Direct simple shear tests are considered to be simple laboratory tests that are capable of imposing a cyclic loading that is analogous to that induced by earthquakes. A realistic evaluation of the test results demands...Direct simple shear tests are considered to be simple laboratory tests that are capable of imposing a cyclic loading that is analogous to that induced by earthquakes. A realistic evaluation of the test results demands a profound micromechanical investigation of specimens. Three-dimensional discrete element method models of a stacked-ring simple shear test were constructed, in which monotonic and cyclic loadings were applied under constant-volume conditions, and good agreement between the monotonic and cyclic macromechanical behaviors was noted. Micromechanical properties of specimens that were subjected to a cyclic loading are discussed in terms of lateral and intermediate principal stress development, fabric anisotropy, and principal stress rotation. The stress and strain states inside the specimen were investigated and it was shown that despite the uniform stress distribution inside the specimen, the volumetric strain distributes non-uniformly during loading and the non-uniformity grows with cycling, which leads to localized zones of dilative and contractive behavior.展开更多
文摘Direct simple shear tests are considered to be simple laboratory tests that are capable of imposing a cyclic loading that is analogous to that induced by earthquakes. A realistic evaluation of the test results demands a profound micromechanical investigation of specimens. Three-dimensional discrete element method models of a stacked-ring simple shear test were constructed, in which monotonic and cyclic loadings were applied under constant-volume conditions, and good agreement between the monotonic and cyclic macromechanical behaviors was noted. Micromechanical properties of specimens that were subjected to a cyclic loading are discussed in terms of lateral and intermediate principal stress development, fabric anisotropy, and principal stress rotation. The stress and strain states inside the specimen were investigated and it was shown that despite the uniform stress distribution inside the specimen, the volumetric strain distributes non-uniformly during loading and the non-uniformity grows with cycling, which leads to localized zones of dilative and contractive behavior.
