Use of a Digital Image Correlation Technique for Measuring the Material Properties of Beetle Wing

Beetle wings are very specialized flight organs consisting of the veins and membranes.Therefore it is necessary from a bionic view to investigate the material properties of a beetle wing experimentally.In the present study,we have used a Digital Image Correlation (DIC) technique to measure the elastic modulus of a beetle wing membrane.Specimens were prepared by carefully cutting a beetle hind wing into 3.0 mm by 7.0 mm segments (the gage length was 5 mm).We used a scanning electron microscope for a precise measurement of the thickness of the beetle wing membrane.The specimen was attached to a designed fixture to induce a uniform displacement by means of a micromanipulator.We used an ARAMISTM system based on the digital image correlation technique to measure the corresponding displacement of a specimen.The thickness of the beetle wing varied at different points of the membrane.The elastic modulus differed in relation to the membrane arrangement showing a structural anisotropy;the elastic modulus in the chordwise direction is approximately 2.65 GPa,which is three times larger than the elastic modulus in the spanwise direction of 0.84 GPa.As a result,the digital image correlation-based ARAMIS system was suc- cessfully used to measure the elastic modulus of a beetle wing.In addition to membrane's elastic modulus,we considered the Poisson's ratio of the membrane and measured the elastic modulus of a vein using an Instron universal tensile machine.The result reveals the Poisson's ratio is nearly zero and the elastic modulus of a vein is about 11 GPa.

A DIGITAL SIMULATION TECHNIQUE FOR DRYDEN ATMOSPHERIC TURBULENCE MODEL

Dryden model is usually used in studying the response of flight vehicle to atmospheric turbulence.For a modern flight simulator,it is necessary to generate random winds ( in Dryden model or sometimesothers) with a digital computer.In this paper,a theoretically strict new method to meet this purpose isproposed.By this method,we can acquire a three-dimensional atmospheric turbulence which containsthree components of wind velocity and three components of wind velocity gradient.The reliability of thismethod is checked by comparing the obtained autocorrelation value with the theoretical one.A numericalexample has shown a satisfactory result.Finally,some proposals about how to use this mathematicalmodel in flight simulator are given.

Application of Perceived Teaching with Moderate Elimination of“Graphics”in Architectural Design Courses

Starting from the traditional form of“graphic”architectural education,this paper explores a teaching method of entity construction experience,instrument assistance,and digital virtual expression symbiosis symbiosis from three aspects:environmental perception,ontology perception,and extension perception.Using physical perception as a medium,and gradually rising from active perception to a comprehensive expression of visual audience perception through practical operation,it allows students to have a more comprehensive understanding of the meaning of architectural design on the basis of the“graphic”expression paradigm.

Application of Digital Technology in Color Test of Compound Lonicera Granules

[Objectives]The research aimed to study application of digital technique in color test of Compound Lonicera Granules.[Methods]A method of color identification of Compound Lonicera Granules based on digital technology was proposed,and the"four-point collection method of color data"was summarized through experiments.[Results]The method was used to test color of 168 batches of Compound Lonicera Granules,and it was found that the method had the advantages of fast speed,high accuracy and good repeatability.[Conclusions]The method was used to test color of 168 batches of Compound Lonicera Granules,and it was found that the method had the advantages of fast speed,high accuracy and good repeatability.

Application of 3D Digital Technology in Urban Design:A Case Study of Wuhan City

To achieve standardization and facilitation of urban design and 3D demonstration of construction program,and provide technological support for urban design and approval of construction program,this project integrates planning control elements,builds 3D urban design platform and explores functions of the platform on the basis of existing 3D information base.The platform will improve the efficiency of planning management department's controlling over urban spaces and buildings,further play the role of planning department in supporting the urban construction decision making,and also promote the overall city image and quality of urban spaces.

3D visualization using pulsed and CW digital holographic tomography techniques

We outline the use of digital holographic tomography to determine the three-dimensional （3D） shapes of falling and static objects, such as lenslets and water droplets. Reconstruction of digitally recorded inline holograms is performed using multiplicative and Radon transform techniques to reveal the exact 3D shapes of the objects.

Application of the digital matched-filter technique to ultrasonic non-destructive testing

Acoustic-pulse compression is obtained in systems with different timebandwidth products by applying the digital matched-filter technique to ultrasonic non-destructive testing. The signal is linearly frequency -modulated (LFM) pulse and the digitized electrical-excitation signal itself is used as a digital matched filter. Experimental results are in good agreement with theory. Suppressions of side lobes achieve -41.9 dB and -41.5 dB for the Hamming and Gaussian weighted signals respectively. It shows that the application of the digital matched-filter technique improves the performances of a ultrasonic testing system explicitly.

