A nonparametric spectrum estimation method for dispersion and attenuation analysis of borehole acoustic measurements

Dispersion and attenuation analysis can be used to determine formation anisotropy induced by fractures,or stresses.In this paper,we propose a nonparametric spectrum estimation method to get phase dispersion characteristics and attenuation coefficient.By designing an appropriate vector filter,phase velocity,attenuation coefficient and amplitude can be inverted from the waveform recorded by the receiver array.Performance analysis of this algorithm is compared with Extended Prony Method(EPM)and Forward and Backward Matrix Pencil(FBMP)method.Based on the analysis results,the proposed method is capable of achieving high resolution and precision as the parametric spectrum estimation methods.At the meantime,it also keeps high stability as the other nonparametric spectrum estimation methods.At last,applications to synthetic waveforms modeled using finite difference method and real data show its efficiency.The real data processing results show that the P-wave attenuation log is more sensitive to oil formation compared to S-wave;and the S-wave attenuation log is more sensitive to shale formation compared to P-wave.

Study on dynamics of shear waves-Ⅰ. Scale analysis and dispersion relation

- Starting from satellite remote sensing data, the dynamical processes of shear waves occurring at the boundary between the western boundary current and the shelf slope water are studied and dynamically analyzed in this study. The average wavelength is 75 km, and the average amplitude (from crest to trough )17 km. the average phase speed 100 cms-1 for the shear waves along the north wall of the Gulf Stream to the east of Cape Hatteras measured from NOAA satellite IR (infrared ) images. The average wavelength of shear waves along the north wall of the Kuroshio Current is 57 km, and the average amplitude 17 km. For the shear waves occurring along the west wall of the Gulf Stream to the south of Cape Hatteras, the average wavelength is 131 km, and the average amplitude 33 km measured from Seasat SAR (synthetic aperture radar )images. The time for one cycle of shear wave event is about one week.In order to explore the dynamical mechanisms of shear waves, we solved the vorticity equation for a stratified fluid, and obtained an analytical expression of dispersion relation of shear waves. The results indicated that there was a parabolic relation between the phase speed and the wavelength of shear waves, and the mean flow field was an important factor in the dispersion relation. The latter point means that the horizontal tangent variation of velocity is a basic condition for shear wave occurrence. Theoretical analyses are confirmed by satellite remote sensing data.

Analysis of high-frequency local coupling instability induced by multi- transmitting formula - P-SV wave simulation in a 2D waveguide

Local coupling instability will occur when the numerical scheme of absorbing boundary condition and that of the field wave equation allow energies to spontaneously enter into the computational domain. That is, the two schemes support common wave solutions with group velocity pointed into the computation domain. The key to eliminate local coupling instability is to avoid such wave solutions. For lumped-mass finite element simulation of P-SV wave motion in a 2D waveguide, an approach for stable implementation of high order multi-transmitting formula is provided. With a uniform rectangular mesh, it is proven and validated that high-freqaency local coupling instability can be eliminated by setting the ratio of the element size equal to or greater than x/2 times the ratio of the P wave velocity to the S wave velocity. These results can be valuable for dealing instability problems induced by other absorbing boundary conditions.

Launching and Travelling Dynamic Analysis of Rocket Launcher System ──The Study of a Unified Model

A unified model which is used to study the launching and travelling dynamic properties of a rlcket/launcher system is established. In this model, the rocket, the launcher,and the launching vehicle are considered as an interacting dynamic system in order to study the dynamic interaction between the various parts of the system and the optimal parameter matching among the above mentioned parts. The following random factors are taken into account in this paper. road surface excitation. rocket mass center misalignment, thrust misalignment, dynamic of the rocket, and the cross wind. Based on this unified model, a computer simulation software is developed, some simulation work has been carried out, and certain beneficial results have been achieved.

