Reinforced temperature control of a reactive double dividing-wall distillation column

The mass and thermal coupling makes the control of the reactive double dividing-wall distillation column(R-DDWDC) an especially challenging issue with a highly interactive nature. With reference to the separation of an ideal endothermic quaternary reversible reaction with the most unfavorable ranking of relative volatilities(A + B ■ C + D with α_(A)>α_(C)>α_(D)>α_(B)), the operation rationality of the R-DDWDC is studied in this contribution. The four-point single temperature control system leads to great steady-state discrepancies in the compositions of products C and D and the reason stems essentially from the failure in keeping strictly the stoichiometric ratio between reactants A and B. A temperature plus temperature cascade control scheme is then employed to reinforce the stoichiometric ratio control and helps to secure a substantial abatement in the steady-state discrepancies. A temperature difference plus temperature cascade control scheme is finally synthesized and leads even to better performance than the most effective double temperature difference control scheme. These outcomes reveal not only the operation feasibility of the R-DDWDC but also the general significance of the proposed temperature difference plus temperature cascade control scheme to the inferential control of any other complicated distillation columns.

Novel active fault-tolerant control scheme and its application to a double inverted pendulum system

On the basis of the gain-scheduled H∞ design strategy, a novel active fault-tolerant control scheme is proposed. Under the assumption that the effects of faults on the state-space matrices of systems can be of affine parameter dependence, a reconfigurable robust H∞ linear parameter varying controller is developed. The designed controller is a function of the fault effect factors that can be derived online by using a well-trained neural network. To demonstrate the effectiveness of the proposed method, a double inverted pendulum system, with a fault in the motor tachometer loop, is considered.

Dynamic Modeling and Adaptive Fast Nonsingular Terminal Sliding Mode Control for Satellite with Double Rotary Payloads

A robust attitude control methodology is proposed for satellite system with double rotary payloads.The dynamic model is built by the Newton-Euler method and then the dynamic interconnection between satellite′s main body and payloads is described precisely.A nonlinear disturbance observer is designed for satellite′s main body to estimate disturbance torque acted by motion of payloads.Meanwhile,the adaptive fast nonsingular terminal sliding-mode attitude stabilization controller is proposed for satellite′s main body to quicken convergence speed of state variables.Similarly,the adaptive fast nonsingular terminal sliding-mode attitude maneuver controller is designed for each payload to weaken the disturbance effect of motion of satellite′s main body.Simulation results verify the effectiveness of the proposed method.

Remote Control System of 37 mm Double Tube Antiaircraft Gun for Hunan Weather Modification

Hunan Weather Modification Center and Suizhou Dafang Precision Electromechanical Engineering Co.,Ltd. of Hubei commonly transformed and installed 83 double tube antiaircraft guns( 37 mm) of Hunan Province in order to realize remote control of computer. After transformation,loading capacity of ammunition feeding machine became large,which could shorten the time of filling shells in the case of short airspace time;one shell launch volume was more,which could improve hail suppression effect; the degree of automation was greatly improved,which could save manpower by more than 50%. It fully embodied the modernization level of Hunan weather modification operation.

Evaluation matrix with the speed feature based on double inspiriting control lines

Methods of the comprehensive evaluation have been studied for many years. However, the change speed of evaluated objects was rarely considered by the existing evaluation methods. An evaluation matrix is proposed to remedy this deficiency. Firstly, the change speed state （CSS） of the evaluated objects is analyzed based on double inspiriting control lines （DICLs）, and a matrix of the CSS is constructed. Then, 72 elements in the matrix are analyzed, and formulas describing each CSS are given. The efficiency of the proposed evaluation matrix is proved when the CSS merges with the change speed trend （CST） in the dynamic comprehensive evaluation. Finally, a computing example shows that the proposed evaluation matrix is feasible in the dynamic comprehensive evaluation with the speed feature.

