Analyzing the Combination Effects of Repetitive Transcranial Magnetic Stimulation and Motor Control Training on Balance Function and Gait in Patients with Stroke-Induced Hemiplegia

Objective:To analyze the effects of repetitive transcranial magnetic stimulation combined with motor control training on the treatment of stroke-induced hemiplegia,specifically focusing on the impact on patients’balance function and gait.Methods:Fifty-two cases of hemiplegic stroke patients were randomly divided into two groups,26 in the control group and 26 in the observation group,using computer-generated random grouping.All participants underwent conventional treatment and rehabilitation training.In addition to these,the control group received repetitive transcranial magnetic pseudo-stimulation therapy+motor control training,while the observation group received repetitive transcranial magnetic stimulation therapy+motor control training.The balance function and gait parameters of both groups were compared before and after the interventions and assessed the satisfaction of the interventions in both groups.Results:Before the invention,there were no significant differences in balance function scores and each gait parameter between the two groups(P>0.05).However,after the intervention,the observation group showed higher balance function scores compared to the control group(P<0.05).The observation group also exhibited higher step speed and step frequency,longer step length,and a higher overall satisfaction level with the intervention compared to the control group(P<0.05).Conclusion:The combination of repetitive transcranial magnetic stimulation and motor control training in the treatment of stroke-induced hemiplegia has demonstrated positive effects.It not only improves the patient’s balance function and gait but also contributes to overall physical rehabilitation.

A Fractional Order Fast Repetitive Control Paradigm of Vienna Rectifier for Power Quality Improvement

Due to attractive features,including high efficiency,low device stress,and ability to boost voltage,a Vienna rectifier is commonly employed as a battery charger in an electric vehicle(EV).However,the 6k±1 harmonics in the acside current of the Vienna rectifier deteriorate theTHDof the ac current,thus lowering the power factor.Therefore,the current closed-loop for suppressing 6k±1 harmonics is essential tomeet the desired total harmonic distortion(THD).Fast repetitive control(FRC)is generally adopted;however,the deviation of power grid frequency causes delay link in the six frequency fast repetitive control to become non-integer and the tracking performance to deteriorate.This paper presents the detailed parameter design and calculation of fractional order fast repetitive controller(FOFRC)for the non-integer delay link.The finite polynomial approximates the non-integer delay link through the Lagrange interpolation method.By comparing the frequency characteristics of traditional repetitive control,the effectiveness of the FOFRC strategy is verified.Finally,simulation and experiment validate the steadystate performance and harmonics suppression ability of FOFRC.

Repetitive PD control strategy with inverse transfer function compensation for CVCF inverter

A novel repetitive control strategy for the output waveform of single-phase CVCF inverters is presented. In this scheme, the inverse transfer function of inverter is used as a compensator to obtain stable and satisfy harmonic rejection. Besides, PD controller is adopted to improve transient performance. Simulation and experimental results, which are gotten from a DSP-based 400Hz, 5.5KW inverter, indicate that the proposed control scheme can achieve not only low THD during steady-state operation but also fast transient response during load step change.

Effect of Combined Low-frequency Repetitive Transcranial Magnetic Stimulation and Virtual Reality Training on Upper Limb Function in Subacute Stroke:a Double-blind Randomized Controlled Trail

The effect of combined low-frequency repetitive transcranial magnetic stimulation（LF r TMS） and virtual reality（VR） training in patients after stroke was assessed. In a double-blind randomized controlled trial, 112 patients with hemiplegia after stroke were randomly divided into two groups： experimental and control. In experimental group, the patients received LF r TMS and VR training treatment, and those in control group received sham r TMS and VR training treatment. Participants in both groups received therapy of 6 days per week for 4 weeks. The primary endpoint including the upper limb motor function test of Fugl-meyer assessment（U-FMA） and wolf motor function test（WMFT）, and the secondary endpoint including modified Barthel index（MBI） and 36-item Short Form Health Survey Questionnaire（SF-36） were assessed before and 4 weeks after treatment. Totally, 108 subjects completed the study（55 in experimental group and 53 in control group respectively）. After 4-week treatment, the U-FMA scores [mean difference of 13.2, 95% confidence interval（CI） 3.6 to 22.7, P〈0.01], WMFT scores（mean difference of 2.9, 95% CI 2.7 to 12.3, P〈0.01）, and MBI scores（mean difference 16.1, 95% CI 3.8 to 9.4, P〈0.05） were significantly increased in the experimental group as compared with the control group. The results suggested the combined use of LF r TMS with VR training could effectively improve the upper limb function, the living activity, and the quality of life in patients with hemiplegia following subacute stroke, which may provide a better rehabilitation treatment for subacute stroke.

