Influences of double diffusion upon radiative flow of thin film Maxwell fluid through a stretching channel

This work explores the influence of double diffusion over thermally radiative flow of thin film hybrid nanofluid and irreversibility generation through a stretching channel.The nanoparticles of silver and alumina have mixed in the Maxwell fluid(base fluid).Magnetic field influence has been employed to channel in normal direction.Equations that are going to administer the fluid flow have been converted to dimension-free notations by using appropriate variables.Homotopy analysis method is used for the solution of the resultant equations.In this investigation it has pointed out that motion of fluid has declined with growth in magnetic effects,thin film thickness,and unsteadiness factor.Temperature of fluid has grown up with upsurge in Brownian motion,radiation factor,and thermophoresis effects,while it has declined with greater values of thermal Maxwell factor and thickness factor of the thin film.Concentration distribution has grown up with higher values of thermophoresis effects and has declined for augmentation in Brownian motion.

On the sampling strategies and models for measuring diffusion exchange with a double diffusion encoding sequence

Water exchange between the different compartments of a heterogeneous specimen can be characterized via diffusion magnetic resonance imaging(dMRI).Many analysis frameworks using dMRI data have been proposed to describe exchange,often using a double diffusion encoding(DDE)stimulated echo sequence.Techniques such as diffusion exchange weighted imaging(DEWI)and the filter exchange and rapid exchange models,use a specific subset of the full space DDE signal.In this work,a general representation of the DDE signal was employed with different sampling schemes(namely constant b1,diagonal and anti-diagonal)from the data reduction models to estimate exchange.A near-uniform sampling scheme was proposed and compared with the other sampling schemes.The filter exchange and rapid exchange models were also applied to estimate exchange with their own subsampling schemes.These subsampling schemes and models were compared on both simulated data and experimental data acquired with a benchtop MR scanner.In synthetic data,the diagonal and near-uniform sampling schemes performed the best due to the consistency of their estimates with the ground truth.In experimental data,the shifted diagonal and near-uniform sampling schemes outperformed the others,yielding the most consistent estimates with the full space estimation.The results suggest the feasibility of measuring exchange using a general representation of the DDE signal along with variable sampling schemes.In future studies,algorithms could be further developed for the optimization of sampling schemes,as well as incorporating additional properties,such as geometry and diffusion anisotropy,into exchange frameworks.

Effects of g-jitter and radiation on three-dimensional double diffusion stagnation point nanofluid flow

The unsteady double diffusion of the boundary layer with the nanofluid flow near a three-dimensional(3D)stagnation point body is studied under a microgravity environment.The effects of g-jitter and thermal radiation exist under the microgravity environment,where there is a gravitational field with fluctuations.The flow problem is mathematically formulated into a system of equations derived from the physical laws and principles under the no-slip boundary condition.With the semi-similar transformation technique,the dimensional system of equations is reduced into a dimensionless system of equations,where the dependent variables of the problem are lessened.A numerical solution for the flow problem derived from the system of dimensionless partial differential equations is obtained with the Keller box method,which is an implicit finite difference approach.The effects studied are analyzed in terms of the physical quantities of principle interest with the fluid behavior characteristics,the heat transfer properties,and the concentration distributions.The results show that the value of the curvature ratio parameter represents the geometrical shape of the boundary body,where the stagnation point is located.The increased modulation amplitude parameter produces a fluctuating behavior on all physical quantities studied,where the fluctuating range becomes smaller when the oscillation frequency increases.Moreover,the addition of Cu nanoparticles enhances the thermal conductivity of the heat flux,and the thermal radiation could increase the heat transfer properties.

Seasonal variation of the double diffusion processes at the Strait of Hormuz

Profiles of salinity and temperature were measured in the strait of Hormuz（SH） during the winter of 2012, spring and summer of 2013. To investigate the double diffusion（DD） processes, Turner（TU） angle values are calculated in all the stations in the SH. Different TU angle values correspond to salt fingering（SF）, diffusive convection（DC）and stable stratification. The distributions of the two forms of DD were plotted vertically along transects in the eastern, central and western part of the SH, and corresponding DD processes were described. The results show that both SF and DC occurred in most part of the study area. Two different water masses（the Indian Ocean surface water and the Persian Gulf water） were evident at the SH, and SF and DC were evident at the interface of two water masses. Due to evaporation, SF occurred in the surface layer of most Stations throughout the year. In the eastern part of the SH, occurrences of DC were more feasible in wintertime. SF was the main phenomenon at the end of hot season. For central part, SF occurred throughout the year in water column. In the western part,water column was stable in summer and DC happened in most part of water column in winter.

