期刊文献+
共找到18,521篇文章
< 1 2 250 >
每页显示 20 50 100
A novel relationship between elastic modulus and void ratio associated with principal stress for coral calcareous sand
1
作者 Ran Gao Jianhong Ye 《Journal of Rock Mechanics and Geotechnical Engineering》 SCIE CSCD 2024年第3期1033-1048,共16页
Elastic moduli,e.g.shear modulus G and bulk modulus K,are important parameters of geotechnical materials,which are not only the indices for the evaluation of the deformation ability of soils but also the important bas... Elastic moduli,e.g.shear modulus G and bulk modulus K,are important parameters of geotechnical materials,which are not only the indices for the evaluation of the deformation ability of soils but also the important basic parameters for the development of the constitutive models of geotechnical materials.In this study,a series of triaxial loading-unloading-reloading shear tests and isotropic loading-unloadingreloading tests are conducted to study several typical mechanical properties of coral calcareous sand(CCS),and the void ratio evolution during loading,unloading and reloading.The test results show that the stress-strain curves during multiple unloading processes are almost parallel,and their slopes are much greater than the deformation modulus at the initial stage of loading.The relationship between the confining pressure and the volumetric strain can be defined approximately by a hyperbolic equation under the condition of monotonic loading of confining pressure.Under the condition of confining pressure unloading,the evolution of void ratio is linear in the e-lnp0 plane,and these lines are a series of almost parallel lines if there are multiple processes of unloading.Based on the experimental results,it is found that the modified Hardin formulae for the elastic modulus estimation have a significant deviation from the tested values for CCS.Based on the experimental results,it is proposed that the elastic modulus of soils should be determined by the intersection line of two spatial surfaces in the G/K-e-p’/pa space(pa:atmosphere pressure).“Ye formulation”is further proposed for the estimation of the elastic modulus of CCS.This new estimation formulation for soil elastic modulus would provide a new method to accurately describe the mechanical behavior of granular soils. 展开更多
关键词 Coral calcareous sand(CCS) Elastic shear modulus Elastic bulk modulus Triaxial test Estimation formulation Ye formulation
下载PDF
Interconnected microstructure and flexural behavior of Ti_(2)C-Ti composites with superior Young’s modulus
2
作者 Fengbo Sun Rui Zhang +3 位作者 Fanchao Meng Shuai Wang Lujun Huang Lin Geng 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2024年第9期2088-2101,共14页
To enhance the Young’s modulus(E)and strength of titanium alloys,we designed titanium matrix composites with intercon-nected microstructure based on the Hashin-Shtrikman theory.According to the results,the in-situ re... To enhance the Young’s modulus(E)and strength of titanium alloys,we designed titanium matrix composites with intercon-nected microstructure based on the Hashin-Shtrikman theory.According to the results,the in-situ reaction yielded an interconnected microstructure composed of Ti_(2)C particles when the Ti_(2)C content reached 50vol%.With widths of 10 and 230 nm,the intraparticle Ti lamellae in the prepared composite exhibited a bimodal size distribution due to precipitation and the unreacted Ti phase within the grown Ti_(2)C particles.The composites with interconnected microstructure attained superior properties,including E of 174.3 GPa and ultimate flexural strength of 1014 GPa.Compared with that of pure Ti,the E of the composite was increased by 55% due to the high Ti_(2)C content and interconnected microstructure.The outstanding strength resulted from the strong interfacial bonding,load-bearing capacity of interconnected Ti_(2)C particles,and bimodal intraparticle Ti lamellae,which minimized the average crack driving force.Interrupted flexural tests revealed preferential crack initiation along the{001}cleavage plane and grain boundary of Ti_(2)C in the region with the highest tensile stress.In addition,the propagation can be efficiently inhibited by interparticle Ti grains,which prevented the brittle fracture of the composites. 展开更多
关键词 titanium matrix composites titanium carbide INTERFACE Young’s modulus flexural behavior
下载PDF
Enhanced asphalt dynamic modulus prediction: A detailed analysis of artificial hummingbird algorithm-optimised boosted trees
3
