Layered Coded Cache Placement and Cooperative Delivery with Sharing Links in Satellite-Terrestrial Integrated Networks

Cooperative utilization of multidimensional resources including cache, power and spectrum in satellite-terrestrial integrated networks(STINs) can provide a feasible approach for massive streaming media content delivery over the seamless global coverage area. However, the on-board supportable resources of a single satellite are extremely limited and lack of interaction with others. In this paper, we design a network model with two-layered cache deployment, i.e., satellite layer and ground base station layer, and two types of sharing links, i.e., terrestrial-satellite sharing(TSS) links and inter-satellite sharing(ISS) links, to enhance the capability of cooperative delivery over STINs. Thus, we use rateless codes for the content divided-packet transmission, and derive the total energy efficiency(EE) in the whole transmission procedure, which is defined as the ratio of traffic offloading and energy consumption. We formulate two optimization problems about maximizing EE in different sharing scenarios(only TSS and TSS-ISS),and propose two optimized algorithms to obtain the optimal content placement matrixes, respectively.Simulation results demonstrate that, enabling sharing links with optimized cache placement have more than 2 times improvement of EE performance than other traditional placement schemes. Particularly, TSS-ISS schemes have the higher EE performance than only TSS schemes under the conditions of enough number of satellites and smaller inter-satellite distances.

Unraveling the Impact of Direct-Acting Antivirals on Hepatitis-Linked Cirrhosis: A Comprehensive Analysis of Fibrosis, Child Score, and Disease Progression

The treatment of hepatitis C has undergone a significant boom since the advent of direct acting antivirals (DAA). Indeed, the interferon-ribavirin combination that has been used to treat hepatitis C has a virological response in only 45% of cases with significant side effects. The advent of direct-acting antivirals has changed the prognosis of cirrhotic patients with hepatitis C. DAAs have ensured a sustained viral response in the majority of patients. Our work aims to see the evolution of hepatitis C patients at the cirrhosis stage under DAA. We conducted a retrospective study over 15 years (January 2009, January 2024) including all patients with post-viral cirrhosis C, whom we divided into two groups: group A, cirrhotic patients who received ribavirin and interferon, and group B, patients on DAA. From January 2009 to January 2024, we conducted a study of 182 patients with viral hepatitis C, including 102 cirrhotic patients. The mean age was 55 years. 66% of patients were initially treated with the ribavirin interferon combination, while 34% received direct-acting antivirals (DAAs). Since the introduction of DAAs, the most commonly used regimens have been sofosbuvir/daclatasvir with or without ribavirin and sofosbuvir/ledipasvir with or without ribavirin. Group A achieved sustained virological response (SVR) in 60% of cases, with notable side effects. In Group B, SVR was 98.18%, with improved tolerability and fewer side effects than previous treatments. Fifteen patients developed hepatocellular carcinoma (HCC), with a significantly lower mortality rate in those treated with DAAs compared with pegylated dual therapy (p: 0.001).

Zhongshan:Embracing New Links

On June 30,2024,the much-anticipated Shenzhen-Zhongshan Link officially began trial operation.The world-class cross-sea cluster project integrating two bridges,two islands,and an underwater tunnel is expected to shorten the driving time from Shenzhen to Zhongshan from two hours to 30 minutes,helping create a 30-minute commute circle across the area.As the flow of innovation factors accelerates through the Shenzhen Zhongshan Link,Zhongshan City has been proactively exploring cooperation models such as“Shenzhen headquarters plus Zhongshan manufacturing,”“Shenzhen leading businesses plus Zhongshan support,”and“Shenzhen R&D plus Zhongshan commercialization”to form a one-hour science and technology industrial cooperation circle with Shenzhen and build a more open,coordinated,and efficient regional innovation system.

Percolation transitions in edge-coupled interdependent networks with directed dependency links

We propose a model of edge-coupled interdependent networks with directed dependency links(EINDDLs)and develop the theoretical analysis framework of this model based on the self-consistent probabilities method.The phase transition behaviors and parameter thresholds of this model under random attacks are analyzed theoretically on both random regular(RR)networks and Erd¨os-Renyi(ER)networks,and computer simulations are performed to verify the results.In this EINDDL model,a fractionβof connectivity links within network B depends on network A and a fraction(1-β)of connectivity links within network A depends on network B.It is found that randomly removing a fraction(1-p)of connectivity links in network A at the initial state,network A exhibits different types of phase transitions(first order,second order and hybrid).Network B is rarely affected by cascading failure whenβis small,and network B will gradually converge from the first-order to the second-order phase transition asβincreases.We present the critical values ofβfor the phase change process of networks A and B,and give the critical values of p andβfor network B at the critical point of collapse.Furthermore,a cascading prevention strategy is proposed.The findings are of great significance for understanding the robustness of EINDDLs.

