The abundance,distribution,and enrichment mechanism of harmful trace elements in coals from Guizhou,Southwestern China

Coal seams can enrich a variety of harmful trace elements under specific geological conditions.The spatial distribution of harmful trace elements in coal is extremely uneven,and the distribution characteristics of each element content are different.The harmful elements released in the process of coal mining and utilization will cause serious harm to the environment and the human body.It is of great resource significance to study the geochemistry of coal that affects the enrichment and distribution characteristics of harmful trace elements.Based on the domestic and foreign literature on coal geochemistry in Guizhou published by previous investigators,this study counted 1097 sample data from 23 major coal-producing counties in Guizhou Province,systematically summarized the relevant research results of harmful trace elements in the coal of Guizhou,and revealed the overall distribution and enrichment characteristics of harmful trace elements in the coal of Guizhou.The results show that the average contents of Cd,Pb,Se,Cu,Mo,U,V,As,Hg,and Cr in coal of Guizhou are higher than those in Chinese coal and world coal.A variety of harmful trace elements in the coal of Guizhou have high background values,especially in Liupanshui,Xingyi and Qianbei coalfield.The enrichment of various harmful trace elements in the Late Permian coal in Guizhou is mainly related to the combined action of various geological and geochemical factors.The supply of terrigenous debris and sedimentary environment may be the basic background of the enrichment of harmful elements in western Guizhou,while low-temperature hydrothermal activity and volcanic ash deposition may be the main reasons for the enrichment of harmful elements in southwestern Guizhou.

Preliminary Study of Chemical Elements Distribution in Petroleum Source Rocks Donga and Yogou Formations of the Termit Sedimentary Basin (Est-Niger)

XRF and EDX analyses were carried out on 18 batches of representative raw samples to determine the distribution of major chemical elements in the petroleum source rocks of Donga and Yogou formations of Termit sedimentary basin. The chemical composition of these formations is dominated by silicon (Si), aluminum (Al) and iron (Fe). This is consistent with the oxide composition, which is also dominated by silicon oxide (SiO2), aluminum oxide (Al2O3) and iron monoxide (FeO). No less important chemical elements are calcium (Ca), potassium (K), sulfur (S), titanium (Ti), magnesium (Mg), manganese (Mn) and barium (Ba), as well as some of their oxides. All these major chemical elements are carried by silicate detrital minerals associated with pyrite and goethite and/or clay minerals such as kaolinite and interstratified illite, smectite and chlorite. This trend is illustrated by the values of the Si/Al and SiO2/Al2O3 ratios.

A Study of the Distribution and Accumulation of Major Nutrient Elements in Different Densities of Eucalyptus grandis

This study was conducted to investigate the distribution and accumulation of major elements of 5-year-old Eucalyptus grandis forests with the densities of 556 trees/hm2 and 1 667 trees/hm2. The results showed that： （1） The distribution of ma- jor nutrient element contents in various organs of the E. grandis with the 2 densi- ties was nearly the same, and the ranked order was leaf〉tree trunk〉branch or branchlet〉fruit〉bark. （2） From the distribution of nutrient elements and organic mat- ter in the trunk, P, K, Mg and Ca contents presented basically a trend of increasing with the trunk height increasing. And the organic matter content increased with the trunk height increasing in the low density stand, while the result was opposite in the high density stand. Furthermore, N content increased with the trunk height increas- ing in the low density stand, but the content in the high density stand exhibited a trend of decreasing at first, increasing then and increasing at the last. （3） From the distribution of biomass, the ranked order was tree trunk〉bark or branch〉branchlet〉 leaf〉fruit. And （4） The accumulated amounts of major nutrient elements in various organs under the 2 stand densities was nearly same. Ca content was the highest in the 2 kinds of plantations, followed by N, K, Mg and P contents. Ca content was 601.78 kg/hm2 in the low density stand and 1 204. 43 kg/hm2 in the high density stand.

