This article investigates the performances of different extractive distillation processes intensified with dividing-wall column for separating benzene-isopropanol-water ternary mixtures.All the processes with ethylene...This article investigates the performances of different extractive distillation processes intensified with dividing-wall column for separating benzene-isopropanol-water ternary mixtures.All the processes with ethylene glycol as solvent are optimized with the minimal total annual cost(TAC)as target.In order to get the global optimal solution intelligently,an improved simulated annealing algorithm is adopted,which is programmed in MATLAB and linked to Aspen Plus.The results show that the extractive dividing wall column-solvent(EDWC-S)process consisting of an extractive dividing wall column and a solvent recovery column is the best scheme.It can reduce the TAC by 28.65%and CO_(2) emissions by 32.84% compared to the conventional triple-column extractive distillation process.展开更多
Dividing wall column(DWC)is shown to be energy efficient compared to conventional column sequence for multi components separation,which is used for olefin separation in fluidization methanol to propylene process in th...Dividing wall column(DWC)is shown to be energy efficient compared to conventional column sequence for multi components separation,which is used for olefin separation in fluidization methanol to propylene process in the present work.Detailed design for pilot DWC was performed and five control structures,i.e.composition control(CC),temperature control(TC),composition-temperature control(CC-TC),temperature difference control(TDC),double temperature difference control(DTDC)were proposed to circumvent feed disturbance.Sensitivity analysis and singular value decomposition(SVD)were used as criterion to select the controlled temperature locations in TC,CC-TC,TDC and DTDC control loops.The steady simulation result demonstrates that 25.7% and 30.2% duty can be saved for condenser and reboiler by substituting conventional column sequence with DWC,respectively.As for control structure selection,TC and TDC perform better than other three control schemes with smaller maximum deviation and shorter settling time.展开更多
For separating some specific four component mixtures into four products, the four-product dividing wall column(FPDWC) with two partition walls can provide the same utility consumption with the extended Petlyuk configu...For separating some specific four component mixtures into four products, the four-product dividing wall column(FPDWC) with two partition walls can provide the same utility consumption with the extended Petlyuk configuration, although with structure simplicity. However, the reluctance to implement this kind of four product dividing wall column industrially also consists in the two uncontrollable vapor splits associated with it. The vapor split ratios are set at the design stage and might not be the optimal value for changed feed composition, thus minimum energy consumption could not be ensured. In the present work, a sequential iterative optimization approach was initially employed to determine the parameters of cost-effective FPDWC. Then the effect of maintaining the vapor split ratios at their nominal value on the energy penalty was investigated for the FPDWC with two partition walls, in case of feed composition disturbance. The result shows that no more than + 2% above the optimal energy requirements could be ensured for 20% feed composition disturbances, which is encouraging for industrial implementation.展开更多
Azeotropic distillation is a special distillation method for separating liquid mixtures, which has better distillation effect and obvious advantages of energy saving and consumption reduction compared with traditional...Azeotropic distillation is a special distillation method for separating liquid mixtures, which has better distillation effect and obvious advantages of energy saving and consumption reduction compared with traditional distillation. In this paper, the latest research progress of azeotropic distillation technology in separation, synthesis and energy saving at home and abroad is reviewed. The research progress in separation is reflected in product separation and product purification, and the research progress in energy saving is reflected in heat pump distillation and dividing wall column distillation respectively. Existing studies have shown that azeotropic distillation technology can produce higher purity target products than conventional distillation for the separation and purification of azeotropic or near-boiling compounds. Heat pump distillation and dividing wall column distillation are used in azeotropic distillation field, resulting in obvious energy-saving effect for distillation equipment. The follow-up research direction of new separation technology with the goal of reducing energy consumption and exploring new materials as entraining agents should be studied in detail, which provides certain guidance for the development of distillation technology in China’s chemical industry.展开更多
基金This work was supported by the National Natural Science Foundation of China (21878178).
文摘This article investigates the performances of different extractive distillation processes intensified with dividing-wall column for separating benzene-isopropanol-water ternary mixtures.All the processes with ethylene glycol as solvent are optimized with the minimal total annual cost(TAC)as target.In order to get the global optimal solution intelligently,an improved simulated annealing algorithm is adopted,which is programmed in MATLAB and linked to Aspen Plus.The results show that the extractive dividing wall column-solvent(EDWC-S)process consisting of an extractive dividing wall column and a solvent recovery column is the best scheme.It can reduce the TAC by 28.65%and CO_(2) emissions by 32.84% compared to the conventional triple-column extractive distillation process.
基金Supported by Open Research Project of State Key Laboratory of Chemical Engineering(Grant No.SKL-Ch E-16B06)
文摘Dividing wall column(DWC)is shown to be energy efficient compared to conventional column sequence for multi components separation,which is used for olefin separation in fluidization methanol to propylene process in the present work.Detailed design for pilot DWC was performed and five control structures,i.e.composition control(CC),temperature control(TC),composition-temperature control(CC-TC),temperature difference control(TDC),double temperature difference control(DTDC)were proposed to circumvent feed disturbance.Sensitivity analysis and singular value decomposition(SVD)were used as criterion to select the controlled temperature locations in TC,CC-TC,TDC and DTDC control loops.The steady simulation result demonstrates that 25.7% and 30.2% duty can be saved for condenser and reboiler by substituting conventional column sequence with DWC,respectively.As for control structure selection,TC and TDC perform better than other three control schemes with smaller maximum deviation and shorter settling time.
基金Supported by Open Research Project of State Key Laboratory of Chemical Engineering(SKL-ChE-16B06)Yangtze Scholars and Innovative Research Team in Chinese University(IRT-17R81)
文摘For separating some specific four component mixtures into four products, the four-product dividing wall column(FPDWC) with two partition walls can provide the same utility consumption with the extended Petlyuk configuration, although with structure simplicity. However, the reluctance to implement this kind of four product dividing wall column industrially also consists in the two uncontrollable vapor splits associated with it. The vapor split ratios are set at the design stage and might not be the optimal value for changed feed composition, thus minimum energy consumption could not be ensured. In the present work, a sequential iterative optimization approach was initially employed to determine the parameters of cost-effective FPDWC. Then the effect of maintaining the vapor split ratios at their nominal value on the energy penalty was investigated for the FPDWC with two partition walls, in case of feed composition disturbance. The result shows that no more than + 2% above the optimal energy requirements could be ensured for 20% feed composition disturbances, which is encouraging for industrial implementation.
文摘Azeotropic distillation is a special distillation method for separating liquid mixtures, which has better distillation effect and obvious advantages of energy saving and consumption reduction compared with traditional distillation. In this paper, the latest research progress of azeotropic distillation technology in separation, synthesis and energy saving at home and abroad is reviewed. The research progress in separation is reflected in product separation and product purification, and the research progress in energy saving is reflected in heat pump distillation and dividing wall column distillation respectively. Existing studies have shown that azeotropic distillation technology can produce higher purity target products than conventional distillation for the separation and purification of azeotropic or near-boiling compounds. Heat pump distillation and dividing wall column distillation are used in azeotropic distillation field, resulting in obvious energy-saving effect for distillation equipment. The follow-up research direction of new separation technology with the goal of reducing energy consumption and exploring new materials as entraining agents should be studied in detail, which provides certain guidance for the development of distillation technology in China’s chemical industry.
