The Impact of Changing Climate on Agroforestry Tree Distribution across Agroecological Zones of Nigeria: MaxEnt Modelling Perspective

The survival of agroforestry tree species in sub-Saharan Africa is essential for sustainable livelihoods, particularly in the semi-arid environment. Drought in the Agroecological zones (AEZ) of Nigeria is one of the environmental factors limiting parkland tree regeneration. Species distribution modelling offers the opportunity to predict future distributions of plant species based on current distribution data and bioclimatic variables. Maxent (maximum entropy) model was employed to predict the future tree distribution in AEZ parklands, under the four Representative Concentration Pathway (RCP) climate change prediction using current tree distribution (presence-only data) along a transect across three agroecological zones. The spatial data used were 19 bioclimatic variables and presence-only data for the two most important tree species—Parkia biglobosa and Vitellaria paradoxa. The result showed a drastic reduction (>45%) in the suitability of farmlands across predictions observed in the studied agroecological zones. The 2050 scenario in both species predicted areas had an increasing mid-range potential, over 44% lower suitability in sampled AEZ distribution predictions. The future prediction potential distribution maps for year 2070 of both species displayed large variations in suitability compared to 2050, showing a significant increase (up to 53%) in areas climatically suitable for both species to regenerate and thrive. This is attributed to over increased annual evapotranspiration, despite increasing seasonal precipitation. This study highlights the need for more climate-smart regeneration and improved restoration strategies to reduce land degradation as climate conditions change over time.

The numerical simulation and inversion fitting of radon concentration distribution in homogeneous overburden above active fault zones

Based on the convection and diffusion mechanisms of radon migration, in this paper we deduce the two-dimensional differential equation for radon transportation in the overburden above active fault zones with an unlimited extension along the strike. Making use of the finite difference method, the radon concentration distribution in the overburden above active faults is calculated and modeled. The active fault zone parameters, such as the depth and the width of the fault zone, and the value of radon concentration, can be inverted from the measured radon concentration curve. These realize quantitative interpretation for radon concentration anomalies. The inversion results are in good agreement with the actual fault zone parameters.

Oxide distribution and microstructure in welding zones from porthole die extrusion

The oxide distribution and microstructure in longitudinal and transverse welding zones during the billet-to-billet extrusion process through porthole die were adequately investigated by means of finite element method,scanning electron microscopy and optical microscopy.The results indicate that the oxides exist at the interface between the matrix and transverse welding zone rather than longitudinal welding seam.The longitudinal welding zone reveals a darker band including the largest grain with irregular shape due to the abnormal grain growth under the heavy shear deformation and high temperature.The transverse welding zone consists of equiaxed recrystallized grains which are a little finer than those in the longitudinal welding seam.

Efficient and Stable Perovskite Solar Cells and Modules Enabled by Tailoring Additive Distribution According to the Film Growth Dynamics

Gas quenching and vacuum quenching process are widely applied to accelerate solvent volatilization to induce nucleation of perovskites in blade-coating method.In this work,we found these two pre-crystallization processes lead to different order of crystallization dynamics within the perovskite thin film,resulting in the differences of additive distribution.We then tailor-designed an additive molecule named 1,3-bis(4-methoxyphenyl)thiourea to obtain films with fewer defects and holes at the buried interface,and prepared perovskite solar cells with a certified efficiency of 23.75%.Furthermore,this work also demonstrates an efficiency of 20.18%for the large-area perovskite solar module(PSM)with an aperture area of 60.84 cm^(2).The PSM possesses remarkable continuous operation stability for maximum power point tracking of T_(90)>1000 h in ambient air.

Differential distribution of PINK1 and Parkin in the primate brain implies distinct roles

The vast majority of in vitro studies have demonstrated that PINK1 phosphorylates Parkin to work together in mitophagy to protect against neuronal degeneration.However,it remains largely unclear how PINK1 and Parkin are expressed in mammalian brains.This has been difficult to address because of the intrinsically low levels of PINK1 and undetectable levels of phosphorylated Parkin in small animals.Understanding this issue is critical for elucidating the in vivo roles of PINK1 and Parkin.Recently,we showed that the PINK1 kinase is selectively expressed as a truncated form(PINK1–55)in the primate brain.In the present study,we used multiple antibodies,including our recently developed monoclonal anti-PINK1,to validate the selective expression of PINK1 in the primate brain.We found that PINK1 was stably expressed in the monkey brain at postnatal and adulthood stages,which is consistent with the findings that depleting PINK1 can cause neuronal loss in developing and adult monkey brains.PINK1 was enriched in the membrane-bound fractionations,whereas Parkin was soluble with a distinguishable distribution.Immunofluorescent double staining experiments showed that PINK1 and Parkin did not colocalize under physiological conditions in cultured monkey astrocytes,though they did colocalize on mitochondria when the cells were exposed to mitochondrial stress.These findings suggest that PINK1 and Parkin may have distinct roles beyond their well-known function in mitophagy during mitochondrial damage.

