Recent progress in microbial cell surface display systems and their application on biosensors

Microbial cell surface display technology is a recombinant technology to express target proteins on the cell membrane,which can be used to redesign the cell surface with functional proteins and peptides.Bacterial and yeast surface display systems are the most common cell surface display systems of prokaryotic and eukaryotic proteins,that are widely applied as the core elements in the field of biosensors due to their advantages,including enhanced stability,high yield,good safety,expression of larger and more complex proteins.To further promote the performance of biosensors,the biomineralized microbial surface display technology was proposed.This review summarized the different microbial surface display systems and the biomineralized surface display systems,where the mechanisms of surface display and biomineralization were introduced.Then we described the recent progress of their applications on biosensors for different types of detection targets.Finally,the outlooks and tendencies were discussed and forecasted with the expectation to provide some general functions and enlightenments to this aspect of research.

NOVEL VOLUMETRIC THREE-DIMENSIONAL DISPLAY SYSTEM

A novel volumetric three-dimensional（3-D） display system is developed based on the human eye persistence and the system fuses a time-series of image slices into a single hologram like 3-D aerial image. The system design is introduced and key components are described. Experimental results show that the 3-D system can guide people freely walk around the display to inspect the true 3-D image without goggles.

VOLUMETRIC-SWEPT DISPLAY SYSTEM BASED ON HELIX ROTATING SCREEN AND DMD

Based on the helix rotating screen and the digital micro-mirror device （DMD）, the former proto of volumetric-swept display system is improved. The 3-D display system adopting a helix rotating screen to construct an imaging space meliorate the defects, such as the smaller image space, the fewer voxels and the severer voxel overlap dead zone caused by planar rotating screen. DMD with spatial light modular （SLM） technology increases the transmission bandwidth of 3-D data in the voxel activation subsystem and activate multi-voxel once time. The volumetric-swept system based on helix rotating screen and DMD is developed. The experimental results show that the image space, the vision dead zone, the voxels on slice, and the voxel activation capacity of the designed proto are superior to the plane rotating screen system.

Development of an Instant Correction and Display System of Numerical Weather Prediction Products in China

This paper presents the development of numerical prediction products(NPP) correction and display system(NPPCDS) for rapid and effective post-processing and displaying of the T213 NPP(numerical prediction products of the medium range numerical weather prediction spectral model T213L31) through instant correction method. The NPPCDS consists of two modules: an automatic correction module and a graphical display module. The automatic correction module automatically corrects the T213 NPP at regularly scheduled time intervals, while the graphical display module interacts with users to display the T213 NPP and its correction results. The system helps forecasters extract the most relevant information at a quick glance without extensive post-processing. It is simple, easy to use, and computationally efficient, and has been running stably at Huludao Meteorological Bureau in Liaoning Province of China for the past three years. Because of its low computational costs, it is particularly useful for meteorological departments that lack advanced computing capacity and still need to make short-range weather forecasting.

Model Implementation and Analysis of a True Three-dimensional Display System

To model a true three-dimensional(3D)display system,we introduced the method of voxel molding to obtain the stereoscopic imaging space of the system.For the distribution of each voxel,we proposed a four-dimensional(4D)Givone–Roessor(GR)model for state-space representation—that is,we established a local state-space model with the 3D position and one-dimensional time coordi-nates to describe the system.First,we extended the original elementary operation approach to a 4D condition and proposed the implementation steps of the realiza-tion matrix of the 4D GR model.Then,we described the working process of a true 3D display system,analyzed its real-time performance,introduced the fixed-point quantization model to simplify the system matrix,and derived the conditions for the global asymptotic stability of the system after quantization.Finally,we provided an example to prove the true 3D display system’s feasibility by simulation.The GR-model-representation method and its implementation steps proposed in this paper simplified the system’s mathematical expression and facilitated the microcon-troller software implementation.Real-time and stability analyses can be used widely to analyze and design true 3D display systems.

