TEST OF BOARD-LEVEL BOUNDARY SCAN INTEGRITY

The IEEE Standard 1149.1 boundary scan (BS) implementation provides the internal access required for testing the digital printed circuit board (PCB). However, the integrity of the boundary scan test infrastructure should be tested first to guarantee the validation of the results of the rest functional test and diagnosis. This paper describes the fault models and test principles of the BS test access port (TAP) lines on PCBs. A test algorithm with high fault coverage and short time is then presented for the PCB on which all ICs are BS ones.

Accelerating hybrid and compact neural networks targeting perception and control domains with coarse-grained dataflow reconfiguration

Driven by continuous scaling of nanoscale semiconductor technologies,the past years have witnessed the progressive advancement of machine learning techniques and applications.Recently,dedicated machine learning accelerators,especially for neural networks,have attracted the research interests of computer architects and VLSI designers.State-of-the-art accelerators increase performance by deploying a huge amount of processing elements,however still face the issue of degraded resource utilization across hybrid and non-standard algorithmic kernels.In this work,we exploit the properties of important neural network kernels for both perception and control to propose a reconfigurable dataflow processor,which adjusts the patterns of data flowing,functionalities of processing elements and on-chip storages according to network kernels.In contrast to stateof-the-art fine-grained data flowing techniques,the proposed coarse-grained dataflow reconfiguration approach enables extensive sharing of computing and storage resources.Three hybrid networks for MobileNet,deep reinforcement learning and sequence classification are constructed and analyzed with customized instruction sets and toolchain.A test chip has been designed and fabricated under UMC 65 nm CMOS technology,with the measured power consumption of 7.51 mW under 100 MHz frequency on a die size of 1.8×1.8 mm^2.

A routing algorithm for FPGAs with time-multiplexed interconnects

Previous studies show that interconnects occupy a large portion of the timing budget and area in FPGAs.In this work,we propose a time-multiplexing technique on FPGA interconnects.In order to fully exploit this interconnect architecture,we propose a time-multiplexed routing algorithm that can actively identify qualified nets and schedule them to multiplexable wires.We validate the algorithm by using the router to implement 20 benchmark circuits to time-multiplexed FPGAs.We achieve a 38%smaller minimum channel width and 3.8%smaller circuit critical path delay compared with the state-of-the-art architecture router when a wire can be time-multiplexed six times in a cycle.

A Low Power Non-Volatile LR-WPAN Baseband Processor with Wake-Up Identification Receiver

The paper proposes a low power non-volatile baseband processor with wake-up identification(WUI) receiver for LR-WPAN transceiver.It consists of WUI receiver,main receiver,transmitter,non-volatile memory(NVM) and power management module.The main receiver adopts a unified simplified synchronization method and channel codec with proactive Reed-Solomon Bypass technique,which increases the robustness and energy efficiency of receiver.The WUI receiver specifies the communication node and wakes up the transceiver to reduce average power consumption of the transceiver.The embedded NVM can backup/restore the states information of processor that avoids the loss of the state information caused by power failure and reduces the unnecessary power of repetitive computation when the processor is waked up from power down mode.The baseband processor is designed and verified on a FPGA board.The simulated power consumption of processor is 5.1uW for transmitting and 28.2μW for receiving.The WUI receiver technique reduces the average power consumption of transceiver remarkably.If the transceiver operates 30 seconds in every 15 minutes,the average power consumption of the transceiver can be reduced by two orders of magnitude.The NVM avoids the loss of the state information caused by power failure and energy waste caused by repetitive computation.

MOSFET-like CNFET based logic gate library for low-power application:a comparative study

The next generation oflogic gate devices are expected to depend upon radically new technologies mainly due to the increasing difficulties and limitations of existing CMOS technology. MOSFET like CNFETs should ideally be the best devices to work with for high-performance VLS1. This paper presents results of a comprehensive comparative study of MOSFET-like carbon nanotube field effect transistors （CNFETs） technology based logic gate library for high-speed, low-power operation than conventional bulk CMOS libraries. It focuses on comparing four promising logic families namely： complementary-CMOS （C-CMOS）, transmission gate （TG）, complementary pass logic （CPL） and Domino logic （DL） styles are presented. Based on these logic styles, the proposed library of static and dynamic NAND-NOR logic gates, XOR, multiplexer and full adder functions are implemented efficiently and carefully analyzed with a test bench to measure propagation delay and power dissipation as a function of supply voltage. This analysis provides the right choice of logic style for low-power, high-speed applications. Proposed logic gates libraries are simulated using Synopsys HSPICE based on the standard 32 nm CNFET model. The simulation results demonstrate that, it is best to use C-CMOS logic style gates that are implemented in CNFET technology which are superior in performance compared to other logic styles, because of their low average powerdelay-product （PDP）. The analysis also demonstrates how the optimum supply voltage varies with logic styles in ultra-low power systems. The robustness of the proposed logic gate library is also compared with conventional and state-art of CMOS logic gate libraries.