Design of Discrete-time Repetitive Control System Based on Two-dimensional Model

This paper presents a novel design method for discrete-time repetitive control systems （RCS） based on two-dimensional （2D） discrete-time model. Firstly, the 2D model of an RCS is established by considering both the control action and the learning action in RCS. Then, through constructing a 2D state feedback controller, the design problem of the RCS is converted to the design problem of a 2D system. Then, using 2D system theory and linear matrix inequality （LMI） method, stability criterion is derived for the system without and with uncertainties, respectively. Parameters of the system can be determined by solving the LMI of the stability criterion. Finally, numerical simulations validate the effectiveness of the proposed method.

Continuous rotary motor electro-hydraulic servo system based on the improved repetitive controller

In order to suppress the periodic interference of the continuous rotary electro-hydraulic servo motor,this paper makes the motor tracking the periodic signals with high accuracy,and improves the influence of friction interference to the performance of continuous rotary electro-hydraulic servo motor.The mathematic model of the electro-hydraulic position servo system of the continuous rotary motor was established,and the compound control method was adopted based on the repetitive control,feed forward and PID to suppress the friction interference.Through the simulation,the result confirms that the compound control method decreases the tracking error of the system,increases the robust performance of the system and improves the performance of the continuous rotary electro-hydraulic servo motor.

Repetitive Learning Control for Time-varying Robotic Systems： A Hybrid Learning Scheme

重复学习控制为不明确的变化时间的机器的系统追踪的 finite-time-trajectory 被介绍。在时间函数以一个反复的学习方法被学习的地方，一个混合学习计划被给在系统动力学应付经常、变化时间的 unknowns，没有泰勒表示的帮助，当常规微分学习方法为估计经常的被建议时。介绍重复学习控制为在每个周期的开始的起始的重新定位避免要求，是不同的，并且变化时间的 unknowns 不是必要的周期。随混合学习的采纳，靠近环的系统的州的变量的固定被保证，追踪的错误被保证作为重复增加收敛到零，这被显示出。建议计划的有效性通过数字模拟被表明。

Observer-based Iterative and Repetitive Learning Control for a Class of Nonlinear Systems

In this paper, both output-feedback iterative learning control(ILC) and repetitive learning control(RLC) schemes are proposed for trajectory tracking of nonlinear systems with state-dependent time-varying uncertainties. An iterative learning controller, together with a state observer and a fully-saturated learning mechanism, through Lyapunov-like synthesis, is designed to deal with time-varying parametric uncertainties. The estimations for outputs, instead of system outputs themselves, are applied to form the error equation, which helps to establish convergence of the system outputs to the desired ones. This method is then extended to repetitive learning controller design. The boundedness of all the signals in the closed-loop is guaranteed and asymptotic convergence of both the state estimation error and the tracking error is established in both cases of ILC and RLC. Numerical results are presented to verify the effectiveness of the proposed methods.

REDUCTION APPROACHES FOR VIBRATION CONTROL OF REPETITIVE STRUCTURES

The reduction approaches are presented for vibration control of symmetric, cyclic periodic and linking structures. The condensation of generalized coordinates, the locations of sensors and actuators, and the relation between system inputs and control forces are assumed to be set in a symmetric way so that the control system posses the same repetition as the structure considered. By employing proper transformations of condensed generalized coordinates and the system inputs, the vibration control of an entire system can be implemented by carrying out the control of a number of sub-structures, and thus the dimension of the control problem can be significantly reduced.

