Aluminum foam is widely used in diverse areas to minimize the weight and maximize the absorption of shock energy in lightweight structures and various bio-materials.It presents a number of advantages,such as low densi...Aluminum foam is widely used in diverse areas to minimize the weight and maximize the absorption of shock energy in lightweight structures and various bio-materials.It presents a number of advantages,such as low density,incombustibility,non-rigidity,excellent energy absorptivity,sound absorptivity and low heat conductivity.The aluminum foam with an air cell structure was placed under the TDCB Mode II tensile load by using Landmark equipment manufactured by MTS to examine the shear failure behavior.The angle of the tapered adhesively-bonded surfaces of specimens was designated as a variable,and three models were developed with the inclined angles differing from one another at 6°,8° and 10°.The specimens with the inclined angles of 6°,8° and 10° have the maximum reaction forces of 168 N,194 N when the forced displacements are 6,5 and 4.2 mm respectively.There are three specimens with the inclined angles of 10°,8° and 6° in the order of maximum reaction force.As the analysis result,the maximum equivalent stresses of 0.813 MPa and 0.895 MPa happened when the forced displacements of 6 mm and 5 mm proceeded at the models of 6° and 8°,respectively.A simulation was carried out on the basis of finite element method and the experimental design.The results of the experiment and the simulation analysis are shown not different from each other significantly.Thus,only a simulation could be confirmed to be performed in substitution of an experiment,which is costly and time-consuming in order to determine the shearing properties of materials made of aluminum foam with artificial data.展开更多
Fines migration is defined as separation of a Nano-sized particle by fluid flow in porous media and its migration along some distances and its entrapment in a narrow pore throat or its settlement on pore wall. Althoug...Fines migration is defined as separation of a Nano-sized particle by fluid flow in porous media and its migration along some distances and its entrapment in a narrow pore throat or its settlement on pore wall. Although this phenomenon happens in scales of Nano-meters, it can lead to sever irretrievable damages. This damage includes permeability reduction that causes drastic oil recovery reduction. There are several forces impacting a fine that is placed on a pore wall. Some of most important forces affecting settlement of a fine in porous media in presence of a fluid are electrical forces. Electrical forces consist of several long and short range forces. This study focuses on a long range force called Double Layer Force (DLF) that beside Van der Waals is one of most powerful electrical forces. DLF is a repulsive force that can repel a particle from pore wall and result separation of a Nano-sized solid which subsequently moves along with flowing fluid and clogs a throat. The DLF depends on the solid material (reservoir rock and fine) and fluid properties (i.e. ionic strength, pH). This study investigates how each of these parameters affects DLF and introduces proper conditions for reservoir water flooding for controlling fines migration.展开更多
In strong-field double ionization,two electrons are ionized by intense laser field.These two electrons move in the laser field and the state is described by a Coulomb-Volkov state,where the repulsive Coulomb state des...In strong-field double ionization,two electrons are ionized by intense laser field.These two electrons move in the laser field and the state is described by a Coulomb-Volkov state,where the repulsive Coulomb state describes the relative motion of the two electrons and the Volkov state describes the center-of-mass motion of the two electrons in the laser field.In the frame of scattering theory,we derive a simple analytical formula of the double ionization of He-like atoms.The effect of the Coulomb force between two electrons on the double ionization process is discussed.Numerical studies disclose that the Coulomb force enhances the ionization rate of high-energy electrons but suppresses the ionization rate of the lowest-energy electrons.展开更多
