Key technologies for medium and low voltage DC distribution system

Development of the medium and low voltage DC distribution system is of great significance to a regional transmission of electric energy,increasing a penetration rate of new energy,and enhancing a safety of the operation of the AC/DC interconnected grid.This paper first summarizes the medium and low voltage DC distribution system schemes and plans put forward by many countries,and then elaborate status of under-construction medium and low voltage DC distribution system project cases in China.Based on these project cases,this paper analyzes key issues involved in the medium and low voltage DC distribution system topologies,equipment,operation control technologies and DC fault protections,in order to provide theoretical and technical reference for future medium and low voltage DC distribution system-related projects.Finally,this paper combines a current China research status to summarize and give a prediction about the future research direction of medium and low voltage DC distribution system,which can provide reference for the research of medium and low voltage DC distribution system.

Distribution of Inherent Strains and Residual Stressesin Medium Thickness Plate Weldment

A fundamental theory for the analysis of residual welding stresses and deformation based on the inherent strain distribution along the welded joint is introduced. Distribution of inherent strains and longitudinal residual stresses in medium thickness plate weldment is calculated and analyzed. A new method of calculating inherent strains and longitudinal residual stresses is proposed.

Calculation of the Hardness Space Distribution in the As Quenched Condition of a Medium Hardening Tool Steel

The calculation of the hardness profile is a powerful tool for the selection of the right steel for a given purpose. Computer programs INC-PHATRAN and INDUCTER-B were formerly developed by the authors for the calculation of hardness profiles after heat treatment processes of low alloy and carbon steels. The first one simulates quenching as well as through hardening operations, and the second one models electromagnetic induction heat treatments processes. These codes make use of the SAE Standard 3406 in order to obtain the hardness profile, with enhanced regression coefficients recently obtained by the authors. The present work broadens the field of application of this method, allowing to apply it for low hardenability tool steels such as the ASTM O1 Tool Steel. The method used for the calculation of the hardness profile is here summarized, and an example of application is described, which shows good correspondence between the calculated and measured values.

Performance Analysis of WLAN Medium Access Control Protocols in Simulcast Radio-Over-Fiber-Based Distributed Antenna Systems

The performance of three wireless local-area network(WLAN) media access control(MAC) protocols is investigated and compared in the context of simulcast radioover-fiber-based distributed antenna systems(RoF-DASs) where multiple remote antenna units(RAUs) are connected to one access point(AP) with different-length fiber links.The three WLAN MAC protocols under investigation are distributed coordination function(DCF) in basic access mode,DCF in request/clear to send(RTS/CTS) exchange mode,and point coordination function(PCF).In the analysis,the inter-RAU hidden nodes problems and fiber-length difference effect are both taken into account.Results show that adaptive PCF mechanism has better throughput performances than the other two DCF modes,especially when the inserted fiber length is short.

城市电热综合能源系统分布式鲁棒经济调度

可再生能源波动性和热力系统运行特性对城市电热综合能源系统的经济调度影响显著。基于分布式鲁棒理论、热力管网和分布式蓄热设备的介质温度特性,提出了一种城市电热综合能源系统分布式鲁棒经济调度模型。通过合理利用热力系统灵活调控特性,可有效降低运行成本、提高风电消纳水平。同时,通过分布式鲁棒优化理论,得到可再生能源出力最恶劣概率分布下的经济调度方案,有效提升风电消纳的安全性。最后,通过算例验证了所提模型的有效性。

Coordination Control of Power Flow Controller and Hybrid DC Circuit Breaker in MVDC Distribution Networks

The two main challenges of medium voltage direct current(MVDC)distribution network are the flexible control of power flow(PF)and fault protection.In this paper,the power flow controller(PFC)is introduced to regulate the PF and inhibit the fault current during the DC fault.The coordination strategy of series-parallel PFC(SP-PFC)and hybrid DC circuit breaker(DCCB)is proposed.By regulating the polarity and magnitude of SP-PFC output voltage during the fault,the rising speed of fault current can be suppressed so as to reduce the breaking current of hybrid DCCB.The access mode of SP-PFC to the MVDC distribution network and its topology are analyzed,and the coordination strategy between SP-PFC and hybrid DCCB is investigated.Moreover,the emergency control and bypass control strategies of SP-PFC are developed.On this basis,the mathematical model of SP-PFC in different fault stages is derived.With the equivalent model of SP-PFC,the fault current of the MVDC distribution network can be calculated accurately.A simulation model of the MVDC distribution network containing SP-PFC is established in MATLAB/Simulink.The fault current calculation result is compared with the simulation result,and the effectiveness of the proposed coordination strategy is verified.