A fast commonly-used algorithm of P-III distribution curve and its application

Based on theoretical analysis and studying other methods, P-III curve is transformed into an incomplete G function by means of mathematical expression transformation, thus the mathematical model of the fast commonly-used algorithm is drawn out. Algorithm comparison and practices demonstrate that the mathematical model has an easy algorithm, agile resolution process, very good commonality, faster convergence rate and better calculation accuracy, and can be applied to other respects.

THE RELATIONSHIP OF QUARTILE CHARACTERISTIC VALUES BETWEEN DENSITY CURVE AND DISTRIBUTION CURVE

The characteristics of density yield curve of coal and distribution curve of products can be described with median, quartile deviation, the quartile measure of skewness and kurtosis like K. On the basis of 16 groups of coal density composition data and their jigging stratification data derived from the pilot jig, the regression analysis has been done for the relationship between the characteristic values of the density curve and the characteristic values of the distribution curve.The results show as follow: (1) The bigger the skewness of the density curve, the bigger the probable error (Ep) and imperfection (I ) are. (2) The bigger the median of density curve, the smaller the probable error or imperfection is. (3) The characteristic values of density curve have no influence on the kurtosis K of the distribution curve.

A STUDY ON JIG DISTRIBUTION CURVE TRANSFORMATION

An investigation of the errors resulted from distribution curve transformations using six different methods was made on the basis of 61 sets of jig performance test data from the coal preparation plants in China. The results indicate that minimum error occurred when distribution curves were transformed by keeping imperfection I constant. Generalized distribution curves are developed for jigs and their applications are discussed.

A refined representation method of the particle size distribution curve based on grading entropy

The particle size distribution(PSD)curve is an important expression of the basic properties of the soil.The characteristic parameters such as median particle size D_(50),effective particle size D_(10),and some combinations of characteristic parameters can only represent some points of the PSD curve,failing to represent all information of the PSD curve.In this paper,a fraction characteristic parameter F that could reflect the fraction size variation of the PSD curve was introduced based on grading entropy.And a new presentation method of the A-B-F three parameters was proposed for a refined representation of the PSD curve.It was found that the newly constructed model not only better represents the differences in the width of PSD curves but also has a higher sensitivity than the A-B two-parameter model proposed by Lőrincz.For PSD curves with similar distributions,the new presentation method has a higher degree of discrimination than that of the D_(50)-C_(u)-C_(c) three-parameter or the four-parameter combination G_(c) proposed by Arshad.Finally,the application of this new method in describing the spatial nonuniformity distribution of depositions and predicting the soil hydraulic conductivity was discussed.The research results can provide a reference for the refined representation of PSD curves.

An improved model of partition curve based on accumulation normal distribution function

Extensive studies based on partition curve of gravity separation have been investigated. All created models are merely used to simulate density distribution at the same size fraction. However, they cannot be used to predictive distribution of materials depending on compound feature of density and size. According to this situation, an improved model of partition curve based on accumulation normal distribution, which was distinguished from conventional model of accumulation normal distribution for partition curve, was proposed in this paper. It could simulate density distribution at different size fractions by using the density-size compound index and conflating the partition curves at different size fractions as one partition curve. The feasibility of three compound indexes, including mass index, settlement index and transformation index, were investigated. Specific forms of the improved model were also proposed. It is found that transformation index leads to the best fitting results, while the fitting error is only 1.75 according to the fitting partition curve.

Fuzzy Words Distribution in Management Science Research Articles

By using ZHANG Qiao＇s method for identifying fuzzy words （1998）, the present paper makes a statistic analysis of fuzzy words appearing in about 43,000 words of 6 academic research articles in management science. A distribution curve of fuzzy words in management research articles is drawn in accordance with the structures of the articles, and it is proved to be reasonable for tile discourse function of each section. Furthermore, the fuzzy words are divided into three categories and eleven sub-categories, including Category Ⅰ-fuzzy words, Category Ⅱ-fuzzy words＋non-fuzzy part / non-fuzzy part＋fuzzy words, Category Ⅲ-approximators＋fuzzy words. Distribution of fuzzy words varies in different sections of research articles in management science, because of different communicative purposes or discourse functions. Introduction section and Conclusion section have a higher occurrence rate of fuzzy words than Abstract section and Methodology and Data section.