While atomic force microscopy (AFM) has been increasingly applied to life science, artifactual measurements or images can occur during nanoscale analyses of cell components and biomolecules. Tip-sample convolution eff...While atomic force microscopy (AFM) has been increasingly applied to life science, artifactual measurements or images can occur during nanoscale analyses of cell components and biomolecules. Tip-sample convolution effect is the most common mechanism responsible for causing artifacts. Some deconvolution-based methods or algorithms have been developed to reconstruct the specimen surface or the tip geometry. Double-tip or double-probe effect can also induce artifactual images by a different mechanism from that of convolution effect. However, an objective method for identifying the double-tip/probe-induced artifactual images is still absent. To fill this important gap, we made use of our expertise of AFM to analyze artifactual double-tip images of cell structures and biomolecules, such as linear DNA, during AFM scanning and imaging. Mathematical models were then generated to elucidate the artifactual double-tip effects and images develop during AFM imaging of cell structures and biomolecules. Based on these models, computational formulas were created to measure and identify potential double-tip AFM images. Such formulas proved to be useful for identification of double-tip images of cell structures and DNA molecules. The present studies provide a useful methodology to evaluate double-tip effects and images. Our results can serve as a foundation to design computer-based automatic detection of double-tip AFM images during nanoscale measuring and imaging of biomolecules and even non-biological materials or structures, and then personal experience is not needed any longer to evaluate artifactual images induced by the double-tip/probe effect.展开更多
-In this paper, the maximum entropy spectral, the cross-spectral and the frequency response analyses are madeon the basis of the data of monthly mean sea levels at coastal stations in the Bohai Sea during 1965-1986. T...-In this paper, the maximum entropy spectral, the cross-spectral and the frequency response analyses are madeon the basis of the data of monthly mean sea levels at coastal stations in the Bohai Sea during 1965-1986. The results show that the annual fluctuations of the monthly mean sea levels in the Bohai Sea are the results of the coupling response of seasonal variations of the marine hydrometeorological factors. Furthermore, the regression prediction equation is obtained by using the double screening stepwise regression analysis method . Through the prediction test , it is proved that the obtained results are desirable.展开更多
In the impact tests of soft materials, we sometimes observe a thorn shape in the rising segment of the impact force waveform. However, the reason for the occurrence of the thorn shape has not been made clear. In this ...In the impact tests of soft materials, we sometimes observe a thorn shape in the rising segment of the impact force waveform. However, the reason for the occurrence of the thorn shape has not been made clear. In this study, thorn-shape waveforms of several soft materials are measured using compact drop test equipment under the condition of a flat frontal impact. A flat frontal impact is the condition where a drop hammer with a flat bottom surface strikes a plate-like soft material in the normal direction. Synchronized impact forces are measured using two sensors installed on both the drop hammer side and the floor side. The examined soft materials are a sponge sheet, sponge rubber sheet, gel sheet, rubber sheet, flat oil clay, low-rebound urethane foam, cork sheet, sliced ham, pork ham steak, and pork. Based on the test results, the features of the thorn-shape waveforms are discussed from a bird’s-eye view. Furthermore, the occurrence mechanism of the thorn-shape waveforms is discussed from the viewpoint of viscosity discontinuity and the double-strike phenomenon.展开更多
The elastic-plastic transition regime and brittle-ductile transition regime in scratch process for optical glass BK7 were analyzed based on the Hertzian equation and the stress ratio theory which was proposed by Wei. ...The elastic-plastic transition regime and brittle-ductile transition regime in scratch process for optical glass BK7 were analyzed based on the Hertzian equation and the stress ratio theory which was proposed by Wei. The interacting scratch process for optical glass BK7 with the grit interval distance as the variable was simulated by the ABAQUS software of finite element simulation based on the energy fracture theory. Double grits interacting scratch test for optical glass BK7 was carried out on the DMG ULTRASONIC 70-5 linear, by which the reliability of finite element simulation was verified. The surface morphology of the workpiece was analyzed by scanning electron microscopy(SEM), which showed that the width of groove increased obviously with the increase of scratch depth and the grit interval distance. Results of the width of groove were consistent with the simulation results. The subsurface damage layer was analyzed by the method of HF acid etching, which showed that there was an area of cracks intersecting. The scratching force was measured by the threedimensional dynamometer of KISTLER, which showed that the second scratching force increased with the increase of scratching depth and the grit interval distance. The force in the second scratch was smaller than that in the first time, which was consistent with the Griffith fracture theory.展开更多