Direct Photolithography of WO_(x)Nanoparticles for High‑Resolution Non‑Emissive Displays

High-resolution non-emissive displays based on electrochromic tungsten oxides(WOx)are crucial for future near-eye virtual/augmented reality interactions,given their impressive attributes such as high environmental stability,ideal outdoor readability,and low energy consumption.However,the limited intrinsic structure of inorganic materials has presented a significant challenge in achieving precise patterning/pixelation at the micron scale.Here,we successfully developed the direct photolithography for WOx nanoparticles based on in situ photo-induced ligand exchange.This strategy enabled us to achieve ultra-high resolution efficiently(line width<4μm,the best resolution for reported inorganic electrochromic materials).Additionally,the resulting device exhibited impressive electrochromic performance,such as fast response(<1 s at 0 V),high coloration efficiency(119.5 cm^(2) C^(−1)),good optical modulation(55.9%),and durability(>3600 cycles),as well as promising applications in electronic logos,pixelated displays,flexible electronics,etc.The success and advancements presented here are expected to inspire and accelerate research and development(R&D)in high-resolution non-emissive displays and other ultra-fine micro-electronics.

Vibration Reduction of Open-chain Flexible Manipulators by Optimizing Independent Motions of Branch Links

In order to suppress vibration in flexible manipulators, a new type of manipulator mechanism with controllable local degrees of freedom is proposed. This mechanism consists of a main chain and some branch links. The main chain is of a flexible open-chain configuration with an end-effector installed at its tip, and the rigid branch links are able to perform active movements. It is proved by kinematics and dynamic analysis that, the branch links bear no direct kinematic relation to the main chain, but their independent motions can strongly affect the dynamic behavior and performance of the flexible manipulator. Then comes a new idea of suppressing vibration, in which independent motions of the branch links are used to suppress the undesired vibration of the flexible main chain through dynamic coupling. On this basis, an optimal method for reducing vibration of flexible manipulators is proposed. Finally, the effectiveness of this method is verified by numerical simulations.

Percolation on networks with dependence links

As a classical model of statistical physics, the percolation theory provides a powerful approach to analyze the network structure and dynamics. Recently, to model the relations among interacting agents beyond the connection of the networked system, the concept of dependence link is proposed to represent the dependence relationship of agents. These studies suggest that the percolation properties of these networks differ greatly from those of the ordinary networks. In particular, unlike the well known continuous transition on the ordinary networks, the percolation transitions on these networks are discontinuous. Moreover, these networks are more fragile for a broader degree distribution, which is opposite to the famous results for the ordinary networks. In this article, we give a summary of the theoretical approaches to study the percolation process on networks with inter- and inner-dependence links, and review the recent advances in this field, focusing on the topology and robustness of such networks.

ON THE DYNAMIC MODELING AND CONTROL OF 2-DOF PLANAR PARALLEL MECHANISM WITH FLEXIBLE LINKS

The object of study is about dynamic modeling and control for a 2degree-of-freedom (DOF) planar parallel mechanism (PM) with flexible links. The kinematic anddynamic equations are established according to the characteristics of mixed rigid and flexiblestructure. By using the singular perturbation approach (SPA), the model of the mechanism can beseparated into slow and fast subsystems. Based on the feedback linearization theory and inputshaping technique, the large scale rigid motion controller and the flexible link vibrationcontroller can be designed separately to achieve fast and accurate positioning of the PM.

电动汽车电控液压制动系统CarSim/Simulink联合仿真研究

针对某款国产电动汽车的电控液压制动系统,文章基于滑移率的比例-积分-微分(PID)控制提出了防抱死制动系统(ABS)模型,以改善车辆制动性能,提高在对开路面上的制动有效性和安全性。首先,使用Simulink软件建立液压电控制动系统的动力学模型;然后,基于滑移率设计PID控制器,并通过1/4车辆模型验证其有效性;最后,利用S函数将ABS控制器的Simulink模型输入CarSim平台中,开展CarSim/Simulink双平台联合控制仿真。结果表明,基于滑移率的PID控制的ABS对比无ABS的车辆,制动性能更加优越,在对开路面上制动稳定性更加明显。

