Based on the seismic observation report data provided by the Xinjiang Digital Seismic Network from 2009 to 2014,we calculate the wave velocity ratio and its background value for medium and small earthquakes by using t...Based on the seismic observation report data provided by the Xinjiang Digital Seismic Network from 2009 to 2014,we calculate the wave velocity ratio and its background value for medium and small earthquakes by using the multi-station method in Tianshan,Xinjiang.This paper analyzes the variation of the wave velocity ratio disturbance value to highlight the abnormal,and also back-traces 7 moderate earthquakes at the research area.The results show that:(1)the background value of the wave velocity ratio is almost 1.70,the wave velocity ratio obviously decreases in the middle-eastern part of Tianshan and the region near the Puchang fault;(2)the wave velocity ratio disturbance value is mostly low in the epicenter before four earthquakes of M≥5.0 from 2011 to 2013 in the study area;(3)before 7 moderate strong earthquakes,the earthquake events with low value of the wave velocity ratio account for over 60% of corresponding total events near the epicenters,and the low value of the wave velocity ratio is relatively obvious before moderate earthquakes.展开更多
Taking the test stopes during continuous mining induced roof caving of Tongkeng ore-body No.92 as example, the calculation flow of unloading analysis was established. According to the unloading region division method ...Taking the test stopes during continuous mining induced roof caving of Tongkeng ore-body No.92 as example, the calculation flow of unloading analysis was established. According to the unloading region division method of the affected zone theory, and the deterioration laws of mechanics parameters of unloading rock mass, the continuous mining process in underground mine was analyzed by the software MIDAS/GTS, the mechanical response of roof rock mass unloading was studied, and the differences were analyzed with the conventional simulation. The result shows that the maximum tensile stress, subsidence displacement and equivalent plastic strain of roof rock mass are 1.5 MPa, 20 cm and 1.5% in the unloading analysis, while 1.0 MPa, 13 cm and 0.9% in the conventional analysis. The values of unloading analysis, which are also closer to the actual situation, are greater than those of conventional analysis; the maximum step in continuous mining is 48 m, which shows that the induced treatment of the roof should be carried out after 2 mining steps展开更多
基金funded by the Earthquake Science Fund of Xinjiang (201404)Seismic Tracing Oriented Task of China Earthquake Administration(2015010122)
文摘Based on the seismic observation report data provided by the Xinjiang Digital Seismic Network from 2009 to 2014,we calculate the wave velocity ratio and its background value for medium and small earthquakes by using the multi-station method in Tianshan,Xinjiang.This paper analyzes the variation of the wave velocity ratio disturbance value to highlight the abnormal,and also back-traces 7 moderate earthquakes at the research area.The results show that:(1)the background value of the wave velocity ratio is almost 1.70,the wave velocity ratio obviously decreases in the middle-eastern part of Tianshan and the region near the Puchang fault;(2)the wave velocity ratio disturbance value is mostly low in the epicenter before four earthquakes of M≥5.0 from 2011 to 2013 in the study area;(3)before 7 moderate strong earthquakes,the earthquake events with low value of the wave velocity ratio account for over 60% of corresponding total events near the epicenters,and the low value of the wave velocity ratio is relatively obvious before moderate earthquakes.
基金Projects (50934006, 51074178) supported by the National Natural Science Foundation of ChinaProject (2010QZZD001) supported by the Fundamental Research Funds for the Central Universities of China
文摘Taking the test stopes during continuous mining induced roof caving of Tongkeng ore-body No.92 as example, the calculation flow of unloading analysis was established. According to the unloading region division method of the affected zone theory, and the deterioration laws of mechanics parameters of unloading rock mass, the continuous mining process in underground mine was analyzed by the software MIDAS/GTS, the mechanical response of roof rock mass unloading was studied, and the differences were analyzed with the conventional simulation. The result shows that the maximum tensile stress, subsidence displacement and equivalent plastic strain of roof rock mass are 1.5 MPa, 20 cm and 1.5% in the unloading analysis, while 1.0 MPa, 13 cm and 0.9% in the conventional analysis. The values of unloading analysis, which are also closer to the actual situation, are greater than those of conventional analysis; the maximum step in continuous mining is 48 m, which shows that the induced treatment of the roof should be carried out after 2 mining steps
