Effects of Three Different Diluents on Quality of Boar Semen Stored at 17℃

To investigate the effects of different diluents on the quality of the boar semen stored at 17℃, and assess the relationship between sperm motility and the relative levels of enzymes, three commercial diluents （Diluent I, Diluent II and Diluent III） and three boar breed semens （Yorkshire, Landrace and Duroc） were utilized. The sperm motility, effective survival time, survival index, catalase （CAT）, the total anti-oxidative capacity （T-AOC） and malondialdehyde （MDA） levels were evaluated. The results showed that there were significant interaction effects between diluents and breeds on the boar sperm motility （P〈0.001）, survival time （P〈0.001）, CAT levels （P〈0.001） and T-AOC levels （P〈0.001）, but neither effects nor interaction effects between diluents and breeds on survival index （P〉0.05）. All of the parameters varied significantly with the increase of the storage time （P〈0.001）. The survival time increased 12.9% in Yorkshire boar semen diluted with Diluent III than with Diluent II, while the survival time increased 6.6% in Landrace boar semen diluted with Diluent II than with Diluent III. Both CAT and T-AOC levels were significantly positive correlated with sperm motility in all the three boar breeds （P〈0.001）, while MDA levels were significantly negative correlated with sperm motility （P〈0.001）. These results indicated that Diluent III and Diluent II were the optimal commercial diluents for Yorkshire and Landrace boar semen stored at 17 ℃, respectively.

Solid state transformation of <i>cis</i>and <i>trans</i>methylcyclopentadienyl molybdenumdicarbonyltriphenylphosphineiodide on pelleting utilizing different diluents

[(η5-C5H4Me)Mo(CO)2PPh3I] undergoes solid state transformation on the formation of a good pellet for FT IR measurement. There was a formation of the products mixture on pelleting using different diluents of group I metal salts on either the cis or the trans isomer of the [(η5-C5H4Me)Mo(CO)2PPh3I] complex. The cis or the trans isomer gave the same IR spectra i.e. a mixture of cis and trans isomer of the complex. It does not matter the isomer started with in the course of solid state transformation reaction, an equilibrium ratio of 30/70 (trans/cis) will still be achieved. The solid state IR spectra show very strong peaks at νco 1957, 1947 and strong peaks at 1867, 1853 cm–1. The individual IR cis/trans isomer will therefore show at 1947 and 1853/1957 and 1867 cm–1. The solution IR spectra gave, cis = 1961, 1875 and trans = 1963, 1882 cm–1 in dry CHCl3. Hence, most of the solid state IR measurement of the organometallic complex of the type (η5-C5H4Me)Mo(CO)2(PPh3)I on pelleting will give isomer mixture.

SELECTION OF DILUENTS FOR COPPER EXTRACTION FROM OIL PRODUCTS

ＳＥＬＥＣＴＩＯＮＯＦＤＩＬＵＥＮＴＳＦＯＲＣＯＰＰＥＲＥＸＴＲＡＣＴＩＯＮＦＲＯＭＯＩＬＰＲＯＤＵＣＴＳ＊ＬｕｏＡｉｐｉｎｇＺｈａｎｇＱｉｘｉｕ（ＤｅｐａｒｔｍｅｎｔｏｆＮｏｎｆｅｒｒｏｕｓＭｅｔａｌｕｒｇｙ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓ...

Effect of diluents on the extraction of praseodymium and samarium by Cyanex 923 from acidic nitrate medium

The solvent extraction of Pr(Ⅲ) and Sm(Ⅲ) with trialkyl phosphine oxide(Cyanex 923) in chloroform,carbon tetrachloride,n-octane,cyclohexane,1,2-dichloroethane,benzene,toluene,xylene and nitrobenzene from acidic nitrate medium was investigated.On the basis of slope analysis data,the composition of the extracted species was determined as(M(NO3)3?2CY923),CY923 refers to Cyanex 923.The values of the equilibrium constants and the separation factors were calculated.The effect of the diluents on the metal extracti...