Synthesis and controlled release of cloprop herbicides from cloprop-layered double hydroxide and cloprop-zinc-layered hydroxide nanocomposites

Two phenoxyherbicide nanocomposites, namely cloprop-layered double hydroxide and cloprop-zinc- layered hydroxide nanocomposites, have been synthesized by using co-precipitation and direct reaction method. PXRD pattern showed an expansion of interlayer spacing with the value of 21.0 Åand 22.7 Åfor cloprop-layered double hydroxide and cloprop-zinc-layered hydroxide nanocomposite, respectively. It is evident from FTIR and elemental analyses that both nanocomposites were successfully intercalated between the interlayers of layered metal hydroxide. Controlled release of cloprop anion from interlayer of nanocomposites for both cloprop-layered double hydroxide and cloprop-zinc-layered hydroxide nanocomposite into phosphate solution was rapid initially and slow thereafter. The percentage of accumulated release of cloprop anion from cloprop-zinc-layered hydroxide nanocomposite was slightly higher than that from cloprop-layered double hydroxide nanocomposite. Kinetic behavior of cloprop release was governed by pseudo-second-order for cloprop-layered double hydroxide nanocomposite while parabolic diffusion for cloprop-zinc-layered hydroxide nanocomposite. Results from this study highlight the potential of both nanocomposites as capsulated material for controlled release of cloprop phenoxyherbicides anion.

Phase Control of Transient Optical Properties of Double Coupled Quantum-Dot Nanostructure via Gaussian Laser Beams

We theoretically analyze the transient properties of a probe field absorption and dispersion in a coupled semiconductor double-quantum-dot nanostructure.We show that in the presence of the Gaussian laser beams,absorption and dispersion of the probe field can be dramatically influenced by the relative phase between applied fields and intensity of the Gaussian laser beams.Transient and steady-state behaviors of the probe field absorption and dispersion are discussed to estimate the required switching time.The estimated range is between 5-8 ps for subluminal to superluminal light propagation.

Design of Nonlinear Decoupling Controller for Double-electromagnet Suspension System

Aiming at the coupling characteristic between the two groups of electromagnets embedded in the module of the maglev train, a nonlinear decoupling controller is designed. The module is modeled as a double-electromagnet system, and based on some reasonable assumptions its nonlinear mathematical model, a MIMO coupling system, is derived. To realize the linearization and decoupling from the input to the output, the model is linearized exactly by means of feedback linearization, and an equivalent linear decoupling model is obtained. Based on the linear model, a nonlinear suspension controller is designed using state feedback. Simulations and experiments show that the controller can effectually solve the coupling problem in double-electromagnet suspension system.

ON DE FINETTI'S OPTIMAL IMPULSE DIVIDEND CONTROL PROBLEM UNDER CHAPTER 11 BANKRUPTCY

Motivated by recent advances made in the study of dividend control and risk management problems involving the U.S.bankruptcy code,in this paper we follow[44]to revisit the De Finetti dividend control problem under the reorganization process and the regulator's intervention documented in U.S.Chapter 11 bankruptcy.We do this by further accommodating the fixed transaction costs on dividends to imitate the real-world procedure of dividend payments.Incorporating the fixed transaction costs transforms the targeting optimal dividend problem into an impulse control problem rather than a singular control problem,and hence computations and proofs that are distinct from[44]are needed.To account for the financial stress that is due to the more subtle concept of Chapter 11 bankruptcy,the surplus process after dividends is driven by a piece-wise spectrally negative Lévy process with endogenous regime switching.Some explicit expressions of the expected net present values under a double barrier dividend strategy,new to the literature,are established in terms of scale functions.With the help of these expressions,we are able to characterize the optimal strategy among the set of admissible double barrier dividend strategies.When the tail of the Lévy measure is log-convex,this optimal double barrier dividend strategy is then verified as the optimal dividend strategy,solving our optimal impulse control problem.

Double-directional control bolt support technology and engineering application at large span Y-type intersections in deep coal mines

Under deep and complex geological conditions,severe deformation occurs at intersection points of Y-type roadways with large cross sections during engineering projects in coal mines,especially at junction arches.Based on in-situ investigations and theoretical studies,we have summarized typical forms of destruction and identified high stress and unrestricted support at both sides of junction arch as its main causes.In this study,we also presented double-directional control bolt support technology for a large Y-type span intersection,applied to deep intersection engineering in the Jiahe Coal Mine,which has proved effective.

