By the employment of the under-sampling technique based on high-speed high-resolution A/D conversion, all the processing procedure is performed fully by the digital signal processing algorithms integrated in one single Field Programmable Gate Array. This system functions well in the laboratory and commissioning tests, demonstrating a position resolution (at the turn by turn rate of 694 kHz) better than 7 μm over the input amplitude range of -40 dBm to 10 dBm which is well beyond the requirement.展开更多
In this paper, the evaluation by running window smoothing is used for the digital processing of the polarization of geophysical ULF signals. The observed signals are resolved into two orthogonal complex components so ...In this paper, the evaluation by running window smoothing is used for the digital processing of the polarization of geophysical ULF signals. The observed signals are resolved into two orthogonal complex components so that it is no longer necessary to consider the phase and amplitude of the signals simultaneously.展开更多
A method of describing one-dimensional photonic crystals （1DPCs） based on Z-domain digital signal processing theory is presented. The analytical expression of the target band gap spectrum in the digital domain is ob...A method of describing one-dimensional photonic crystals （1DPCs） based on Z-domain digital signal processing theory is presented. The analytical expression of the target band gap spectrum in the digital domain is obtained by the autocorrelation of its impulse response. The feasibility of this method is verified by reconstructing two simple 1DPC structures with a target photonic band gap obtained by the traditional transfer matrix method. This method provides an effective approach to function-guided designs of interference-based band gap structures for photonic applications.展开更多
A discrete model reference adaptive controller of robot arm is obtained by integrating the reduced dynamic model of robot, model reference adaptive control （MRAC） and digital signal processing （DSP） computer syste...A discrete model reference adaptive controller of robot arm is obtained by integrating the reduced dynamic model of robot, model reference adaptive control （MRAC） and digital signal processing （DSP） computer system into an electromechanical system. With the DSP computer system, the control signal of each joint of the robot arm can be processed in real time and independently. The simulation and experiment results show that with the control strategy, the robot achieved a good trajectory following precision, a good decoupling performance and a high real-time adaptivity.展开更多
In this paper, we investigate advanced digital signal process ing （DSP） at the transmitter and receiver side for signal pre equalization and postequalization in order to improve spec trum efficiency （SE） and trans...In this paper, we investigate advanced digital signal process ing （DSP） at the transmitter and receiver side for signal pre equalization and postequalization in order to improve spec trum efficiency （SE） and transmission distance in an optical access network. A novel DSP scheme for this optical super Nyquist filtering 9 Quadrature Amplitude Modulation （9 QAM） like signals based on muhimodulus equalization with out post filtering is proposed. This scheme recovers the Ny quist filtered Quadrature PhaseShift Keying （QPSK） signal to a 9QAMlike one. With this technique, SE can be increased to 4 b/s/Hz for QPSK signals. A novel digital superNyquist signal generation scheme is also proposed to further suppress the Nyquist signal bandwidth and reduce channel crosstalk without the need for optical prefiltering. Only optical cou plers are needed for superNyquist wavelengthdivisionmulti plexing （WDM） channel multiplexing. We extend the DSP for shorthaul optical transmission networks by using highorder QAMs. We propose a highspeed Can＇ierless Amplitude/Phase 64 QAM （CAP64 QAM） system using directly modulated la ser （DML） based on direct detection and digital equalization. Decisiondirected least mean square is used to equalize the CAP64QAM. Using this scheme, we generate and transmit up to 60 Gbit/s CAP64QAM over 20 km standard single mode fiber based on the DML and direct detection. Finally, several key problems are solved for real time orthogonalfre quencydivisionmultiplexing （OFDM） signal transmission aml processing. With coherent detection, up to 100 Glfit/s 16 QAMOFDM realtime transmission is possible.展开更多
The outstanding advantage of digital signal processing (DSP) techniques and Field Programmable Gate Array (FPGA) technology is capable of improving the quality of the experimental measurements for nuclear radiation. I...The outstanding advantage of digital signal processing (DSP) techniques and Field Programmable Gate Array (FPGA) technology is capable of improving the quality of the experimental measurements for nuclear radiation. In this article, a compact DMCA 8 K was designed and manufactured using DSP technique based on FPGA technology. In particular, the output of the preamplifier is completely processed by digital techniques which are obtained from the analog-to-digital converter (ADC) to calculate the baseline, DC offset, energy peaks, pile up, threshold discrimination and then the form of energy spectrum. The Spartan-6 board is used as a hardware for the development of the digital multichannel analyzer (DMCA), which is equipped with the 14-bit AD6645 with 62.5 Msps sample rate. The application software for instrument control, data acquisition and data processing was written under C++ builder via the RS-232 interface. The designed DMCA system has been tested with a HPGe detector using gamma sources of 60Co and 137Cs and a reference pulser.展开更多