Multi-Stage Voltage Control Optimization Strategy for Distribution Networks Considering Active-Reactive Co-Regulation of Electric Vehicles

The high proportion of uncertain distributed power sources and the access to large-scale random electric vehicle(EV)charging resources further aggravate the voltage fluctuation of the distribution network,and the existing research has not deeply explored the EV active-reactive synergistic regulating characteristics,and failed to realize themulti-timescale synergistic control with other regulatingmeans,For this reason,this paper proposes amultilevel linkage coordinated optimization strategy to reduce the voltage deviation of the distribution network.Firstly,a capacitor bank reactive power compensation voltage control model and a distributed photovoltaic(PV)activereactive power regulationmodel are established.Additionally,an external characteristicmodel of EVactive-reactive power regulation is developed considering the four-quadrant operational characteristics of the EVcharger.Amultiobjective optimization model of the distribution network is then constructed considering the time-series coupling constraints of multiple types of voltage regulators.A multi-timescale control strategy is proposed by considering the impact of voltage regulators on active-reactive EV energy consumption and PV energy consumption.Then,a four-stage voltage control optimization strategy is proposed for various types of voltage regulators with multiple time scales.Themulti-objective optimization is solved with the improvedDrosophila algorithmto realize the power fluctuation control of the distribution network and themulti-stage voltage control optimization.Simulation results validate that the proposed voltage control optimization strategy achieves the coordinated control of decentralized voltage control resources in the distribution network.It effectively reduces the voltage deviation of the distribution network while ensuring the energy demand of EV users and enhancing the stability and economic efficiency of the distribution network.

Effects of aggregate size distribution and carbon nanotubes on the mechanical properties of cemented gangue backfill samples under true triaxial compression

The mechanical behavior of cemented gangue backfill materials(CGBMs)is closely related to particle size distribution(PSD)of aggregates and properties of cementitious materials.Consequently,the true triaxial compression tests,CT scanning,SEM,and EDS tests were conducted on cemented gangue backfill samples(CGBSs)with various carbon nanotube concentrations(P_(CNT))that satisfied fractal theory for the PSD of aggregates.The mechanical properties,energy dissipations,and failure mechanisms of the CGBSs under true triaxial compression were systematically analyzed.The results indicate that appropriate carbon nanotubes(CNTs)effectively enhance the mechanical properties and energy dissipations of CGBSs through micropore filling and microcrack bridging,and the optimal effect appears at P_(CNT)of 0.08wt%.Taking PSD fractal dimension(D)of 2.500 as an example,compared to that of CGBS without CNT,the peak strength(σ_(p)),axial peak strain(ε_(1,p)),elastic strain energy(Ue),and dissipated energy(U_(d))increased by 12.76%,29.60%,19.05%,and90.39%,respectively.However,excessive CNTs can reduce the mechanical properties of CGBSs due to CNT agglomeration,manifesting a decrease inρ_(p),ε_(1,p),and the volumetric strain increment(Δε_(v))when P_(CNT)increases from 0.08wt%to 0.12wt%.Moreover,the addition of CNTs improved the integrity of CGBS after macroscopic failure,and crack extension in CGBSs appeared in two modes:detour and pass through the aggregates.Theσ_(p)and U_(d)firstly increase and then decrease with increasing D,and porosity shows the opposite trend.Theε_(1,p)andΔε_(v)are negatively correlated with D,and CGBS with D=2.150 has the maximum deformation parameters(ε_(1,p)=0.05079,Δε_(v)=0.01990)due to the frictional slip effect caused by coarse aggregates.With increasing D,the failure modes of CGBSs are sequentially manifested as oblique shear failure,"Y-shaped"shear failure,and conjugate shear failure.