The unzipping process of double-stranded DNA is analysed using a discrete model at the base level [Chin. Phys. Lett. 22 (2005)1540]. The numerical results are consistent with the experimental observations on the for...The unzipping process of double-stranded DNA is analysed using a discrete model at the base level [Chin. Phys. Lett. 22 (2005)1540]. The numerical results are consistent with the experimental observations on the force-displacement behaviour including the sequence-dependence. We find that the hydrogen bond interaction in a base pair is crucially important to the force-displacement profile.展开更多
To study the seismic behavior of high strength concrete fi lled double-tube(CFDT) columns,each consisting of an external square steel tube and an internal circular steel tube,quasi-static tests on eight CFDT column sp...To study the seismic behavior of high strength concrete fi lled double-tube(CFDT) columns,each consisting of an external square steel tube and an internal circular steel tube,quasi-static tests on eight CFDT column specimens were conducted.The test variables included the width-to-thickness ratio(β1) and the area ratio(β2) of the square steel tube,the wall thickness of the circular steel tube,and the axial force(or the axial force ratio) applied to the CFDT columns.The test results indicate that for CFDT columns with a square steel tube with β1 of 50.1 and 24.5,local buckling of the specimen was found at a drift ratio of 1/150 and 1/50,respectively.The lateral force-displacement hysteretic loops of all specimens were plump and stable.Reducing the width-to-thickness ratio of the square steel tube,increasing its area ratio,or increasing the wall thickness of the internal circular steel tube,led to an increased fl exural strength and deformation capacity of the specimens.Increasing the design value of the axial force ratio from 0.8 to 1.0 may increase the fl exural strength of the specimens,while it may also decrease the ultimate deformation capacity of the specimen with β1 of 50.1.展开更多
Establishing the Lagrangian equation of double complex pendulum system and obtaining the dynamic differential equation,we can analyze the motion law of double compound pendulum with application of the numerical simula...Establishing the Lagrangian equation of double complex pendulum system and obtaining the dynamic differential equation,we can analyze the motion law of double compound pendulum with application of the numerical simulation of RK-8 algorithm.When the double compound pendulum swings at a small angle,the Lagrangian equation can be simplified and the normal solution of the system can be solved.And we can walk further on the relationship between normal frequency and swing frequency of double pendulum.When the external force of normal frequency is applied to the double compound pendulum,the forced vibration of the double compound pendulum will show the characteristics of beats.展开更多
The present investigation is motivated by finding and developing an easily understandable solution in the context of unified quantum and gravitational theories. Model-based methods are applied, with emphasis on struct...The present investigation is motivated by finding and developing an easily understandable solution in the context of unified quantum and gravitational theories. Model-based methods are applied, with emphasis on structural descriptions by introducing some strong hypotheses. A subset of the introduced hypotheses led to a surprising understanding of the internal structure and construction of quarks, neutrons, protons and more complex atomic nuclei. The research work therefore focused mainly on the model-based interpretation of subatomic processes. The results obtained so far and presented in this paper are new. They consist of a generic description model for the structure of atomic nuclei. This model contains two important structural links that originate from the initial phase of the cosmological big bang. They hold atomic parts together and are involved in many known nuclear fusion and fission processes. Modifications of them, including the electron-positron annihilation process, are necessary and will be described. A new interpretation of the strong forces from the Standard Model is possible and will be given. In addition, the formation processes for electron and positron particles are considered. Based on the structural relationships, a deeper understanding of matter transformations (transmutations), early cosmological processes and dark matter has been achieved. All challenges of this work are the logical conclusions from the used hypotheses on two structural links. They need to be further investigated and verified by theoretical and experimental works. The postulated particle in this paper, as accompanying product in the electron-positron annihilation, will play a major role for the future investigations.展开更多