Assessment of Spatial Distribution and Submerged Scope for Storm Surge in the Pearl River Delta Region

The aim of this study was to explore the spatial distribution and submerged scope for storm surge in the Pearl River Delta(PRD) region.Based on the data of storm surges in the PRD region in the past 30 years,the return periods of 12 tide-gauge stations for storm surges were calculated separately with the methods of Gumbel and Pearson-III.The data of another six tide-gauge stations in Guangdong Coast was quoted to depict the overall features of storm surges in Guangdong.Using least-square method,the spatial distribution models of storm surges in different return periods were established to reveal the distribution rule of the set-up values of storm surges.The spatial distribution curves of storm surges in different return periods in the PRD Region were drawn up based on the models and the terrain of Guangdong Coast.According to the curves,the extreme set-up values of storm surges in 1 000,100,10 a return periods were determined on each spot of Guangdong Coast.Applying the spatial analysis technology of ArcGIS,with the topography data of the PRD Region,the submerged scopes of flood caused by storm surge in 1 000,100,10 a return periods were drawn up.The loss caused by storm surges was estimated.Results showed that the storm surges and the topography of PRD region jointly led to the serious flood in the PRD region.This assessment would be useful for the planning and design department to make decision and provide government scientific basis for storm surge prediction,coastal engineering designing and the prevention of storm surge disaster.

Temperature field distribution of burnt surrounding rock in UCG stope

In order to study temperature field distribution in burnt surrounding rock and to determine ranges of burnt surrounding rock, coal-wall coking cycle and heat influence in the underground coal gasification(UCG) stope, based on the Laplace transform and inversion formula, we studied the temperature analytical solution of one-dimensional unsteady heat conduction for multi-layer overlying strata under the first and the forth kinds of boundary conditions, and we also carried out a numerical simulation of twodimensional unsteady heat conduction by the COMSOL multiphysics. The results show that when the boundary temperature of surrounding rock has a linear decrease because of a directional movement of heat source in the UCG flame working face, the temperature in surrounding rock increases first and then decreases with time, the peak of temperature curve decreases gradually and its position moves inside surrounding rock from the boundary. In the surrounding rock of UCG stope, there is an envelope curve of temperature curve clusters. We analyzed the influence of thermophysical parameters on envelope curves and put forward to take envelope curve as the calculation basis for ranges of burnt surrounding rock, coal-wall coking cycle and heat influence. Finally, the concrete numerical values are given by determining those judgement standards and temperature thresholds, which basically tally with the field geophysical prospecting results.

Influence of impulse waves generated by rocky landslides on the pressure exerted on bank slopes

Rocky landslides on river banks can result in the generation of ultra-high waves,which may destroy structures on the opposite bank.Existing methods to calculate the pressure on bank slopes under the effect of impulse waves generated by landslides are,however,few and of low precision.Therefore,in this study,a three-dimensional physical model test was conducted by taking into account factors such as landslide geometry parameters and the bank slope angle.The model test section was generalized on the basis of a certain section of the Three Gorges reservoir area as a prototype,after which the wave parameters and wave pressure acting on the bank slope were measured.Subsequently,the magnitude,acting point,and distribution of the pressure of the impulse waves generated by the rocky landslide upon the bank slope were determined.The distribution curve of the impact pressure was similar to that calculated using theСНиПⅡ57-75 formula,and the experimental pulsating pressure value was close to the value calculated using the Subgrade formula.Based on the test results,a power function of the relative pulsating pressure steepness with respect to the reciprocal of the wave steepness,relative water depth,and slope ratio was proposed.The acting point of the maximum pulsating pressure was found to be located near the still water level.Finally,an empirical formula for calculating the envelope of the maximum pulsating pressure distribution curve was proposed.These formulas can serve as a theoretical basis for the prediction of impulse wave pressure generated owing to landslides on bank slopes.

Development of a drill energy utilization index for aiding selection of drill machines in surface mines

Drill machines used in surface mines, particularly in coal, is characterized by a very poor utilization （around 40%） and low availability （around 60%）. The main purpose of this study is to develop a drill selec- tion methodology and simultaneously a performance evaluation technique based on drill cuttings produced and drilling rate achieved. In all 28 blast drilled through were investigated. The drilling was accomplished by 5 different drill machines of Ingersoll-Rand and Revathi working in coal mines of Sonepur Bazari （SECL） and Block-II （BCCL）. The drills are Rotary and Rotary Percussive type using tri- cone rock roller bits. Drill cuttings were collected and sieve analysis was done in the laboratory. Using Rosin Ramler Diagram, coarseness index （CI）, mean chip size （d）, specific-st trace area （SSA） and charac- teristic particle size distribution curves for all the holes drilled were plotted. The predictor equation for drill penetration rate established through multiple regressions was found to have a very good correlation with an index of determination of 0.85. A comparative analysis of particle size distribution curves was used to evaluate the drill efficiency. The suggested approach utilises the area under the curve, after the point of trend reversal and brittleness ratio of the respective bench to arrive at drill energy utilization index （DEUI）, for mapping of drill machine to bench, The developed DEU1 can aid in selecting or mapping a right machine to right bench for achieving higher penetration rate and utilizations.