Adding chitosan nanoparticles of green tea extract in diluent and thawing temperatures ameliorate the post-thawed quality of Boer buck semen

Objective:To improve the quality of post-thawing Boer buck semen for artificial insemination by adding green tea extract chitosan nanoparticles to skimmed egg yolk diluent,and the proper thawing temperature.Methods:The ejaculate of Boer buck was added to skimmed egg yolk diluent without(the control group)and with adding 1μg of chitosan nanoparticles of green tea extract per mL of diluent(the treatment group).Then,the diluted semen was filled in French mini straws containing 60×106 live sperm per straw,frozen in a standard protocol,and stored as frozen semen at−196℃for a week.Six replicates from each group were diluted for 30 s at 37℃or 39℃sterile water to evaluate the semen quality.Results:Post-thawing(at 37℃or 39℃)of live sperm,progressive motility,and plasma membrane integrity were lower compared to those of the pre-freezing stage(P<0.05).Thawing at 37℃resulted in no significant difference in live sperm,progressive motility,and plasma membrane between the control group and the treatment group(P>0.05).The live sperm,progressive motility,and plasma membrane of the treatment group in the pre-freezing stage,and post-thawed at 39℃were higher compared to those of the control group(P<0.05).There was no significant difference in malondialdehyde(MDA)concentration,DNA fragmentation,and catalase concentration of thawing at 37℃compared to those of 39℃in the same group.The MDA concentration and DNA fragmentation in thawing at 37℃and 39℃of the treatment group were significantly lower than those of the control group(P<0.05).However,the catalase concentration in thawing at 37℃and 39℃of the treatment group was not significantly different than the control group(P>0.05).Conclusions:Higher quality post-thawing Boer buck semen is achieved by adding 1μg/mL of chitosan nanoparticles of green tea extract to the skimmed egg yolk diluent and thawing at 39℃.

Methanolic pomegranate dried peel extract improves cryopreserved semen quality and antioxidant capacity of rams

Objective:To select the appropriate concentrations of methanolic pomegranate extract supplemented in rams’semen extender for obtaining the best-cryopreserved semen quality.Methods:Tris-based semen extender was supplemented with 0.0,0.40,0.48,and 0.56 mg/mL pomegranate peel methanolic extract to extend semen collected from five native rams twice weekly for two months(n=80).Pooled(n=16)post-thaw semen characteristics were determined.Thawed seminal plasma of all supplemented and control groups were used to measure malondialdehyde(MDA),nitric oxide(NO),glutathione peroxidase(GPx),superoxide dismutase(SOD),ascorbic acid,zinc,copper,total cholesterol,low-density lipoproteins(LDL),lactate dehydrogenase(LDH),and alkaline phosphatase(ALP).Results:The supplementation of Tris-based semen extender with 0.48 mg/mL semen extender resulted in the highest post-thaw sperm total motility(P<0.001),sperm progressive motility(P<0.001),live sperm(P<0.001),sperm plasma membrane integrity(P<0.001),acrosome integrity(P<0.001),SOD(P<0.05),zinc(P<0.001),total cholesterol(P<0.001),and LDL(P<0.001)with the lowest percentage of abnormal sperm morphology(P<0.001),the lowest lipid peroxidation(MDA,P<0.01),ascorbic acid(P>0.05),and LDH(P>0.05).Conclusions:Pomegranate peel methanolic extract 0.48 mg/mL supplemented to Tris-based semen extender of rams is the best enrichment in preserving the sperm post-thaw characteristics via improving biochemical profiles and antioxidant capacity.