Large numbers of precision fusion excitation functions were fitted in the literature using the nucleus-nucleus interaction potential having the Woods-Saxon shape. The diffuseness of this potential fusion ranges from 0...Large numbers of precision fusion excitation functions were fitted in the literature using the nucleus-nucleus interaction potential having the Woods-Saxon shape. The diffuseness of this potential fusion ranges from 0.75 to 1.5 fm. This is much larger than the value of 0.65 fm required by the elastic scattering data. Trying to resolve this contradiction we develop the dissipative trajectory model based on the density-dependent M3Y NN-forces folded with the nuclear matter distribution. Resulting potential possesses the normal diffuseness about 0.65 fm. With this potential we reach the agreement with the data for 16O+208Pb, 28Si+208Pb, 32S+208Pb reactions within 5%.展开更多
基金Project(2011-0006548)supported by Basic Science Research Program through the National Research Foundation of Korea
文摘Aluminum foam is widely used in diverse areas to minimize the weight and maximize the absorption of shock energy in lightweight structures and various bio-materials.It presents a number of advantages,such as low density,incombustibility,non-rigidity,excellent energy absorptivity,sound absorptivity and low heat conductivity.The aluminum foam with an air cell structure was placed under the TDCB Mode II tensile load by using Landmark equipment manufactured by MTS to examine the shear failure behavior.The angle of the tapered adhesively-bonded surfaces of specimens was designated as a variable,and three models were developed with the inclined angles differing from one another at 6°,8° and 10°.The specimens with the inclined angles of 6°,8° and 10° have the maximum reaction forces of 168 N,194 N when the forced displacements are 6,5 and 4.2 mm respectively.There are three specimens with the inclined angles of 10°,8° and 6° in the order of maximum reaction force.As the analysis result,the maximum equivalent stresses of 0.813 MPa and 0.895 MPa happened when the forced displacements of 6 mm and 5 mm proceeded at the models of 6° and 8°,respectively.A simulation was carried out on the basis of finite element method and the experimental design.The results of the experiment and the simulation analysis are shown not different from each other significantly.Thus,only a simulation could be confirmed to be performed in substitution of an experiment,which is costly and time-consuming in order to determine the shearing properties of materials made of aluminum foam with artificial data.
文摘Fines migration is defined as separation of a Nano-sized particle by fluid flow in porous media and its migration along some distances and its entrapment in a narrow pore throat or its settlement on pore wall. Although this phenomenon happens in scales of Nano-meters, it can lead to sever irretrievable damages. This damage includes permeability reduction that causes drastic oil recovery reduction. There are several forces impacting a fine that is placed on a pore wall. Some of most important forces affecting settlement of a fine in porous media in presence of a fluid are electrical forces. Electrical forces consist of several long and short range forces. This study focuses on a long range force called Double Layer Force (DLF) that beside Van der Waals is one of most powerful electrical forces. DLF is a repulsive force that can repel a particle from pore wall and result separation of a Nano-sized solid which subsequently moves along with flowing fluid and clogs a throat. The DLF depends on the solid material (reservoir rock and fine) and fluid properties (i.e. ionic strength, pH). This study investigates how each of these parameters affects DLF and introduces proper conditions for reservoir water flooding for controlling fines migration.
基金the National Natural Science Foundation of China(Grant Nos.11674231 and 12074261)the Shanghai Natural Science Foundation,China(Grant No.20ZR1441600).
文摘In strong-field double ionization,two electrons are ionized by intense laser field.These two electrons move in the laser field and the state is described by a Coulomb-Volkov state,where the repulsive Coulomb state describes the relative motion of the two electrons and the Volkov state describes the center-of-mass motion of the two electrons in the laser field.In the frame of scattering theory,we derive a simple analytical formula of the double ionization of He-like atoms.The effect of the Coulomb force between two electrons on the double ionization process is discussed.Numerical studies disclose that the Coulomb force enhances the ionization rate of high-energy electrons but suppresses the ionization rate of the lowest-energy electrons.