A new control method based on the lattice hydrodynamic model considering the double flux difference

A new feedback control method is derived based on the lattice hydrodynamic model in a single lane. A signal based on the double flux difference is designed in the lattice hydrodynamic model to suppress the traffic jam. The stability of the model is analyzed by using the new control method. The advantage of the new model with and without the effect of double flux difference is explored by the numerical simulation. The numerical simulations demonstrate that the traffic jam can be alleviated by the control signal.

Dimensionless Study on Secretion Clearance of a Pressure Controlled Mechanical Ventilation System with Double Lungs

A pressure controlled mechanical ventilator with an automatic secretion clearance function can improve secretion clearance safely and efficiently.Studies on secretion clearance by pressure controlled systems show that these are suited for clinical applications.However,these studies are based on a single lung electric model and neglect the coupling between the two lungs.The research methods applied are too complex for the analysis of a multi-parameter system.In order to understand the functioning of the human respiratory system,this paper develops a dimensionless mathematical model of doublelung mechanical ventilation system with a secretion clearance function.An experiment is designed to verify the mathematical model through comparison of dimensionless experimental data and dimensionless simulation data.Finally,the coupling between the two lungs is studied,and an orthogonal experiment designed to identify the impact of each parameter on the system.

Calaulation of Time-Optimal Control Law for Double Integrator System with Complex Constraints: Endpoint Backward Method

An endpoint backward method is proposed to calculate the time-optimal control law of double integrator system. First, the time intervals between the switch points and the endpoints are calculated. Then, the positions of switch points are decided according to the motion equation, and the switch line is formed. Theoretical analysis shows that this method can be used to solve the double integrator system with functional constraint target set and deal with the second order oscillation system.

Approximate Controllability of the System Governed by Double Coupled Semilinear Degenerate Parabolic Equations

This paper concerns the approximate controllability of the initialboundary problem of double coupled semilinear degenerate parabolic equations.The equations are degenerate at the boundary,and the control function acts in the interior of the spacial domain and acts only on one equation.We overcome the difficulty of the degeneracy of the equations to show that the problem is approximately controllable in L2 by means of a fixed point theorem and some compact estimates.That is to say,for any initial and desired data in L2,one can find a control function in L2 such that the weak solution to the problem approximately reaches the desired data in L2 at the terminal time.

The role of NBS1 in DNA double strand break repair, telomere stability, and cell cycle checkpoint control

真核细胞的房间的染色体在由环境代理人和内长的新陈代谢的副产品的连续袭击下面。在 DNA 导致的损坏通常导致细胞的事件的串联， DNA 损坏反应。DNA 损坏反应的失败能由减少 DNA 修理的效率和忠实导致恶意的开发。NBS1 蛋白质是在对 DNA 损坏和 chromosomal 正直的维护的细胞的反应起一个关键作用的 MRE11/RAD50/NBS1 建筑群(MRN ) 的一个部件。在 NBS1 基因的变化为 Nijmegen 破裂症候群(NBS ) 负责，给予增加的倾向到恶意的开发的世袭混乱。从病人们在 DNA 双海滨裂缝的修理指向缺乏的 NBS 孤立的房间的 phenotypic 特征。这里，我们在 DNA 损坏反应考察 NBS1 的角色的当前的知识。强调在 DNA 双海滨修理，察觉到并且发信号的 DNA 损坏的调整，房间周期检查点控制和 telomere 稳定性的维护被放在 NBS1 的角色上。

The New Neutrosophic Double and Triple Exponentially Weighted Moving Average Control Charts