作者 Ikenna D.Uwanuakwa Ilham Yahya Amir Lyce Ndolo Umba 《Journal of Road Engineering》 2024年第2期224-233,共10页
This study introduces and evaluates a novel artificial hummingbird algorithm-optimised boosted tree(AHAboosted)model for predicting the dynamic modulus(E*)of hot mix asphalt concrete.Using a substantial dataset from N... This study introduces and evaluates a novel artificial hummingbird algorithm-optimised boosted tree(AHAboosted)model for predicting the dynamic modulus(E*)of hot mix asphalt concrete.Using a substantial dataset from NCHRP Report-547,the model was trained and rigorously tested.Performance metrics,specifically RMSE,MAE,and R2,were employed to assess the model's predictive accuracy,robustness,and generalisability.When benchmarked against well-established models like support vector machines(SVM)and gaussian process regression(GPR),the AHA-boosted model demonstrated enhanced performance.It achieved R2 values of 0.997 in training and 0.974 in testing,using the traditional Witczak NCHRP 1-40D model inputs.Incorporating features such as test temperature,frequency,and asphalt content led to a 1.23%increase in the test R2,signifying an improvement in the model's accuracy.The study also explored feature importance and sensitivity through SHAP and permutation importance plots,highlighting binder complex modulus|G*|as a key predictor.Although the AHA-boosted model shows promise,a slight decrease in R2 from training to testing indicates a need for further validation.Overall,this study confirms the AHA-boosted model as a highly accurate and robust tool for predicting the dynamic modulus of hot mix asphalt concrete,making it a valuable asset for pavement engineering. 展开更多
关键词 ASPHALT Dynamic modulus PREDICTION Artificial hummingbird algorithm Boosted tree
下载PDF
Modelling of the variation of granular base materials resilient modulus with material characteristics and humidity conditions
4
作者 Jean-Pascal Bilodeau Erdrick Leandro Perez-Gonzalez Ali Saeidi 《Journal of Road Engineering》 2024年第1期27-35,共9页
This study aims to quantify the susceptibility of granular materials used in pavements to changes in moisture content and propose a correlation model to incorporate this susceptibility into seasonal analyses.The fines... This study aims to quantify the susceptibility of granular materials used in pavements to changes in moisture content and propose a correlation model to incorporate this susceptibility into seasonal analyses.The fines content and the percentage of fractured coarse aggregates were identified as direct indicators of the resilient modulus susceptibility to changes in water content.The results showed that the percentage of fractured coarse aggregates particles(FR)has a more significant impact on the resilient modulus(Er)of crushed granular materials used in pavement construction than the combined indicator of the fines content and sample volumetrics(nf).Crushed granular materials with a higher percentage of fractured coarse aggregates are relatively insensitive to changes in the degree of saturation,but become more sensitive as the fine fraction porosity decreases.An adjusted model was proposed based on the existing formulation,but considers a complex parameter to describe and adjust the sensitivity of base granular materials to variations in moisture content with respect to fabrication charac-teristics,fines content and volumetric properties.The model shows that the variation of Er values is below10%for fully crushed granular materials.However,it reaches approximately±12%for materials with 75%of crushed coarse aggregates andþ40%and-25%for materials with FR=50%.This model could help select good ag-gregates characteristics and adjust grain-size distribution for environments where significant moisture content variations can occur in the pavement system,such as in the Province of Quebec(Canada).As it is based on pa-rameters that can be easily determined or estimated,it also represents a valuable tool for detailed design and analysis that can consider material characteristics. 展开更多
关键词 Resilient modulus Degree of saturation Humidity conditions Unbound granular materials Pavement base
下载PDF
Zeta Potential of Aggregate and Dynamic Modulus of HMA Estimation Using Aggregate Silica Content
5
作者 Mouhamed Lamine Chérif Aidara Serigne Touba Thiam Alan Carter 《Open Journal of Civil Engineering》 CAS 2023年第1期35-47,共13页