Mechanism of Thermally Radiative Prandtl Nanofluids and Double-Diffusive Convection in Tapered Channel on Peristaltic Flow with Viscous Dissipation and Induced Magnetic Field

The application of mathematical modeling to biological fluids is of utmost importance, as it has diverse applicationsin medicine. The peristaltic mechanism plays a crucial role in understanding numerous biological flows. In thispaper, we present a theoretical investigation of the double diffusion convection in the peristaltic transport of aPrandtl nanofluid through an asymmetric tapered channel under the combined action of thermal radiation andan induced magnetic field. The equations for the current flow scenario are developed, incorporating relevantassumptions, and considering the effect of viscous dissipation. The impact of thermal radiation and doublediffusion on public health is of particular interest. For instance, infrared radiation techniques have been used totreat various skin-related diseases and can also be employed as a measure of thermotherapy for some bones toenhance blood circulation, with radiation increasing blood flow by approximately 80%. To solve the governingequations, we employ a numerical method with the aid of symbolic software such as Mathematica and MATLAB.The velocity, magnetic force function, pressure rise, temperature, solute (species) concentration, and nanoparticlevolume fraction profiles are analytically derived and graphically displayed. The results outcomes are compared withthe findings of limiting situations for verification.

Valuing Credit Default Swap under a double exponential jump diffusion model

This paper discusses the valuation of the Credit Default Swap based on a jump market, in which the asset price of a firm follows a double exponential jump diffusion process, the value of the debt is driven by a geometric Brownian motion, and the default barrier follows a continuous stochastic process. Using the Gaver-Stehfest algorithm and the non-arbitrage asset pricing theory, we give the default probability of the first passage time, and more, derive the price of the Credit Default Swap.

Observational analysis of the double-diffusive convection in the deep Canada Basin

The Canada Basin （CB） is the largest sub-basin in the Arctic, with the deepest abyssal plain of 3 850 m. The double-diffusive process is the possible passage through which the geothermal energy affects the above isolated deep waters. With the temperature-salinity-pressure observations in 2003, 500-m-thick transition layers and lower 1 000-m-thick bottom homogenous layers were found below 2 400 m in the central deep CB. Staircases with downward-increasing temperature and salinity are prominent in the transition layers, suggesting the double- diffusive convection in deep CB. The interface of the stairs is about 10 m thick with 0.001-0.002℃ temperature difference, while the thicknesses of the homogenous layers in the steps decrease upward from about 60 to 20 m. The density ratio in the deep central CB is generally smaller than 2, indicating stronger double-diffusive convection than that in the upper ocean of 200-400 m. The heat flux through the deepest staircases in the deep CB varies between 0.014 and 0.031 W/m2, which is one-two orders smaller than the upper double-diffusive heat flux, but comparable to the estimates of geothermal heat flux.

Lattice Boltzmann simulation of double diffusive natural convection in a square cavity with a hot square obstacle

Double diffusion convection in a cavity with a hot square obstacle inside is simulated using the lattice Boltzmann method. The results are presented for the Rayleigh numbers 104,105 and 106, the Lewis numbers 0.1, 2 and 10 and aspect ratio A(obstacle height/cavity height) of 0.2, 0.4 and 0.6 for a range of buoyancy number N = 0 to- 4 with the effect of opposing flow. The results indicate that for |N| b 1, the Nusselt and Sherwood numbers decrease as buoyancy ratio increases, while for |N| N 1, they increase with |N|. As the Lewis number increases, higher buoyancy ratio is required to overcome the thermal effects and the minimum value of the Nusselt and Sherwood numbers occur at higher buoyancy ratios. The increase in the Rayleigh or Lewis number results in the formation of the multi-cell flow in the enclosure and the vortices will vanish as |N| increases.

