The Impact of Sun Radiation on the Thermal Comfort in Highly Glazed Buildings Equipped with Floor Heating Systems

Occupants of highly glazed buildings often suffer from thermal discomfort during the mid-seasons when no shadings are used in such buildings,especially when inertial heating systems are used.The present study is devoted to evaluating the impact of long solar beam exposure on the internal thermal discomfort in glazed spaces when heating is implemented through a floor system.A comprehensive experimental study is carried out using an experimental bi-climatic chamber which is fully monitored and controlled,allowing realistic simulations of the dynamic movement of the sun patch on a heated slab.The findings show that a period of discomfort as long as 8 h can occur,and persist far after the sunbeam exposure stops.During this period,the heating slab’s surface temperature,considered from an average point of view,can attain 34°C while the indoor temperature reaches 26°C.Simulations conducted using a previously developed model display a good fit with the measurements.

Analysis of The Current Cituation of Solar Radiation Measurement

This paper mainly discusses the development status of solar radiation measurement technology,it expounds the relevant content of the current world radiation measurement datum and its standardization. Article the direct radiation from the sun,the main measuring principle of total radiation and scattering radiation,this paper discusses the different types of radiation survey measuring elements,measuring range,emphasis and the current widespread use of measurement instruments. The development trend of future solar radiation measurement is put forward,and it is emphasized that nanotechnology and spectrum technology will become the focus of solar radiation instrument research and development.

Multi-Band Antenna with Three Folded Monopoles for Mobile Communication Systems

This paper presents the design and the experimental characterization of a new multi-band antenna consisting of three folded monopoles dedicated to mobile communication systems. The originality of this paper is to get the PMR (Professional or Private Mobile Radio) band with the GSM (Global System for Mobile Communications), DCS (Digital Cellular System) and UMTS (Universal Mobile Telecommunications System) bands. The main lobe of the antenna radiates in the zenith direction with a linear polarization over all bands. It is interesting to design the proposed antenna in order to obtain better performances in terms of directive radiation pattern (especially in the PMR band) in comparison with the already existing antenna systems in the wireless market for similar purposes. The prototype was studied with the software CST-MWS (Micro wave studio 2012). The antenna has been designed and successfully measured.

Performance Assessment of Motorized Solar Photovoltaic Louvers System Using PVSYST Software

In the realm of technological market penetration of solar photovoltaic louvers(PVL)addressing environmental difficulties and the industrial revolution,a new avenue of renewable energy is introduced.Moreover,solar energy exploitation through building façades was addressed through motorized solar photovoltaic louvers(MPVL).On the other hand,proponents exalted the benefits of MPVL overlooking the typical analyses.In this communication,we attempted to perform a thorough industrial system evaluation of the MPVL.This communication presents a methodology to validate the industrial claims about MPVL devices and their economic efficiency and the insight on how geographical location influences their utilization and augment their potential benefits.This task is carried out by evaluating the extent of solar energy that can be harvested using solar photovoltaic system(PVSYST)software and investigating whether existing product claims are associated with MPVL are feasible in different locations.The performance and operational losses(temperature,internal network,power electronics)were evaluated.To design and assess the performance of different configurations based on the geographical analogy,simulation tools were successfully carried out based on different topographical locations.Based on these findings,various factors affect the employment of MPVL such as geographical and weather conditions,solar irradiation,and installation efficiency.tt is assumed that we successfully shed light and provided insights into the complexity associated with MPVL.

The influence of urban three-dimensional structure and building greenhouse effect on local radiation flux