The mineralogical composition of an aggregate influences its adhesion with bitumen and therefore its dynamic modulus. However, few studies have been conducted on this aspect. One of the most used properties to describ... The mineralogical composition of an aggregate influences its adhesion with bitumen and therefore its dynamic modulus. However, few studies have been conducted on this aspect. One of the most used properties to describe the impact of aggregate on the adhesiveness phenomena is the zeta potential. In this study, the first mineralogical and chemical properties were considered through the percentage of silica in the rock source of aggregates and the electric aggregate particles charge zeta. Dynamic modulus values used for regression process are determined from complex modulus test on nine asphalt concretes mix designed with aggregate types (basalt of Diack, quartzite of Bakel and Limestone of Bandia). The results showed that aggregate with high percentage of silica have higher zeta potential than aggregate with low percentage of silica. The development of a zeta potential predictive model showed a strong sensitivity to silica. The results of the complex modulus tests showed that Hot Mixture Asphalt (HMA) mixed with aggregate containing high silica contents gave better results than those mixed with aggregates containing low percentage of silica. The dynamic modulus predictive models of HMA developed shows that it is the properties of bitumen that influence more. However, the effect of silica although low, is very marked at low temperatures and high frequencies. 展开更多
关键词 Basalt of Diack Quartzite of Bakel Limestone of Bandia Complex modulus Test Binder-Aggregate Adhesiveness
下载PDF
Integrated Computational Materials Engineering for the Development and Design of High Modulus Al Alloys
6
作者 Chengpeng Xue Xinghai Yang +1 位作者 Shuo Wang Junsheng Wang 《Journal of Beijing Institute of Technology》 EI CAS 2023年第4期443-462,共20页
Integrated computational materials engineering(ICME)is to integrate multi-scale computational simulations and key experimental methods such as macroscopic,mesoscopic,and microscopic into the whole process of Al alloys... Integrated computational materials engineering(ICME)is to integrate multi-scale computational simulations and key experimental methods such as macroscopic,mesoscopic,and microscopic into the whole process of Al alloys design and development,which enables the design and development of Al alloys to upgrade from traditional empirical to the integration of compositionprocess-structure-mechanical property,thus greatly accelerating its development speed and reducing its development cost.This study combines calculation of phase diagram(CALPHAD),Finite element calculations,first principle calculations,and microstructure characterization methods to predict and regulate the formation and structure of composite precipitates from the design of highmodulus Al alloy compositions and optimize the casting process parameters to inhibit the formation of micropore defects in the casting process,and the final tensile strength of Al alloys reaches420 MPa and Young's modulus reaches more than 88 GPa,which achieves the design goal of the high strength and modulus Al alloys,and establishes a new mode of the design and development of the strength/modulus Al alloys. 展开更多
关键词 integrated computational materials engineering(ICME) high modulus Al alloys
下载PDF
Numerical analysis of bending property of bi-modulus materials and a new method for measurement of tensile elastic modulus
7
作者 Tianmin Wang Jianhong Ye 《Journal of Rock Mechanics and Geotechnical Engineering》 SCIE CSCD 2023年第10期2539-2555,共17页
In nature,there are widely distributed bi-modulus materials with different deformation characteristics under compressive and tensile stress states,such as concrete,rock and ceramics.Due to the lack of constitutive mod... In nature,there are widely distributed bi-modulus materials with different deformation characteristics under compressive and tensile stress states,such as concrete,rock and ceramics.Due to the lack of constitutive model that could reasonably consider the bi-modulus property of materials,and the lack of simple and reliable measurement methods for the tensile elastic parameters of materials,scientists and engineers always neglect the effect of the bi-modulus property of materials in engineering design and numerical simulation.To solve this problem,this study utilizes the uncoupled strain-driven constitutive model proposed by Latorre and Montáns(2020)to systematically study the distributions and magnitudes of stresses and