文摘While atomic force microscopy (AFM) has been increasingly applied to life science, artifactual measurements or images can occur during nanoscale analyses of cell components and biomolecules. Tip-sample convolution effect is the most common mechanism responsible for causing artifacts. Some deconvolution-based methods or algorithms have been developed to reconstruct the specimen surface or the tip geometry. Double-tip or double-probe effect can also induce artifactual images by a different mechanism from that of convolution effect. However, an objective method for identifying the double-tip/probe-induced artifactual images is still absent. To fill this important gap, we made use of our expertise of AFM to analyze artifactual double-tip images of cell structures and biomolecules, such as linear DNA, during AFM scanning and imaging. Mathematical models were then generated to elucidate the artifactual double-tip effects and images develop during AFM imaging of cell structures and biomolecules. Based on these models, computational formulas were created to measure and identify potential double-tip AFM images. Such formulas proved to be useful for identification of double-tip images of cell structures and DNA molecules. The present studies provide a useful methodology to evaluate double-tip effects and images. Our results can serve as a foundation to design computer-based automatic detection of double-tip AFM images during nanoscale measuring and imaging of biomolecules and even non-biological materials or structures, and then personal experience is not needed any longer to evaluate artifactual images induced by the double-tip/probe effect.
文摘-In this paper, the maximum entropy spectral, the cross-spectral and the frequency response analyses are madeon the basis of the data of monthly mean sea levels at coastal stations in the Bohai Sea during 1965-1986. The results show that the annual fluctuations of the monthly mean sea levels in the Bohai Sea are the results of the coupling response of seasonal variations of the marine hydrometeorological factors. Furthermore, the regression prediction equation is obtained by using the double screening stepwise regression analysis method . Through the prediction test , it is proved that the obtained results are desirable.
文摘In the impact tests of soft materials, we sometimes observe a thorn shape in the rising segment of the impact force waveform. However, the reason for the occurrence of the thorn shape has not been made clear. In this study, thorn-shape waveforms of several soft materials are measured using compact drop test equipment under the condition of a flat frontal impact. A flat frontal impact is the condition where a drop hammer with a flat bottom surface strikes a plate-like soft material in the normal direction. Synchronized impact forces are measured using two sensors installed on both the drop hammer side and the floor side. The examined soft materials are a sponge sheet, sponge rubber sheet, gel sheet, rubber sheet, flat oil clay, low-rebound urethane foam, cork sheet, sliced ham, pork ham steak, and pork. Based on the test results, the features of the thorn-shape waveforms are discussed from a bird’s-eye view. Furthermore, the occurrence mechanism of the thorn-shape waveforms is discussed from the viewpoint of viscosity discontinuity and the double-strike phenomenon.
基金Funded by the National Key Research and Development Program of China(No.2016YFB1102204)the Major State Basic Research Development Program of China(973 Program)(No.2011CB013202)the National Natural Science Foundation of China(No.51175126)
文摘The elastic-plastic transition regime and brittle-ductile transition regime in scratch process for optical glass BK7 were analyzed based on the Hertzian equation and the stress ratio theory which was proposed by Wei. The interacting scratch process for optical glass BK7 with the grit interval distance as the variable was simulated by the ABAQUS software of finite element simulation based on the energy fracture theory. Double grits interacting scratch test for optical glass BK7 was carried out on the DMG ULTRASONIC 70-5 linear, by which the reliability of finite element simulation was verified. The surface morphology of the workpiece was analyzed by scanning electron microscopy(SEM), which showed that the width of groove increased obviously with the increase of scratch depth and the grit interval distance. Results of the width of groove were consistent with the simulation results. The subsurface damage layer was analyzed by the method of HF acid etching, which showed that there was an area of cracks intersecting. The scratching force was measured by the threedimensional dynamometer of KISTLER, which showed that the second scratching force increased with the increase of scratching depth and the grit interval distance. The force in the second scratch was smaller than that in the first time, which was consistent with the Griffith fracture theory.
基金Supported by the National Natural Science Foundation of China under Grant No 10474109, the 100 Persons Project of Chinese Academy of sciences, the Foundation of Ministry of Personnel of China, and Shanghai Supercomputer Center of China.
