Erbium-doped holey fiber with hexagonal lattice was modeled by using effective index method. In order to calculate the equivalent step index of the periodic structure of the cladding holey optical fiber, all-vectorial...Erbium-doped holey fiber with hexagonal lattice was modeled by using effective index method. In order to calculate the equivalent step index of the periodic structure of the cladding holey optical fiber, all-vectorial fundamental space filling mode approach was utilized. By using EHll mode, we have numerically solved the rate equations of a three-level pumping scheme for a fiber laser. The obtained results have shown a good agreement with the other experimental results, recently. The results have predicted amplifiers with gain efficiencies as high as 10 dB/mW.展开更多
We report the observation of electric field induced random lasing in a dye doped liquid crystal system. This was achieved by using a liquid crystal host with negative dielectric anisotropy doped with laser dye PM 597 ...We report the observation of electric field induced random lasing in a dye doped liquid crystal system. This was achieved by using a liquid crystal host with negative dielectric anisotropy doped with laser dye PM 597 in a 75 μm cell with a homeotropic alignment layer. In the absence of an applied field, only amplified spontaneous emission was observed since the liquid crystal orientation was uniform. However, application of a field resulted in a fieldinduced planar-like configuration with local nonuniformity in liquid crystal orientation. This led to random lasing in the energized state(voltage greater than a transition threshold). The onset of lasing occurs by application of either a spatially homogenous or a spatially inhomogeneous electric field across the liquid crystal. The characteristics of the emission spectra as a function of different(i) dye concentration and(ii) applied voltage were investigated using nanosecond pulsed laser excitation at 532 nm. The effects of using an inhomogeneous field were compared to the use of a homogenous field and reported. It is shown that the spatial configuration can be used to alter the emission spectra of the system. The work is used to suggest a new configuration, referred to here as"reverse mode," for liquid crystal-based random lasers. This new configuration may provide additional avenues for their use in commercial devices.展开更多
文摘Erbium-doped holey fiber with hexagonal lattice was modeled by using effective index method. In order to calculate the equivalent step index of the periodic structure of the cladding holey optical fiber, all-vectorial fundamental space filling mode approach was utilized. By using EHll mode, we have numerically solved the rate equations of a three-level pumping scheme for a fiber laser. The obtained results have shown a good agreement with the other experimental results, recently. The results have predicted amplifiers with gain efficiencies as high as 10 dB/mW.
文摘We report the observation of electric field induced random lasing in a dye doped liquid crystal system. This was achieved by using a liquid crystal host with negative dielectric anisotropy doped with laser dye PM 597 in a 75 μm cell with a homeotropic alignment layer. In the absence of an applied field, only amplified spontaneous emission was observed since the liquid crystal orientation was uniform. However, application of a field resulted in a fieldinduced planar-like configuration with local nonuniformity in liquid crystal orientation. This led to random lasing in the energized state(voltage greater than a transition threshold). The onset of lasing occurs by application of either a spatially homogenous or a spatially inhomogeneous electric field across the liquid crystal. The characteristics of the emission spectra as a function of different(i) dye concentration and(ii) applied voltage were investigated using nanosecond pulsed laser excitation at 532 nm. The effects of using an inhomogeneous field were compared to the use of a homogenous field and reported. It is shown that the spatial configuration can be used to alter the emission spectra of the system. The work is used to suggest a new configuration, referred to here as"reverse mode," for liquid crystal-based random lasers. This new configuration may provide additional avenues for their use in commercial devices.