一种MAKLINK图多节点链路建模的路径规划研究

针对传统MAKLINK图规划路径线路改变时,其最优化路径易与环境约束条件冲突的问题,提出了在MAKLINK图中各链路上增加节点数目的方法,以提高系统建模的适应性和鲁棒性。设计的多节点链路通过dijkstra算法得到更为理想的次优化路径,由蚁群算法进行迭代计算获得最优化路径,实现了在保证路径适应度的前提下,提高优化路径对环境约束条件的适应性。实验结果表明,与基本MAKLINK图路径规划算法相比,多节点链路的建模路径规划算法可有效提高次优路径的建模精度,最优路径的适应度值较单节点链路减小了1.43%,具有一定的建模优势。

Dynamic Characteristics of Inter-Satellite Links in LEO Networks

To establish an efficient inter-satellite link (ISL) in an LEO network, the effect of geometric characteristics of ISL on the ISLs and the devices on the LEO satellite should be examined. Because of the continuous movement of the LEO satellite, the time-varying behaviours of the ISL's geometric charactersistics continuously change with the changes of the satellite's position on the orbit. These dynamic geometric characteristics of the ISLs are important for ISL's performance analyzing and the design of the devices on the LEO satellite. This paper describes dynamic geometric characteristics of ISL, analyzes the impact of these regulations on the tracking system of the satellite's antenna and the power adjusting system of the satellite's transmitter, with the Iridium system as an example.

Finite element investigation of steel built-up shear links subjected to inelastic deformations

Non-linear finite element models accounting for large displacements have been used to investigate the behavior of steel built-up shear links that had previously been tested using large-scale experiments. The links were designed using steel grades with yield points ranging from high to low strengths. The objectives of the numerical analyses were to further investigate the non-linear behavior and to correlate the numerical results with experimental observations. Elasto-plastic as well as cyclic stress-strain material properties were incorporated to study the influence of material behavior on the overall shear link response. Non-linear monotonie analyses of the shear links incorporating the cyclic stress-strain steel properties resulted in similar trends in the response as the backbone curves recorded from the physical experiments. The numerical models of built-up shear links utilizing structural grade steels closely correlated to the experimentally recorded shear strength. Models utilizing low yield point steels overestimated the shear strength, which was caused by the characteristics of cyclic behavior of those steels. The detailed numerical models also allowed for investigation of the plastic strain demands on the different components of the link. It was shown that finite element models combined with appropriate stress-strain relationship may be used with confidence to check the design of shear links of different steel grades and sectional geometries.

Numerical Investigation of Mooring Line Damping and the Drag Coefficients of Studless Chain Links

The chain/wire rope/chain combination is a common choice for mooring offshore floating platforms. However, data of the drag coefficients of chain links are rather limited, resulting in uncertainties with the calculations of the drag force, and hence the damping of the mooring system. In this paper, the importance of the selection of the drag coefficient is first investigated. The computational fluid dynamics(CFD) method is then used to determine the drag coefficients of a studless chain under steady flows. Numerical model validation is first completed by simulating a smooth circular cylinder under steady flows. In particular, the performance of different turbulence models is assessed through the comparisons between the calculations and the experimental results. The large eddy simulation(LES) model is finally selected for the simulation of steady flows past a chain. The effects of the Reynolds number on the drag coefficient of a stud-less chain is also studied. The results show that the calculated drag coefficients of a stud-less chain are fairly consistent with the available experimental data.

Foreign Direct Investment with Chinese Characteristics:A Middle Path Between Ownership-Location-Internalization Model and Linkage-Leverage-Learning Model

The majority of multinational enterprises （MNEs） traditionally originate from developed countries. In the last ten years, however, there has been dramatic growth in foreign direct investment （FDI） from China. It is a comparatively new phenomenon that challenges the classic FDI theories. In this paper, we review the pros and cons of two important theories, known as the Owner- ship-Location-Internalization （0LI） model and Linkage-Leverage-Learning （LLL） model, and use the statistical data and company case studies from China to test the plausibility of these two models. We believe that neither of them suits totally： the OLI model is quite use- fill for understanding FDI from China to developing economies, while the LLL model is more powerful for explaining the FDI to de- veloped economies. We argue that the companies from China attain a very advantageous position as intermediates in the global economy They may catch up with the first movers if they integrate OLI-led and LLL-led FDI within one firm. This combination can bring to- gether the most advanced knowledge acquired in developed economies with the knowledge about adaptation needs and the needs for cost reduction in production as expressed in developing economies. It may also accelerate the knowledge transfer globally. We thus fill a gap in research into the geographical pattern of Chinese FDI and offer a deeper understanding of the internationalization of Chinese MNEs and revolving knowledge transfer.