strains of bi-modulus materials in the three-point bending test through the numerical method.Furthermore,a new method to synchronously measure the tensile and compressive elastic moduli of materials through the four-point bending test is proposed.The numerical results show that the bi-modulus property of materials has a significant effect on the stress,strain and displacement in the specimen utilized in the three-point and four-point bending tests.Meanwhile,the results from the numerical tests,in which the elastic constitutive model proposed by Latorre and Montáns(2020)is utilized,also indicate that the newly proposed measurement method has a good reliability.Although the new measurement method proposed in this study can synchronously and effectively measure the tensile and compressive elastic moduli,it cannot measure the tensile and compressive Poisson’s ratios. 展开更多
关键词 Bi-modulus material Uncoupled strain-driven constitutive model Three-point bending test Four-point bending test Tensile elastic modulus FssiCAS
下载PDF
3D bioprinting of complex biological structures with tunable elastic modulus and porosity using freeform reversible embedding of suspended hydrogels
8
作者 Zhuang Chen Chuanzhen Huang +5 位作者 Hanlian Liu Xu Han Zhichao Wang Shuying Li Jun Huang Zhen Wang 《Bio-Design and Manufacturing》 SCIE EI CAS CSCD 2023年第5期550-562,共13页
Three-dimensional(3D)bioprinting has been used widely for the construction of hard tissues such as bone and cartilage.However,constructing soft tissues with complex structures remains a challenge.In this study,complex... Three-dimensional(3D)bioprinting has been used widely for the construction of hard tissues such as bone and cartilage.However,constructing soft tissues with complex structures remains a challenge.In this study,complex structures characterized by both tunable elastic modulus and porosity were printed using freeform reversible embedding of suspended hydrogels(FRESHs)printing methods.A mixture of alginate and gelatin was used as the main functional component of the bioink.Rheological analysis showed that this bioink possesses shear thinning and shear recovery properties,supporting both cryogenic and FRESH printing methods.Potential printing capabilities and limitations of cryogenic and FRESH printing were then analyzed by printability tests.A series of complex structures were printed by FRESH printing methods which could not be realized using conventional approaches.Mechanical tests and scanning electron microscopy analysis showed that the printed structure is of excellent flexibility and could be applied in various conditions by adjusting its mechanical modulus and porosity.L929 fibroblast cells maintained cell viability in cell-laden-printed structures,and the addition of collagen further improved the hydrogels’biocompatibility.Overall,all results provided useful insight into the building of human soft tissue organ blocks. 展开更多
关键词 Bioink Freeform reversible embedding of suspended hydrogels(FRESHs)printing 3D extrusion cell-laden printing Tissue engineering Tunable elastic modulus and porosity
下载PDF
Numerical Analysis on Magnetic-induced Shear Modulus of Magnetorheological Elastomers Based on Multi-chain Model 被引量:4
9
作者 朱应顺 龚兴龙 +2 位作者 党辉 张先舟 张培强 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 北大核心 2006年第2期126-130,共5页
Based on the magnetic interaction energy, using derivative of the magnetic energy density, a model is proposed to compute the magnetic-induced shear modulus of magnetorheological elastomers. Taking into account the in... Based on the magnetic interaction energy, using derivative of the magnetic energy density, a model is proposed to compute the magnetic-induced shear modulus of magnetorheological elastomers. Taking into account the influences of particles in the same chain and the particles in all adjacent chains, the traditional magnetic dipole model of the magnetorheological elastomers is modified. The influence of the ratio of the distance etween adjacent chains to the distance between adjacent particles in a chain on the magnetic induced shear odulus is quantitatively studied. When the ratio is large, the multi-chain model is compatible with the single chain model, but when the ratio is small, the difference of the two models is significant and can not be neglected. Making certain the size of the columns and the distance between adjacent columns, after constructing the computational model of BCT structures, the mechanical property of the magnetorheological elastomers composed of columnar structures is analyzed. Results show that, conventional point dipole model has overrated the magnetic-induced shear modulus of the magnetorheological elastomers. From the point of increasing the magnetic-induced shear modulus, when the particle volume fraction is small, the chain-like structure exhibits better result than the columnar structure, but when the particle volume fraction is large,the columnar structure will be better. 展开更多