Construction of a Multipurpose M13KE Phage Display System

In this study, a multipurpose M13KE phage display vector was constructed from wild-type M13KE phage for long peptide or protein display libraries without helper phage to expand the scope of targeted high-throughput screening. Based on the relationship between the structure and function of minor coat protein of wild-type MI3KE （wt-plII）, a truncated gene III （tglll） encoding minor coat protein from M13KE phage was cloned. A fusion gene fragment harboring a hw/tac promoter, signal peptide and C-terminal region sequence of gill was assembled with SOEing-PCR （splice-overlapping-extension polymerase chain reaction） method and inserted into M13KE vector. SDS-PAGE and Western blot analysis with anti-M13 pIII moneclonal antibody were employed to detect the expression of re- combinant protein, c-Myc and HA tag sequences were fused into the recombinant protein. The results showed that tglll was inserted into an unessential region of M13KE. According to the results of SDS-PAGE and Western blot with anti-M13 pIII antibody, pIII was expressed by wt-gIII and tgIII, glII harboring two tags ex- pressed both c-Myc and HA peptides using SDS-PAGE and Western blot with the corresponding monoclonal antibodies. In this study, a multipurpose M13KE phage display system was successfully constructed, which could express both short and long peptide libraries without helper phage. In future, the obtained M13KE phage display system may be used for targeted high-throughput screening of long peptide libraries without helper phage.

Phage Display Technology, Phage Display System, Antibody Library, Prospects and Challenges

Phage display technology is a unique gene recombination expression technology, and it is also a simple and effective screening tool. Through panning, a protein or peptide with high affinity and selectivity to the target is obtained. Antibody phage display has become the first and most widely used in vitro screening technology. Phage display derivatives play an important role in the diagnosis and treatment of diseases. This article reviews the phage display system of phage display technology, the size and classification of antibody libraries and their applications, and discusses the application prospects and challenges of phage display technology. This thesis lays the foundation for the theoretical and experimental research of bacteriophages.

Low-Cost Tiled Display System Architecture with Dynamic Web-Based Management

In this paper, a scalable hardware and software architecture for tiled display systems (a.k.a. videowalls), which can be implemented by using low-cost devices, together with a dynamic web-based management and configuration service are proposed. It has been designed to support both stored and live broadcast/broadband content, in mosaic or warp distributions. The displays and devices can be dynamically configured via web in different ways: the displays can create a single display of a larger size;or they can be configured in a customized way in order to playout different media contents in different display combinations. As display renderers, low-cost devices are proposed as the main hardware element to obtain affordable videowall systems. As a proof of concept, two prototypes have been implemented, including an accurate synchronization mechanism based on a Master/Slave control scheme and aggressive and smooth playout adjustment techniques. To evidence the good performance of the prototypes and configuration service, both objective and subjective evaluations have been conducted regarding synchronization accuracy and usability. On the one hand, the mean values of the asynchronies between the video playout processes in each display are kept below 25ms (i.e., frame accuracy). On the other hand, the obtained usability score in the System Usability Scale (SUS) test has been 88.65, which is considered as excellent.

3D Display System Based On Digital Holography Application In Making Cartoon Holography

Holography is an interesting tool in creating real objects and scenes which can be projected anywhere with accurate details and depth impression. It is also found to be more attractive to the artists than other alternatives. For that reason, digital holography is being used as a display technology in cartoon movies. Since this application is dependent on the performance and the simplicity of the available display technology, it becomes very useful to improve the display technique in order to become fast, simple, and attractive by being combined with computer graphical effects. This paper discusses a simulation of a digital holographic model as a three dimensional (3D) display system and its application in making cartoon holography.

Swept-Volume Display System Based on Cylindrical Space Projection and Curved Reflectors

In order to achieve a clear and steady swept-volume display,the method of swept-volume display based on cylindrical space projection was presented. One projector generated the image volume in π× 70 mm × 70 mm × 150 mm space. Experimentally,the resolution of images was 800 pixel × 600 pixel × 360 pixel,which resulted in almost 345 million voxels. In order to achieve space voxels with uniform brightness, curved reflectors were also designed. In addition,the match conditions between triangles and the scanning planes in the volume space were classified and a sweptvolume graphics engine based on embedded platform was designed.The image rendering the hardware foundation for three-dimensional( 3D) dynamic images generation was achieved. Demonstrated in the experiments,light source utilization of the second-generation system based on curved mirror is about three times brighter than the firstgeneration 3D minitor based on flat mirror,and this system is able to display color,clear and well-proportioned 3D images in brighter room light.