Accurate measurements of the three-dimensional structure characteristics of urban buildings and their greenhouse effect are important for evaluating the impact of urbanization on the radiation energy budget and research on the urban heat island(UHI)effect.The decrease in evapotranspiration or the increase in sensible heat caused by urbanization is considered to be the main cause of the UHI effect,but little is known about the influence of the main factor“net radiant flux”of the urban surface heat balance.In this study,experimental observation and quantitative model simulation were used to find that with the increase of building surface area after urbanization,the direct solar radiation flux and net radiation flux on building surface areas changed significantly.In order to accurately quantify the relationship between the positive and negative effects,this study puts forward the equivalent calculation principle of“aggregation element”,which is composed of a building’s sunny face and its shadow face,and the algorithm of the contribution of the area to thermal effect.This research clarifies the greenhouse effect of a building with walls of glass windows.Research shows that when the difference between absorption rates of a concrete wall and grass is−0.21,the cooling effect is shown.In the case of concrete walls with glass windows,the difference between absorption rates of a building wall and grass is−0.11,which is also a cooling effect.The greenhouse effect value of a building with glass windows reduces the cooling effect value to 56%of the effect of a building with concrete walls.The simulation of changes in net radiant flux and flux density shows that the greenhouse effect of a 5-story building with windows yields 15.5%less cooling effect than one with concrete walls,and a 30-story building with windows reduces the cooling effect by 23.0%.The simulation results confirmed that the difference in the equivalent absorption rate of the aggregation element is the“director”of cooling and heating effects,and the area of the aggregation element is the“amplifier”of cooling and heating effects.At the same time,the simulation results prove the greenhouse effect of glass windows,which significantly reduces the cold effect of concrete wall buildings.The model reveals the real contribution of optimized urban design to mitigating UHI and building a comfortable environment where there is no atmospheric circulation.

Observation and simulation of the diffuse attenuation coefficient of downwelling irradiance in the Polar Ocean

The three-stream radiation transfer model is used to investigate the fluctuation in the underwater diffuse attenuation coefficient of downwelling irradiance in the polar ocean with a high solar zenith angle and different direct radiation proportions.First,the applicability of the three-stream radiation model in the polar region is validated by using 18 in situ observation data from September to October 2009 in the Beaufort Sea.Statistics show that in the absence of sea ice,the average relative errors between the simulation and observation values for 490 nm downwelling irradiance (E_(d)(490)) and its diffuse attenuation coefficient (K_(d)(490)) are 7.04%and 9.88%,respectively.At the stations surrounded by sea ice,the radiation is relatively small due to ice blocking,and the average relative errors simulated by the model reach 15.89%and 15.55%,respectively.Second,simulations with different chlorophyll concentrations and different proportions of direct radiation reveal that a high solar zenith angle has a greater impact on K_(d)(490) in the surface water.K_(d)(490) is less affected by the light field (affected by the solar zenith angle and the proportion of direct radiation) at depths greater than 30 m,and meets the linear relationship with the inherent optical parameters(the sum of the absorption coefficient and backscattering coefficient).The surface K_(d)(490) is still consistent with that at a depth of more than 50 meters under a high solar zenith angle,implying that the surface K_(d)(490) can also be considered as an inherent optical parameter at a high solar zenith angle (greater than 60 degrees).The relative error of obtaining surface K_(d)(490) by using the linear relationship at the 50 m layer is found to be less than 8%in the seawater with chlorophyll concentration greater than0.05 mg m^(-3).The effect of the solar zenith angle and proportion of direct radiation can be ignored when measuring the diffuse attenuation coefficient in the polar region.Finally,the model can correct the ice-induced fluctuation in downward irradiance,allowing for optical research of seawater beneath the ice in the polar ocean.

Induced noise of impeller stuck and passive rotation state in multi-stage pump without power drive under natural flow conditions

The natural flow cooling strategy is commonly employed in modern high-speed vessels and nuclear-powered submarines. These vessels rely on the energy generated by their own speed to drive the cooling system and supply cooling water to the condenser. The circulating pump, which operates without a motor drive under natural flow conditions, is a large resistance component in the cooling system. However, it is also the primary noise source, significantly impacting the vessel’s safe operation and acoustic stealth performance. This study investigates the induced noise characteristics of a multi-stage pump under natural flow conditions by experiment, computational fluid dynamics (CFD), and acoustic finite element method. The analysis encompasses the distribution of the flow field, variations in acoustic power, spectral features of flow-induced noise, and directivity of external field radiation noise under different natural flow conditions. The results show that the acoustic power distribution is correlated with the flow field. When the impeller is stuck, the noise sources primarily concentrate in the flow separation area at the blade’s leading edge, the interface area between the impeller and the guide vane, and the flow shock area inside the guide vane. Conversely, when the impeller rotates passively, the blade wake area has a higher acoustic power. The flow noise spectrum under natural flow conditions mainly exhibits broadband and discrete characteristics. Additionally, the pump structure influences the external field radiation noise, and its directivity varies with different flow rates and characteristic frequencies. This study provides valuable insights into optimal design to reduce the noise of the circulating pump in the vessel’s natural flow cooling system. It is essential for ensuring the safe operation and acoustic stealth performance of high-speed vessels and nuclear-powered submarines.