A mechanistic study of flame retardance of novel copolyester phosphorus containing linked pendant groups by TG/XPS/direct Py-MS

The flame retardant mechanism of the copolyester phosphorus containing linked pendant groups was investigated by thermogravimetric （TG）, X-ray photoelectron spectroscopy （XPS） and direct insertion probe pyrolysis mass spectrometry （DP-MS） technique. TG results show that the incorporation of phosphorus containing unit linked pendant groups can destabilize the copolyester due to the cleavage of P-CH2 bond, and phosphorus containing units cannot promote the char-formation of the copolyester during the thermal degradation of the copolyester. XPS spectra indicate that with the increase of the temperature, the P-CH2 bonds of the copolyester break down gradually, the concentration of phosphorus in the condensed phase products decrease gradually and the chemical state of phosphorus does not change in the temperature of 250-380 ℃. Direct pyrolysis MS suggests that the P-CH2 bonds cleavage occurs at pendant groups and species containing phosphorus can volatilize into the gas phase. A flame retardant mechanism is proposed for the gas phase mode of action of the halogen-free copolyester phosphorus containing linked pendant groups.

DYNAMIC SUBSTRUCTURING ANALYSISOF COMPOSITE STRUCTURES WITHNONLINEAR LINKS

The paper deals with the dynamic response prediction of the composite structure,which consists of two linear components coupled by some nonlinear vibration isolators. Based on the measured impulse response functions of the linear components, three kinds of dynamic equations of interfacial integration are proposed and a procedure to transform the dynamic equations of integral type into a set of ordinary differential equations is suggested. Computer simulations and a real test are given to verify the effectiveness of the theoretical results.

《关注石油》教学设计及实施——World Links远程合作学习实践

笔者运用"做中学"的方式,以美国WorldLinks组织的"远程合作学习项目"为理论指导,设计制作了专题网站《关注石油》,并在Internet上开展了这一项目的实践活动。本文介绍了从项目的创建、设计、促进,直到最终成功的完整过程,并对项目学习的案例和成果等内容进行了总结。

Anti-Dead-Zone Integral Sliding Control and Active Vibration Suppression of a Free-floating Space Robot with Elastic Base and Flexible Links

Under the conditions of joint torque output dead-zone and external disturbance,the trajectory tracking and vibration suppression for a free-floating space robot(FFSR)system with elastic base and flexible links were discussed.First,using the Lagrange equation of the second kind,the dynamic model of the system was derived.Second,utilizing singular perturbation theory,a slow subsystem describing the rigid motion and a fast subsystem corresponding to flexible vibration were obtained.For the slow subsystem,when the width of deadzone is uncertain,a dead-zone pre-compensator was designed to eliminate the impact of joint torque output dead-zone,and an integral sliding mode neural network control was proposed.The integral sliding mode term can reduce the steady state error.For the fast subsystem,an optimal linear quadratic regulator(LQR)controller was adopted to damp out the vibration of the flexible links and elastic base simultaneously.Finally,computer simulations show the effectiveness of the compound control method.

A novel similarity measure for mining missing links in long-path networks

Network information mining is the study of the network topology,which may answer a large number of applicationbased questions towards the structural evolution and the function of a real system.The question can be related to how the real system evolves or how individuals interact with each other in social networks.Although the evolution of the real system may seem to be found regularly,capturing patterns on the whole process of evolution is not trivial.Link prediction is one of the most important technologies in network information mining,which can help us understand the evolution mechanism of real-life network.Link prediction aims to uncover missing links or quantify the likelihood of the emergence of nonexistent links from known network structures.Currently,widely existing methods of link prediction almost focus on short-path networks that usually have a myriad of close triangular structures.However,these algorithms on highly sparse or longpath networks have poor performance.Here,we propose a new index that is associated with the principles of structural equivalence and shortest path length(SESPL)to estimate the likelihood of link existence in long-path networks.Through a test of 548 real networks,we find that SESPL is more effective and efficient than other similarity-based predictors in long-path networks.Meanwhile,we also exploit the performance of SESPL predictor and of embedding-based approaches via machine learning techniques.The results show that the performance of SESPL can achieve a gain of 44.09%over GraphWave and 7.93%over Node2vec.Finally,according to the matrix of maximal information coefficient(MIC)between all the similarity-based predictors,SESPL is a new independent feature in the space of traditional similarity features.