Frost Resistance of Pervious Concrete Mixed with Waste Glass Powder

The contents of waste glass powder(WGP)(0%,10%,15%,20%,25%)and water-binder ratio(W/C)(0.24,0.26,0.28)were used as influencing factors,and the quality loss rate(Δm)and compressive strength loss rate(Δfc)were used as characterization parameters.The Ca/Si ratio and main element contents of C-S-H gels with different WGP content were investigated by energy dispersive spectrometry(EDS).The pore structure evolution characteristics of WGP composite cementing materials were investigated by low field nuclear magnetic resonance(NMR).UsingΔfc as the index of frost resistance degradation and Weibull function,the frost resistance degradation of glass doped pervious concrete(WGP-PC)was modeled.The results show that,with WGP,for the same number of cycles,Δm andΔfc decrease and increase with the increase of WGP.Under the same WGP content,Δm andΔfc decrease first and then increase with the increase of W/C.After 100 freeze-thaw cycles,the samples with WGP content of 20%and W/C of 0.26 have the best freeze-resistance.Microscopic tests show that with the increase of WGP content,the Ca/Si ratio of C-S-H gel decreases at first and then increases with the increase of WGP content.The extreme value of Ca/Si is 2.36 when WGP is added by 20%.The pore volume of hardened paste with 20%WGP content decreased by 18.6%compared with that of cement system without WGP.The overall compactness of the specimen was improved.On the basis of the test data,a life prediction model was established according to Weibull function.The experiment showed thatΔfc could be used as a durability degradation index,and the slope of the reliability curve became gentle after WGP was added,which reduced the damage degradation rate of PC.W/C was 0.26.It's about 5000 hours.

Numerical study of dispersion characteristics of dipole flexural waves in a cased hole with different cement conditions

Crossed-dipole acoustic logging technology is mainly used to measure shear wave and determine the anisotropy or fractures of formation in the fi eld of acoustic logging.Based on the propagation characteristics of dipole flexural waves in cased holes,and the wavefi eld of fundamental flexural mode at three bonding conditions:good cement bonding,poorly bonded interface I,and poorly bonded interface II.The dispersion curves of flexural waves are calculated,and the eff ects of cement parameters(elastic parameters and geometric dimensions)on dispersion curves are investigated.The RAI method is used to calculate the dipole full waveforms in a cased hole with conventional or ultralight cement surrounded by a soft formation.Then,the weighted spectral semblance is used to conduct the dispersion analysis of the full waves.The numerical results show that the cutoff frequency of flexural waves exceeds the frequency band of the current dipole logging tools in the well-bonded cased hole with conventional cement in soft formations.However,when ultralight cement is used,the cutoff frequency shifts toward low values,and the ultralight cement bonding is conducive to measuring flexural waves in soft formations.When interface I is poorly bonded,the cutoff frequency shifts toward low values,and the change is evident in soft formations.The cutoff frequency in the case of ultralight cement bonding is more evident than that of conventional cement bonding.If only interface II is poorly bonded,regardless of the cement used,the cutoff frequencies are all below 2 kHz.The dipole full-wave analysis of diff erent bonding conditions further illustrates that the dispersion characteristics of flexural waves are sensitive to the cement bonding quality of cased holes.

Static and Dynamic Indicators in the Analysis of Internal Sources of Companies＇ Investments Financing

The Republic of Serbia is characterized by an unsatisfactory macroeconomic environment. Under the conditions of an evident shortage of liquid assets, the financial capital has moved from real to the financial sector, which led companies to over-indebtedness and shutdown of their own capacities. Therefore, capital investments largely depend on internal financing sources and the ability of companies to internally generate funds for investments. In this regard, an emphasis is placed on the difference in the assessment of the company＇s investment capacity based on internal financing sources, which are measured using static and dynamic indicators in order to prove the necessity of applying dynamic coefficients, which are unfortunately not present in our domestic practice. The paper examines and proves the advantages of the use of the dynamic approach for such analyses using the example of energy sector, which is one of the most important branches in Serbian economy.

Symplectic analysis for elastic wave propagation in two-dimensional cellular structures

On the basis of the finite element analysis, the elastic wave propagation in cellular structures is investigated using the symplectic algorithm. The variation principle is first applied to obtain the dual variables and the wave propagation problem is then transformed into two-dimensional （2D） symplectic eigenvalue problems, where the extended Wittrick-Williams algorithm is used to ensure that no phase propagation eigenvalues are missed during computation. Three typical cellular structures, square, triangle and hexagon, are introduced to illustrate the unique feature of the symplectic algorithm in higher-frequency calculation, which is due to the conserved properties of the structure-preserving symplectic algorithm. On the basis of the dispersion relations and phase constant surface analysis, the band structure is shown to be insensitive to the material type at lower frequencies, however, much more related at higher frequencies. This paper also demonstrates how the boundary conditions adopted in the finite element modeling process and the structures＇ configurations affect the band structures. The hexagonal cells are demonstrated to be more efficient for sound insulation at higher frequencies, while the triangular cells are preferred at lower frequencies. No complete band gaps are observed for the square cells with fixed-end boundary conditions. The analysis of phase constant surfaces guides the design of 2D cellular structures where waves at certain frequencies do not propagate in specified directions. The findings from the present study will provide invaluable guidelines for the future application of cellular structures in sound insulation.