The concept of neutrosophic statistics is applied to propose two monitoring schemes which are an improvement of the neutrosophic exponentially weighted moving average(NEWMA)chart.In this study,two control charts are designed under the uncertain environment or neutrosophic statistical interval system,when all observations are undermined,imprecise or fuzzy.These are termed neutrosophic double and triple exponentially weighted moving average(NDEWMA and NTEWMA)control charts.For the proficiency of the proposed chart,Monte Carlo simulations are used to calculate the run-length characteristics(such as average run length(ARL),standard deviation of the run length(SDRL),percentiles(P_(25),P_(50),P_(75)))of the proposed charts.The structures of the proposed control charts are more effective in detecting small shifts while these are comparable with the other existing charts in detecting moderate and large shifts.The simulation study and real-life implementations of the proposed charts show that the proposed NDEWMA and NTEWMA charts perform better in monitoring the process of road traffic crashes and electric engineering data as compared to the existing control charts.Therefore,the proposed charts will be helpful in minimizing the road accident and minimizing the defective products.Furthermore,the proposed charts are more acceptable and actual to apply in uncertain environment.

Stability analysis and control technology of gob‑side entry retaining with double roadways by flling with high‑water material in gently inclined coal seam

To ameliorate the defects of insufcient support resistance of traditional roadside flling bodies for gob-side entry retaining(GER),overcome the inability to adapt to the deformation of surrounding rock,and isolate the goaf efectively,a new type of high-water material as a roadside flling body for GER technology with double roadways was proposed.The instability analysis and control technology of GER with double roadways by flling high-water material into a gently inclined coal seam were studied.The basic mechanical properties of the new high-water material were investigated through laboratory experiments,and their main advantages were identifed.The reasonable width of the roadside flling wall of a high-water material was obtained by combining ground pressure observation and theoretical calculations.The distribution characteristics of the stress and plastic zone of surrounding rock of GER after being stabilized by the disturbance of the working face were studied using numerical simulations,and the failure range of GER by flling with high-water material was revealed.Based on this,a coupling control technology of anchor cables and bolts+single props+metal mesh+anchor bolts is proposed.Through the coupling methods of arranging borehole peeping and observing the convergences of surrounding rock,the results demonstrate that GER with double roadways by flling with a 1.8-m-wide high-water material has a good control efect.The above research will play an active role in promoting the application of high-water materials in GER roadside flling.

Influence of Pre-injection Control Parameters on Main-injection Fuel Quantity for an Electronically Controlled Double-valve Fuel Injection System of Diesel Engine

一个模拟模型一电子地控制了二个螺线管阀门燃料注射系统因为一台柴油机引擎在 AMESim 环境被建立。模型的精确性与试验性的数据通过比较被验证。在不同控制模式下面的主要注射的数量上的注射前控制参数的影响被分析。在喷洒控制阀门模式，主要注射的燃料数量逐渐地减少然后因为多注射居住时间的增加，到达稳定的水平。在针控制阀门模式，主要注射的燃料数量与升起的多注射居住时间增加；这效果在高速度的革命和大主要注射的脉搏宽度变得更明显。注射前脉搏宽度没在二个控制模式下面在主要注射的数量上有明显的影响；在主要注射的数量的变化在 1 mm3 的范围。

Modeling and Analysis of Submerged Arc Weld Power Supply Based on Double Closed-Loop Control

According to the soft-switching pulsed SAW (Submerged arc weld) weld power supply based on the double closed-loop constant current control mode, a small signal mathematic model of main circuit of soft-switching SAW inverter was established by applying the method of three-terminal switching device modeling method, and the math-ematic model of double closed-loop phase-shift control system circuit was established by applying the method of state-space averaging method. Dynamic performance of the inverter was analyzed on base of the established math-ematic model, and the tested wave of dynamic performance was shown by experimentation. Research and experimentation show that relation between structure of the power source circuit and dynamic performance of the controlling system can be announced by the established mathematic model, which provides development of power supply and optimized design of controlling parameter with theoretical guidance.

Effect Analysis of "One Prevention Double Reduction" of Aerial Control in Corn Fields in Daiyue District, Tai’an City

The main technical content of full mechanized corn production in Daiyue District is explained,and the problems of disease and insect pest control in the middle and late growth stage of corn in full mechanized production are analyzed."One prevention double reduction"of corn performed by unmanned aerial vehicle(UAV)and self-propelled sprayer is compared and analyzed,and some suggestions are put forward for further popularization and application of full mechanized corn production.