Effect of droplet characteristics on liquid-phase distribution in spray zone of internal mixing air-mist nozzle

In continuous casting production,droplet characteristics are important parameters for evaluating the nozzle atomization quality,and have a significant impact on the secondary cooling effect and the slab quality.In order to study the behavior of atomized droplets after reaching the slab surface and to optimize the spray cooling effect,the influence of droplet diameter and droplet velocity on the migration behavior of droplets in the secondary cooling zone was analyzed by FLUENT software.Results show that the droplets in the spray zone and on the slab surface are mainly concentrated in the center,thus,the liquid volume fraction in the center is higher than that of either side.As the droplet diameter increases,the region of high liquid volume fraction on the slab surface becomes wider,and the liquid phase distribution in the slab width direction becomes uneven.Although increasing the droplet velocity at the nozzle exit has little effect on droplet diffusion in the spray zone,the distribution becomes more uneven due to more liquid reaches the slab surface per unit time.A prediction formula of the maximum water flow rate on the slab surface for specific droplet characteristics was proposed based on dimensionless analysis and validated by simulated data.A nozzle spacing of 210 mm was recommended under the working conditions in this study,which ensures effective coverage of the spray water over the slab surface and enhances the distribution uniformity of water flow rate in the transverse direction.

A"messenger zone hypothesis"based on the visual three-dimensional spatial distribution of motoneurons innervating deep limb muscles

Coordinated contraction of skeletal muscles relies on selective connections between the muscles and multiple classes of the spinal motoneuro ns.Howeve r,current research on the spatial location of the spinal motoneurons innervating differe nt muscles is limited.In this study,we investigated the spatial distribution and relative position of different motoneurons that control the deep muscles of the mouse hindlimbs,which were innervated by the obturator nerve,femoral nerve,inferior gluteal nerve,deep pe roneal nerve,and tibial nerve.Locations were visualized by combining a multiplex retrograde tracking technique compatible with three-dimensional imaging of solvent-cleared o rgans(3DISCO)and 3-D imaging technology based on lightsheet fluorescence microscopy(LSFM).Additionally,we propose the hypothesis that"messenger zones"exist as interlaced areas between the motoneuron pools that dominate the synergistic or antagonist muscle groups.We hypothesize that these interlaced neurons may participate in muscle coordination as messenger neurons.Analysis revealed the precise mutual positional relationships among the many motoneurons that innervate different deep muscles of the mouse.Not only do these findings update and supplement our knowledge regarding the overall spatial layout of spinal motoneurons that control mouse limb muscles,but they also provide insights into the mechanisms through which muscle activity is coordinated and the architecture of motor circuits.

Distribution and genesis of the anomalously high porosity zones in the middle-shallow horizons of the northern Songliao Basin

High-quality reservoirs occur in the middle-shallow horizons of the northern Songliao Basin. The distribution and genesis of their anomalously high porosity zones were studied using measured porosities, examination of ordinary thin sections and blue epoxy resin-impregnated thin sections and by SEM. The results show that there are three anomalously high porosity zones at the depth of 450-900 m, 1,300-1,900 m, 2,050-2,350 m respectively, named zone i, zone ii and zone iii from top to bottom. Horizontally, zone i and zone ii are distributed all over the basin except in the Southeastern Uplift, while zone iii is only distributed in the Central Depression. Zone i was formed by meteoric water leaching as well as organic acid dissolution. Zones ii and iii were dominantly formed by organic acid dissolution. Additionally, clay mineral transformation generating H＋ and hydrocarbon emplacement retarding the cementation of sandstones are also important for the formation of zones ii and iii.

Spatio-temporal distribution of malaria vectors(Diptera:Culicidae) across different climatic zones of Iran