FBFN-based adaptive repetitive control of nonlinearly parameterized systems

An adaptive repetitive control scheme is presented for a class of nonlinearly parameterized systems based on the fuzzy basis function network （FBFN）. The parameters of the fuzzy rules are tuned with adaptive schemes. To attenuate chattering effectively, the discontinuous control term is approximated by an adaptive PI control structure. The bound of the discontinuous control term is assumed to be unknown and estimated by an adaptive mechanism. Based on the Lyapunov stability theory, an adaptive repetitive control law is proposed to guarantee the closed-loop stability and the tracking performance. By means of FBFNs, which avoid the nonlinear parameterization from entering into the adaptive repetitive control, the controller singularity problem is solved. The proposed approach does not require an exact structure of the system dynamics, and the proposed controller is utilized to control a model of permanent-magnet linear synchronous motor subject to significant disturbances and parameter uncertainties. The simulation results demonstrate the effectiveness of the proposed method.

Robust H-infinity control of uncertain stochastic time-delay linear repetitive processes

Repetitive processes are a distinct class of 2D systems of both theoretic and practical interest.The robust H-infinity control problem for uncertain stochastic time-delay linear continuous repetitive processes is investigated in this paper.First,sufficient conditions are proposed in terms of stochastic Lyapunov stability theory,It o differential rule and linear matrix inequality technology.The corresponding controller design is then cast into a convex optimization problem.Attention is focused on constructing an admissible controller,which guarantees that the closed-loop repetitive processes are mean-square asymptotically stable and have a prespecified H-infinity performance γ with respect to all energy-bounded input signals.A numerical example illustrates the effectiveness of the proposed design scheme.

A repetitive-PI Current Controller for Boost Single Phase PFC Converters

In this paper, the Author presents the theory and application of repetitive proportional integral current con-troller for boost single phase ac-dc converter with power factor correction (PFC). A repetitive controller which is inserted in series with the proportional integral ( PI) controller shows very low crossover distortion of input current, low total harmonic distortion and very low tracking error when is compared with the con-ventional proportional integral controller. Full analysis of proposed controller is given and Matlab/Simulink is used for simulation. The simulation results show the validity of the proposed control method.

Control of Titanium Alloy Thin Plate Welding Distortion by Trailing Peening

The technology of trailing peening is a kind of promisingly bran-new technology which can be used to control weldingstress and distortion of Ti alloy thin plate. Control of TC4 Ti alloy thn plate welding stress and distortion underthe condition of conventional welding and trailing peening is performed, respectively. The results show that thetechnology of trailing peening effectively reduces deflection and transverse shrinkage of thin plate weldment. Themaximum deflection is decreased from 15 mm under the conditior of conventional welding to 5 mm, while the weldtransverse shrinkage is decreased from 0.5 mm to about 0.1 mm.

An Improved Repetitive Control Strategy for LCL Grid-Connected Inverter

This paper proposes a cascade repetitive control strategy based on odd internal mode,and combines it with proportional-integral(PI)control to establish a compound repetitive control system for improving the quality of grid connected current of LCL grid connected inverter.More specifically,the proposed method could effectively improve the control effect of grid-connected current of LCL inverter,restrain current harmonics and reduce the distortion rate of grid-connected current.Simulation experiment is conducted to verify the proposed repetitive control strategy,and the verification results show that,compared with traditional PI control,the proposed improved compound repetitive control strategy has a higher response speed,and the steady-state and dynamic performance have also been significantly improved.

Dynamic Stiffness Analysis of Repetitive Control System

For dynamic stiffness enhancement, this paper presents a new method for synthesizing repetitive controllers capable of rejecting periodic vibration disturbance. Dynamic stiffness of the control system is analyzed. Direct and quadrature dynamic stiffness are defined for the repetitive controllers’ design. A trade-off method between the determinations of the controller’s parameters is necessary such that both the rejecting performance and stability can be achieved simultaneously. An illustrated example of a twin linear drive system is given to verify the performance of the proposed control design. The control performance of the present method is evaluated in the experimental disturbance rejecting control system, where the real-time control algorithms are implemented using a floating-point digital signal processor. Both computer simulation and experimental results are presented to illustrate the effectiveness of the proposed repetitive controller design.