关键词 Magnetorheological elastomers Shear modulus Magnetic dipole model
下载PDF
Calculations of rock matrix modulus based on a linear regression relation 被引量:5
10
作者 贺锡雷 贺振华 +2 位作者 汪瑞良 王绪本 蒋炼 《Applied Geophysics》 SCIE CSCD 2011年第3期155-162,239,共9页
The rock matrix bulk modulus or its inverse, the compressive coefficient, is an important input parameter for fluid substitution by the Biot-Gassmann equation in reservoir prediction. However, it is not easy to accura... The rock matrix bulk modulus or its inverse, the compressive coefficient, is an important input parameter for fluid substitution by the Biot-Gassmann equation in reservoir prediction. However, it is not easy to accurately estimate the bulk modulus by using conventional methods. In this paper, we present a new linear regression equation for calculating the parameter. In order to get this equation, we first derive a simplified Gassmann equation by using a reasonable assumption in which the compressive coefficient of the saturated pore fluid is much greater than the rock matrix, and, second, we use the Eshelby- Walsh relation to replace the equivalent modulus of a dry rock in the Gassmann equation. Results from the rock physics analysis of rock sample from a carbonate area show that rock matrix compressive coefficients calculated with water-saturated and dry rock samples using the linear regression method are very close (their error is less than 1%). This means the new method is accurate and reliable. 展开更多
关键词 Bulk modulus rock matrix fluid substitution rock physics linear regression
下载PDF
Comparative study on three dynamic modulus of elasticity and static modulus of elasticity for Lodgepole pine lumber 被引量:5
11
作者 梁善庆 傅峰 《Journal of Forestry Research》 SCIE CAS CSCD 2007年第4期309-312,共4页
The dynamic and static modulus of elasticity (MOE) between bluestained and non-bluestained lumber of Lodgepole pine were tested and analyzed by using three methods of Non-destructive testing (NDT), Portable Ultras... The dynamic and static modulus of elasticity (MOE) between bluestained and non-bluestained lumber of Lodgepole pine were tested and analyzed by using three methods of Non-destructive testing (NDT), Portable Ultrasonic Non-destructive Digital Indicating Testing (Pundit), Metriguard and Fast Fourier Transform (FFT) and the normal bending method. Results showed that the dynamic and static MOE of bluestained wood were higher than those of non-bluestained wood. The significant differences in dynamic MOE and static MOE were found between bulestained and non-bluestained wood, of which, the difference in each of three dynamic MOE (Ep. the ultrasonic wave modulus of elasticity, Ems, the stress wave modulus of elasticity and El, the longitudinal wave modulus of elasticity) between bulestained and non-bluestained wood arrived at the 0.01 significance level, whereas that in the static MOE at the 0.05 significance level. The differences in MOE between bulestained and non-bluestained wood were induced by the variation between sapwood and heartwood and the different densities of bulestained and non-bluestained wood. The correlation between dynamic MOE and static MOE was statistically significant at the 0.01 significance level. Although the dynamic MOE values of Ep, Em, Er were significantly different, there exists a close relationship between them (arriving at the 0.01 correlation level). Comparative analysis among the three techniques indicated that the accurateness of FFT was higher than that of Pundit and Metriguard. Effect of tree knots on MOE was also investigated. Result showed that the dynamic and static MOE gradually decreased with the increase of knot number, indicating that knot number had significant effect on MOE value. 展开更多
关键词 Lodgepole pine Non-destructive testing Dynamic modulus of elasticity Static modulus of elasticity
下载PDF
Self-adapting extraction of matrix mineral bulk modulus and verification of fluid substitution 被引量:5
12
作者 林凯 熊晓军 +4 位作者 杨晓 贺振华 曹俊兴 张玺华 王萍 《Applied Geophysics》 SCIE CSCD 2011年第2期110-116,176,共8页