In today’s world, the development ofeconomy has led to the continuous developmentand evolution of science and technology. Computertechnology and large-scale integration technologyhave been well developed and applied,...In today’s world, the development ofeconomy has led to the continuous developmentand evolution of science and technology. Computertechnology and large-scale integration technologyhave been well developed and applied, followed by thetechnology of digital signal processing DSP productionand application. In the field of logging, the applicationfunction of this technology plays a key role. It not onlyallows the imaging logging technology to be furtherdeveloped, but also enables fast and accurate processingof downhole signals. Therefore, among many loggingtools today, digital signal processing DSPs have beenwidely used, and their functions have been fullyutilized. This paper analyzes the application of signalprocessor DSP in logging instruments. It is hoped thatit can play a reference role in the good application anddevelopment of logging instruments.展开更多
In recent years, explosively increasing data traffic has been boosting the con?tinuous demand of high speed optical interconnection inside or among data centers, high performance computers and even consumer electronic...In recent years, explosively increasing data traffic has been boosting the con?tinuous demand of high speed optical interconnection inside or among data centers, high performance computers and even consumer electronics. To pursue the improved intercon?nection performance of capacity, energy efficiency and simplicity, effective approaches are demonstrated including particularly advanced digital signal processing (DSP) meth?ods. In this paper, we present a review about the enabling adaptive DSP methods for opti?cal interconnection applications, and a detailed summary of our recent and ongoing works in this field. In brief, our works focus on dealing with the specific issues for short-reach interconnection scenarios with adaptive operation, including signal-to-noise-ratio (SNR) limitation, level nonlinearity distortion, energy efficiency consideration and the de?cision precision.展开更多
This is a paper about laser gyro sign a l processing circuit which is designed based on field-programmable gate array(FPGA) and digital signal processor(DSP).Through a pre-amplifier circuit,FPGA and DSP,a weak current...This is a paper about laser gyro sign a l processing circuit which is designed based on field-programmable gate array(FPGA) and digital signal processor(DSP).Through a pre-amplifier circuit,FPGA and DSP,a weak current signal is converted and transferred,then sent to the computer to display the final results.Through the laser gyro performance te sting,the obtained results coincide with those of the existing methods.Thus th e d esigned circuit realizes the function of laser gyro signal processing.展开更多
Bio-sensor arrays for multi-channel recording have been developed recently and signal processing platforms for those signals have been studied actively.But it’s thereal situation which these technologies are generall...Bio-sensor arrays for multi-channel recording have been developed recently and signal processing platforms for those signals have been studied actively.But it’s thereal situation which these technologies are generally developed and studied respectively.So the interface design between recording array and signal processing platform is also an important issue to make bio-sensor signal processing system.In this paper,we proposed interface which has unique protocols to control sensor array and operate platform.There are two types of protocols in the interface.One is between sensor array and MCU in platform and the other is between MCU and board for wireless communication.Basically,each protocol has two kinds of modes(single,frame)and it can be extended if needed.展开更多
Recently,real-time processing systems for bio-signal of the muscles generated by the movement of the user have been developed.Finite impulse response(FIR)filter for bio-signal processing in bio-signal process systems ...Recently,real-time processing systems for bio-signal of the muscles generated by the movement of the user have been developed.Finite impulse response(FIR)filter for bio-signal processing in bio-signal process systems is composed of multiple multiplier and adder of high-area.This makes the chip area increase significantly.To solve this problem,a low-area digital FIR filter is proposed in this paper,which can reduce the chip area.展开更多