Numerical simulation for 2D double-diffusive convection(DDC) in rectangular enclosures based on a high resolution upwind compact streamfunction model Ⅰ: numerical method and code validation

A high resolution upwind compact streamfunction numerical algorithm for two-dimensional(2D)double-diffusive convection(DDC)is developed.The unsteady Navier-Stokes(N-S)equations in the streamfunction-velocity form and the scalar temperature and concentration equations are used.An optimized third-order upwind compact(UCD3 opt)scheme with a low dispersion error for the first derivatives is utilized to approximate the third derivatives of the streamfunction in the advection terms of the N-S equations and the first derivatives in the advection terms of the scalar temperature and concentration equations.The remaining first derivatives of the streamfunction(velocity),temperature,and concentration variables used in the governing equations are discretized by the fourth-order compact Pade(SCD4)schemes.With the temperature and concentration variables and their approximate values of the first derivatives obtained by the SCD4 schemes,the explicit fourth-order compact schemes are suggested to approximate the second derivatives of temperature and concentration in the diffusion terms of the energy and concentration equations.The discretization of the temporal term is executed with the second-order Crank-Nicolson(C-N)scheme.To assess the spatial behavior capability of the established numerical algorithm and verify the developed computer code,the DDC flow is numerically solved.The obtained results agree well with the benchmark solutions and some accurate results available in the literature,verifying the accuracy,effectiveness,and robustness of the provided algorithm.Finally,a preliminary application of the proposed method to the DDC is carried out.

Turbulent Double-Diffusive Natural Convection and Entropy Generation within an Inclined Square Cavity

The present study deals with double-diffusive convection within a two-dimensional inclined cavity filled with an air-CO_(2) binary gas mixture.The left and the right vertical walls are differentially heated and subjected to different locations of(CO_(2))contaminants to allow for the variation of the buoyancy strength(N).However,the horizontal walls are assumed adiabatic.The simulations are conducted using the finite volume method to solve the conservation equations of continuity,momentum,energy,and species transport.Good agreement with other numerical results in the literature is obtained.The effect of multiple parameters,namely,buoyancy ratio(N),thermal Rayleigh number(Ra),and inclination angle(α)on entropy generation rate is analyzed and discussed in the postprocessing stage,while considering both laminar and turbulent flow regimes.The computations reveal that these parameters considerably affect both the heat and mass transfer performances of the system.

Analysis of hot-carrier degradation in N-LDMOS transistor with step gate oxide

In order to minimize the hot-carrier effect（HCE）and maintain on-state performance in the high voltage N-type lateral double diffused MOS（N-LDMOS）, an optimized device structure with step gate oxide is proposed. Compared with the conventional configuration, the electric field under the gate along the Si-SiO2 interface in the presented N-LDMOS can be greatly reduced, which favors reducing the hot-carrier degradation. The step gate oxide can be achieved by double gate oxide growth, which is commonly used in some smart power ICs. The differences in hot-carrier degradations between the novel structure and the conventional structure are investigated and analyzed by 2D technology computer-aided design（TCAD）numerical simulations, and the optimal length of the thick gate oxide part in the novel N-LDMOS device can also be acquired on the basis of maintaining the characteristic parameters of the conventional device. Finally, the practical degradation measurements of some characteristic parameters can also be carried out. It is found that the hot-carrier degradation of the novel N-LDMOS device can be improved greatly.

Study of Double Diffusivity and Heat Conducting Phenomena under the Casson Nanofluid Flowing through a Vertical Peristaltic Tube

The current article discusses the peristaltic flow of the Casson fluid model with implications for double diffusivity,radiative flux,variable conductivity and viscosity.This study offers a thorough understanding of the functioning and illnesses of embryological organs,renal systems,respiratory tracts,etc.,that may be useful to medical professionals and researchers.The main purpose of the study is to evaluate the consequences of double diffusivity on the peristaltic flow of nanofluid.By implementing the appropriate transformation,the governed differential equations of momentum,temperature,concentration and double diffusivity are worked out numerically.The lowest Reynolds number Re→0 and highest wavelength�→∞are used.The ramifications of pertinent parameters on the velocity field,heat,chemical reaction rate and double diffusivity are discussed by plotting the graphs using the bvp4c technique.Our analysis shows that solutal and thermal Grashof numbers enhance the motion of fluid flow over the pumping area of the peristaltic boundary.The activation energy and Lewis number indicate the opposite impact on concentration distribution.Due to variations in thermophoresis and the Brownian parameter,the heating process slows during the pumping section and accelerates during the free pumping section.The graph of double diffusivity initially goes upward by escalating Dufour and Brownian parameters and then moves down over the right sinusoidal geometry.