Distribution behavior of valuable elements in oxygen-enriched top-blown smelting process of waste printed circuit boards

Oxygen-enriched top-blown smelting is a promising technology for processing waste printed circuit boards(WPCBs).The distribution behavior of valuable elements in WPCBs during smelting was investigated by varying the oxygen-enriched concentration,oxygen volume,CaO/SiO_(2)(mass ratio),and Fe/SiO_(2)(mass ratio).The optimal operating conditions were obtained by implementing a one-factor-at-a-time method.X-ray diffractometer,scanning electron microscopy−energy dispersive spectrometer,and inductive coupled plasma-atomic emission spectroscopy methods were utilized to detect the chemical composition,occurrence state as well as elemental contents of alloy and slag.It is found that the elements of Cu,Sn and Ni are mainly accumulated in the alloy while Fe is mainly oxidized into the slag.The direct yields of Cu,Sn and Ni are 90.18%,85.32%and 81.10%under the optimal conditions of temperature 1250℃,oxygen-enriched concentration 30%,oxygen volume 24 L,CaO/SiO_(2) mass ratio 0.55,and Fe/SiO_(2) mass ratio 1.05.The results show that the valuable metals are mainly lost in the slag through mechanical entrainment.

The spatial distribution of major and trace elements of surface sediments in the northeastern Beibu Gulf of the South China Sea

A multi-index analysis including grain size, major and trace elements is performed on the surface sediments from the northeastern Beibu Gulf to trace the sources of the sediments and to understand the controlling factors for elements distribution. The mean grain size exhibits a wide variation ranging from 0.09Φ to 8.05Φ with an average value of 5.33Φ. The average contents of major elements descend in an order of c(SiO_2)>c(Al_2O_3)>c(Fe_2O_3)>c(CaO)>c(MgO)>c(K_2O)>c(Na_2O)>c(TiO_2)>c(P_2O_5)>c(MnO), while those of trace elements exhibit a descending order of c(Sr)>c(Rb)>c(V)>c(Zn)>c(Cr)>c(Pb)>c(Ni)>c(Cu)>c(As). On the basis of elementary distribution characteristics and statistical analyses, the study area is divided into the four zones: Zone I is located in the northeastern coastal area of the gulf, which receives large amount of fluvial materials from local rivers in Guangxi and Guangdong, China, and the Qiongzhou Strait; Zone Ⅱ is located in the center of the study area, where surface sediments exhibits a multiple source; Zone Ⅲ is located in the Qiongzhou Strait, where surface sediments are dominated by materials from the Zhujiang River and Hainan; Zone IV is located in the southwest of the study area, where surface sediments are mainly originated from the Red River and Hainan. The statistical analyses of sediment geochemical characteristics reveal that the grain size, which is mainly influenced by hydrodynamics and mineral composition of terrigenous materials, is the leading factor controlling the elementary distribution.Meanwhile, impacts from anthropogenic activities and marine biogenic process will also be taken into consideration.

Distribution Characteristics of Sulfur and the Main Harmful Trace Elements in China's Coal

To promote the rational development and use of clean coal resources in China, data on the regional and age distribution of sulfur, arsenic and other harmful elements in Chinese coal was broadly collected, tested for content, and analyzed. Coal in northwestern China is characterized by low to extremely low levels of sulfur; the coal of the Taiyuan Formation in northern China mainly has high-sulfur content; that of the Shanxi Formation is mainly characterized by low sulfur coal; and the Late Permian coal in southern China has overall higher sulfur content; other regions have low sulfur coal. The average content of harmful trace elements in the bulk of China＇s coal is similar to the corresponding content in the coal of the North America and the rest of the world, whereas the content of various elements （Hg, Sb and Se） is different in magnitude to the corresponding percentage in the crust. The average content of the elements Cr, Se, Co, Be, U, Br in Late Permian coal in S China ranks first in the country whereas the average content of Hg and CI in the coals of Late Carboniferous to Early Permian age in N China are the highest. The average content of Mn in Early and Middle Jurassic coal is higher in NW China. The high content of harmful elements in some coal should cause particular concern both in the development and utilization of coal.

DISTRIBUTIONS OF CHEMICAL ELEMENTS WITH RELATION TO MAJOR WATER CIRCULATIONS IN THE CENTRAL AND NORTHERN PARTS OF THE TAIWAN STRAIT

Data obtained from a comprehensive multidisciplinary oceanographic survey in the central and northern parts of the Taiwan Strait, 24°20′-26°00′N, 118°45°-121°00′E by the Fujian Institute of Oceanology during the period May, 1983 through May, 1984, showed that the distributions of dissolved oxygen (DO), nitrate, dissolved inorganic phosphate and silicate concentrations here had obvious areal and seasonal characteristics that were mainly influenced by the seasonal circulation ofthree major water systems in the Taiwan Strait-- the Taiwan Strait Warm Water (TSWW), theZhejiang-Fujian Coastal Water (ZFCW), and the Northeastern Strait Warm Water (NESWW).