Alpha-actinin expression at different differentiating time points from temporal lobe cerebral cortex neural stem cells to neuron-like cells using energy dispersive X-ray analysis

BACKGROUND： Alpha-actinin （ a -actinin） plays a key role in neuronal growth cone migration during directional differentiation from neural stem cells （NSCs） to neurons. OBJECTIVE： To detect in situ microdistribution and quantitative expression of a -actinin during directional differentiation of NSCs to neurons in the temporal lobe cerebral cortex of neonatal rats. DESIGN, TIME AND SETTING： Between January 2006 and December 2008, culture and directional differentiation of NSCs were performed at Department of Histology and Embryology, Preclinical Medical College, China Medical University. Immune electron microscopy was performed at Department of Histology and Embryology and Department of Electron Micrology, Preclinical Medical College, China Medical University. Spectrum analysis was performed at Laboratory of Electron Microscopy, Mental Research Institute, Chinese Academy of Sciences. MATERIALS： Basic fibroblast growth factor, epidermal growth factor, brain-derived nerve growth factor, type-1 insulin like growth factor, and a -actinin antibody were provided by Gibco BRL, USA; rabbit-anti-rat nestin monoclonal antibody, rabbit-anti-rat neuron specific enolase polyclonal antibody, and EDAX-9100 energy dispersive X-ray analysis were provided by PHILIPS Company, Netherlands. METHODS： NSCs, following primary and passage culture, were differentiated with serum culture medium （DMEM/F12 ＋ 10% fetal bovine serum ＋ 2 ng/mL brain-derived nerve growth factor ＋ 2 ng/mL type-1 insulin like growth factor）. MAIN OUTCOME MEASURES： Expression of a -actinin in neuron-like cells was quantitatively and qualitatively detected with immunocytochemistry using energy dispersive X-ray analysis. RESULTS： Immunocytochemistry, combined with electron microscopy, indicated that positive α -actinin expression was like a spheroid particle with high electron density. In addition, the expression was gradually concentrated from the nuclear edge to the cytoplasm and expanded into developing neurites, during differentiation of neural stem cells to neurons. Conversely, energy dispersive X-ray analysis indicated that the more mature the neural differentiation was, and the greater the expression of α -actinin. CONCLUSION： The gradual increase of α -actinin expression is related to growth, development, and maturity of differentiated neuron-like cells, in neonatal rat frontal lobe cortex, at different differentiating time points of NSCs to neurons.

Elemental Analysis of Soil Phosphorus Neighborhoods Using SEM, Spectral Mapping and GIS

The utility of GIS （geographic information system） methods and spatial statistical analysis on spectral maps of sediment samples were examined. Detailed elemental maps are often constructed using energy dispersive X-ray techniques and SEM （scanning electron microscopy）. The elemental neighborhood associations of a single element, P （phosphorus）, were quantified at a magnification of 3,000 ×. For each of the 170,000 pixels on the images which displayed a strong P concentration, neighborhoods from 0.1μm^2 to 12 μm^2 were examined for associated elemental concentrations. PCA （principal component analysis） revealed two significant neighborhood types associated with P in samples of pH 4, and three neighborhood types at pH 8. These neighborhoods corresponded to Mg-P associations commonly found to be chemically prevalent in river sediments impacted by agricultural operations. Discriminant analysis showed that the greatest accuracy in predicting sample pH could be achieved by using a neighborhood size of 12 ~m2. Potassium at relatively large neighborhood sizes was the element most significant in predicting pH. While many of the chemical associations in close proximity to P could be predicted and explained through mineral solubility, spatial analysis provided some interesting insights into the structure of the samples. Results also indicted differences in the spatial scale associated with different processes.

Effect of Cu on Microstructures of Manganese Steel by EDXA and SEM

In order to investigate the distribution of Cu and Mg, and the effect of Cu on the microstructure of steels, manganese steels containing various Cu contents were annealed at 1260, 1100 and 1000℃, respectively, for I h and subsequently cooled to room temperature in the furnace to simulate the pre-rolling anneal. The results indicate that Cu is not microscopically segregated in the annealed steels. The scanning electron microscopy （SEM） observation shows that the main microstructure consist of ferrite and pearlite; the percentage of pearlite in the steels increases with increasing Cu content. The grain size reduces with the decrease of the annealing temperature. The results of energy dispersive X-ray analysis （EDXA） suggest that Cu content in pearlite is higher than that in ferrite, demonstrating that the microstructure-segregation of Cu occurred. However, the cast specimens show that Cu content in MnS and S-rich phases is high. In addition, Cu of 0.2%-0.4% could improve the distribution of MnS and S-rich inclusions. The optimal Cu content in steels and the optimal annealing temperature between 1100-1200℃ were determined.

