Prevention Effects of Pyrazosulfuron-ethyl·Quinclorac 50% WP on Stem and Leaf of Dry Direct Seeded Rice

[Objective] The aim was to explore the prevention effects of pyrazosul-furon-ethyl·quinclorac 50% WP on stem and leaf of dry direct seeded rice. [Method] Totaling 7 drug doses were set in the test and the effects were observed 5, 10, 15 and 30 d after drug application, with the remained weeds surveyed 15 and 30 d after drug application. [Result] The test showed pyrazosulfuron-ethyl·quinclorac 50%WP was safe to rice as treatment agent of stem and leaf, and rice yield increased dramatical y, with the growth rate in 2.1%-49.3%. After the drug application, the prevention effects on Echinochloa crusgal i, Ludwimlia prostrata, Monochoria vamli-nalis, and Zong grass were 92.2%, 96.6%, 93.5%, and 94.8%, and the effects on fresh weight were 94.8%, 97.1%, 93.3% and 94.9%, respectively. [Conclusion] Pyra-zosulfuron-ethyl·quinclorac 50% WP can be taken as treatment agents of stem and leaf of dry direct seeded rice.

Effects of different mechanical direct seeding methods on grain yield and lodging resistance of early indica rice in South China

Direct seeding of rice has become a main planting method due to the low labor input and high economic benefit in South China.Dry direct seeding(DDS)has been widely used for single-season rice planting establishment.However,few studies have examined the performance of early-season indica rice under mechanical dry direct seeding.A two-year field experiment was conducted with two indica rice cultivars(i.e.,Zhongjiazao 17 and Zhuliangyou 819)to study lodging characteristics and grain yield formation under DDS,flooded direct seeding(FDS)and wet direct seeding(WDS)patterns.The results showed that the annual grain yield in DDS was higher by 14.42–26.34%for cultivar ZLY819 and 6.64–24.58%for cultivar ZJZ17 than in WDS and FDS,respectively,and these increases were mainly attributed to the improvement of the panicles.The DDS pattern significantly increased the seedling emergence rate of early indica rice cultivars,and increased total dry weight and crop growth rate.Meanwhile,shorter basal internodes,better stem diameter and stem wall thickness and lower lodging index were found in DDS in contrast to FDS and WDS.In particular,DDS improved the stem lodging resistance.Our results suggested that the appropriate direct seeding method was beneficial for improving the grain yield and lodging resistance of early indica rice.

Chemical Weeding in Dry Direct Seeding Fields of Single Cropping Middlelate Rice

Chemical weeding in dry direct seeding fields of single cropping middle-late rice was studied in Huida vegetable farm of Huizhou City in 2012. The main treatment was herbicide（ pretilachlor ＋ bensulfuron-methyl,Yangguo and butachlor）,and the sub-treatment was application method（ soil treatments,seedling treatment and integrated treatment）. The results showed that 80 g pretilachlor ＋ bensulfuron-methyl（ 36% pretilachlor ＋ 4% bensulfuron-methyl） diluted with 50 kg water could be sprayed or 200 g Yangguo（ 23. 9% butachlor ＋ 1. 1% bensulfuron-methyl） mixed with 15 kg sandy soil could be broadcasted per 667 m2 on the sowing day or the second day under moist condition of soil,which could effectively control weeds in dry direct seeding fields of single cropping middle-late rice.

