期刊文献+
共找到1篇文章
< 1 >
每页显示 20 50 100
Active Air Venting of Mold Cavity to Improve Performance of Injection Molded Direct Joining
1
作者 Fuminobu Kimura Shotaro Kadoya Yusuke Kajihara 《Nanomanufacturing and Metrology》 2021年第2期109-117,共9页
A surface micro-/nano-structured metal plate can be joined with an injection molded plastic piece in a mold,which has been named injection molded direct joining(IMDJ).The injected plastic melt infiltrates the micro-/n... A surface micro-/nano-structured metal plate can be joined with an injection molded plastic piece in a mold,which has been named injection molded direct joining(IMDJ).The injected plastic melt infiltrates the micro-/nano-structure,e.g.,a porous structure with micro/nano pores,on the metal plate while flowing in the mold cavity where the metal plate is inserted.After solidification of the plastic,the metal and plastic materials are directly joined via the micro-/nano-structured metal surface.Since air is trapped by the plastic melt,it is easily imagined that the air in the mold cavity prevents the melt plastic from contacting the metal surface and infiltrating the micro-/nano-structure,which could result in poorer joining performance.To avoid the prevention of the air for the better joining performance,the present study proposes a system actively venting the mold cavity during injection molding.To apply the active venting to IMDJ,venting and sealing systems were newly developed.In addition,a system measuring air pressure of the mold cavity was developed.The proposed system was evaluated by a measurement of joining strengths of IMDJ specimens that were produced under various conditions.From the results,it is concluded that the active venting does not necessarily have a positive effect in any cases:the effect depends on the type of surface micro-/nano-structure. 展开更多
关键词 Metal-plastic direct joining Micro-/nano-structured surface Injection molding Active venting Mold cavity pressure measurement
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部