期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
RATE-CONSISTENT DIRECTIONLET CODESTREAM CREATED BY MODIFIED BFOS ALGORITHM 被引量:1
1
作者 Ma Lihong Mai Dike +1 位作者 Ren Miao Lin Chunyi 《Journal of Electronics(China)》 2010年第1期118-126,共9页
In order to improve the bit allocation efficiency of Directionlet coding,a modified Breiman,Friedman,Olshen and Stone(BFOS) algorithm is suggested for rate consistent truncation.Two modifications are:(1) Dominant dire... In order to improve the bit allocation efficiency of Directionlet coding,a modified Breiman,Friedman,Olshen and Stone(BFOS) algorithm is suggested for rate consistent truncation.Two modifications are:(1) Dominant direction adjustment is proposed to balance the cost of sparse description and segment artifacts caused by discontinuous adjacent direction pairs.(2) Priority related merging is also proposed in the BFOS distortion list to find an optimal trimming element for unequal-importance bit allocation.Experimental results show that block effects could be removed without obvious bpp increment by selecting the dominant direction and its adjustment according to neighborhood homogeneity,and combined multi-PRIority(PRI) based merging of the M-ordered list offers unequal importance allocation and leads to a Peak Signal-to-Noise Ratio(PSNR) gain of 0.4 dB~1.3 dB. 展开更多
关键词 directionlet Dominant direction map Multi-PRIority(PRI) merging Bit distortion based truncation
下载PDF
Real-time Visual Odometry Estimation Based on Principal Direction Detection on Ceiling Vision 被引量:2
2
作者 Han Wang Wei Mou +3 位作者 Gerald Seet Mao-Hai Li M.W.S.Lau Dan-Wei Wang 《International Journal of Automation and computing》 EI CSCD 2013年第5期397-404,共8页
In this paper,we present a novel algorithm for odometry estimation based on ceiling vision.The main contribution of this algorithm is the introduction of principal direction detection that can greatly reduce error acc... In this paper,we present a novel algorithm for odometry estimation based on ceiling vision.The main contribution of this algorithm is the introduction of principal direction detection that can greatly reduce error accumulation problem in most visual odometry estimation approaches.The principal direction is defned based on the fact that our ceiling is flled with artifcial vertical and horizontal lines which can be used as reference for the current robot s heading direction.The proposed approach can be operated in real-time and it performs well even with camera s disturbance.A moving low-cost RGB-D camera(Kinect),mounted on a robot,is used to continuously acquire point clouds.Iterative closest point(ICP) is the common way to estimate the current camera position by registering the currently captured point cloud to the previous one.However,its performance sufers from data association problem or it requires pre-alignment information.The performance of the proposed principal direction detection approach does not rely on data association knowledge.Using this method,two point clouds are properly pre-aligned.Hence,we can use ICP to fne-tune the transformation parameters and minimize registration error.Experimental results demonstrate the performance and stability of the proposed system under disturbance in real-time.Several indoor tests are carried out to show that the proposed visual odometry estimation method can help to signifcantly improve the accuracy of simultaneous localization and mapping(SLAM). 展开更多
关键词 Visual odometry ego-motion principal direction ceiling vision simultaneous localization and mapping(SLAM)
原文传递
Dynamic simulation based method for the reduction of complexity in design and control of Recirculating Aquaculture Systems 被引量:1
3
作者 M.Varga S.Balogh +2 位作者 Y.Wei D.Li B.Csukas 《Information Processing in Agriculture》 EI 2016年第3期146-156,共11页
In this work we introduce the“Extensible Fish-tank Volume Model”that can reduce the complexity in the design and control of the Recirculating Aquaculture Systems.In the developed model we adjust the volume of a sing... In this work we introduce the“Extensible Fish-tank Volume Model”that can reduce the complexity in the design and control of the Recirculating Aquaculture Systems.In the developed model we adjust the volume of a single fish-tank to the prescribed values of stocking density,by controlling the necessary volume in each time step.Having developed an advantageous feeding,water exchange and oxygen supply strategy,as well as considering a compromise scheduling for the fingerling input and product fish output,we divide the volume vs.time function into equidistant parts and calculate the average volumes for these parts.Comparing these average values with the volumes of available tanks,we can plan the appropriate grades.The elaborated method is a good example for a case,where computational modeling is used to simulate a‘‘fictitious process model”that cannot be feasibly realized in the practice,but can simplify and accelerate the design and planning of real world processes by reducing the complexity. 展开更多
关键词 Recirculating Aquaculture Systems Complexity reduction Dynamic simulation Model controller direct Computer Mapping
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部