Water Consumption Processes of Different Planting Models in Rice Production of Northeast China

Different irrigation schemes have different effects on water consumption in rice production.However,few studies have been conducted on the water consumption processes between dry direct seeding rice and transplanting rice under different irrigation schemes.Water consumption process,water use efficiency and correlation effect of water consumption on yield under different planting models in rice production were investigated in northeast China in 2018.Seven treatments were implemented:drip irrigation dry direct seeding rice(DDSR),wet irrigation dry direct seeding rice(WDSR),flooded irrigation dry direct seeding rice(FDSR),transplanting flooded rice(TFR),controlled irrigation transplanting rice(CTR),intermittent irrigation transplanting rice(ITR)and wet irrigation transplanting rice(WTR).Among them,TFR was the control.The results showed that the peaks of the water consumption amount,intensity and its modulus coefficient of the seven treatments all appeared in the middle tillering and the jointing booting stages.The total water consumption amount(ET)and average water consumption intensity of DDSR,WDSR,FDSR and WTR were lower than those of TFR,CTR and ITR.The maximum water use efficiency of yield(WUEy)occurred in DDSR with a value of 3.8 kg·m^(-3).WUEy of DDSR,WDSR and FDSR were significantly higher than those of TFR,CTR and ITR.In the middle tillering and the heading and flowering stages,the water consumption amount of each treatment had a positive effect on yield formation,and the water consumption amount in the late tillering stage had a negative effect on yield formation.The relationship between ET and yield(Y)of dry direct seeding and transplanting planting models showed a quadratic function curve.ET of transplanting planting model had a significant positive impact on Y,and ET of dry direct seeding planting model had no impact on Y.DDSR had the least total water consumption of 199.8 mm·m^(-2),the lowest water consumption intensity of 2.0 mm·d^(-1) and the greatest water use efficiency of 3.8 kg·m^(-3),which suggested that DDSR had the most significant water saving effect.The combination of dry direct seeding planting model and drip irrigation scheme would be a good option for determining a water-saving rice planting model in northeast China.

STUDY ON THE VARIATION MECHANISM OF CARBON CONTENT OF LIQUID IRON IN MELTING GASIFIER

This paper studied the changing principles of carbon content in direct reduction iron (DRI) and liquid iron in the COREX melting gasifier. Under the normal working conditions of experimental equipment, liquid nitrogen was poured into the melting gasifier from its tuyere to cool down quickly. And then seven cross sections were made to study the carburization reaction and its characteristics of the solid iron and the liquid iron, and also the reaction of carbon between the slag and the metal. According to the results, the influences of the thickness of the semi-coke layer and the temperature on the carbon content of liquid iron in the COREX melting gasifier were confirmed.

Comparison of mixed-mode forced-convection solar dryer with and without stainless wire mesh in solar collector

A mixed-mode forced-convection solar dryer(MMFCSD)is a device that utilizes both direct and indirect solar energy.The solar col-lector,which stores thermal energy for indirect solar uses,is an essential component of the dryer.Unfortunately,the thermal effi-ciency of this device is generally low.In this study,a technique was employed to improve the heat transfer of the solar collector in a MMFCSD.The technique involved adjusting the air flow pattern into a swirling flow to disturb the thermal boundary layer on the absorber plate under forced convection by using stainless wire mesh.The experiment was conducted under actual conditions and bananas were used as the drying sample.The experimental results of the thermal efficiency of the solar collector(ƞ_(solar))and the drying efficiency(ƞ_(drying))are presented.The results indicated that the air outlet temperature andƞsolar of the solar collector with stainless wire mesh were higher than the case without stainless wire mesh,reaching a maximum temperature of 46.22°C and 37.97°C,and average ƞ_(solar) of 0.26±0.02 and 0.14±0.01,respectively.The MMFCSD with stainless wire mesh had a higher ƞ_(drying) than the case without stain-less wire mesh,with values of 0.048±0.004 and 0.039±0.003,respectively,resulting in an~23.07%increase.This was attributed to the air swirling flow through the stainless wire mesh and the heat accumulation in the drying chamber,which led to an increase in the drying chamber temperature from 54.03°C to 63.60°C,an increase in the effective moisture diffusivity from 7.28×10^(-7) to 1.19×10^(-6) m^(2)/s and a decrease in the drying time of 5 h 30 min.However,further research is needed to investigate the quality of the dried sam-ples and their economic value.