Narrow-band interference excision in spread-spectrum systems using new N-sigma algorithm based on fuzzy threshold

The key to narrow-band interference excision in frequency domain is to determine the excision thresh- old in direct-sequence spread-spectrum （DS-SS） systems. The excision threshold is a non-linear function related to the number and the power of interference, and attempting to get the exact relation of threshold related to the number and the power of interference is almost impossible. The N-sigma algorithm determines the excision threshold using subsection function; however, the excision threshold determined by this method is not exact. A new method to determine the threshold of N-sigma algorithm is proposed. The new method modifies the scale factor N by use of the membership function. The threshold determined by this method is consecutive and smooth, and it is closer to the fact than that of the initial N-sigma algorithm. The GPS signal and single-tone （CW） interference （that is, typical narrow-band interference） are implemented in the simulation, and the results are presented to demonstrate the validity of the new algorithm.

An improved method of generating the self-balanced chaotic spread-spectrum code

An improved method of generating the self-balanced chaotic spread-spectrum code is presented. The chaotic-map pseudorandom sequence is used as the generated source. After a series of processing two-valued quantization, inversion, all upside down, radix-S block upside down and shift combination, the proposed code is achieved. Theory analysis and simulation performance of the improved code are illustrated. And the results indicate that the suggested method gains a better performance than the traditional one by reasonable choices of the initial value and the S parameter in the im- proved method. Meanwhile the chaotic sequence＇ s characteristic of large addresses is inherited when the chaotic-map is used as the source. This advantage makes this improved code very suitable for the multiple access application in communication system.

Secure Spread-Spectrum Watermarking for Telemedicine Applications

This paper presents a secure spread-spectrum watermarking algorithm for digital images in discrete wavelet transform (DWT) domain. The algorithm is applied for embedding watermarks like patient identification /source identification or doctors signature in binary image format into host digital radiological image for potential telemedicine applications. Performance of the algorithm is analysed by varying the gain factor, subband decomposition levels, size of watermark, wavelet filters and medical image modalities. Simulation results show that the proposed method achieves higher security and robustness against various attacks.

Blind Estimation of Long Code DSSS Signal Based On Subspace Tracking

Aiming at solving the blind estimation problem of dispreading spectrum sequence under low SNR, a spread-spectrum estimation algorithm based subspace tracking is studied in this paper. This method avoids the direct eigen decomposition, using the sliding window technique to obtain the code synchronization, then use segmentation subspace tracking method estimate spreading sequence and splice in a certain order to achieve pseudo-code blind estimation. The results show that the algorithm can complete the accurate estimation of PN code sequence in low SNR conditions, reduce the amount of data storage and be easy hardware implementation

Rapid Coherent Acquisition for PN Sequence UsingOptimum Search Algorithm

An optimun search algorithm for the coherent acquisition in direct-sequence spread-spectrum （DSSS） receivers is proposed and analyzed in this paper. The system consists of two major parts： a phase region estimator and a phase alignment detector. We use an auxiliary sequence to correlate the incoming signal in the phase region estimator. Since the cross-correlation value between the auxiliary sequence and the incoming PN signal has linear magnitude, and can provide the direction for the phase updating, an optimum search algorithm, try and error method, can be adopted to obtain the phase region information of the incoming signal. The mean acquisition time is derived through the signal flow graph theory. The time is compared with that of the conventional serial search scheme, and the results show that the proposed scheme can achieve coarse acquisition significantly faster than the conventional scheme.

All-digital Carrier Frequency Tracking Method in LEO DS/SS Communication

An efficient method to track the carrier frequency which is recommended to use in low earth orbit(LEO) direct-sequence spread-spectrum(DS/SS) communication system is given. The carrier frequency drifts quicker in LEO DS/SS communication system, its tracking problem becomes much more important especially in digital receiver with the limits of physical shape and power. Under the condition of coarse carrier frequency synchronization, a digital tracking method based on least square method(LSM) is proved to be a quick, simple and efficient method. Numerical results and charts are given.

Modeling and Simulation of CDMA Codes in Scilab

Prior to hardware implementation, simulation is an important step in the study of systems such as Direct Sequence Code Division Multiple Access (DS-CDMA). A useful technique is presented, allowing to model and simulate Linear Feedback Shift Register (LFSR) for CDMA. It uses the Scilab package and its modeling tool for dynamical systems Xcos. PN-Generators are designed for the quadrature-phase modulation and the Gold Code Generator for Global Positioning System (GPS). This study gives a great flexibility in the conception of LFSR and the analysis of Maximum Length Sequences (MLS) used by spread spectrum systems. Interesting results have been obtained, which allow the verification of generated sequences and their exploitation by signal processing tools.

An advanced monolithic digitalized random carrier frequency spread-spectrum clock generator for EMI suppression

A novel monolithic digitalized random carrier frequency modulation spread-spectrum clock generator （RCF-SSCG） is proposed.In this design,the output frequency of the proposed RCF-SSCG changes with the intensity of the capacitive charge and discharge current.Its analytical model is induced and the effect of the modulation parameters on the spread spectrum is numerically simulated and discussed.Compared with other works,this design has the advantages of small size,low power consumption and good robustness.The circuit has been fabricated in a 0.5μm CMOS process and applied to a class D amplifier in which the proposed RCF-SSCG occupies an area of 0.112 mm^2 and consumes 9 mW.The experimental results confirm the theoretical analyses.

Spatiotemporal Chaotic Synchronization and Spread-Spectrum Communication

A method of Direct Sequence Spread-Spectrum(DS/SS)corn,nunication based on synchronizedspatiotemporal chootic sequences is proposed.We use Coupled Logistic Maps(CLM)to generate the chaotictimes sequences.This coupled mop lattices has long chaotic transient and can be recovered easily.Therobustness and the error probability is discussed and the advantage of the method in Spectral spreading andsecure communication is demonstrated.