This paper proposes the design and development of virtual experimental projects in the Digital Signal Processing course,using MATLAB,Proteus,and CCS platforms to develop a library of typical experimental cases for bio...This paper proposes the design and development of virtual experimental projects in the Digital Signal Processing course,using MATLAB,Proteus,and CCS platforms to develop a library of typical experimental cases for biomedical engineering majors and discusses the design process.Based on these typical cases,this paper explores the secondary design for innovative engineering practice case teaching,which can promote students’understanding and mastery of digital signal processing theories,algorithms,and technologies in an intuitive,flexible,and efficient way;quickly build new innovative engineering case models and further cultivate students’engineering application ability as well as innovative thinking.展开更多
文摘The automation process is a very important pillar for Industry 4.0.One of the first steps is the control of motors to improve production efficiency and generate energy savings.In mass production industries,techniques such as digital signal processing(DSP)systems are implemented to control motors.These systems are efficient but very expensive for certain applications.From this arises the need for a controller capable of handling AC and DC motors that improves efficiency and maintains low energy consumption.This project presents the design of an adaptive control system for brushless AC induction and DC motors,which is functional to any type of plant in the industry.The design was possible by implementing Matlab software and tools such as digital signal processor(DSP)and Simulink.Through an extensive investigation of the state of the art,three models needed to represent the control system have been specified.The first model for the AC motor,the second for the DC motor and the third for the DSP control;this is done in this way so that the probability of failure is lower.Subsequently,these models have been programmed in Simulink,integrating the three main models into one.In this way,the design of a controller for use in AC induction motors,specifically squirrel cage and brushless DC motors,has been achieved.The final model represents a response time of 0.25 seconds,which is optimal for this type of application,where response times of 2e-3 to 3 seconds are expected.
文摘The modified atomic transformations are constructed and proved.On their basis the new complex analytic wavelets are obtained.The proof of the Fourier transforms existence in L1 and L2 on the basis of the theory of atomic functions(AF)are presented.The numerical experiments of digital time series processing and physical analysis of the results confirm the efficiency of the proposed transforms.
基金Supported by National Natural Science Foundation of China(NSFC)projects(No.1075111)
文摘A principle and method of constructing the digital acquisition system is presented in this work,which is convenient for the study on the theories and algorithms of digital nuclear signal processing.The hardware system of the digital acquisition system consists of front-end controller,waveform digitizer and PC workstation,on which the software system has been developed based on Visual C++under Windows environment.The alterable-frequency sampling(AFS)algorithm and the alterable-frequency trapezoidal filter(AFTF)algorithm have also been studied in the real-time environment,along with a digital nuclear spectrum acquisition system being set up based on the new algorithms and theγ-ray spectra of 241Am being shown.A useful experimental platform could be provided by this work for the successive work such as the development of global digitized nuclear measurement system and the study of digital nuclear signal processing.
文摘Traffic monitoring is of major importance for enforcing traffic management policies.To accomplish this task,the detection of vehicle can be achieved by exploiting image analysis techniques.In this paper,a solution is presented to obtain various traffic parameters through vehicular video detection system(VVDS).VVDS exploits the algorithm based on virtual loops to detect moving vehicle in real time.This algorithm uses the background differencing method,and vehicles can be detected through luminance difference of pixels between background image and current image.Furthermore a novel technology named as spatio-temporal image sequences analysis is applied to background differencing to improve detection accuracy.Then a hardware implementation of a digital signal processing (DSP) based board is described in detail and the board can simultaneously process four-channel video from different cameras. The benefit of usage of DSP is that images of a roadway can be processed at frame rate due to DSP′s high performance.In the end,VVDS is tested on real-world scenes and experiment results show that the system is both fast and robust to the surveillance of transportation.
基金Russian Foundation for Basic Research(RFBR)(No.12-02-90425)
文摘On the basis of modified atomic transformations the new WA-systems of Kravchenko functions are constructed.As an example the digital processing of time series of the various physical nature processing is considered.The numerical experiments and physical analysis of the results confirm the efficiency of the proposed WA-systems of Kravchenko functions.