Thermohaline finestructure observed near the northern Philippine coast

Using hydrographic measurements from three recent surveys in the western tropical Pacific, this study revealed the existence and general features of thermohaline finestructure near the northem Philippine coast. Pronounced finestructttres were detected in the layers of the North Pacific Tropical Water （NPTW） and the North Pacific Intermediate Water （NPIW） during all three cruises and shown to be mainly thermohaline intrusions. Characteristics of the intrusions were further investigated with spiciness curvature and salinity anomaly methods. The vertical scale of the intrusions was 20-50 m and 50-100 m in the NPTW and NPIW layers, respectively. Within the NPTW layer, the Turner angle distribution and correlation between salinity and density anomalies suggested that diffusive convection between surface fresh water and subsurface saline water played an important role in the development and maintenance of the intrusions. In addition, connection between thermohaline finestructure and larger-scale oceanic processes was explored using historical hydrographic data. The results reveal that the salinity field and the distribution of the intrusions in this region were largely determined by mesoscale eddies. As a result of eddy stirring, both isopycnal and diapycnal temperature/salinity gradients were strengthened, which gave rise to the development of thermohaline intrusions. The intrusions acted to enhance heat and salt fluxes and resulted in the mixing of water masses being more efficient. By linking mesoscale eddy stirring to micro-scale diffusion, thermohaline finestructure plays a vital role in the ocean energy cascade and water mass conversion in the northern Philippine Sea.

Flow of Eyring-Powell liquid due to oscillatory stretchable curved sheet with modified Fourier and Fick’s model

This study deals with the features of the mass and heat transport mechanism by adopting a modified version of Fourier and Fick’s model known as the CattaneoChristov double diffusive theory.The time-dependent magnetohydrodynamic(MHD)flow of the Eyring-Powell liquid across an oscillatory stretchable curved sheet in the presence of Fourier and Fick’s model is investigated.The acquired set of flow equations is transformed into the form of nonlinear partial differential equations(PDEs)by applying appropriate similarity variables.A convergent series solution to the developed nonlinear equations is accomplished with the help of an analytical approach,i.e.,the homotopy analysis method(HAM).The consequences of diverse parameters,including the dimensionless EyringPowell liquid parameter,the radius of curvature,the Schmidt/Prandtl numbers,the ratio of the oscillatory frequency of the sheet to its stretchable rate constant,the mass and thermal relaxation variables involved in the flow,and the heat and mass properties,are displayed through graphs and tables.It is noted from this study that the amplitude of the pressure distribution rises for the high parametric values of the Eyring-Powell parameter.

Transportation of heat through Cattaneo-Christov heat flux model in non-Newtonian fluid subject to internal resistance of particles

Thermal conduction which happens in all phases(liquid,solid,and gas)is the transportation of internal energy through minuscule collisions of particles and movement of electrons within a working body.The colliding particles comprise electrons,molecules,and atoms,and transfer disorganized microscopic potential and kinetic energy,mutually known as the internal energy.In engineering sciences,heat transfer comprises the processes of convection,thermal radiation,and sometimes mass transportation.Typically,more than one of these procedures may happen in a given circumstance.We use the Cattaneo-Christov(CC)heat flux model instead of the Fourier law of heat conduction to discuss the behavior of heat transportation.A mathematical model is presented for the Cattaneo-Christov double diffusion(CCDD)in the flow of a non-Newtonian nanofluid(the Jeffrey fluid)towards a stretched surface.The magnetohydrodynamic(MHD)fluid is considered.The behaviors of heat and mass transportation rates are discussed with the CCDD.These models are based on Fourier’s and Fick’s laws.The convective transportation in nanofluids is discussed,subject to thermophoresis and Brownian diffusions.The nonlinear governing flow expression is first altered into ordinary differential equations via appropriate transformations,and then numerical solutions are obtained through the built-in-shooting method.The impact of sundry flow parameters is discussed on the velocity,the skin friction coefficient,the temperature,and the concentration graphically.It is reported that the velocity of material particles decreases with higher values of the Deborah number and the ratio of the relaxation to retardation time parameter.The temperature distribution enhances when the Brownian motion and thermophoresis parameters increase.The concentration shows contrasting impact versus the Lewis number and the Brownian motion parameter.It is also noticed that the skin friction coefficient decreases when the ratio of the relaxation to retardation time parameter increases.