Identifying indigenous tree species for land reforestation,forest restoration, and plantation transformation on Hainan Island, China

Selecting suitable species is the most important issue for bare land reforestation, degraded secondary forest restoration, and single-species plantation transformation. However, little information has been documented related to tree species selection for these silvicultural endeavors on tropical Hainan Island of Southern China. The present study employed Baisha County, the ecological core area of Hainan Island, as a case study area. We initially inventoried a slightly disturbed primary forest and attempted to produce diameter distribution curves for each tree species. Second, the tree species were classified into shade intolerant, opportunist, and shade tolerant species based on shape of their diameter distribution curves. Third, market value was determined for each tree species based on published literature and on-site investigations at local wood trading companies. Totally 118 tree species were encountered in the inventoried forest and 13 tree species present were finally identified as potential tree species for our silvicultural endeavor on Hainan Island, of which 3 species are shade intolerant, 5 species are opportunist and 5 species are shade tolerant. Additionally, we also selected 12 tree species that were not in the inventoried forest but were extremely economically valuable and ecologically important. This study should contribute to the formulation of a sustainable forest management strategy on Hainan Island and the methodology might be replicated in other tropical region where suitable species also need to be identified for silvicultural endeavor.

Physical and numerical investigation on fluid flow and inclusion removal behavior in a single-strand tundish

Aiming at the problem that the existence of inclusions in the tundish continuous casting process can easily lead to quality defects of the slab,the stainless steel continuous casting tundish was taken as the research object.The effects of flow control device,inclusion density and inclusion size on the mixing characteristics of molten steel and inclusion behavior in tundish were studied.The results showed that compared with the tundish without flow control device,the average residence time of molten steel was prolonged by about 49 s,the dead zone volume fraction was reduced by 8.93%,and the piston fluid integral rate was increased by 12.68%.In the turbulence inhibitor(TI)tundish with weir-dam combination,the removal rate of inclusions with a density of 2700 kg m^(-3) and a particle size of 5 lm is 63.32%,while the removal rate of large inclusions with a density of 150μm could reach 89.04%.When the inclusion particle size was 10-50μm and the density was 2700-4500 kg m^(-3),the effect of inclusion density on inclusion removal rate was small.At the same time,when weir-dam combination TI tundish was set,the inclusions were mainly limited to the slag-metal interface of the first and second chambers of the tundish.The removal rate of inclusions in the first chamber was generally improved,with 10μm inclusions accounting for 47.67% and 150μm inclusions accounting for 60.69%.Furthermore,it has the best effect on the removal of small-size inclusions,especially those less than 70μm.

Influence of non-iso-velocity casting on flow-field index of a 41-ton six-strand Tundish by physical and numerical modeling

The flow-field index in a 41-ton six-strand tundish is considered through adjusting the ratio of the casting velocity between the strands to eliminate the negative impact of iso-velocity casting in multi-strand tundish on the consistency of each strand due to the large ratio of length to width with narrow shape structure,resulting in poor consistency of each strand.In particular,the response time of strand-1 and strand-6 is relatively long,which affects the uniformity of the temperature field and flow field of the entire tundish.On the basis of verifying that the error between the numerical simulations and hydraulic experiments is less than 6%,six cases with the casting velocity ratio changing from 0.8 to 1.3(with an interval of 0.1)are considered by calculation of numerical models.It is concluded that the consistency of each flow can be obviously improved by increasing the casting velocity ratio between side-strand and middle-strand.With increasing the casting velocity ratio,the flow field in the tundish became much active,the temperature field presented well uniformity,and the tracer concentration distribution in local dead zones was improved.

Establishment of a Hybrid Rainfall-Runoff Model for Use in the Noah LSM

There is an increasing trend to incorporate the basin hydrological model into the traditional land surface model （LSM） to improve the description of hydrological processes in them. For incorporating with the Noah LSM, a new rainfall-runoff model named XXT （the first X stands for Xinanjiang, the second X stands for hybrid, and T stands for TOPMODEL） was developed and presented in this study, based on the soil moisture storage capacity distribution curve （SMSCC）, some essential modules of the Xinanjiang model, together with the simple model framework of the TOPMODEL （a topography based hydrological model）. The innovation of XXT is that the water table is incorporated into SMSCC and it connects the surface runoff production with base flow production. This improves the description of the dynamically varying saturated areas that produce runoff and also captures the physical underground water level. XXT was tested in a small-scale watershed Youshuijie （946 km2） and a large-scale watershed Yinglouxia （10009 km2） in China. The results show that XXT has better performance against the TOPMODEL and the Xinanjiang model for the two watersheds in both the calibration period and the validation period in terms of the Nash-Sutcliffe efficiency. Moreover, XXT captures the largest peak flow well for both the small： and large-scale watersheds during the validation period, while the TOPMODEL produces significant overestimates or underestimates, so does the Xinanjiang model.