Airport Management—Value of Customer Display Systems

By providing real-time updates of essential information, airports not only display and disseminate information but also help control the flow of traffic. In order to maximize available space, particularly in high traffic areas, Airport Display Information Systems should be integrated into the overall design of the airport and their positioning should be carefully planned to deliver optimal results. Airport Display Information Systems can help airports maximize space, increase customer satisfaction, and generate new revenue opportunities. The technology is designed not only to comply with environmental regulations, but also to help airports keep budgets in check. This paper discusses airport display systems, their connections and interoperability with other systems and who the key airport users of these airport display systems are.

Large viewing angle holographic 3D display system based on maximum diffraction modulation

An ideal holographic 3D display should have the characteristics of large viewing angle,full color,and low speckle noise.However,the viewing angle of the holographic 3D display is usually limited by existing strategies,which vastly hinders its extensive application.In this paper,a large viewing angle holographic 3D display system based on maximum diffraction modulation is proposed.The core of the proposed system comprises the spatial light modulators(SLMs)and liquid crystal grating.We also present a new feasible scheme for the realization of large viewing angle holographic 3D display.This is achieved by considering the maximum diffraction angle of SLM as the limited diffraction modulation range of each image point.By doing so,we could not only give access to the maximum hologram size of the object,but also tune the reconstructed image of secondary diffraction by using a self-engineered liquid crystal grating.More importantly,the proposed maximum diffraction modulation scheme enables the viewing angle of the proposed system to be enlarged to 73.4°.The proposed system has huge application potential in the fields such as education,culture,and entertainment.

Non-volatile dynamically switchable color display via chalcogenide stepwise cavity resonators

High-resolution multi-color printing relies upon pixelated optical nanostructures,which is crucial to promote color display by producing nonbleaching colors,yet requires simplicity in fabrication and dynamic switching.Antimony trisulfide(Sb_(2)S_(3))is a newly rising chalcogenide material that possesses prompt and significant transition of its optical characteristics in the visible region between amorphous and crystalline phases,which holds the key to color-varying devices.Herein,we proposed a dynamically switchable color printing method using Sb_(2)S_(3)-based stepwise pixelated Fabry-Pérot(FP)cavities with various cavity lengths.The device was fabricated by employing a direct laser patterning that is a less timeconsuming,more approachable,and low-cost technique.As switching the state of Sb_(2)S_(3) between amorphous and crystalline,the multi-color of stepwise pixelated FP cavities can be actively changed.The color variation is due to the profound change in the refractive index of Sb_(2)S_(3) over the visible spectrum during its phase transition.Moreover,we directly fabricated sub-50 nm nano-grating on ultrathin Sb_(2)S_(3) laminate via microsphere 800-nm femtosecond laser irradiation in far field.The minimum feature size can be further decreased down to~45 nm(λ/17)by varying the thickness of Sb_(2)S_(3) film.Ultrafast switchable Sb_(2)S_(3) photonic devices can take one step toward the next generation of inkless erasable papers or displays and enable information encryption,camouflaging surfaces,anticounterfeiting,etc.Importantly,our work explores the prospects of rapid and rewritable fabrication of periodic structures with nano-scale resolution and can serve as a guideline for further development of chalcogenide-based photonics components.

Atomic layer deposition in advanced display technologies:from photoluminescence to encapsulation

Driven by the growing demand for next-generation displays,the development of advanced luminescent materials with exceptional photoelectric properties is rapidly accelerating,with such materials including quantum dots and phosphors,etc.Nevertheless,the primary challenge preventing the practical application of these luminescent materials lies in meeting the required durability standards.Atomic layer deposition(ALD)has,therefore,been employed to stabilize luminescent materials,and as a result,flexible display devices have been fabricated through material modification,surface and interface engineering,encapsulation,cross-scale manufacturing,and simulations.In addition,the appropriate equipment has been developed for both spatial ALD and fluidized ALD to satisfy the low-cost,high-efficiency,and high-reliability manufacturing requirements.This strategic approach establishes the groundwork for the development of ultra-stable luminescent materials,highly efficient light-emitting diodes(LEDs),and thin-film packaging.Ultimately,this significantly enhances their potential applicability in LED illumination and backlighted displays,marking a notable advancement in the display industry.