Gassmann's equations are commonly used for predicting seismic wave velocity in rock physics research.However the input matrix mineral bulk modulus parameters are not accurate,which greatly influences the prediction r... Gassmann's equations are commonly used for predicting seismic wave velocity in rock physics research.However the input matrix mineral bulk modulus parameters are not accurate,which greatly influences the prediction reliability.In this paper,combining the Russell fluid factor with the Gassman-Biot-Geertsma equation and introducing the dry-rock Poisson's ratio,we propose an effective matrix mineral bulk modulus extraction method.This method can adaptively invert the equivalent matrix mineral bulk modulus to apply the Gassmann equation to fluid substitution of complex carbonate reservoirs and increase the fluid prediction reliability.The verification of the actual material fluid substitution also shows that this method is reliable,efficient,and adaptable. 展开更多
关键词 Self-adapting matrix mineral bulk modulus fluid substitution dry rock Poisson's ratio
下载PDF
Water content and modulus relationship of a compacted unsaturated soil 被引量:4
13
作者 章定文 刘松玉 张涛 《Journal of Southeast University(English Edition)》 EI CAS 2012年第2期209-214,共6页
In order to assess the performance of the embankment soil under various climate conditions during the period of service, the modulus behaviour of an unsaturated compacted soil is evaluated using the constant water con... In order to assess the performance of the embankment soil under various climate conditions during the period of service, the modulus behaviour of an unsaturated compacted soil is evaluated using the constant water content triaxial test. Since the water content measurement method is simple and economical and it is used widely in engineering, the soil suction is replaced by the water content and the relationship between the water content and the modulus is developed. The compacted samples are prepared with different compacted water contents, and samples with a similar water content subjected to drying or wetting procedures prior to the triaxial test are also investigated. The effect of the water content and the confining pressure on the modulus is analyzed. The results show that the modulus decreases with the increase in the water content and a power function can be proposed to quantitatively describe the relationship between the modulus and the water content in the range of the measured water content. The modulus increases with the increase in the confining pressure of the compacted soil. However, the effect of the water content on the modulus is more pronounced than that of the confining pressure. This research can be referenced for the compacted embankment soil assessment in-service period. 展开更多
关键词 modulus water content unsaturated compacted soil
下载PDF
A Novel CMOSDual-Modulus Prescaler Based on New Optimized Structure and Dynamic Circuit Technique 被引量:8
14
作者 池保勇 石秉学 《Journal of Semiconductors》 EI CAS CSCD 北大核心 2002年第4期357-361,共5页
s:A divide- by- 12 8/ 12 9or6 4/ 6 5 dual- modulus prescaler based on new optimized structure and dynam ic circuit technique im plem ented in 0 .2 5 μm CMOS digital technology is described.New optimized structure re... s:A divide- by- 12 8/ 12 9or6 4/ 6 5 dual- modulus prescaler based on new optimized structure and dynam ic circuit technique im plem ented in 0 .2 5 μm CMOS digital technology is described.New optimized structure reduces the propagation delay and has higher operating speed.Based on this structure,an im proved D- flip- flop(DFF) using dynam ic circuit technique is proposed.A prototype is fabricated and the measured results show that this prescaler works well in gigahertz frequency range and consumes only35 m W(including three power- hungry output buffers) when the input frequency is2 .5 GHz and the power supply voltage is2 .5 V.Due to its excellent perform ance,the prescaler could be applied to many RF system s. 展开更多
关键词 dual- modulus prescaler D- flip- flop CMOS
下载PDF
Experimental study on dynamic modulus of thermosetting epoxy asphalt mixture for steel deck pavement 被引量:1
15
作者 陈磊磊 钱振东 罗桑 《Journal of Southeast University(English Edition)》 EI CAS 2010年第1期112-116,共5页