Outstanding performances of graphite||NMC622 pouch cells enabled by a non-inert diluent

Although high salt concentration electrolyte(HCE)can construct effective Li F-rich interphase film and solve the interphasial instability issue of graphite anode,its high cost,high viscosity and poor wettability with electrode materials limit its large-scale application.Generally,localized high concentration electrolyte(LHCE)is obtained by introducing an electrochemically inert diluent into HCE to avoid the above-mentioned problems while maintaining the high interphasial stability of HCE with graphite anode.Unlike traditional inert diluents,1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluropropyl ether(TTE)with electrochemical activity is introduced into propylene carbonate(PC)-based HCE to obtain LHCE-2(1 M LiPF_(6),PC:DMC:TTE=1:1:6.1)herein.Experimental and theoretical simulation results show that TTE participates in the oxidation decomposition and film-forming reaction at the NCM622 cathode surface,conducting a cathode electrolyte interphase(CEI)rich in organic fluorides with excellent electron insulation ability,high structural stability and low interphasial impedance.Thanks to the outstanding interphasial properties induced by LHCE-2,the graphite||NMC622 pouch cell reaches a capacity retention of 80%after 500 cycles at 1 C under room temperature.While at sub-zero temperatures,the capacity released by the cell with LHCE-2 electrolyte is significantly higher than that of HCE and conventional EC-based electrolytes.Meanwhile,the LHCE-2 electrolyte inherits the advantages of TTE flame-resistant,thus improving the safety of the battery.

Diluent decomposition-assisted formation of Li F-rich solid-electrolyte interfaces enables high-energy Li-metal batteries

Passivation by the inorganic-rich solid electrolyte interphase(SEI),especially the LiF-rich SEI,is highly desirable to guarantee the durable lifespan of Li metal batteries(LMBs).Here,we report a diluent with the capability to facilitate the formation of LiF-rich SEI while avoiding the excess consumption of Li salts.Dissimilar to most of reported inert diluents,heptafluoro-l-methoxypropane(HM) is firstly demonstrated to cooperate with the decomposition of anions to generate LiF-rich SEI via releasing Fcontaining species near Li surface.The designed electrolyte consisting of 1.8 M LiFSI in the mixture of1,2-dimethoxyethane(DME)/HM(2:1 by vol.) achieves excellent compatibility with both Li metal anodes(Coulombic efficiency~99.8%) and high-voltage cathodes(4.4 V LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NMC811) and 4.5 V LiCoO_(2)(LCO) vs Li^(+)/Li).The 4.4 V Li(20μm)‖NMC811(2.5 mA h cm^(-2)) and 4.5 V Li(20μm)‖LCO(2.5 mA h cm^(-2)) cells achieve capacity retentions of 80% over 560 cycles and 80% over 505 cycles,respectively.Meanwhile,the anode-free pouch cell delivers an energy density of~293 W h kg^(-1)initially and retains 70% of capacity after 100 deep cycles.This work highlights the critical impact of diluent on the SEI formation,and opens up a new direction for designing desirable interfacial chemistries to enable high-performance LMBs.

Fabrication and characterization of Al_2O_3-metal composite coating on steel plate with nonpressure combustion synthesis

Al2O3-metal composite coatings with different reactants and diluents were fabricated on mild steel plate with nonpressure combustion synthesis process. The coat-ings were characterized by means of X-ray diffraction, scanning electron microscopy, and energy-dispersive spec-trometry, respectively. Thermal shock tests were carried out to determine the bond strength of the coating with the steel substrate. The results indicate that the coating is composed of α-A1203, α-（Fe-Cr） and Al2SiO5 as the main phases. It is found that the coating with the diluents of Al2O3-SiO2 and transition layer of Al2O3-Cr presents the hi.ghest hardness of 2270 HV0.2 and the lowest porosity of 3.93 %. Owing to a metallurgical bond of the coating-to-substrate, the coating exhibits a good thermal shock resistance.

Artificial Insemination of Cherry Valley Ducks with Muscovy Ducks

[Objective] To explore artificial insemination technique for production of mule ducks. [Method] Female Cherry Valley ducks were artificially inseminated with semen collected from male Muscovy ducks by massage method and vagina-insemination method to investigate the effects of insemination dose, insemination interval, insemination time and diluents on fertilization rate. [ Result ] The average fertilization rate was only 39.58%, when the female Cherry Valley ducks naturally mated with the male Muscovy ducks. However, it was increased to 74.79% by artificial insemination. The fertilization rate was 75.24% after semen was diluted by PBS buffer, while it was 75.16% after semen was diluted by Lake＇s buffer; however, there was not significant difference between the fertilization rate of the diluted semen and that of fresh semen （74.10%）. After semen was respectively diluted by PBS buffer and Lake＇s buffer and then stored at 5 ℃ for 24 h, the fertilization rate was low, respectively 23.76% and 34133%. [ Conclusion] Artificial insemination technology can reduce insemination dose and increase fertilization rate in production of mule ducks.