A Comparison of Five Different Techniques to Determine Hydraulic Conductivity of a Riparian Soil in North Bavaria, Germany

Soil saturated hydraulic conductivity(K_s) is a predominant input factor when forecasting the vertical transport of contaminants through the soil or when estimating the flood retention capacity of the soil. Displacement of contaminants in the soil over extended periods of time can be attributed mainly to matrix flow, whereas flow through macropores becomes significant under untypically wet conditions, e.g., during spills or rain storms. To obtain matrix conductivities for a soil, the effects of macropores should be excluded.However, the K_s values of a soil profile are unlikely to be reflected solely by pedotransfer tables based on soil texture and bulk density.In this study, we examined five different methods(pedotransfer table, soil core, borehole permeameter, particle-size distribution curve, and instantaneous profile) to determine K_s values for a mercury-contaminated riparian soil for subsequent simulation of longterm mercury displacement toward groundwater. We found that the determined K_s values increased in the following order: borehole permeameter < particle-size distribution curve < pedotransfer table < instantaneous profile < soil core. The instantaneous profile method yielded K_s values of matrix flow, which additionally reflected the structure-related features of K_s values as provided by the soil core method. Despite being labor intensive and requiring expensive field sensors, the instantaneous profile method may provide the best representative in-situ K_s values for the studied site.

Schottky barrier parameters and structural properties of rapidly annealed Zr Schottky electrode on p-type GaN

The Schottky barrier junction parameters and structural properties of Zr/p-GaN Schottky diode are explored at various annealing temperatures.Experimental analysis showed that the barrier height（BH）of the Zr/pGa N Schottky diode increases with annealing at 400°C（0.92 eV（I–V）/1.09 e V（C–V））compared to the asdeposited one（0.83 eV（I–V）/0.93 eV（C–V））.However,the BH decreases after annealing at 500°C.Also,at different annealing temperatures,the series resistance and BH are assessed by Cheung’s functions and their values compared.Further,the interface state density（NSS/of the diode decreases after annealing at 400°C and then somewhat rises upon annealing at 500°C.Analysis reveals that the maximum BH is obtained at 400°C,and thus the optimum annealing temperature is 400°C for the diode.The XPS and XRD analysis revealed that the increase in BH may be attributed to the creation of Zr–N phases with increasing annealing up to 400°C.The BH reduces for the diode annealed at 500°C,which may be due to the formation of Ga–Zr phases at the junction.The AFM measurements reveal that the overall surface roughness of the Zr film is quite smooth during rapid annealing process.

High accuracy in automatic detection of atrial fibrillation for Holter monitoring

Atrial fibrillation(AF) has been considered as a growing epidemiological problem in the world,with a substantial impact on morbidity and mortality.Ambulatory electrocardiography(e.g.,Holter) monitoring is commonly used for AF diagnosis and therapy and the automated detection of AF is of great significance due to the vast amount of information provided.This study presents a combined method to achieve high accuracy in AF detection.Firstly,we detected the suspected transitions between AF and sinus rhythm using the delta RR interval distribution difference curve,which were then classified by a combination analysis of P wave and RR interval.The MIT-BIH AF database was used for algorithm validation and a high sensitivity and a high specificity(98.2% and 97.5%,respectively) were achieved.Further,we developed a dataset of 24-h paroxysmal AF Holter recordings(n=45) to evaluate the performance in clinical practice,which yielded satisfactory accuracy(sensitivity=96.3%,specificity=96.8%).

Temperature Field of PC Box Girder Bridge Based on GPRS Temperature Collection System

In order to study the temperature distribution and the corresponding temperature effects on pre-stressed concrete（PC） curved box girder bridge in Shandong Province, this paper builds and adopts an automatic remote real-time temperature collection system to collect temperature data on site, and further uses the software ANSYS for analysis. Based on the comparisons between the measured data and the simulation results, the following conclusions can be drawn： 1 Our temperature monitoring system is reliable; 2 The corresponding measured data of the web plate and flange plate exposed to the sun, vary more severely than that at other positions, so these plates need higher standard design and construction requirements; 3 In the cold wave where still is sunshine, the box girder temperature effect behaves as sine-like curve.