Malaria is a main vector-borne public health problem in Iran.The last studies on Iranian mosquitoes show 31 Anopheles species including different sibling species and genotypes,eight of them are reported to play role in malaria transmission.The objective of this study is to provide a reference for malaria vectors of Iran and to map their spatial and temporal distribution in different climatic zones.Shape files of administrative boundaries and climates of Iran were provided by National Cartographic Center.Data on distribution and seasonal activity of malaria vectors were obtained from different sources and a databank in district level was created in Excel 2003, inserted to the shape files and analyzed by ArcGIS 9.2 to provide the maps.Anopheles culicifacies Giles s.l.,Anopheles dthali Patton,Anopheles fluviatilis James s.L,Anopheles maculipennis Meigen s.L,Anopheles sacharovi Favre,Anopheles stephensi IJston,and Anopheles superpictus Grassi have been introduced as primary and secondary malaria vectors and Anopheles puicherrimus Theobald as a suspected vector in Iran.Temporal distribution of anopheline mosquitoes is restricted to April_December in northern Iran,however mosquitoes can be found during the year in southern region.Spatial distribution of malaria vectors is different based on species,thus six of them(except for Anopheles maculipennis s.l.and Anopheles sacharovi) are reported from endemic malarious area in southern and southeastern areas of Iran.The climate of this part is usually warm and humid,which makes it favorable for mosquito rearing and malaria transmission.Correlation between climate conditions and vector distribution can help to predict the potential range of activity for each species and preparedness for malaria epidemics.

Distribution of Cu and Pb in particle size fractions of urban soils from different city zones of Nanjing, China

Soil samples from 4 defined city zones of Nanjing were randomly collected at 0-5 cm and 5-20 cm intervals and size fractions of soil particles were separated from undisturbed bulk soils by low energy dispersion procedure. The total contents of Cu and Pb in the different particle size fractions of the urban soils were analyzed by HNO3-HF-HClO4 digestion and flame atomic absorption spectrophotometer determination. The total content of Cu and Pb in soil particle size fractions varied with their size and with city zones as well. Both the content and variation with the size fractions of Pb was bigger than of Cu supporting our previous finding that there was Pb pollution to different degrees in the urban soils although the two elements were generally enriched in clay-sized fraction. Contaminated Pb tended to be preferentially enriched in the size fraction of 2000-250 μm and clay-sized fraction. While the size fractions of the soils from newly developed and preserved area contained smaller amount of Cu and Pb, the partitioning of them in coarse and fine particle size fractions were insignificant compared to that from inner residence and commercial area. The very high Pb level over 150 mg/kg of the fine particle fractions from the soils of the inner city could be a cause of high blood Pb level reported of children from the city as acute exposure to Pb of fine particles of the urban soil might occur by soil ingestion and inhalation by young children. Thus, much attention should be paid to the partitioning of toxic metals in fine soil particles of the urban soils and countermeasures against high health risk of Pb exposure by soil ingestion and dust inhalation should be practiced against the health problem of blood Pb for young children from the cities.

Statistical analysis of distribution patterns of coal seams in fold zones in Northwest China

The mechanisms for rock bursts occurrences in fold zones are complex, and the redistribution of in-situ stresses is closely related to the complexity of the structures. Analysis of the geomorphology of fold structures and changes of coal thickness can help identify zones prone to rock bursts to improve safety and productivity in coal mines. This study investigated the distribution characteristics of fold structures in coal seams in fold zones in four mines in northwest China. Geometrical characteristics of fold structures in coal seams and changes of coal thickness were analysed, based on comprehensive evaluation indexes,such as the length–width ratio of folds, interlimb angle, ratio P1 of projected width of fold limbs to that of the hinge zone, curvature ratio P2, the maximum curvature and amplitude. The statistical analysis of the four coal mines shows that the length–width ratio of folds changed from 0.78 to 2.03 and the maximum curvature of cross sections of folds was less than 0.04. The curvature ratio of cross section of a fold in the structure was no more than 1.4 and the interlimb angles of cross sections of 89% of folds were larger than 150°. Gentle fold structures were dominant and the specific geological morphologies were domes or basins. The isopleth of coal thickness above the coal mines showed a fluctuation trend similar to the contour line of the floor of coal seams. The coal thickness in an anticline area was smaller than that in the neighboring syncline area. Therefore, the overall variation of coal thickness in the mining areas was likely to have a relation with the direction of the regional principal stress.