Medium Term Survival of Bovine Caudal Epididymal Sperm under Conditions Based on Epididymal Fluid Characteristics

Fresh semen has a very limited life span after it leaves the gonad. The relative research shows that the epididymal plasma provides a special environment to spermatozoa for survival. In this study, the osmolarity and protein concentration of caput and caudal bull epididymis were analyzed. Bovine caudal epididymal sperm were incubated in different protein and sorbitol combinations of CEP-2 diluents at 4 ℃ for 120 h and sperm viability was assessed. Under this condition, sperm viability was greater than 60% after 5 d. The osmolarity of caput and caudal epididymis were （287.0 ± 13.7） and （310.8 ± 17.0 ） mOsm, respectively. The protein concentration of caput and caudal epididymis were （ 37.43 ± 12.55 ） and （50.58±11.08） mg/mg, respectively. This may have an application in the animal production industry.

CALCULATION OF ADIABATIC TEMPERATURE THROUGH COMPUTER PROGRAM IN PROCESS OF COMBUSTION SYNTHESIS

The adiabatic temperature in the process of self-propagating high temperature synthesis iscalculated through FOXBASE language program on the base of establishing thermodynamic datapool concerned.The adiabatic temperature of some common self-propagating high temperaturesynthesis has been calculated,and the computed results are compared with the adiabatic tempera-ture reported.At the same time,the curve about the influence of preheating temperature andadding diluent on Tadis drawn as an example.

Effect of diluent on interfacial emulsion in copper solvent extraction

The organic phase extracted from interfacial crud of copper solvent extraction at Dexing Copper Mine was analyzed for its different components by combined gas chromatography mass spectroscopy. It was found that the main impurities in organic phase were methylnaphthalenes and di methylnaphthalenes which originated from commercial 260# kerosene used as diluent. It was found that the impurities containing diluent was unfavorable to phase disengagement. Methods were suggested to improve diluent properties to prevent stable interfacial emulsion.

Synthesis of a Novel UV-Curable Diluent Benzyl Glycidyl Ether Acrylate and Its Application

A novel UV-curable diluent benzyl glycidyl ether acrylate(BGEA) was synthesized by utilizing benzyl glycidyl ether(BGE) and acrylic acid(AA) as starting materials,N,N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor.The optimum synthetic conditions were that the concentration of N,N-dimethylbenzylamine was 0.90% of reactants by weight,the concentration of p-hydroxyanisole was 0.20% of reactants by weight,the reaction temperature was 90-100℃,and the molar ratio of BGE to AA was 1.00:1.10.The experiment shows that BGEA is a kind of good diluent.The mechanical properties of the UV-cured films with BGEA as diluent to prepare UV-curing coating were superior to that of the UV-cured films with butyl acrylate as diluent to prepare UV-curing coating.

INFLUENCE OF ALKALI HALIDE ADDITIONS ON TANTALUM POWDER PRODUCTION

ＩＮＦＬＵＥＮＣＥＯＦＡＬＫＡＬＩＨＡＬＩＤＥＡＤＤＩＴＩＯＮＳＯＮＴＡＮＴＡＬＵＭＰＯＷＤＥＲＰＲＯＤＵＣＴＩＯＮ￥ＣｈａｉＬｉｙｕａｎ；ＺｈｏｎｇＨａｉｙｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＮｏｎｆｅｒｒｏｕｓＭｅｔａｌｌｕｒｇｙ，ＣｅｎｌｒａｌＳｏｕ...