Effects of Long-Term Use of Flavonoids on the Absorption and Tissue Distribution of Orally Administered Doses of Trace Elements in Rats

The risk of pharmacokinetic polyphenols-trace elements interaction may undesirable therapeutic outcomes. We evaluate the long-term use of silibinin, epigallocatechin (ECGC), quercetin and rutin on the absorption and tissue distribution of zinc, copper and iron after single oral doses in rats. Five groups of rats were either with olive oil as control or with one of the polyphenols silibinin, EPGC, quercetin or rutin, administered orally as oily solutions for 30 days. At day 30, a solution contains sulphate salt of zinc, copper and iron was administered orally;3 hrs later blood samples, tissues of brain, kidney and liver were obtained for evaluation of the elements levels. The results showed that the polyphenols increased both serum and tissue levels of these elements compared with controls. This effect was relatively varied according to the structural differences among flavonoids. In conclusion, long-term use of supraphysiological doses of flavonoids increase absorption of Zn, Cu and Fe and their tissue availability in brain, kidney and liver;this effect seems to be different with variations in structural features.

Factors Controlling the Distribution of Transitional Metal Elements in Marine Hydrogenic Ferromanganese Crusts

A series of selective dissolution experunents were conducted on the hydrogeinc ferromanganese crusts collected near Line Island to study the geochemistry of Mn, Fe, Cu, Co, Ni and Ti. Despite of the fact that the very close intergrowth between amorphous ferric oxyhydroxides and 6-MnO2 exists in the hydrogenic ferromanganese crusts, there is no isomorphous substitution between iron and manganese. This is because the two elements in oxides have different crystal chemistry and geochemistry, such assertion bemg in agreement with the results of selective dissolution experiments. Transitional metal elements such as Cu, Co, Ni and Ti are enriched in different phases, i.e. Ni and Co are incorporated into 6-MnO2 while Cu and Ti are incorporated into ferric oxyhy- droxides. The distributions of the elements in amorphous ferric oxyhydroxides and δ-MnO2 are controlled by the existing states of the elements in the seawater and the crystal chemistry and geochemistry of these elements/inns in oxides.

CONTENT AND DISTRIBUTION OF TRACE ELEMENTS IN SOILS OF THE DAM RIVER AND TUOTUO RIVER BASINS

Natural contents and distribution of trace elements in soils of the Dam River and Tuotuo River basins are demonstrated in this paper. By using contrasting methods. it is found that the content of trace elements of soil in the region is at the lower limit of the world's soil content level, that the tendency of the average trace element content in the four main types of soil is shown as: alpine mountain meadow soil>marsh soil>alpine mountain steppe soil> alpine mountain cryogenic soil. the average content of trace elements such as Cr. Co, Zn, Cu, Hg, Pb, Mo, Mn and Ni in the Dam River basin is higher than that of the Tuotuo River basin except that of the elements Ba and Sr. In addition. through correlation analysis. the relationship of intergrowth and association among soil elements are revealed.

The construction of general basis functions in reweighting ensemble dynamics simulations: Reproduce equilibrium distribution in complex systems from multiple short simulation trajectories

Ensemble simulations, which use multiple short independent trajectories from dispersive initial conformations, rather than a single long trajectory as used in traditional simulations, are expected to sample complex systems such as biomolecules much more efficiently. The re-weighted ensemble dynamics（RED） is designed to combine these short trajectories to reconstruct the global equilibrium distribution. In the RED, a number of conformational functions, named as basis functions,are applied to relate these trajectories to each other, then a detailed-balance-based linear equation is built, whose solution provides the weights of these trajectories in equilibrium distribution. Thus, the sufficient and efficient selection of basis functions is critical to the practical application of RED. Here, we review and present a few possible ways to generally construct basis functions for applying the RED in complex molecular systems. Especially, for systems with less priori knowledge, we could generally use the root mean squared deviation（RMSD） among conformations to split the whole conformational space into a set of cells, then use the RMSD-based-cell functions as basis functions. We demonstrate the application of the RED in typical systems, including a two-dimensional toy model, the lattice Potts model, and a short peptide system. The results indicate that the RED with the constructions of basis functions not only more efficiently sample the complex systems, but also provide a general way to understand the metastable structure of conformational space.