Application of three-dimensional digitalized reconstruction of latissimus dorsi myocutaneous flap

Developments of digital technology and three-dimensional(3D)reconstruction allowed a precise description of anatomic structures.With the introduction of Visible Human Project and Virtual Chinese Human(VCH)techniques,more detailed anatomic images could be obtained.Digitized visible models of these structures can be applied as a useful tool in clinical training.The aim of this study was to reconstruct the normal structures of thoracodorsal artery in 3D images and to establish the digitized visible models of latissimus dorsi myocutaneous(LDM)flap.The cross-sectional images from the four VCH datasets were reviewed to study LDM and thoraco-dorsal artery structures on a section-by-section basis.Next,two adult fresh cadaver specimens were perfused with lead oxide-gelatine mixture and subject to radio-graphic CT scanning on their torsos.The cross-sectional images from the CT images were reviewed to study thor-acodorsal artery structures.Three-dimensional computer-ized reconstructions of LDM flap structures were conducted from these datasets by using Amira 3.1(TGS)software respectively.The 3D reconstructed visible models established from these datasets perfectly displayed the anatomic characteristics of LDM flap.

Experimental and numerical simulation on the sliding process of roof rock blocks triggered by dynamic disturbance

With the excavation of underground opening,the roof rock block may fall under external dynamic disturbance.In this paper,the roof rock mass was simplified as a rock block system composed of trapezoidal rock blocks.A series of experiments and numerical simulations were performed to study the sliding process of the key block under the horizontal static clamping load and vertical impact disturbance.The propagation of stress wave in the block system were captured and analyzed by using high-speed camera and digital image correlation technique.The results reveal that a pendulum-type wave was generated due to the propagation and superposition of stress waves in the block system.Therefore,the governing mechanism of the sliding displacement of the key block was clarified based on the propagation of incident stress waves or pendulum-type waves.Meanwhile,it is found that the sliding distance of the key block decreases in a power function with the increasing friction coefficient,or decreases in a parabolic function with the increasing trapezoid internal angle.Finally,a case study on the roof block sliding of the roadway at a gold mine was conducted,and it is concluded that the sliding of the key block resulted from the coupled effects of"shear driving"and"low friction"driven by stress wave propagation,regardless of a single or multi-layer rock block system.These results may provide technical guideline for preventing rock-falling accidents caused by blasting distur-bances in underground mining.

Fracture behaviors of commercially pure titanium under biaxial tension:Experiment and modeling

The fracture behaviors and associated mechanisms of metallic materials under biaxial stress are vital for their manufacturability and service performance.In this work,the fracture behaviors of commercially pure titanium(CP-Ti)under quasi-uniaxial and equi-biaxial tension were investigated by using the digital image correlation technique and finite element modeling.The fracture behaviors under quasi-uniaxial tension were characterized by a general normal fracture.In contrast,normal fracture firstly occurred per-pendicular to the rolling direction(RD)under equi-biaxial tension,followed by secondary shear fracture along the 45°direction relative to the RD.The normal fracture was attributed to the lower strain hard-ening ability in RD compared to the transverse direction(TD)induced by the TD-split type basal texture.The different hardening abilities introduced large shear stress in the 45°direction,which contributed sig-nificantly to the secondary shear fracture.An anisotropy parameter K(△S_(s)/σ_(s)),defined as the ratio of the equivalent effective traction stress to the yield strength,was proposed for the first time,to predict the fracture path with the impact of crystallographic preferred orientation.

Elastic deformation behavior of CuZrAlNb metallic glass matrix composites with different crystallization degrees

The room temperature brittleness has been a long standing problem in bulk metallic glasses realm.This has seriously limited the application potential of metallic glasses and their composites.The elastic deformation behaviors of metallic glass matrix composites are closely related to their plastic deformation states.The elastic deformation behaviors of Cu48-xZr48Al4Nbx（x=0,3at.%）metallic glass matrix composites（MGMCs）with different crystallization degrees were investigated using an in-situ digital image correlation（DIC）technique during tensile process.With decreasing crystallization degree,MGMC exhibits obvious elastic deformation ability and an increased tensile fracture strength.The notable tensile elasticity is attributed to the larger shear strain heterogeneity emerging on the surface of the sample.This finding has implications for the development of MGMCs with excellent tensile properties.

Prejudgments for Reference Potential Determination to Quantitative EEG Interpretation:Amplitude Distribution and Ear-lobe Activation

This paper presents an automatic techruque of suitable reference potential selection for quantitative EEG interpretation.The 16-channels EEG recording under mono-polar derivation is analyzed.There are two prejudgments defined for checking the amplitude distribution and ear lobe activation.After prejudgments,the EEG is classified into several cases in cluding diffused case,non-diffused case,and artifact contami nation case.Due to the cases,an automatic reference selection method is applied in order to find out suitable reference potential.Finally,the referential derivation constructed according to the obtained reference potential,is evaluated for further EEG rhythm analysis.The presented technique can high light the EEG rhythm of interest,which is useful for quantitative EEG interpretation by both visual inspection and automatic evaluation.