Improved calibration method for displacement transformation coefficient in optical and visual measurements

Optical and visual measurement technology is used widely in fields that involve geometric measurements,and among such technology are laser and vision-based displacement measuring modules(LVDMMs).The displacement transformation coefficient(DTC)of an LVDMM changes with the coordinates in the camera image coordinate system during the displacement measuring process,and these changes affect the displacement measurement accuracy of LVDMMs in the full field of view(FFOV).To give LVDMMs higher accuracy in the FFOV and make them adaptable to widely varying measurement demands,a new calibration method is proposed to improve the displacement measurement accuracy of LVDMMs in the FFOV.First,an image coordinate system,a pixel measurement coordinate system,and a displacement measurement coordinate system are established on the laser receiving screen of the LVDMM.In addition,marker spots in the FFOV are selected,and the DTCs at the marker spots are obtained from calibration experiments.Also,a fitting method based on locally weighted scatterplot smoothing(LOWESS)is selected,and with this fitting method the distribution functions of the DTCs in the FFOV are obtained based on the DTCs at the marker spots.Finally,the calibrated distribution functions of the DTCs are applied to the LVDMM,and experiments conducted to verify the displacement measurement accuracies are reported.The results show that the FFOV measurement accuracies for horizontal and vertical displacements are better than±15μm and±19μm,respectively,and that for oblique displacement is better than±24μm.Compared with the traditional calibration method,the displacement measurement error in the FFOV is now 90%smaller.This research on an improved calibration method has certain significance for improving the measurement accuracy of LVDMMs in the FFOV,and it provides a new method and idea for other vision-based fields in which camera parameters must be calibrated.

Evaluation of the Iranian guideline for deismic rehabilitation of existing buildings

The Iranian Guideline for Seismic Rehabilitation of Existing Buildings （GSREB）, which is currently used for vulnerability assessment of existing buildings in Iran, is evaluated in this paper. The vulnerability of sample buildings of a variety stories with special steel moment resisting frames, designed according to the Standard No.2800 requirements, is assessed by GSREB. In the vulnerability assessment, different analysis methods were used and the results, in terms of usage ratio, defined as the ratio of the strength/deformation demand to the corresponding capacity, are compared. Numerical results show that some columns of these buildings do not satisfy the life safety performance criteria in the design hazard level. Moreover, the target displacement estimated by the Displacement Coefficient Method （DCM） is larger than the maximum displacement calculated by nonlinear dynamic analysis.