Review Study on the Accumulation and Release of Trace Metal Elements on Aluminum Containing Sediments in Drinking Water Distribution System

Accumulation and releasing of trace metal elements on aluminum containing sediments of inner drinking water pipe is discussed,as studied from five variations effecting:raw water quality,chemical reagents,solution pH and drinking water flow condition.In order to decrease the release of trace metal elements,and to ensure the pipe operation and human safety,water quality adjustment is suggested to avoid aluminum containing sediments formation in drinking distribution system.The maximum amounts of accumulation of common trace metal elements are given.Future trends of development in this field are also proposed.

Wavy Distribution of Trace Elements in Phytolacca Samples from Different Areas

To study the distribution of 25 elements, i.e. Be, Cd, Ce, Cr, Cu, Dy, Er,Eu, Gd, Ge, Ho, La, Lu, Mo, Nd, Pb, Pr, Sm, Sr, Tb, Tl, Tm, Y, Yb and Zn in Phytolacca, atraditional Chinese medicinal herb, collected from nine areas of P. R. China. Methods Twenty-fiveelements in Phytolacca including essential elements, toxic elements and rare earth elements intraditional Chinese medicinal herbs from different areas were analyzed by ICP-MS. Results The 25elements in Phytolacca were determined by ICP-MS under optimized conditions. The detection limitswere 0.003 -0.71 ng·mL^(-1). The recoveries were 88% - 118% . The relative standard deviations ofthe measurements were 1.7% - 13.3%. Conclusion The determined concentrations of elements inPhytolacca acinosa Roxb vary from one area to another; however, the distribution tendency ofelements in all the samples is similar. The distribution tendency of rare earth elements inPhytolacca acinosa Roxb is consistent with that in nature.

Influence of canopy on precipitation and its nutrient elements in broadleaved/Korean pine forest on the northern slope of Changbai Mountain

The precipitation distribution quantity of canopy in broadleaved/Korean pine forest was measured during the growing season (Jun.–Sept.) in 2001 in the Changbai Mountain, Jilin Province, P. R. China. Results indicated that the amounts of stemflow, throughfall, and interception were 37.39, 322.12 and 109.69 mm, accounting for 7.97%, 68.65% and 23.38% of the total rainfall, respectively. The rate of stemflow was higher in Jul. and Aug. than other months. The rate of throughfall dropped off from Jun. to Sept., however, rate of interception changed contrarily from 19.43% to 31.02% during the growing season. According to our analysis, the concentration of nutrient elements were arranged as Ca>Mg>N>K>Fe>P>Cu>Mn for rainfall, K>N>Mg>Ca>P>Fe>Mn>Cu for throughfall, and Mn>P>K>Cu>Fe>N>Mg>Ca for being leached through canopy. Nutrients concentration in stewflow and throughfall changed significantly when rainfall passed canopy, and concentration of all elements increased except for Ca and Mg.

Effects of heating temperature and atmosphere on element distribution and microstructure in high-Mn/Al austenitic low-density steel

The elemental distribution and microstructure near the surface of high-Mn/Al austenitic low-density steel were investigated after isothermal holding at temperatures of 900-1200℃ in different atmospheres,including air,N_(2),and N_(2)+CO_(2).No ferrite was formed near the surface of the experimental steel during isothermal holding at 900 and 1000℃ in air,while ferrite was formed near the steel sur-face at holding temperatures of 1100 and 1200℃.The ferrite fraction was larger at 1200℃ because more C and Mn diffused to the sur-face,exuded from the steel,and then reacted with N and O to form oxidation products.The thickness of the compound scale increased owing to the higher diffusion rate at higher temperatures.In addition,after isothermal holding at 1100℃ in N_(2),the Al content near the surface slightly decreased,while the C and Mn contents did not change.Therefore,no ferrite was formed near the surface.However,the near-surface C and Al contents decreased after holding at 1100℃in the N_(2)+CO_(2)mixed atmosphere,resulting in the formation of a small amount of ferrite.The compound scale was thickest in N_(2),followed by the N_(2)+CO_(2)mixed atmosphere,and thinnest in air.Overall,the element loss and ferrite fraction were largest after holding in air at the same temperature.The differences in element loss and ferrite frac-tion between in N_(2) and N_(2)+CO_(2)atmospheres were small,but the compound scale formed in N_(2) was significantly thicker.According to these results,N_(2)+CO_(2)is the ideal heating atmosphere for the industrial production of high-Mn/Al austenitic low-density steel.