基金Supported by Knowledge Innovation Program of The Chinese Academy of Sciences (KJCX2-YW-N27)the National Natural Science Foundation of China (10875119)100 Talents Program of The Chinese Academy of Sciences
文摘This fully digital beam position measurement instrument is designed for beam position monitoring and machine research in Shanghai Synchrotron Radiation Facility. The signals received from four position-sensitive detectors are narrow pulses with a repetition rate up to 499.654 MHz and a pulse width of around 100 ps, and their dynamic range could vary over more than 40 dB in machine research. By the employment of the under-sampling technique based on high-speed high-resolution A/D conversion, all the processing procedure is performed fully by the digital signal processing algorithms integrated in one single Field Programmable Gate Array. This system functions well in the laboratory and commissioning tests, demonstrating a position resolution (at the turn by turn rate of 694 kHz) better than 7 μm over the input amplitude range of -40 dBm to 10 dBm which is well beyond the requirement.
基金Supported by National Natural Science Foundation of China
文摘In this paper, the evaluation by running window smoothing is used for the digital processing of the polarization of geophysical ULF signals. The observed signals are resolved into two orthogonal complex components so that it is no longer necessary to consider the phase and amplitude of the signals simultaneously.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.10804070 and 61137002)the Key Program of the Science and Technology Commission of Shanghai,China(Grant No.11jc1413300)the Shanghai Leading Academic Discipline Project,China(Grant No.S30108)
文摘A method of describing one-dimensional photonic crystals （1DPCs） based on Z-domain digital signal processing theory is presented. The analytical expression of the target band gap spectrum in the digital domain is obtained by the autocorrelation of its impulse response. The feasibility of this method is verified by reconstructing two simple 1DPC structures with a target photonic band gap obtained by the traditional transfer matrix method. This method provides an effective approach to function-guided designs of interference-based band gap structures for photonic applications.
文摘A discrete model reference adaptive controller of robot arm is obtained by integrating the reduced dynamic model of robot, model reference adaptive control （MRAC） and digital signal processing （DSP） computer system into an electromechanical system. With the DSP computer system, the control signal of each joint of the robot arm can be processed in real time and independently. The simulation and experiment results show that with the control strategy, the robot achieved a good trajectory following precision, a good decoupling performance and a high real-time adaptivity.
基金supported by the High Technology Research and Development Program of China("863"Program)under Grant No.2012AA011303 and 2013AA010501National Nature Science Foundation of China under Grant No.61325002
文摘In this paper, we investigate advanced digital signal process ing （DSP） at the transmitter and receiver side for signal pre equalization and postequalization in order to improve spec trum efficiency （SE） and transmission distance in an optical access network. A novel DSP scheme for this optical super Nyquist filtering 9 Quadrature Amplitude Modulation （9 QAM） like signals based on muhimodulus equalization with out post filtering is proposed. This scheme recovers the Ny quist filtered Quadrature PhaseShift Keying （QPSK） signal to a 9QAMlike one. With this technique, SE can be increased to 4 b/s/Hz for QPSK signals. A novel digital superNyquist signal generation scheme is also proposed to further suppress the Nyquist signal bandwidth and reduce channel crosstalk without the need for optical prefiltering. Only optical cou plers are needed for superNyquist wavelengthdivisionmulti plexing （WDM） channel multiplexing. We extend the DSP for shorthaul optical transmission networks by using highorder QAMs. We propose a highspeed Can＇ierless Amplitude/Phase 64 QAM （CAP64 QAM） system using directly modulated la ser （DML） based on direct detection and digital equalization. Decisiondirected least mean square is used to equalize the CAP64QAM. Using this scheme, we generate and transmit up to 60 Gbit/s CAP64QAM over 20 km standard single mode fiber based on the DML and direct detection. Finally, several key problems are solved for real time orthogonalfre quencydivisionmultiplexing （OFDM） signal transmission aml processing. With coherent detection, up to 100 Glfit/s 16 QAMOFDM realtime transmission is possible.
文摘The outstanding advantage of digital signal processing (DSP) techniques and Field Programmable Gate Array (FPGA) technology is capable of improving the quality of the experimental measurements for nuclear radiation. In this article, a compact DMCA 8 K was designed and manufactured using DSP technique based on FPGA technology. In particular, the output of the preamplifier is completely processed by digital techniques which are obtained from the analog-to-digital converter (ADC) to calculate the baseline, DC offset, energy peaks, pile up, threshold discrimination and then the form of energy spectrum. The Spartan-6 board is used as a hardware for the development of the digital multichannel analyzer (DMCA), which is equipped with the 14-bit AD6645 with 62.5 Msps sample rate. The application software for instrument control, data acquisition and data processing was written under C++ builder via the RS-232 interface. The designed DMCA system has been tested with a HPGe detector using gamma sources of 60Co and 137Cs and a reference pulser.