Repetitive Control Uncertainty Conditions in State Feedback Solution

Repetitive Control (RC) designed with state feedback that includes past error feedforward and current error feedback schemes for linear time-invariant systems is reintroduced. Periodic disturbances are common within repetitive systems and can be represented with a time-delay model. The proposed design focuses on isolating the disturbance model and finding the overall transfer function around the delay model. The use of the small gain theorem around the delay model assures disturbance accommodation if stability conditions are achieved. This paper reintroduces the designed RC controller within the state feedback in the presence of both past error and current error structures. Robustness conditions are investigated and set to enhance system performance in the presence of modelling mismatch, which represents the novel contribution in this paper. Simulations demonstrate the advantages of the robust conditions obtained while improving system performance for dynamic perturbations.

Effect of Repetitive Transcranial Magnetic Stimulation(rTMS)Combined with Repetitive Magnetic Stimulation at Taichong Acupoint(LR3)on Depression:A Protocol for a Randomized Controlled Study

[Objectives]To explore the clinical treatment effect of repetitive transcranial magnetic stimulation(rTMS)combined with repetitive magnetic stimulation at Taichong acupoint(LR3)therapy in the treatment of depression.[Methods]60 patients who met the inclusion standard were chosen as the research subjects.They were split into two sets using a randomized parallel control method,with 30 cases each in the experimental and control groups.The experimental group adopted the treatment with rTMS+repetitive magnetic stimulation at Taichong acupoint(LR3),and the control group adopted the treatment with rTMS alone.The course of treatment was 8 weeks.Then the clinical efficacy,Hamilton Depression Scale 17 item score(HAMD-17),Symptom Check List-90(SCL-90),Patient Health Questionnaire-15(PHQ-15)and Pittsburgh Sleep Quality Index(PSQI)were compared.[Results]After treatment,the scores of HAMD-17,SCL-90,PHQ-15 and PSQI in the two groups were lower than those before and 4 weeks after treatment(P<0.05 or P<0.01),and the scores in the experimental group were inferior to those in the control group(P<0.01),The effective rate was 96.66%in the experimental group and 76.47%in the control group(P<0.05).In the course of treatment,no serious adverse reactions happened in either group.[Conclusions]The rTMS combined with repetitive magnetic stimulation at Taichong acupoint(LR3)can enhance the control of depression in the right frontal lobe,significantly improve the symptoms of depression and somatic discomfort,and improve the sleep quality of patients.It has a wide range of application,and is safe and noninvasive,so it is worthy of clinical promotion.

CYLINDRICITY ERROR COMPENSATION IN DIAMOND TURNING VIA P－INTEGRATOR REPETITIVE CONTROL

ＣＹＬＩＮＤＲＩＣＩＴＹＥＲＲＯＲＣＯＭＰＥＮＳＡＴＩＯＮＩＮＤＩＡＭＯＮＤＴＵＲＮＩＮＧＶＩＡＰ－ＩＮＴＥＧＲＡＴＯＲＲＥＰＥＴＩＴＩＶＥＣＯＮＴＲＯＬＬｉＳｈｅｎｇｙｉ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｔｒｏｎｉｃｓａｎｄＩｎｓｔｒｕｍｅｎｔ...

Design of observer-based discrete repetitive-control system based on 2D model

A discrete observer-based repetitive control(RC) design method for a linear system with uncertainties was presented based on two-dimensional(2D) system theory. Firstly, a 2D discrete model was established to describe both the control behavior within a repetition period and the learning process taking place between periods. Next, by converting the designing problem of repetitive controller into one of the feedback gains of reconstructed variables, the stable condition was obtained through linear matrix inequality(LMI) and also the gain coefficient of repetitive system. Numerical simulation shows an exceptional feasibility of this proposal with remarkable robustness and tracking speed.