Boron separation by adsorption and flotation with Mg-Al-LDHs and SDBS from aqueous solution

Layered double hydroxides(LDHs)have been shown to be effective adsorbents for boron.However,solid-liquid separation is still a problem when separating boron from industrial radioactive waste liquid.In this research,three types of Mg-Al-LDHs including Mg-Al-LDH(NO_(3)^(-)),Mg-Al-LDH(Cl^(-))and Mg-Al-LDH(SO_(4)^(2-))were applied to adsorb boron,and moreover sodium dodecylbenzenesulfonate(SDBS)was used to float the LDH particles from aqueous solution after boron adsorption.The results showed that 60 min was sufficient for the equilibrium adsorption of the three LDHs.The boron adsorption capacity of three LDHs was determined as follows:Mg-Al-LDH(NO_(3)^(-))>Mg-Al-LDH(Cl^(-))>Mg-Al-LDH(SO_(4)^(2-)),and was 2.0,0.98 and 0.2 mmol·g^(-1),each ranging from 0 to 80 mmol·L^(-1)with the initial boron concentration.The efficiency of boron removal by Mg-Al-LDH(NO_(3)^(-))and SDBS can reach up to 89.7%.Furthermore,the boron flotation mechanism of SDBS and LDHs has been studied,since SDBS as a flotation agent can react with LDHs and penetrate into the interlayer of LDHs in addition to electrostatic attraction.Therefore,LDHs in solution can be floated onto the foam layer to be separated from the solution,and the clarified solution was obtained.The method is simple and promising for boron removal from aqueous solution.

A Facile Synthesis of ZnCo2O4 Nanocluster Particles and the Performance as Anode Materials for Lithium Ion Batteries

ZnCo_2O_4 nanocluster particles(NCPs) were prepared through a designed hydrothermal method, with the assistance of a surfactant, sodium dodecyl benzene sulfonate. The crystalline structure and surface morphology of ZnCo_2O_4 were investigated by XRD, XPS, SEM, TEM, and BET analyses. The results of SEM and TEM suggest a clear nanocluster particle structure of cubic ZnCo_2O_4(*100 nm in diameter), which consists of aggregated primary nanoparticles(*10 nm in diameter), is achieved. The electrochemical behavior of synthesized ZnCo_2O_4 NCPs was investigated by galvanostatic discharge/charge measurements and cyclic voltammetry. The ZnCo_2O_4 NCPs exhibit a high reversible capacity of 700 mAh g^(-1) over 100 cycles under a current density of 100 mA g^(-1) with an excellent coulombic efficiency of 98.9% and a considerable cycling stability. This work demonstrates a facile technique designed to synthesize ZnCo_2O_4 NCPs which show great potential as anode materials for lithium ion batteries.

Dispersion performance of nanoparticles in water

Engineering Nanoparticles(ENPs)’superior characteristics of adsorption depends on their dispersion in the medium.In this study,multi-walled carbon nanotubes(nonmetal),iron nanoparticles and silver nanoparticles(metallic simple substance),and Nano-TiO2,Nano-Fe2O3 and Nano-ZnO(metal oxide)were selected and respectively added into pure water and aqueous solution with 1%Sodium dodecyl benzene sulfonate(SDBS)surfactant.The dispersion effects were compared by leaving the solutions standing at room temperature under ultrasound.The results show that the dispersion of iron nanoparticles is the lowestamong the six ENPs,and that of multi-walled carbon nanotubes(MWCTS)is the highest.Adding anionic surfactants(SDBS)can obviously improve the dispersion performance of ENPs.The concentration of solution decreases by only 5%in 10 daysafter adding 1%SDBS for ultrasonic dispersion.