The groundwater tracer injection and withdrawal tests are often carried out for the determination of aquifer solute transport parameters.However,the parameter analyses encounter a great difficulty due to the radial fl...The groundwater tracer injection and withdrawal tests are often carried out for the determination of aquifer solute transport parameters.However,the parameter analyses encounter a great difficulty due to the radial flow nature and the variability of the temporal boundary conditions.An adaptive methodology for the determination of groundwater solute transport parameters using tracer injection and withdrawal test data had been developed and illustrated through an actual case.The methodology includes the treatment of the tracer boundary condition at the tracer injection well,the normalization of tracer concentration,the groundwater solute transport finite element modelling and the method of least squares to optimize the parameters.An application of this methodology was carried out in a field test in the South of Hanoi city.The tested aquifer is Pleistocene aquifer,which is a main aquifer and has been providing domestic water supply to the city since the French time.Effective porosity of 0.31,longitudinal dispersivity of 2.2 m,and hydrodynamic dispersion coefficients from D=220 m^(2)/d right outside the pumping well screen to D=15.8 m^(2)/d right outside the tracer injection well screen have been obtained for the aquifer at the test site.The minimal sum of squares of the differences between the observed and model normalized tracer concentration is 0.00119,which is corresponding to the average absolute difference between observed and model normalized concentrations of 0.0355(while 1 is the worst and 0 is the best fit).展开更多
The performance of compact,aggressive ducts in advanced propulsion systems is limited by the internal flow separation coupled with the formation of secondary counter-rotating vortices that give rise to intensive flow ...The performance of compact,aggressive ducts in advanced propulsion systems is limited by the internal flow separation coupled with the formation of secondary counter-rotating vortices that give rise to intensive flow distortions at the duct exit.An experimental investigation was conducted to study the flow field and passive suppression of flow separation and Aerodynamic Interface Plane (AIP) distortion in a serpentine air inlet duct.Tests were performed by a turbofan engine at several Engine Operating Points (EOPs) from 56%(idle) to 100%(max).A large total pressure deficit region arose at the upper part of the AIP,which was associated with the upper surface flow separation.Using the new mechanical S-type vortex generators in two longitudinal positions (VGl and VG2),separation and loss were diminished at the upper part of the duct and AIP.The VG2 arrangement attained the maximum reductions in distortion coefficients which were 73.72%,60.7% and 37.8% in DC(90°),DC(60°) and△P_C/P metrics,respectively.In the next step of the study,some unsteady aspects of the flow field were analyzed inside the duct.The separation onset and reattachment points were determined by the standard deviation of static pressure on the upper surface.The AIP spectral distribution showed that the boundary of low pressure and high pressure recovery regions was dominated by the maximum fluctuations.Furthermore,the PSD diagram of several probes at AIP revealed the vortex shedding frequency and its higher harmonics at separation region.The energy content of distinct unsteady spectral features in the bare configuration was significantly reduced using VGs,which showed the improvement of flow at the duct exit.展开更多
In order to improve the accuracy of auto parts production and processing,and reduce the error of parts manufacturing,a 3D scanning modelling of auto parts for intelligent driving is designed in this paper.With the hel...In order to improve the accuracy of auto parts production and processing,and reduce the error of parts manufacturing,a 3D scanning modelling of auto parts for intelligent driving is designed in this paper.With the help of the structured light projection method,the auto parts image is obtained,and its horizontal axis grey value and stripe pixel value are analysed.The contour parameters are determined by k-frame strategy,and the width,length and height parameters of the external contour of vehicle parts are obtained.The basic principle of 3D scanning technology is analysed,its scanning process is designed,and the modelling of auto parts is realised with the help of 3D scanning technology.The experimental results show that the modelling method can effectively improve the machining accuracy and reduce the manufacturing error of the auto parts.展开更多
文摘The groundwater tracer injection and withdrawal tests are often carried out for the determination of aquifer solute transport parameters.However,the parameter analyses encounter a great difficulty due to the radial flow nature and the variability of the temporal boundary conditions.An adaptive methodology for the determination of groundwater solute transport parameters using tracer injection and withdrawal test data had been developed and illustrated through an actual case.The methodology includes the treatment of the tracer boundary condition at the tracer injection well,the normalization of tracer concentration,the groundwater solute transport finite element modelling and the method of least squares to optimize the parameters.An application of this methodology was carried out in a field test in the South of Hanoi city.The tested aquifer is Pleistocene aquifer,which is a main aquifer and has been providing domestic water supply to the city since the French time.Effective porosity of 0.31,longitudinal dispersivity of 2.2 m,and hydrodynamic dispersion coefficients from D=220 m^(2)/d right outside the pumping well screen to D=15.8 m^(2)/d right outside the tracer injection well screen have been obtained for the aquifer at the test site.The minimal sum of squares of the differences between the observed and model normalized tracer concentration is 0.00119,which is corresponding to the average absolute difference between observed and model normalized concentrations of 0.0355(while 1 is the worst and 0 is the best fit).
文摘The performance of compact,aggressive ducts in advanced propulsion systems is limited by the internal flow separation coupled with the formation of secondary counter-rotating vortices that give rise to intensive flow distortions at the duct exit.An experimental investigation was conducted to study the flow field and passive suppression of flow separation and Aerodynamic Interface Plane (AIP) distortion in a serpentine air inlet duct.Tests were performed by a turbofan engine at several Engine Operating Points (EOPs) from 56%(idle) to 100%(max).A large total pressure deficit region arose at the upper part of the AIP,which was associated with the upper surface flow separation.Using the new mechanical S-type vortex generators in two longitudinal positions (VGl and VG2),separation and loss were diminished at the upper part of the duct and AIP.The VG2 arrangement attained the maximum reductions in distortion coefficients which were 73.72%,60.7% and 37.8% in DC(90°),DC(60°) and△P_C/P metrics,respectively.In the next step of the study,some unsteady aspects of the flow field were analyzed inside the duct.The separation onset and reattachment points were determined by the standard deviation of static pressure on the upper surface.The AIP spectral distribution showed that the boundary of low pressure and high pressure recovery regions was dominated by the maximum fluctuations.Furthermore,the PSD diagram of several probes at AIP revealed the vortex shedding frequency and its higher harmonics at separation region.The energy content of distinct unsteady spectral features in the bare configuration was significantly reduced using VGs,which showed the improvement of flow at the duct exit.
文摘In order to improve the accuracy of auto parts production and processing,and reduce the error of parts manufacturing,a 3D scanning modelling of auto parts for intelligent driving is designed in this paper.With the help of the structured light projection method,the auto parts image is obtained,and its horizontal axis grey value and stripe pixel value are analysed.The contour parameters are determined by k-frame strategy,and the width,length and height parameters of the external contour of vehicle parts are obtained.The basic principle of 3D scanning technology is analysed,its scanning process is designed,and the modelling of auto parts is realised with the help of 3D scanning technology.The experimental results show that the modelling method can effectively improve the machining accuracy and reduce the manufacturing error of the auto parts.
