Vehicle detection method for expressway by MPEG compressed domain

A method which extracts traffic information from an MPEG-2 compressed video is proposed. According to the features of vehicle motion, the motion vector of a macro-block is used to detect moving vehicles in daytime, and a filter algorithm for removing noises of motion vectors is given. As the brightness of the headlights is higher than that of the background in night images, discrete cosine transform （DCT）coefficient of image block is used to detect headlights of vehicles at night, and an algorithm for calculating the DCT coefficients of P-frames is introduced. In order to prevent moving objects outside the expressway and video shot changes from disturbing the detection, a driveway location method and a video-shot-change detection algorithm are suggested. The detection rate is 97.4% in daytime and 95.4% in nighttime by this method. The results prove that this vehicle detection method is effective.

基于余弦相似度的动态语音特征提取算法

为进一步研究语音特征提取方法,分析了基于逆离散余弦变换倒谱系数(IDCT CC)的语音特征,利用频域语音信号间的余弦相似度(cosine similarity)特性将IDCT CC进行层次聚类,得到14维频域语音特征向量(feature vector),称之为C-vector。实验中,建立基于高斯混合模型(Gaussian mixture model,GMM)的说话人识别模型对C-vector进行识别精度和时间的讨论,并与经典的梅尔频率倒谱系数和等频域倒谱系数(histogram of DCT cepstrum coefficients,HDCC)进行对比实验。通过具体的实验结果比较,提出的C-vector在识别精度方面比MFCC和HDCC分别高出7%和5%。而且,C-vector在多人语音集下表现出的识别能力更为优异。

Continuous and Discrete Similarity Coefficient for Identifying Essential Proteins Using Gene Expression Data

Essential proteins play a vital role in biological processes,and the combination of gene expression profiles with Protein-Protein Interaction(PPI)networks can improve the identification of essential proteins.However,gene expression data are prone to significant fluctuations due to noise interference in topological networks.In this work,we discretized gene expression data and used the discrete similarities of the gene expression spectrum to eliminate noise fluctuation.We then proposed the Pearson Jaccard coefficient(PJC)that consisted of continuous and discrete similarities in the gene expression data.Using the graph theory as the basis,we fused the newly proposed similarity coefficient with the existing network topology prediction algorithm at each protein node to recognize essential proteins.This strategy exhibited a high recognition rate and good specificity.We validated the new similarity coefficient PJC on PPI datasets of Krogan,Gavin,and DIP of yeast species and evaluated the results by receiver operating characteristic analysis,jackknife analysis,top analysis,and accuracy analysis.Compared with that of node-based network topology centrality and fusion biological information centrality methods,the new similarity coefficient PJC showed a significantly improved prediction performance for essential proteins in DC,IC,Eigenvector centrality,subgraph centrality,betweenness centrality,closeness centrality,NC,PeC,and WDC.We also compared the PJC coefficient with other methods using the NF-PIN algorithm,which predicts proteins by constructing active PPI networks through dynamic gene expression.The experimental results proved that our newly proposed similarity coefficient PJC has superior advantages in predicting essential proteins.

ADAPTIVE RECONSTRUCTION TECHNIQUE FOR THE LOST INFORMATION OF THE RECTANGULAR IMAGE AREA

The adaptive reconstruction for the lost information of the rectangular image area is very important for the robust transmission and restoration of the image. In this paper, a new reconstruction method based on the Discrete Cosine Transform (DCT) domain has been put forward. According to the low pass character of the human visual system and the energy distribution of the DCT coefficients on the rectangular boundary, the DCT coefficients of the rectangular image area are adaptively selected and recovered. After the Inverse Discrete Cosine Transform (IDCT), the lost information of the rectangular image area can be reconstructed. The experiments have demonstrated that the subjective and objective qualities of the reconstructed images are enhanced greatly than before.

Investigation into improving the efficiency and accuracy of CFD/DEM simulations

The Euler-Lagrange approach combined with a discrete element method has frequently been applied to elucidate the hydrodynamic behavior of dense fluid-solid flows in fluidized beds. In this work, the efficiency and accuracy of this model are investigated. Parameter studies are performed; in these studies, the stiffness coefficient, the fluid time step and the processor number are varied under conditions with different numbers of particles and different particle diameters. The obtained results are compared with measurements to derive the optimum parameters for CFD/DEM simulations. The results suggest that the application of higher stiffness coefficients slightly improves the simulation accuracy. However, the average computing time increases exponentially. At larger fluid time steps, the results show that the average computation time is independent of the applied fluid time step whereas the simulation accuracy decreases greatly with increasing the fluid time step. The use of smaller time steps leads to negligible improvements in the simulation accuracy but results in an exponential rise in the average computing time. The parallelization accelerates the DEM simulations if the critical number for the domain decomposition is not reached. Above this number, the performance is no longer proportional to the number of processors. The critical number for the domain decomposition depends on the number of particles. An increase in solid contents results in a shift of the critical decomposition number to higher numbers of CPUs.

Circulation intensity and axial dispersion of non-cohesive solid particles in a V-blender via DEM simulation

In this study, discrete element method （DEM） was employed to simulate the movement of non-cohesive mono-dispersed particles in a V-blender along with particle-particle and particle-boundary interactions. To validate the model, DEM results were successfully compared to positron emission particle tracking （PEPT） data reported in literature. The validated model was then utilized to explore the effects of rotational speed and fill level on circulation intensity and axial dispersion coefficient of non-cohesive particles in the V-blender. The results showed that the circulation intensity increased with an increase in the rotational speed from 15 to 60 rpm. As the fill level increased from 20% to 46%, the circulation intensity decreased, reached its minimum value at a fill level of 34% for all rotational speeds, and did not change significantly at fill levels greater than 34%. The DEM results also revealed that the axial dispersion coefficient of particles in the V-blender was a linear function of the rotational speed. These trends were in good agreement with the experimentallv determined values reported bv previous researchers.