In order to study the dynamic performance of the thermosetting epoxy asphalt mixture(EAM), an experimental program on the dynamic modulus E is conducted. First, E of the EAM under different temperatures and frequenc... In order to study the dynamic performance of the thermosetting epoxy asphalt mixture(EAM), an experimental program on the dynamic modulus E is conducted. First, E of the EAM under different temperatures and frequencies are tested through the simple performance test(SPT), and the effects of temperatures and frequencies on the dynamic modulus of the EAM are analyzed. Secondly, the static modulus of the EAM and the dynamic modulus of other two ordinary mixtures are tested and compared to E of the EAM. Finally the dynamic modulus master curve is constructed using the time-temperature superposition principle. The results show that the E values increase with the increase in the test frequency while on the other hand, the E values decrease with the increase in the test temperature. It also can be seen from the results that the dynamic modulus corresponding to the actual vehicle mode is significantly greater than the static modulus, and the dynamic modulus of the EAM is greater than that of SBS mixtures and the common hot mixed asphalt (HMA). The study results can provide a theoretical basis for the design and mechanical analysis of the steel deck pavement. 展开更多
关键词 dynamic modulus epoxy asphalt mixture(EAM) master curve time-temperature superposition principle
下载PDF
Elastic modulus determination at different levels of periodontal ligament in nanoindentation 被引量:1
16
作者 杨宇 汤文成 《Journal of Southeast University(English Edition)》 EI CAS 2017年第1期33-38,共6页
In order to investigate the material properties ofperiodontal ligament ( PDL) in different locations, the nanoindentation method is used to survey the elastic modulus of the PDL at different levels. Cadaveric specim... In order to investigate the material properties ofperiodontal ligament ( PDL) in different locations, the nanoindentation method is used to survey the elastic modulus of the PDL at different levels. Cadaveric specimens of human mandibular canine were obtained from 4 adult donors, 16 transverse specimens were made from the sections of cervical margin, midroot and apex using the slow cutting machine. The prepared specimens were tested in different sections (along the longitudinal direction) and different areas (in the circumferential direction). According to the Oliver-Phair theory, the mean values of elastic modulus were calculated foreach area and the differences among them were compared. In the midroot section, the average elastic modulus is ranging from 0. 11 to 0. 23 MPa, the changing range of the cervical margin and apex are from 0. 21 to 0. 53 MPa and 0. 44 to0.62 MPa, respectively. Experimental results indicate that the average elastic modulus in the midroot is lower than that in the cervical margin and apex, and relatively small changes occur among them. However, there is a large change to the elastic modulus value in the cicumferential direction for the PDL. 展开更多
关键词 periodontal ligament PDL) elastic modulus NANOINDENTATION material properties CANINE
下载PDF
AVO forwarding modeling in two-phase media: multiconstrained matrix mineral modulus inversion
17
作者 林凯 贺振华 +3 位作者 熊晓军 贺锡雷 曹俊兴 薛雅娟 《Applied Geophysics》 SCIE CSCD 2014年第4期395-404,509,共11页
AVO forward modeling is based on two-phase medium theory and is considered an effective method for describing reservoir rocks and fluids. However, the method depends on the input matrix mineral bulk modulus and the ra... AVO forward modeling is based on two-phase medium theory and is considered an effective method for describing reservoir rocks and fluids. However, the method depends on the input matrix mineral bulk modulus and the rationality of the two-phase medium model. We used the matrix mineral bulk modulus inversion method and multiple constraints to obtain a two-phase medium model with physical meaning. The proposed method guarantees the reliability of the obtained AVO characteristicsin two-phase media. By the comparative analysis of different lithology of the core sample, the advantages and accuracy of the inversion method can be illustrated. Also, the inversion method can be applied in LH area, and the AVO characteristics can be obtained when the porosity, fluid saturation, and other important lithology parameters are changed. In particular, the reflection coefficient amplitude difference between the fast P wave and S wave as a function of porosity at the same incidence angle, and the difference in the incidence angle threshold can be used to decipher porosity. 展开更多
关键词 Matrix mineral bulk modulus two-phase media AVO forward modeling
下载PDF