文摘The unzipping process of double-stranded DNA is analysed using a discrete model at the base level [Chin. Phys. Lett. 22 (2005)1540]. The numerical results are consistent with the experimental observations on the force-displacement behaviour including the sequence-dependence. We find that the hydrogen bond interaction in a base pair is crucially important to the force-displacement profile.
基金the National Natural Science Foundation of China under Grants Nos.51261120377 and 51008173
文摘To study the seismic behavior of high strength concrete fi lled double-tube(CFDT) columns,each consisting of an external square steel tube and an internal circular steel tube,quasi-static tests on eight CFDT column specimens were conducted.The test variables included the width-to-thickness ratio(β1) and the area ratio(β2) of the square steel tube,the wall thickness of the circular steel tube,and the axial force(or the axial force ratio) applied to the CFDT columns.The test results indicate that for CFDT columns with a square steel tube with β1 of 50.1 and 24.5,local buckling of the specimen was found at a drift ratio of 1/150 and 1/50,respectively.The lateral force-displacement hysteretic loops of all specimens were plump and stable.Reducing the width-to-thickness ratio of the square steel tube,increasing its area ratio,or increasing the wall thickness of the internal circular steel tube,led to an increased fl exural strength and deformation capacity of the specimens.Increasing the design value of the axial force ratio from 0.8 to 1.0 may increase the fl exural strength of the specimens,while it may also decrease the ultimate deformation capacity of the specimen with β1 of 50.1.
基金NUIST’s curriculum reform project of“integration of specialty and innovation”.
文摘Establishing the Lagrangian equation of double complex pendulum system and obtaining the dynamic differential equation,we can analyze the motion law of double compound pendulum with application of the numerical simulation of RK-8 algorithm.When the double compound pendulum swings at a small angle,the Lagrangian equation can be simplified and the normal solution of the system can be solved.And we can walk further on the relationship between normal frequency and swing frequency of double pendulum.When the external force of normal frequency is applied to the double compound pendulum,the forced vibration of the double compound pendulum will show the characteristics of beats.
文摘The present investigation is motivated by finding and developing an easily understandable solution in the context of unified quantum and gravitational theories. Model-based methods are applied, with emphasis on structural descriptions by introducing some strong hypotheses. A subset of the introduced hypotheses led to a surprising understanding of the internal structure and construction of quarks, neutrons, protons and more complex atomic nuclei. The research work therefore focused mainly on the model-based interpretation of subatomic processes. The results obtained so far and presented in this paper are new. They consist of a generic description model for the structure of atomic nuclei. This model contains two important structural links that originate from the initial phase of the cosmological big bang. They hold atomic parts together and are involved in many known nuclear fusion and fission processes. Modifications of them, including the electron-positron annihilation process, are necessary and will be described. A new interpretation of the strong forces from the Standard Model is possible and will be given. In addition, the formation processes for electron and positron particles are considered. Based on the structural relationships, a deeper understanding of matter transformations (transmutations), early cosmological processes and dark matter has been achieved. All challenges of this work are the logical conclusions from the used hypotheses on two structural links. They need to be further investigated and verified by theoretical and experimental works. The postulated particle in this paper, as accompanying product in the electron-positron annihilation, will play a major role for the future investigations.
文摘Large numbers of precision fusion excitation functions were fitted in the literature using the nucleus-nucleus interaction potential having the Woods-Saxon shape. The diffuseness of this potential fusion ranges from 0.75 to 1.5 fm. This is much larger than the value of 0.65 fm required by the elastic scattering data. Trying to resolve this contradiction we develop the dissipative trajectory model based on the density-dependent M3Y NN-forces folded with the nuclear matter distribution. Resulting potential possesses the normal diffuseness about 0.65 fm. With this potential we reach the agreement with the data for 16O+208Pb, 28Si+208Pb, 32S+208Pb reactions within 5%.