Investigation of generalized Fick's and Fourier's laws in the second-grade fluid flow

The second-grade fluid flow due to a rotating porous stretchable disk is modeled and analyzed. A porous medium is characterized by the Darcy relation. The heat and mass transport are characterized through Cattaneo-Christov double diffusions.The thermal and solutal stratifications at the surface are also accounted. The relevant nonlinear ordinary differential systems after using appropriate transformations are solved for the solutions with the homotopy analysis method(HAM). The effects of various involved variables on the temperature, velocity, concentration, skin friction, mass transfer rate, and heat transfer rate are discussed through graphs. From the obtained results,decreasing tendencies for the radial, axial, and tangential velocities are observed. Temperature is a decreasing function of the Reynolds number, thermal relaxation parameter,and Prandtl number. Moreover, the mass diffusivity decreases with the Schmidt number.

Performance improvement of c-Si solar cell by a combination of SiNx/SiOx passivation and double P-diffusion gettering treatment

SiNx/SiOx passivation and double side P-diffusion gettering treatment have been used for the fabrication of c-Si solar cells. The solar cells fabricated have high open circuit voltage and short circuit current after the double P-diffusion treatment. In addition to better surface passivation effect, SiNx/SiOx layer has lower reflectivity in long wavelength range than conventional SiNx film. As a consequence, such solar cells exhibit higher conversion efficiency and better internal quantum efficiency, compared with conventional c-Si solar cells.

Modeling and Parameter Extraction of VDMOSFET

A sub circuit model for VDMOS is built according to its physical structure.Parameters and formulas describing the device are also derived from this model.Comparing to former results,this model avoids too many technical parameters and simplify the sub circuit efficiently.As a result of numeric computation,this simple model with clear physical conception demonstrates excellent agreements between measured and modeled response (DC error within 5%,AC error within 10%).Such a model is now available for circuit simulation and parameter extraction.

Heat and mass transfer enhancement in triangular pyramid solar still using CNT-water nanofluid

This work represents a 3 D numerical study of the effects of carbon nanotube(CNT)-water nanofluids on the double diffusive convection inside the triangular pyramid solar still.This numerical investigation is performed for wide ranges of governing parameters such as buoyancy ratio(-10≤N≤0),volumetric fraction of nanoparticles(0≤Φ≤0.05) and Rayleigh number(10^(3)≤Ra≤10^(5)).The results are presented in terms of flow structure,temperature field,heat and mass transfer rates variations.It was found that the buoyancy ratio can be considered as an optimizing parameter for the heat and mass transfer,and the use of CNT has a positive effect on the solar still performances.

A Study of Multi-Permeating TiN/Ti Alloying Layer Using Plasma Surface Alloying Technology

TiN/Ti multi-permeating alloying layer has been formed on the low carbon steel by means of the double glow-discharge plasma surface alloying technique and hollow-cathode effect. The alloying layer was detected by axiovert 25 CA optical microscope with computer analyzing software （LEC）, GDA-2 glow discharge spectroscopy （GDS）, X-ray diffraction （XRD） and galvanochemical method. The results showed that the thickness of TiN/Ti multi-permeating alloying layer was about 10μm, the content of Ti on the surface was up to 63.48 wt% and the content of N was up to 12.46 wt%. The atom Ti and N concentrations changed gradually across the depth of the alloying layer and the preferred orientation of TiN/Ti alloying layer was crystal surface （200）. The multi-permeating alloying layer and substrate were combined through metallurgy. The surface appearances of the multi-permeating alloying layer were uniform and of a compact cellular structure. The hardness of the surface was about 1600-3000 HV0.1. The corrosion resistance of the permeating TiN/Ti alloying layer in 0.5 mol/L H2SO4 solution was greatly increased and the corrosion rate was only 0.3082 g/m^2. h.