PSO algorithm for Young's modulus reconstruction
18
作者 陈敏 王楠 汤文成 《Journal of Southeast University(English Edition)》 EI CAS 2006年第2期208-212,共5页
To get the quantitive value of abnormal biological tissues, an inverse algorithm about the Young's modulus based on the boundary extraction and the image registration technologies is proposed. With the known displace... To get the quantitive value of abnormal biological tissues, an inverse algorithm about the Young's modulus based on the boundary extraction and the image registration technologies is proposed. With the known displacements of boundary tissues and the force distribution, the Young's modulus is calculated by constructing the unit system and the inverse finite element method (IFEM). Then a tough range of the modulus for the whole tissue is estimated referring the value obtained before. The improved particle swarm optimizer (PSO) method is adopted to calculate the whole Yong's modulus distribution. The presented algorithm overcomes some limitations in other Young's modulus reconstruction methods and relaxes the displacements and force boundary condition requirements. The repetitious numerical simulation shows that errors in boundary displacement are not very sensitive to the estimation of next process; a final feasible solution is obtained by the improved PSO method which is close to the theoretical values obtained during searching in an extensive range. 展开更多
关键词 Young's modulus inverse finite element method particle swarm optimizer
下载PDF
Assessing dynamic modulus properties for typical asphalt mixtures in Jiangsu
19
作者 王昊鹏 杨军 +1 位作者 周文章 陈先华 《Journal of Southeast University(English Edition)》 EI CAS 2016年第1期99-105,共7页
To investigate the validity of two dynamic modulus predictive models( Witczak 1-37 A viscosity-based model and Witczak 1-40 D shear modulus-based model) in the context of Jiangsu, and evaluate the effect of differen... To investigate the validity of two dynamic modulus predictive models( Witczak 1-37 A viscosity-based model and Witczak 1-40 D shear modulus-based model) in the context of Jiangsu, and evaluate the effect of different mixture design variables( aggregate gradations, binder type, and volumetric properties) on dynamic modulus E*, asphalt mixtures commonly used in the local surface layer, including Sup-13 and AC-13, are prepared in the laboratory and their dynamic modulus E*values are predicted based on the above mentioned models. The corresponding asphalt tests, including viscosity and dynamic shear modulus tests, are also carried out to obtain the prediction model parameters. The test results showthat binder type and asphalt content have a significant impact on dynamic modulus.There is a good correlation between the E*values based on above two predictive models and the measured E*, while a relatively lower bias can be expected from Witczak 1-37 A model. The test results can be used for the calibration of dynamic modulus with higher accuracy. 展开更多
关键词 dynamic modulus prediction models asphalt pavement Witczak 1-37A Witczak 1-40D mechanistic empirical pavement design guide
下载PDF
AN ANALYTICAL SOLUTION TO LONGITUDINAL VIBRATION OF A PILE OF ARBITRARY SEGMENTS WITH VARIABLE MODULUS 被引量:27
20
作者 Wang Teng Wang Kuihua Xie Kanghe 《Acta Mechanica Solida Sinica》 SCIE EI 2001年第1期67-73,共7页
The vibration problem of a pile of arbitrary segments withvariable modulus modules under ex- citing force is established, inwhich the influence of the soil under pile toe and the surroundingsis tak- en into account. W... The vibration problem of a pile of arbitrary segments withvariable modulus modules under ex- citing force is established, inwhich the influence of the soil under pile toe and the surroundingsis tak- en into account. With Laplace transforms, the transmitfunctions for velocity and displacement of pile are derived.Furthermore, in terms of the convolution theorem and inversed Laplacetransform, an analytical solution for the time domain response of apile subjected to semi-sine impulse is developed, which is thetheoretical basis of the sonic method in pile integrity testing. Basedon the solution, the vibration properties of pile with sharp orcontinuous modulus are studied. The validity of this approach isverified through field dynamic tests on some engineering piles. Itshows that the theoretical predic- tion ad the response of the pileare in good agreement. 展开更多
关键词 pile with variable modulus longitudinal vibration Laplace transforms
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部