ZONALITY OF DISTRIBUTION OF PHYSICO-GEOGRAPHICAL ZONES IN CHINA

With the methods of regression analysis and trend surface analysis, taking the bottom and top lines of dark conifer forest, bottom line of permafrost and the snowline of the latest glaciation in China as examples, this paper discusses the zonality regulaties of the distribution of physico-geographical zones in China. (1) Latitude zonality obeys the mathematical model of normal frequency distribution, being approximate to descending straightly within the latitude of China. (2) Longitude zonality shows that the elevation of physico-geographical zone rises straightly with the distance to east coast. (3) The combination of latitude and longitude zonalities appears a plane inclining from SSW to NNE. The decline of physico-geographical zone resembles a semiellipse- sphere inclining from the Qinghai-Xizang (Tibet) Plateau to northeast China, reflecting the effect of relief. (5) Physico-geographical zonation depends on the combination of hydrothermal conditions. Thus the factors influencing the distribution

Characteristics of fault zones and their control on remaining oil distribution at the fault edge: a case study from the northern Xingshugang Anticline in the Daqing Oilfield, China

Most major oil zones in the Daqing Oilfield have reached a later,high water cut stage,but oil recovery is still only approximately 35%,and 50%of reserves remain to be recovered.The remaining oil is primarily distributed at the edge of faults,in poor sand bodies,and in insufficiently injected and produced areas.Therefore,the edge of faults is a major target for remaining oil enrichment and potential tapping.Based on the dynamic change of production from development wells determined by the injection-recovery relationship at the edge of faults,we analyzed the control of structural features of faults on remaining oil enrichment at the edge.Our results show that the macroscopic structural features and their geometric relationship with sand bodies controlled remaining oil enrichment zones like the edges of NNE-striking faults,the footwalls of antithetic faults,the hard linkage segments（two faults had linked together with each other to form a bigger through-going fault）,the tips of faults,and the oblique anticlines of soft linkages.Fault edges formed two types of forward microamplitude structures：（1） the tilted uplift of footwalls controlled by inverse fault sections and（2） the hanging-wall horizontal anticlines controlled by synthetic fault points.The remaining oil distribution was controlled by microamplitude structures.Consequently,such zones as the tilted uplift of the footwall of the NNW-striking antithetic faults with a fault throw larger than 40 m,the hard linkage segments,the tips of faults,and the oblique anticlines of soft linkage were favorable for tapping the remaining oil potential.Multi-target directional drilling was used for remaining oil development at fault edges.Reasonable fault spacing was determined on the basis of fault combinations and width of the shattered zone.Well core and log data revealed that the width of the shattered zone on the side of the fault core was less than 15 m in general;therefore,the distance from a fault to the development target should be larger than 15 m.Vertically segmented growth faults should take the separation of the lateral overlap of faults into account.Therefore,the safe distance of remaining oil well deployment at the fault edge should be larger than the sum of the width of shattered zone in faults and the separation of growth faults by vertical segmentation.

Regional hard coral distribution within geomorphic and reef flat ecological zones determined by satellite imagery of the Xisha Islands,South China Sea

Coral reefs in the Xisha Islands （also known as the Paracel Islands in English）, South China Sea, have experienced dramatic declines in coral cover. However, the current regional scale hard coral distribution of geomorphic and ecological zones, essential for reefs management in the context of global warming and ocean acidification, is not well documented. We analyzed data from field surveys, Landsat-8 and GF-1 images to map the distribution of hard coral within geomorphic zones and reef fiat ecological zones. In situ surveys conducted in June 2014 on nine reefs provided a complete picture of reef status with regard to live coral diversity, evenness of coral cover and reef health （live versus dead cover） for the Xisha Islands. Mean coral cover was 12.5% in 2014 and damaged reefs seemed to show signs of recovery. Coral cover in sheltered habitats such as lagoon patch reefs and biotic dense zones of reef flats was higher, but there were large regional differences and low diversity. In contrast, the more exposed reef slopes had high coral diversity, along with high and more equal distributions of coral cover. Mean hard coral cover of other zones was 〈10%. The total Xisha reef system was estimated to cover 1 060 km2, and the emergent reefs covered -787 km2. Hard corals of emergent reefs were considered to cover 97 km2. The biotic dense zone of the reef flat was a very common zone on all simple atolls, especially the broader northern reef flats. The total cover of live and dead coral can reach above 70% in this zone, showing an equilibrium between live and dead coral as opposed to coral and algae. This information regarding the spatial distribution of hard coral can support and inform the management of Xisha reef ecosystems.