Structure characterization of the oxide film on FGH96 superalloy powders with various oxidation degrees

The structure of the oxide film on FGH96 alloy powders significantly influences the mechanical properties of superalloys.In this study,FGH96 alloy powders with various oxygen contents were investigated using high-resolution transmission electron microscopy and atomic probe technology to elucidate the structure evolution of the oxide film.Energy dispersive spectrometer analysis revealed the presence of two distinct components in the oxide film of the alloy powders:amorphous oxide layer covering the γ matrix and amorphous oxide particles above the carbide.The alloying elements within the oxide layer showed a laminated distribution,with Ni,Co,Cr,and Al/Ti,which was attributed to the decreasing oxygen equilibrium pressure as oxygen diffused from the surface into the γ matrix.On the other hand,Ti enrichment was observed in the oxide particles caused by the oxidation and decomposition of the carbide phase.Comparative analysis of the oxide film with oxygen contents of 140,280,and 340 ppm showed similar element distributions,while the thickness of the oxide film varies approximately at 9,14,and 30 nm,respectively.These findings provide valuable insights into the structural analysis of the oxide film on FGH96 alloy powders.

Vision-based Dynamics Monitoring(VDM)for Diagnosing the Variations of Wind Turbine Tower Foundation Conditions

A slight uneven settlement of the foundation may cause the wind turbine to shake,tilt,or even collapse,so it is increasingly necessary to realize remote condition monitoring of the foundations.At present,the wind turbine foundation monitoring system is incomplete.The current monitoring research of the tower foundation is mainly of contact measurements,using acceleration sensors and static-level sensors for monitoring multiple reference points.Such monitoring methods will face some disadvantages,such as the complexity of monitoring deployment,the cost of manpower,and the load effect on the tower structure.To solve above issues,this paper aims to investigate wind turbine tower foundation variation dynamic monitoring based on machine vision.Machine vision monitoring is a kind of noncontact measurement,which helps to realize comprehensive diagnosis of early foundation uneven settlement and loose faults.The FEA model is firstly investigated as the theoretical foundation to investigate the dynamics of the tower foundation.Second,the Gaussian-based vibration detection is adopted by tracking the tower edge points.Finally,a tower structure with distributed foundation support is tested.The modal parameters obtained from the visual measurement are compared with those from the accelerometer,proving the vision method can effectively monitor the issues with tower foundation changes.

Spatial distribution and environmental characterization of sediment-associated metals from middle-downstream of Xiangjiang River,southern China

The contamination and environmental risk assessment of the toxic elements in sediments from the middle-downstream (Zhuzhou-Changsha section) of the Xiangjiang River in Hunan Province of China were studied. The results show that As, Cd, Pb and Zn are major contaminants in sediments, and average concentrations of these elements significantly exceed both the Control Standards for Pollutants in Sludge of China (GB4284-84) for agricultural use in acidic soils and the effect range median (ERM) values. The average concentrations of As, Cd and Pb in the river water slightly exceed the limit of Surface Water Environment Quality Standard (GB3838-2002). The concentrations of As and Cr in depth profiles extensively change, but slight changes are observed in Pb and Zn. Cd and Zn in most sediment samples can easily enter the food-chain and bring possible ecotoxicological risk to organisms living in sediments according to the risk assessment code.

Thermal residual stresses and stress distributions under tensile and compressive loadings of short fiber reinforced metal matrix composites

The thermal residual stresses and the stress distributions of short fiber reinforced metal matrix composite under tensile and compressive loadings were studied using large strain axisymmetric elasto plastic finite element method. It is demonstrated that the thermal residual stresses can result in asymmetrical stress distributions and matrix plasticity. The thermal residual stresses decrease the stress transfer in tension and enhance the stress transfer in compression. The fiber volume fraction has more important effects on the thermal residual stresses and the stress distributions under tensile and compressive loadings than the fiber aspect ratio and the fiber end distance. [

Finite Element Analysis of the Temperature Distribution in Orthogonal Metal Machining

Aim To Research the temperature distribution in orthogonal metal machining and to build a finite element analysis model about the temperature distribution. Methods With the finite element method of thermal conduction, the temperature distributions in various machining conditions were computed according to the experimental data such as cutting force, shear angle, etc. Results The computational results agree with some classic experimental results, and thermal effect due to process parameters was observed. Conclusion The finite element analysis model is reasonable, and it's a feasible scheme for studying the temperature distribution in orthogonal metal machining system.