PREPARATION AND SURFACE PROPERTIES OF ACRYLIC COPOLYMERS CONTAINING FLUORINATED MONOMERS

A series of copolymers comprising butylmethacrylate, styrene, butylacrylate, hydroxypropyl acrylate and perfluoroalkyl methacrylate were synthesized by the free radical polymerization using BPO as an initiator. The surface property of the copolymer films was subsequently characterized. The contact angle measurements and energy dispersive analysis of X-ray （EDAX） show that the length and content of perfluoroalkyl side chains in the copolymers are crucial for the preparation of the film with low surface energy. At a given content of fluorinated monomers in the copolymers, the longer the perfluoroalkyl side chain, the larger the water contact angle of the copolymer films will be. On the other hand, the higher the content of fluorinated monomers, the lower the surface energy is. The water contact angle increases with the increase of the fluorinated monomer content and reaches a plateau at 3 wt% of fluorinated monomer content.

Comparison of 66 chemical element contents in normal and benign hyperplastic prostate

Objective:The aim of this study was to clarify the differences between the prostatic levels of chemical elements in patients with benign prostatic hyperplasia(BPH)and healthy male.Methods:We evaluated the prostatic level of 66 chemical elements in 43 patients with BPH and 37 healthy males.Measurements were performed using five instrumental analytical methods.Results:In the hyperplastic prostates,we have observed a significant increase in the mean level of Bi,Cr,Hg,K,Sb,and Se accompanied a significant decrease in the mean level of Al,Ce,Cs,Dy,Er,Gd,Ho,La,Mo,Nd,Pb,Pr,Sm,Sn,Tb,Tm,U,and Y.No differences were found in the mean prostatic level of other chemical elements including Ag,Al,Au,B,Ba,Be,Br,Ca,Cd,Co,Cu,Fe,Li,Mg,Mn,Na,Nb,Ni,P,Rb,S,Sc,Si,Th,Ti,Tl,Yb,Zn,and Zr between BPH patients and healthy males.Conclusions:The finding of chemical element contents and correlation between pairs of chemical element mass fractions indicates that there is a great disturbance of prostatic chemical element metabolism in BPH gland.Trace elements Bi,Cr,Hg,K,Sb,and Se may be regarded as the possible tissue biomarkers of hyperplastic transformation of prostate gland.Obtained data did not confirm a critical role of Cd and Pb accumulation in the pathogenesis of BPH.A potential age-related Zn,Fe,and Se deficiency in the prostate tissue has not been found as being involved in the etiology of BPH.

DISTRIBUTION OF Cu AND ITS EFFECT ON MICROSTRUCTURE OF Cu-BEARING STEEL

In order to investigate the distribution of Cu and its effect on the microstructure of Cu-bearing steel, a series of mild steels containing different contents of Cu are developed by vacuum electric arc furnace. These steels are annealed at 1 260℃, 1 100 ℃ and 1 000℃ respectively for one hour and followed by furnace cooling to room temperature to simulate the heat treatment before the rolling process. The results show that Cu did not obviously segregate in annealed steels. The scanning electron microscope （SEM） observation show that the main microstruetures in Cu-bearing steel are ferrite and pearlite; The volume fraction of pearlite in steel increase with increasing Cu content. The grain size reduces with the decrease of annealing temperature. The results of energy dispersive X-ray analysis （EDXA） suggest that the Cu content in pearlite is higher than that in ferrite, which means that the microstructure-segregatian of Cu exists. However, the cast specimens show that Cu content in MnS and S-rich phase is very high, and Cu changed the distribution of/vinS in steel. In addition, the optimal Cu content in steel between 0.2%-0.4% and the optimal annealing temperature between 1 100-1 200℃are determined by the economical and practical principles.

Effect of Element Distortion on the Numerical Dispersion of Spectral Element Methods

Spectral element methods are well established in the field of wave propagation,in particular because they inherit the flexibility of finite element methods and have low numerical dispersion error.The latter is experimentally acknowledged,but has been theoretically shown only in limited cases,such as Cartesian meshes.It is well known that a finite element mesh can contain distorted elements that generate numerical errors for very large distortions.In the present work,we study the effect of element distortion on the numerical dispersion error and determine the distortion range in which an accurate solution is obtained for a given error tolerance.We also discuss a double-grid calculation of the spectral element matrices that preserves accuracy in deformed geometries.

THE CAUCHY PROBLEM OF THE HARTREE EQUATION

In this paper, we systematically study the wellposedness, illposedness of the Hartree equation, and obtain the sharp local wellposedness, the global existence in Hs, s≥1 and the small scattering result in Hs for 2 〈γ〈 n and s ≥ 2/γ - 1. In addition, we study the nonexistence of nontrivial asymptotically free solutions of the Hartree equation.