High-performance localized high-concentration electrolytes by diluent design for long-cycling lithium metal batteries

Electrolyte design is essential for stabilizing lithium metal anodes and localized high-concentration electrolyte(LHCE) is a promising one. However, the state-of-the-art LHCE remains insufficient to ensure long-cycling lithium metal anodes. Herein, regulating the solvation structure of lithium ions in LHCE by weakening the solvating power of diluents is proposed for improving LHCE performance. A diluent,1,1,2,2,3,3,4,4-octafluoro-5-(1,1,2,2-tetrafluoroethoxy) pentane(OFE), with weaker solvating power is introduced to increase the proportion of aggregates(an anion interacts with more than two lithium ions,AGG-n) in electrolyte compared with the commonly used 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether(TTE). The decomposition of AGG-n in OFE-based LHCE intensifies the formation of anion-derived solid electrolyte interphase and improves the uniformity of lithium deposition. Lithium metal batteries with OFE-based LHCE deliver a superior lifespan of 190 cycles compared with 90 cycles of TTE-based LHCE under demanding conditions. Furthermore, a pouch cell with OFE-based LHCE delivers a specific energy of 417 Wh/kg and undergoes 49 cycles. This work provides guidance for designing high-performance electrolytes for lithium metal batteries.

Fabrication and Properties of a New Reactive Diluent for Cationic UV Curing

The reactive diluent prepared by siloxane modified Trimethylene oxide can improve the performance of the UV curing system.Therefore,1,7-bis[(3-ethyl-3-methoxyoxacylobutane)propyl]octadecylosiloxane(BEMOPOMTS)was synthesized from diethyl carbonate,trimethylopropanes,allyl bromide,and 1,1,3,3,5,5,7,7-octadecylosiloxane as the main raw materials.BEMOPOMTS can be used as reactive diluents in the field of cationic UV curing.It has good thermal stability,and the addition of BEMOPOMTS significantly improves the tensile strength and elongation at break of epoxy resin.Compared with the pure epoxy resin,adding 20%BEMOPOMTS increased the elastic modulus by 25%to 677 MPa.

Solvent Extraction in Hydrometallurgy: Present and Future

During the past 10 years, there have been incremental advances in the application of solvent extraction to process hydrometallurgy. The most cited areas in the literature include chemistry, chemical engineering, pilot plants, and plant operation. Within these areas, there were considerable interest in synergism, diluents, degradation, contactors, surfactants, hydrometallurgical applications, environmental and secondary applications, and health and safety. The summary to the present is followed by a prediction for the future in the above areas of interest. These include the use of speciation; improved understanding of the role of surfactants on the system; optimization through modelling, pilot plants, and contactor selection; improvements in plant operation; further new applications; and plant safety. The review has indicated that considerable knowledge is now available to optimize and improve on process design and plant applications.

INVESTIGATION ON COPOLYMERIZATION KINETICS OF para-CHLOROMETHYLSTYRENE WITH m-AND p-DIVINYLBENZENES

Starting from the nineteen-sixties, pure para-chloromethylstyrene (p-CMS) has been synthesized and used to investigate the relationship between structure and properties of copolymers. However, up to now, there has been no report available on the investigation of copolymerization kinetics of p-CMS with p-divinylbenzene (p-DVB)

Synthesis of Eugenol Bio-based Reactive Epoxy Diluent and Study on the Curing Kinetics and Properties of the Epoxy Resin System

In this study, monoglycidyl silyl etherated eugenol(GSE) was synthesized as reactive epoxy diluent, and the chemical structure of GSE, intermediates, and products were characterized by Fourier transform infrared spectroscopy(FTIR) and nuclear magnetic resonance(~1 H-NMR). GSE existed as a potential bio-based reactive diluent for petroleum-based epoxy resin. The curing kinetics of EP/HHPA/GSE system was studied by non-isothermal DSC method. The kinetics parameters were calculated by using the Kissinger model, Crane model, Ozawa model, and β-T(temperature-heating rate) extrapolation, respectively. In addition, the effects of GSE on the thermo-mechanical properties and thermal stability of EP/HHPA/GSE systems were studied, indicating that GSE can effectively improve the toughness and thermal decomposition temperature of the epoxy system.