Tectonic-lithofacies paleogeography,large-scale source-reservoir distribution and exploration zones of Cambrian subsalt formation,Tarim Basin,NW China

To predict the large-scale source rock and reservoir distribution in Cambrian subsalt formations(Upper Sinian to Mid-Cambrian)in the Tarim Basin,more than 502D seismic lines and 3D data volume acquired latest,22 wells and some out-crops around this area were used to study the tectonic-lithofacies paleogeography,define the distribution of large scale source rocks and reservoirs,and sort out favorable zones.(1)The basin experienced evolution from ramp to deep-water mud-rich ramp,low-gradient slope,weak rimmed to strong rimmed platform,and the differentiation in the platform was controlled by pre-Cambrian palaeo-rifts.(2)The Luonan-Yubei ancient rift controlled the distribution of source rocks in the Lower Cambrian Yuertusi Formation,and this rift together with the northern depression are the main source rock area.(3)There are three sets of large-scale reservoirs,the Upper Sinian Qigebulake Formation,the Lower Cambrian Xiaorbulake Formation and the Wu-songger Formation,and shoal-mounds,early dolomitization and multi-levels of unconformities controlled reservoir develop-ment.(4)Four favorable zones,the north slope of Tazhong,upper slope of Maigaiti area,Keping-Wensu periphery,and south slope of Tabei,were evaluated.Of them,the north slope of Tazhong is most likely to have exploration breakthrough;the south slope of Tabei is the best area for exploring the Upper Sinian large scale weathering crust dolomite;Maigaiti slope and Kep-ing-Wensu periphery area improved in exploration potentials significantly,and are worth prospecting faster.

PRESSURE DISTRIBUTION ON THE GRIP ZONES IN THE CONFORM PROCESS

The pressure distribution on the grip zones in the CONFORM process has been analysed by means of the slab method, and from the above results the forces applied to the shoe were derived. It is shown that the pressure along the segment increases powerfully with θ increasing in the primary grip, and increases linearly with θ increasing in the extrusion grip. Thus, it can offer mechanics parameters for the operating techniques and CONFORM machine design.

Species Distribution, Diversity, and Abundance of Sea Cucumbers in Tropical Intertidal Zones of Aurora, Philippines

The distribution, diversity, and abundance of sea cucumbers in intertidal zones of Aurora were studied from February to June 2013 to obtain baseline data. A one-hour timed-search survey covering an approximate one kilometer over a ten-meter wide area was conducted in six coastal municipalities to obtain a comprehensive list of sea cucumber species found in the zones. Only four sampling stations (Baler, Dipaculao, Dilasag, and Dingalan) were selected for belt transect survey, 50 × 50 m, based on the availability of coralline, sandy, muddy sand, and rocky habitats which were laid perpendicular and parallel to each intertidal zone. Timed-search survey revealed a total of 15 species of sea cucumbers distributed among two Orders (Order Aspidochirotida and Order Apodida) and four Families (Family Holothuriidae, Family Stichopodidae, Family Synaptidae, and Family Chirotidae) were recorded. Synapta maculata is most common and has widespread distribution. Belt-tranect surveys showed Holothuria leucospilota is among the most frequently occurring species both during day time (58%) and night time (75%). The Dilasag sampling station had the most diverse species (0.71) while the Dipaculao sampling station had the densest species of Holothuria leucospilota (10,014 in∙ha−1) and abundant (95.91%) species.

Assessment of the Relationship between ESR Signal Intensity and Grain Size Distribution in Shear Zones within the Atotsugawa Fault System, Central Japan

For the first time, a relationship between ESR signal intensity and grain size distribution (sieve technique) in shear zones within the Atotsugawa fault system have been investigated using fault core rocks. The grain size distributions were estimated using the sieve technique and microscopic observations. Stacks of sieves with openings that decrease consecutively in the order of 4.75 mm, 1.18 mm, 600 μm, 300 μm, 150 μm and 75 μm were chosen for this study. Grain size distributions analysis revealed that samples further from the slip plane have larger d50 (average gain size) (0.45 mm at a distance of 30 - 50 mm from the slip plane) while those close to the slip plane have smaller d50 values (0.19 mm at a distance of 0 - 10 mm from the slip plane). This is due to intensive crushing that is always associated with large displacement during fault activities. However, this pattern was not respected in all shear zones in that, larger d50 values were instead observed in samples close to the slip plane due to admixture of fault rocks from different fault activities. Results from ESR analysis revealed that the relatively finer samples close to the slip plane have low ESR signals intensity while those further away (coarser) have relatively higher signal intensity. This tendency however, is not consistence in some of the shear zones due to a complex network of anatomizing faults. The variation in grain size distribution within some of the shear zones implies that, a series of fault events have taken place in the past thus underscoring the need for further investigation of the possibility of reoccurrence of faults.