文摘In today’s world, the development ofeconomy has led to the continuous developmentand evolution of science and technology. Computertechnology and large-scale integration technologyhave been well developed and applied, followed by thetechnology of digital signal processing DSP productionand application. In the field of logging, the applicationfunction of this technology plays a key role. It not onlyallows the imaging logging technology to be furtherdeveloped, but also enables fast and accurate processingof downhole signals. Therefore, among many loggingtools today, digital signal processing DSPs have beenwidely used, and their functions have been fullyutilized. This paper analyzes the application of signalprocessor DSP in logging instruments. It is hoped thatit can play a reference role in the good application anddevelopment of logging instruments.
基金This work was supported by National Natural Science Foundation of Chi⁃na(NSFC)under Grant Nos.61935011,61875124 and 61875049.
文摘In recent years, explosively increasing data traffic has been boosting the con?tinuous demand of high speed optical interconnection inside or among data centers, high performance computers and even consumer electronics. To pursue the improved intercon?nection performance of capacity, energy efficiency and simplicity, effective approaches are demonstrated including particularly advanced digital signal processing (DSP) meth?ods. In this paper, we present a review about the enabling adaptive DSP methods for opti?cal interconnection applications, and a detailed summary of our recent and ongoing works in this field. In brief, our works focus on dealing with the specific issues for short-reach interconnection scenarios with adaptive operation, including signal-to-noise-ratio (SNR) limitation, level nonlinearity distortion, energy efficiency consideration and the de?cision precision.
文摘This is a paper about laser gyro sign a l processing circuit which is designed based on field-programmable gate array(FPGA) and digital signal processor(DSP).Through a pre-amplifier circuit,FPGA and DSP,a weak current signal is converted and transferred,then sent to the computer to display the final results.Through the laser gyro performance te sting,the obtained results coincide with those of the existing methods.Thus th e d esigned circuit realizes the function of laser gyro signal processing.
文摘Bio-sensor arrays for multi-channel recording have been developed recently and signal processing platforms for those signals have been studied actively.But it’s thereal situation which these technologies are generally developed and studied respectively.So the interface design between recording array and signal processing platform is also an important issue to make bio-sensor signal processing system.In this paper,we proposed interface which has unique protocols to control sensor array and operate platform.There are two types of protocols in the interface.One is between sensor array and MCU in platform and the other is between MCU and board for wireless communication.Basically,each protocol has two kinds of modes(single,frame)and it can be extended if needed.
基金The MKE(the Ministry of Knowledge Economy),Korea,under the ITRC(Information Technology Research Center)support program supervised by the NIPA(National IT Industry Promotion Agency) (NIPA-2012-H0301-12-2006)the Seoul Metropolitan Government,under the Seoul R & BD Program supervised by Seoul Business Agency(ST110039)
文摘Recently,real-time processing systems for bio-signal of the muscles generated by the movement of the user have been developed.Finite impulse response(FIR)filter for bio-signal processing in bio-signal process systems is composed of multiple multiplier and adder of high-area.This makes the chip area increase significantly.To solve this problem,a low-area digital FIR filter is proposed in this paper,which can reduce the chip area.
基金the 2021 Experimental Teaching Reform Project of Shanghai University of Medicine&Health Sciences“Digital Signal Processing Course Design”(Project Number:JG(21)04-B4-02).
文摘This paper proposes the design and development of virtual experimental projects in the Digital Signal Processing course,using MATLAB,Proteus,and CCS platforms to develop a library of typical experimental cases for biomedical engineering majors and discusses the design process.Based on these typical cases,this paper explores the secondary design for innovative engineering practice case teaching,which can promote students’understanding and mastery of digital signal processing theories,algorithms,and technologies in an intuitive,flexible,and efficient way;quickly build new innovative engineering case models and further cultivate students’engineering application ability as well as innovative thinking.