Flexible perovskite light-emitting diodes for display applications and beyond

The flexible perovskite light-emitting diodes(FPeLEDs),which can be expediently integrated to portable and wearable devices,have shown great potential in various applications.The FPeLEDs inherit the unique optical properties of metal halide perovskites,such as tunable bandgap,narrow emission linewidth,high photoluminescence quantum yield,and particularly,the soft nature of lattice.At present,substantial efforts have been made for FPeLEDs with encouraging external quantum efficiency(EQE)of 24.5%.Herein,we summarize the recent progress in FPeLEDs,focusing on the strategy developed for perovskite emission layers and flexible electrodes to facilitate the optoelectrical and mechanical performance.In addition,we present relevant applications of FPeLEDs in displays and beyond.Finally,perspective toward the future development and applications of flexible PeLEDs are also discussed.

Dynamic interactive bitwise meta-holography with ultra-high computational and display frame rates

Interactive holography offers unmatched levels of immersion and user engagement in the field of future display.Despite of the substantial progress has been made in dynamic meta-holography,the realization of real-time,highly smooth interactive holography remains a significant challenge due to the computational and display frame rate limitations.In this study,we introduced a dynamic interactive bitwise meta-holography with ultra-high computational and display frame rates.To our knowledge,this is the first reported practical dynamic interactive metasurface holographic system.We spa-tially divided the metasurface device into multiple distinct channels,each projecting a reconstructed sub-pattern.The switching states of these channels were mapped to bitwise operations on a set of bit values,which avoids complex holo-gram computations,enabling an ultra-high computational frame rate.Our approach achieves a computational frame rate of 800 kHz and a display frame rate of 23 kHz on a low-power Raspberry Pi computational platform.According to this methodology,we demonstrated an interactive dynamic holographic Tetris game system that allows interactive gameplay,color display,and on-the-fly hologram creation.Our technology presents an inspiration for advanced dynamic meta-holography,which is promising for a broad range of applications including advanced human-computer interaction,real-time 3D visualization,and next-generation virtual and augmented reality systems.

A robot simulation system with virtual force display and feedback based on master manipulator

This paper describes a virtual environment, which can present dynamic force transformation during the control of objects. A 5-DOF haptic interface with the capability to generate kinesthetic effect is combined. In this system, the operator manipulates an object in a virtual environment by using the 5-DOF master arm. When contacting with the virtual object, the contact force can be calculated and shown in the graphic interface. The contact response and deformation of the virtual object, which are usually called haptic rendering, also can be performed. The study supplies an approach to improve the operator’s immersion and can be used in many tele-robot control fields.

LCD Projection Display System with High Brightness

A new compact XGA projection is designed with three 0.99" liquid crystal panels. By using 275W UHP lamp, above 3000 ANSI lumens could be achieved with the uniformity of 85%. The color temperature is 6742K.

360° light field 3D display system based on a triplet lenses array and holographic functional screen

A 360° light field 3D display system is presented, which consists of a liquid crystal display, a novel triplet lenses array, and a holographic functional screen （HFS）. The mapping relationship among pixels, 3D objects, and view- ing positions are investigated. The aberration analysis of the single lens is carried out both in the simulation and the experiment, which shows that it cannot provide an excellent 3D image to the viewers. In order to suppress the aberrations, ＂the primary aberration theory＂ and ＂the damped least-squares method＂ are used for optical analysis and lens design. A 3D image with aberration correction can be viewed around the proposed display system.

PHOTO-ELECTRIO MEASURING SYSTEM FOR TOOL EDGE DETECTION BY THE TEOHNOLOGY OF COMPUTER DYNAMIO DISPLAY MOVING IMAGE

This paper describes a technology of dynamic display moving image by computer monitor,which is initially used in the design of tool detection system. The paper presents the hardware and software principie and edge detection process. The way of marking edge point coordinates and stability of moving image also is analyzed. The method reforms the conventional design of the 2-D vision detection system. Moreover,it facilitates the design of the systematic mechanical construction,is convenient to compile instrument systemsoftware,and realizes to detect and track display image simultaneously. By the work,the tool detection system is improved to practical application.